Rutus OS-2 User manual

Wireless receiver for headphones
RUTUS OS-2
USER'S MANUAL

BATTERY CHARGING
Before using the receiver for the first time, fully charge the built-in rechargeable
battery. Any USB charger with an output voltage of 5V can be used for charging
(cable is included). The LED lights up red while the battery is charging. The receiver is
equipped with a charging process controller, after completing the charging the diode
turns off and the battery is disconnected from the charger. Thanks to this, the
receiver can be left to be charged overnight without fear of shortening the battery
life. Charging time is approx. 8 hours.
HEADPHONES
The receiver works with any set of stereo headphones.
TURN ON THE RECEIVER
The receiver is turned on by pressing the power on button. The LED indicating the
battery charge level lights up: green - over 50%, yellow - 50-30%, red - below 30%. The
receiver cannot be turned off with the power switch. The receiver will automatically
turn off after 40 seconds if it is not receiving a signal from the detector. The
operating time on a fully charged battery is approx. 15-20 hours. Blinking of the red
diode and a sound signal means a discharged battery, the receiver will turn off
automatically.
PAIRING WITH THE DETECTOR
1. Make sure the receiver is turned off.
2. Set the pairing screen in the detector, according to the detector's instruction
manual.
3. The detector screen will display a 3-numbers individual receiver number (Atrex,
this number is not the same as the serial number of the receiver) or double arrow
(Versa).
4. Pairing is complete. After setting any channel number in the detector, the receiver
starts working with the detector.
NOTE: The receiver only receives the signal from the detector with which it is
currently paired. The receiver can be paired multiple times with different detectors.
CHANNEL SELECTION
The channel selection is done only in the detector. If there is more than one detector
with the OS-2 receiver in the field at the same time, it should be ensured that each
has a different channel number set. The receiver automatically selects the channel
on which there is transmission from the paired detector.

EU DECLARATION OF CONFORMITY
Manufacturer: RUTUS Arkadiusz Rutyna, ul. Krakowska 32, 84-230 Rumia,
Poland
Product: RUTUS OS-2
The manufacturer hereby states that this product is in accordance with the
requirement of Directive 2014/30/UE on the harmonization of the laws of the
Member States relating to electromagnetic compatibility with all later
amendments and supplements as it meets the requirement of the following
harmonised norms:
PN-EN 61000-4-2:2011
PN-EN 61000-4-3:2007 + A1:2008+ IS1:2009+A2:2011
PN-EN 61000-4-8:2010
PN-EN 6100-6-1:2008
PN-EN 55022:2011
This declaration conformity is issued under the sole responsibility of the
manufacturer.
GUARANTEE
This product is warranted against manufacturing defects for a period of 24
months from the original date of purchase. During the warranty period, the
defects will be repaired without charge for parts or labour. The warranty voids if
mechanical construction or electronic circuitry is tampered with or the receiver
is repaired by unauthorised party. Damage due to neglect, accidental damage or
misuse of this product is not covered by this warranty.
WARNING
It is not a toy. This instrument is intended to use by adults only – away from any
public places or buildings.
It cannot be operated by people with pacemakers or any electronic medical
implants.