Then attach both end legs
(Fig. B)
1. Join the two slightly bent
pipes together (Fig. A) poles,with coupling tubes at
the top, into the angled pipes
on the metal base.
2. Install the two lower fiberglass
WARNING
Please use adult supervision and follow the instructions when setting up and using this net.
Regular use or abuse will eventually strain the netting and may break it. Do not stand behind
the net. This net is not intended for personal protection. This net deflects fast moving objects,
so people should be at least ten (10) feet away.
PRIOR TO USE
Inspect the netting and frame for damage or wear. Make sure the frame and net are assem-
bled correctly and on a flat surface, at least ten (10) feet away from structures and vehicles.
The user should be positioned directly in front of the net. Failure to follow these precautions
could result in serious injury or damage to property.
3. Thread a fiberglass pole
through one of the net's sleeves
making sure the net is right side up
(white loops at the top corners and
black bungees at the bottom corners).
4. Repeat for the other side.
5. Insert an upper fiberglass
pole into one of the lower pole's
coupling tube. The metal knob
should be at the top.
6. Gripping the assembled
fiberglass pole, slide the net's
sleeve up the pole and loop
the white rope onto the metal
knob on top.
7. Insert the remaining upper
fiberglass pole into the
remaining lower pole.
8. Grip the pole and slide the
sleeve up before looping the
white rope around the metal
pole top.
9. Loop the black elastic
bungees over the metal posts
located on the outside of each
end leg. 10. Wrap the velcro
around the frame (X in Fig. 8).
V1
SOCK IT! BASEBALL/SOFTBALL NET
assembly INSTRUCTIONS
