Russell Hobbs RHHV1001 User manual

RHHV1001 Revision 6
Operating Manual
ALL SURFACES
SUITABLE FOR USE ON
Russell Hobbs
Cordless Handheld Mini Vac
Model Number: RHHV1001

RHHV1001 Revision 6
GUARANTEE
At Russell Hobbs, we take all our customer feedback seriously.
Feel free to contact our Product Care Team, on 0345 209 7461 who will be more
than happy to assist you.
This product is guaranteed for 12 months from the date of the original purchase. If any
defect arises due to faulty materials or workmanship, the faulty product must be
returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
•The product must be returned to the retailer with the original proof of purchase.
•The product must be installed and used in accordance with the instructions
contained in this instruction guide and any other instructions for use which are
supplied.
•It must be used for domestic purposes only and for its intended use.
•This guarantee does not cover wear and tear, damage, misuse or consumable
parts.
•This does not affect your statutory rights.
REGISTER
ONLINE
Visit our website to
register your full parts
and labour guarantee online.
mda.russellhobbs.com
REGISTER
BY PHONE
Call our friendly Product Care team.
0345 209 7461
Note your serial number below for future reference.
Image for
illustration
purposes only
RUSSELL HOBBS CONTACT DETAILS
Website: mda.russellhobbs.com
Telephone: [phone]
Address: Product Care Customer Service, Green Bank
Business Park, Hindley Green, Wigan, WN2 4AY

RHHV1001 Revision 6
IMPORTANT SAFETY INSTRUCTIONS
•It is hazardous for anyone other than a competent person to
carry out any service or repair operation that involves the
removal of a cover which gives protection against exposure to
electrical parts.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard. Do not use with damaged cord or
plug. Do not run the vacuum cleaner over any cables, or its
own power cable. As this will result in damaging the cable.
•This product is intended for household use only. Do not use
outdoors.
•This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children should not play with the appliance. Cleaning and user
maintenance should not be made by children without
supervision.
•Do not direct at people, animals, electrical outlets, or
equipment containing electrical components.
•Do not use this appliance to pick up water or any other liquids,
combustible substances or hot/burning objects.
•Unplug from outlet when not in use, and before putting on and
taking off parts, and before cleaning. Do not leave unattended
whilst plugged in.

RHHV1001 Revision 6
IMPORTANT SAFETY INSTRUCTIONS
•Do not use appliance if it has been dropped, damaged, left
outdoors or dropped into water. Do not operate this
appliance for anything other than its intended use.
•Keep the appliance away from water; do not allow it to get
wet.
•If unit is wet, do not plug unit into wall socket or turn unit on.
Do not immerse in water or other liquids for cleaning. Do not
handle the appliance with wet hands.
•Do not pull or carry by cord, use cord as a handle, close door
on cord, pull cord around sharp corners or edges, or expose
cord to heated surfaces.
•The use of accessory attachments not recommended by the
manufacturer may cause fire, electric shock or injury. Only use
the accessories supplied by the manufacturer.
•Only use the appliance when fully assembled.
•Never place your fingers or other objects into any part of the
appliance. Be aware that loose clothing or hair may become
trapped in the cleaner if improperly used.
•Caution: Exhaust air discharged from the sides of the appliance
may extinguish a gas fire, pilot light, or disturb ashes in an
open fire. Always avoid directing the appliance toward naked
flames. Before use, ensure that all of the air vents are clear and
there is no restriction of air flow.

RHHV1001 Revision 6
YOUR VACUUM
A.Silicone nozzle
B.Wall bracket
C.Crevice nozzle
D.Dirt container
E. Dust container release button
F. Power (on / off) switch
G.Power indicator
H.Adaptor and cable
I. Filter
A
B
C
D
E
F
G
H
I

RHHV1001 Revision 6
NOTES

RHHV1001 Revision 6
CHARGING THE INTERNAL BATTERIES
•The internal Lithium battery is supplied with a small amount of
charge but it will be necessary to initially charge for 4-5 hours
approx. before using the appliance.
•Ensure that the power switch is the OFF.
•Insert the adaptor cord into the DC jack at the end of the
vacuum and plug the adaptor into the mains supply socket.
•The indicator will illuminate red and flash to show that the unit
is in charging mode.
•Allow the unit to fully charge. When the unit is fully charged
the indicator will turn blue. The vacuum can now be used up
to 20 minutes.
Notes
•The indicator will turn red when the battery is running low and
needs to be recharged. If recharge is not started, the indicator
will flash until the vacuum powers off.
•Only charge or recharge the vacuum indoors.
•Do not recharge the battery when the air temperature is
below 0°C or above 37°C.
•Batteries become hot after heavy use and will become difficult
to charge. Allow to cool and wait about an hour before
recharging.

RHHV1001 Revision 6
WALL MOUNTING
•Ensure that there are no power cables or other conduits or
pipes in the wall at the location where you intend to bore the
holes for the wall bracket
Important Note: Drilling into a current-carrying electric cable
can be potentially fatal
1. Place the barrel plug of the mains adapter into the wall
bracket as illustrated below
90⁰

RHHV1001 Revision 6
WALL MOUNTING
2. Feed the cable through the cable routing and then fit the
jack through the hole in the base of the bracket so that it
is firmly in place
3. Select a suitable installation location for the wall bracket.
It must be possible to remove the handheld vacuum
cleaner easily and there must be an accessible mains
power socket for the mains adapter
4. Drill two holes about 34 mm apart. Use the wall bracket
to mark the holes to ensure the correct spacing, then drill
holes must be suitable for 6 mm wall plugs
5. Push the wall plugs into the holes and then screw the wall
bracket firmly into place using the screws
6. You can place the nozzles on the accessory’s holder to the
side
7. Connect the mains adapter to a mains power socket

RHHV1001 Revision 6
INSTALLING YOUR VACUUM
•Insert the vacuum cleaner into the wall bracket, plug the
adaptor into the mains socket and recharge as necessary.