Rutland county garden furniture Langham boot/log store User manual

Assembly Instructions

Langham boot/log Store

Before you commence the assembly process we recommend that you read these instructions thoroughly

beforehand to familiarise yourself with the assembly process and to also check that you have the correct

components. If for any reason you need assistance, you can find our contact details on the final page of

these instructions.

We highly recommend that any assembly is carried out on a flat, level surface if possible and that you

use another person to assist you if necessary.

Package contents

Tools required

2 x End panels

2 x Base support

1 x Back panel

1 x Roof

1 x Lattice

1 x Roof support

8 x Longer green screws

14 x Shorter green screws

2 x spacer blocks

Electric screwdriver with No2 Pozidrive bit

Or No2 Pozidrive Screwdriver

Langham Boot Store

Langham boot/log Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Step 1

Step 2

Stand the left side end panel upright on a flat

surface.

Place the 2 spacer blocks as shown, so that the back

panel can be mated to the end panel at 90°. Please

ensure that the slats in the back panel aren't upside

down.

Step 3

Step 4

Secure the back panel to the side panel by using 2

shorter green screws.

Now repeat the same process for the other end

panel.

Langham boot/log Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Step 5

Step 6

Insert one of the base supports into the gap in the

battens at the bottom of the front posts, ensuring

that the supporting batten on the base support is in

the lowermost position.

Now secure both ends of the base support using 2

longer green screws as shown.

Step 7

Step 8

Now insert the rear base support, again ensuring

that the batten running along its length is correctly

oriented.

Now you can lower the lattice into the base of store

in preparation for attaching the roof.

Langham boot/log Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Step 9

Step 10

Place the roof on the store and adjust its positioning

so that the roof battens are flush with the front

posts.

Secure the roof to the front posts using 2 of the

shorter green screws on both sides.

Step 11

Step 12

Now secure the rear of the roof, this time using a

single short green screw in each side.

Line up the roof support so that is centred across the

store and butted up to the underside of the roof.

Secure in place with 2 of the remaining short green

screws in each end.

Langham boot/log Store

Rutland County Garden Furniture Ltd, Ashbourne House, 2 Dovecote Meadows,

Aslackby, Sleaford, Lincs, NG34 0HZ.

Company No: 7670072 VAT No: 151744027

Step 13

Your Langham boot store is now complete.

We hope that you found your product quick and easy to assemble but if not and you require any further assistance or have any

questions you can contact us by telephone on: 01778 440803

Email: [email protected]

www.rutlandcountygardenfurniture.co.uk

Table of contents

Other Rutland County Garden Furniture Outdoor Storage manuals