RunCam Thumb User manual

RunCam Thumb
Camera manual
Please read this manual carefully before use and keep it in a safe place

Function indication
MicroUSB
Button (power/shutter button)
Standard installation direction
Lens cover
1.25mm 2P
Indicator light(Red/Green)
2
2
3
3
6
6
5
5
4
4
1
1

Micro SD Card
Support up to 128G, high-speed cards (above Class10) are recommended
Step 1 Step 2
MicroSD Card

Camera connection operation
SpeedyBee f7 mini pro
flight controller
5VG
Step 1: Camera power connection
Step 2: Camera operation
Connect to the power supply
to turn on directly Boot into recording mode Short press the power/shutter button to start/stop video recording

Connect to the computer
After turning on Thumb, connect it to the computer with a USB cable and it will be
recognized as a removable disk.
Note: If it cannot be recognized after connecting to the computer, please confirm that there is a microSD card inserted in the
Runcam Thumb; if the files in the microSD card cannot be read normally, please replace the USB cable or the computer USB
interface and try again.

Firmware upgrade
Firmware upgrade status (green light flashes slowly, the upgrad
soon if the green light flashes quickly, the camera is shut dow
completed)
Please make sure that the USB power supply or terminal power su
before upgrading.
Manually copy the firmware file (Thumb.bin) to the root directo
microSD card. For specific steps,
please refer to: https://runcam.com/download/Thumb.
If you want your Runcam Thumb to get the latest features and pe
make sure that the camera software you are using is the latest
Technical Support
Please visit: https://support.runcam.com/hc/en-us
Gyroscope Data Generated Function
Create a csvopen.txt file manually to the root directory of the camera's microSD card.
It will take effect only after the camera is restarted. At this time, the camera will keep
1080p50fps video and gyroscope data at the same time in the SD card.

Parameters Table
Product Name
Resolution
Video Format
Gyro
Communication Interface
Support Micro SD Card Capacity
USB Power Input/Terminal Power Supply
Power Consumption
Net Weight
Runcam Thumb
1080P@60FPS
MP4
Built-in
Micro USB
128G Max
5.0V
280ma@5V
9.8g