Rukket Sports LED BASKETBALL NET Manual

LED BASKETBALL NET
SET-UP INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
Please use adult supervision and follow the instructions when setting up and using
this net. Regular use or abuse will eventually strain the netting and may break it. Do
not pull on net or wires once the net is assembled to the hoop. Pulling on the net or
wires could result in failure or damage to the product.
PAGE 1
WARNING
V1
RukketSports
Our video instructions provide the best guidance for setting up your LED Basketball Net.
They can be viewed online at
V1

LED BASKETBALL NET
SET-UP INSTRUCTIONS
1. Locate the long loops at
the top of the LED Basketball
Net.
2. Push the net loop through
the rim hook.
4. Pull the net loop tight and
make sure it's attached.
5. Insert 3 AA batteries (not
included) into the battery
pack.
PAGE 2
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1
3. Attach the net loop to the
rim hook.
6. Carefully remove the tape and
place one side of the 3M Velcro tape
on the back of the battery pack, then
remove the other side of the tape
and attach the battery pack to the
back of the basketball backboard
underneath the hoop or on the
backside of the pole. NOTE: It is
important to place the box in a place
that it will NOT be impacted by the
ball during play. Impacting the
battery box could result in product
failure.
7. Use the remote to turn the
light on and off and to adjust
the color and/or light pattern.
8. Now you're ready to play
all day and into the night
with your LED Basketball Net
from Rukket Sports!