Rutland County Garden Furniture Burley User manual

Assembly Instructions
Burley/Greetham 6ft
tool store
1
Before you commence the assembly process we recommend that you read these instructions thoroughly
beforehand to familiarise yourself with the assembly process and to also check that you have the correct
components. If for any reason you need assistance, you can find our contact details on the final page of
these instructions.
We highly recommend that any assembly is carried out on a flat, level surface if possible and that you
use another person to assist you if necessary.
Package contents
Tools required
2 x End panels
1 x Back panel
1 x Base
1 x Floor
1 x Roof
1 x Door
16 x Short green screws
8 x Long green screws (For the base only)
12 x 38mm black screws (For doors only)
2 x Spacer blocks
Electric screwdriver with No2 Pozidrive bit
Or No2 Pozidrive Screwdriver
Burley Tool Store

Burley/Greetham 6ft tool store
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 11025348 VAT No: 282569762
2
Step 1
Step 2
Ensure that you have all of the correct parts as listed
on the front page of these instructions, including any
fixings.
Stand the left hand end panel (or right hand for the
reversed roof version) upright on a flat, level surface.
Step 3
Step 4
Arrange the 2 spacer blocks on the ground, adjacent
to the end panel as shown in the photo above. Now
place a back panel on the blocks, at 90° to the end
panel, aligning the 2 panels ready for fixing.
Using the shorter green screws provided, attach the
batten on the back panel to the post of the end
panel using the pre-drilled holes, ensuring that the
batten remains vertically aligned to the post.

Burley/Greetham 6ft tool store
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 11025348 VAT No: 282569762
3
Step 5
Step 6
Remove the blocks from beneath the back panel and
then slide the base into position as shown so that it
locates in the gaps in the side panel battens.
Now add the right end panel, again locating the base
in the gaps in the side panel battens.
Step 7
Step 8
Secure the right side panel in place with shorter
green screws.
Attach the base to the end panel front posts using 2
of the longer green screws for each side.

Burley/Greetham 6ft tool store
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 11025348 VAT No: 282569762
4
Step 9
Step 10
Now attach the base to the end panel rear posts,
again using 2 of the longer green screws for each
side.
Lay the floor section in the base and then gently
lower the roof into place as shown.
Step 11
Step 12
Check that the front batten ends sit flush with the
posts as shown. Now attach the roof to each end
panel post with shorter green screws.
Secure the rear of the roof using shorter green
screws as shown. Your log store is now complete. If
your log store came with doors, proceed to step 13.

Burley/Greetham 6ft tool store
Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,
Aslackby, Sleaford, Lincs, NG34 0HZ.
Company No: 11025348 VAT No: 282569762
5
Step 13
Step 14
Place a spacer block at the front of the log store
adjacent to the front end post and rest the hinge
side of the appropriate door on the block, aligning it
vertically and horizontally for a good fit. Now use
four of the supplied black hinge screws to affix the
hinge to the post.
Align the top hinge in place, ensuring that the gap
between the door and post is consistent at top and
bottom then secure the top hinge in place using
more of the black hinge screws
Step 15
Step 16
To fit the latch keeper plate, shut the door and hold
the latch in the horizontal position. Now fit the
keeper and mark its correct fixing position on the
post using a pencil or bradawl before securing it in
place using the screws provided.
Your Burley/Greetham tool store is now complete.
We hope that you found your product quick and easy to assemble but if not and you require any further assistance or have any
questions you can contact us by telephone on: 01778 440803
Email: [email protected]
www.rutlandcountygardenfurniture.co.uk