Russell Hobbs UV Pro RHBV1001 User manual

Model Number: RHBV1001
UV Pro
Handheld UV Vacuum Cleaner
For Customer Services & Spare Parts please call0345 2097461
Opening times: Monday -Friday 8am –8pm & Saturday 9am –1pm
Or visit us at www.productcare.co.uk
PLEASE RETAIN
FOR FUTURE REFERENCE

Contents
Page
Safety
instructions
…………………………….………..
2-5
Feature diagram
………………………………....…..
6
Unpacking your
vacuum cleaner
……………………………….……..
7
Assembling your vacuum cleaner
………………………………………
8
How to use your vacuum cleaner
………………………………………
9
How to empty the dust
container
and clean the filter
………………………………………
10
How to change the UV bulb
………………………………………
11
How to change
the fuse
………………………………………
12
Trouble
shooting
………………………………………
13
Connection to the mains supply
………………………………………
14
Notes
………………………………………
15
-
17
Guarantee & Customer Services
………………………………………
18
Spare Parts
………………………………………
19
2
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am –8pm & Saturday 9am –1pm
Or visit us at www.productcare.co.uk
Thank you for purchasing your UV Pro Handheld Stick Vacuum.
To get the best from your new cleaner, take a few moments to read these
instructions and keep them in a safe place for future reference.
Should you require any further assistance, our friendly Product Care team will
be happy to help.

Safety instructions
WARNING:
•It is hazardous for anyone other than a competent person
to carry out any service or repair operation that involves
the removal of a cover which gives protection against
exposure to electrical parts.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
•This product is intended for household use only.
Do not use outdoors.
•This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children should not play with the
appliance. Cleaning and user maintenance should not be
made by children unless they are older than 8 and
supervised. Keep the appliance and its cord out of reach of
children less than 8 years.
•Do not operate this appliance for anything other than its
intended use.
•Do not immerse in water or other liquids for cleaning.
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
3

Safety instructions
•Do not direct at people, animals, electrical outlets, or
equipment containing electrical components.
•Unplug from outlet when not in use. Do not leave the
cleaner unattended while plugged in.
•Do not use with damaged cord or plug.
•Do not use vacuum cleaner if it has been dropped,
damaged, left outdoors or dropped into water.
•Keep the vacuum cleaner away from water; do not allow it
to get wet. If unit is wet, do not plug unit into wall socket
or turn unit on.
•Do not handle the vacuum cleaner with wet hands.
•Do not pull or carry by cord, use cord as a handle, close
door on cord, pull cord around sharp corners or edges, or
expose cord to heated surfaces.
•Do not unplug by pulling on cord.
•To protect against electrical shock do not immerse cord,
plug, or appliance in water or other liquid.
•Unplug from the mains outlet when not in use, before
putting on and taking off parts, and before cleaning.
•The use of accessory attachments not recommended by
the appliance manufacturer may cause fire, electric shock
or injury. Only use the accessories supplied by the
manufacturer.
•Do not let the cord hang over the edge of the worktop, or
touch hot surfaces.
4

Safety instructions
•This cleaner is intended for internal household use only, do
not use outside or for anything other than its’ intended
purpose.
•Do not use this vacuum to pick up water or any other
liquids, combustible substances or hot/burning objects.
•Only use the unit when fully assembled.
•Never place your fingers or other objects into any part of
the cleaner. Be aware that loose clothing or hair may
become trapped in the cleaner if improperly used.
•Before use, ensure that all of the air vents of the cleaner
are clear and there is no restriction of air flow.
•Caution: Exhaust air discharged from the sides of the
cleaner may extinguish a gas fire, pilot light, or disturb
ashes in an open fire. Always avoid directing the cleaner
toward naked flames.
•Important: This cleaner has a thermal safety device which
automatically cuts off the power supply in case of over
heating. If the safety device has switched the cleaner off,
unplug from the mains and allow the cleaner to cool
down. Once the cleaner has cooled it can be plugged back
in to the mains and used as normal. This takes
approximately 15 minutes to reset.
5

1
Feature diagram
6
1. Handle
2. Power Switch
3. Dust Container
4. LED Light
5. UV Lamp
5
2
3
4

Unpacking your vacuum cleaner
7
Before using your vacuum cleaner
Remove all packaging and lay out the separate components.
Check the unit after unpacking for any visual damage such as:
•Misaligned or damaged parts
•Damage to the main body and separate components
•Damage to the plug or cable.
If you can see any damage do not use the vacuum cleaner
and contact customer services

1. Ensure the HEPA filter is correctly inserted in the Dust Tank.
Assembling your vacuum cleaner
8
2. Insert the Dust Tank into the Vacuum Cleaner Unit.

How to use your vacuum cleaner
9
1. Plug the power cord into a wall socket.
2. Push down the power switch on
the top of the machine to switch the
cleaner on and off.
The Russell Hobbs UV Pro is designed for use on soft furnishings such at
mattresses, sofas, rugs and upholstery. It’s purpose is to tackle the
allergens such as dust mites, bed bugs, bacteria and pollen - all things
that may worsen the symptoms of asthma, eczema and other
irritations.
The UV-C light attacks the DNA of bed bugs, dust mites and bacteria
such as E-Coli, which prevents them from reproducing and spreading,
effectively sterilising your mattresses and soft furnishings
3. Ensure the two large wheels on the underside of the product are in
contact with a flat surface, such as a mattress, then slowly move the
vacuum cleaner back and forth over the surface.
Important: The UV light will only activate if both large wheels are in
contact with the surface being vacuumed. This function is indicated
by the LED lights on the front of the unit.

How to empty the dust container
and clean the filter.
Pull out the HEPA filter and tap
the dust container over a bin to
empty.
Important: You may wish to
empty the dust container
outdoors as emptying may create
a dust cloud.
Ensure the unit is switched off.
Make sure to empty the dust
container before it gets full.
Grasp the dust container and
pull upwards.
10
Remove the sponge filter from the
HEPA filters To clean, remove excess
dust from the filter using a soft brush.
Wash in warm water and allow to dry
for 24 hours.
Once dry, replace the filters and the
dust container into the vacuum
cleaner unit.