RVS AIR-VUE RVS-AV-7ST User manual
2.4GHz 7" Digital Wireless Color
LCD Monitor
Instruction Manual
©Rear View Safety 2023
RVS-AV-7ST
2©Rear View Safety
Introduction........................................................................................3
Safety Information ........................................................................................4
Precautions ....................................................................................................7
1. Maintenance .............................................................................................7
2. Features .....................................................................................................3
3. Technical Specifications ..........................................................................9
4. Accessories ...........................................................................................10
5. Parts Identification ..................................................................................11
6. Remote Control Operation ......................................................................12
7. Basic Operation .......................................................................................13
8. Connection diagram ................................................................................14
9. Menu Operation and Functional Specification .................................15
9.1 Preview Interface ..................................................................................15
9.2 Main Menu ............................................................................................16
10. Installation Tips .....................................................................................20
10.1. Wireless system installation instruction ........................................21
11.Troubleshooting......................................................................................22
Warranty .......................................................................................................24
Disclaimer ....................................................................................................25
TABLE OF CONTENTS
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 3
IN THE BOX
Congratulations on purchasing an Air VueTM Digital Wireless Monitor!
With this manual, you can properly install and operate the unit. The wireless
monitor is intended to be installed as a supplemental aid to the standard rear-
view mirror that already exists in your vehicle. The monitor should not be used
as a substitute for your vehicle's standard rear-view mirror or any other mirror.
In some jurisdictions, it is unlawful for a person to drive a motor vehicle equipped
with a TV viewer or screen in front of the driver's seat or any location visible,
directly or indirectly, to the driver while operating the vehicle.
Please read all of the installation instructions
carefully before installing the product. Improper
installation will void manufacturer’s warranty.
1 x Monitor
1 x Antenna
1 x Fan Bracket
Cables
Manual
INTRODUCTION
4©Rear View Safety
SAFETY INFORMATION
USAGE : The Rear View Camera System is designed to help the driver safely
detect people and/or objects helping to avoid damage or injury. However, you
the driver, must use it properly. Use of this system is not a substitute for safe,
proper or legal driving.
• Never back up while looking at the monitor alone. You should always check
behind and around the vehicle when backing up, in the same way as you would
if the vehicle did not have the Rear View Camera System. If you back up while
looking only at the monitor, you may cause damage or injury. Always back up
slowly.
• The Rear View Camera System is not intended for use during extensive back-
up maneuvers or backing into cross trac or pedestrian walkways.
• Please, always remember, the area displayed by the Rear View Camera System
is limited. It does not display the entire panorama that is behind you.
PLEASE READ THE ENTIRE MANUAL AND FOLLOW THE INSTRUCTIONS
AND WARNINGS CAREFULLY. FAILURE TO DO SO CAN CAUSE SERIOUS
DAMAGE AND/OR INJURY, INCLUDING LOSS OF LIFE. BE SURE TO OBEY ALL
APPLICABLE LOCAL TRAFFIC AND MOTOR VEHICLE REGULATIONS AS IT
PERTAINS TO THIS PRODUCT. IMPROPER INSTALLATION WILL VOID
MANUFACTURER’S WARRANTY.
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 5
SAFETY INFORMATION
INSTALLATION
Electric shock or product malfunction may occur if this product
is installed incorrectly.
• Use this product within the voltage range specified. Failure to do so can
cause electronic shock or product malfunction.
• Take special care when cleaning the monitor.
• Make sure to firmly ax the product before use.
• If smoke or a burning smell is detected, disconnect the system immediately.
• Where the power cable may touch a metal case, cover the cable with a
friction tape. A short circuit or disconnected wire may cause a fire.
• While installing the RVS System be careful with the wire positioning in
order to avoid wire damage.
• The RVS System should only be used when the vehicle is in reverse.
• Do not watch movies or operate the monitor while driving; as it may cause
an accident.
• Do not install the monitor where it may obstruct drivers view or obstruct an
air bag device.
• Dropping the unit may cause possible mechanical failure.
• When in reverse, monitor buttons are not functional
6©Rear View Safety
IN NO EVENT SHALL SELLER OR MANUFACTURER BE
LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM
ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
If you have questions about this product,
please contact us at:
800.764.1028 sales@rearviewsafety.com
www.rearviewsafety.com
New York
1797 Atlantic Ave
Brooklyn, NY 11233
Indiana
319 Roske Dr.
Elkhart, Indiana 46516
Canada
68 Trafalgar Square
Thornhill, ON, L4J 7M5, Canada
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 7
PRECAUTIONS
Operating Precautions
1. Do not expose the monitor to excessive heat or coldness. Storage
temperature is -30~+80°C; Operating temperature is -20~+70°C; with a
maximum relative humidity of 90%.
2. Never use this device near a bathtub, wash basin, kitchen, damp basement,
swimming pool or similar places.
3. Never use this device in the environment with excessive moisture, dust or
smoke.
4. Avoid dropping or striking.
5. Never use this device in enclosed spaces, areas with excessive vibration or
subject to severe impacts.
6. Never puncture, scratch, or use abrasive cleaning materials on this device.
7. Do not place cables where they may be pinched or stepped on.
8. Leave at least a 2" space between the monitor and walls, glass or other
objects to allow adequate air circulation around the device.
9. This monitor is not designed to be waterproof.
1. The device may be powered by a 12 or 24 volt automotive battery or vehicle
electrical system.
2. Make sure all cables are correctly connected. Observe polarity. Improper
cable connections may damage the monitor. Remove the power cable
connections when you do not intend to use the device.
1. High voltage is present within the monitor. Opening monitor
case should only be performed by professionals.
2. Do not watch any video while driving unless you are
monitoring rear view camera display.
Occasionally, a few highlights or dark spots may occur on
the LCD screen. That is a very common phenomenon in ac-
tive matrix display technology, and it doesn’t necessarily
indicate any defects or faults.
8©Rear View Safety
1. Remove all the cable connections from the monitor before cleaning the device.
2. Use a mild household detergent and clean the unit with a slightly damp, soft cloth.
3. Never use strong solvents such as thinner or benzine, as they might damage the
finish of the device.
This symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sucient magnitude to constitute risk of electric
shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
This symbol is intended to alert the user not to dispose
of electrical and electronic equipment.
CAUTION
Any changes or modifications not expressly approved in this manual could void
your warranty and may necessitate expensive repairs.
1. MAINTENANCE
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 9
2. PRODUCT FEATURES
3. TECHNICAL SPECIFICATIONS
(1) TFT LCD monitor with wide angle view and high-resolution display
(2) Image can be set to horizontally flipped, vertically flipped and normal
(3) Support backlight adjustment manually and automatically
(4) 1.5W speaker
(5) Monitor operated by remote control or physical buttons on display
(6) Working voltage: 10-32V
(7) Compliance with CE/FCC standards
(8) Pairing through PLC communication
LCD Size 7"
Resolution 1024 x 3(RGB) x 600
Contrast 600:1
Brightness 600cd/m2
View Angle U: 85 / D: 85, R / L: 85
Aspect Ratio 0.2175(W) x 0.2088(H)
Channels 1 Channel
Operating Frequency 2400 -2483.5 MHz
Receiving Sensitivity -78 dBm
Decompression Form H.264
Modulation FHSS
Time Delay Max. 200 ms
Transmitting Distance Max. 300 m
Micro SD Card Max.128 GB
Power Supply DC 10-32V
Power Consumption Max.10W
Loudspeaker 1.5W / 8Ω
Operating Temperatur -20 ~ +70°C RH90%
Storing Temperature -30 ~ +80°C RH90%
10 ©Rear View Safety
4. ACCESSORIES
SPECIAL NOTICE: Accessory supply may be dierent for dierent application.
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 11
5. PARTS IDENTIFICATION
Digital Color
LCD Screen
Power Indicator
Remote Control
Sensor
Light Sensor
Power Switch
Loudspeaker
Select Channels
Menu
Volume Up
Volume Down
Micro SD Card Slot
Mounting Bracket
Press OK button to enter
menu item.
Press OK button shortcut
for start/stop recording.
12 ©Rear View Safety
• MUTE (Mute) - Press to select MUTE or enable sound.
• POWER (Power switch) - Press to turn on / o the monitor.
• OK - Press OK button to enter menu item or save user settings.
Press OK button - shortcut for start / stop recording.
• MENU - Press to show menu or exit menu.
• VOL(-) - Volume decrease and menu selection left.
• VOL (+) - Volume increase and menu selection right.
• MIR - MIR-Flip selection.
6. REMOTE CONTROL OPERATION
Press to select MUTE
or enable sound
Press to turn on/o
the monitor
Press OK button to enter
menu item. Press OK
button - shortcut
for start/stop recording
Press to show menu
or exit menu
Volume decrease and
menu selection left
Volume increase and
menu selection right
MIR-Flip selection
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 13
7. BASIC OPERATION
7.1. Installation of Center Mounting Bracket
1. Adjust monitor level by sliding the support to the desired height.
2. Adjust the angle of the monitor and tighten the knob on the center
mounting bracket.
7.2. Installation of U-support Bracket
Support Attaching Piece
Knob
+
14 ©Rear View Safety
1. Red wire to positive power supply of DC/10-32V.
2. Black wire to Ground.
3. Connect the transmitter and display monitor to the same DC
power circuit to achieve reliable pairing.
8. CONNECTION DIAGRAM
12V
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 15
9. MENU OPERATION AND FUNCTIONAL SPECIFICATION
9.1 Preview Interface
Under the main page, press the menu button on the monitor or infrared remote control or click
(touch operation is disabled by default) in the red frame area to call out the main menu
1. If the Pair Request sent by the
Transmitter has not been received for
2s in a row, the following picture will
be displayed.
2. If the monitor receives the Pair
Request sent by the Transmitter, the
following picture will be displayed, and
the pairing will start at this time
3. After the pairing is successful, the
paired prompt will be displayed for a
short time and the prompt will clear
automatically and start to display the
camera image
16 ©Rear View Safety
4. If 2.4GHz signal is lost, the monitor will display
NO SIGNAL and quickly re-enter the pairing state.
Click the corresponding icon (or select the corresponding icon and press the OK button on
the display or infrared remote control) to enter the selected function interface. Click the part
outside the red box (or press the MENU button on the display or infrared remote control) to Exit
the menu selection interface, long press the POWER button on the display to turn on/o the
touch screen operation
9.2 Main Menu
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 17
Brightness: Drag the corresponding slider bar to adjust the brightness.
Contrast: Drag the corresponding slider bar to adjust the contrast.
Saturation: Drag the corresponding slider bar to adjust the saturation.
Hue: Drag the corresponding slider bar to adjust the hue.
Volume: Drag the corresponding slider bar to adjust the volume.
H Mirror: If this is set to ON, the corresponding recording channel is flipped horizontally. If OFF,
the corresponding channel is displayed normally without flipping.
V Mirror: If this is set to ON, the corresponding recording channel is flipped vertically. If OFF,
the corresponding channel is displayed normally without flipping.
Display Only in Reverse: If it is set to on, the monitor display will turn o unless the reverse
trigger wire becomes active. At that point the monitor display will turn on until the reverse
trigger becomes inactive.
1. Camera
18 ©Rear View Safety
Record Time: choose the duration of the video
Format SD Card: “SD Card Format?” will pop up, press Yes to format the SD card.
Power On Record: If it is set to on, the monitor will start recording video upon startup. This
function is set on by default.
Show NO CARD Message: If it is set to on, the monitor display ‘NO CARD’ when first powering
up and no SD card is detected
2. Record
Rear View Safety, 1797 Atlantic Ave., Brooklyn NY 11233
www.rearviewsafety.com 19
3. Playback
Video: The folder will increase with video files automatically. A new folder will be created once
the files exceed a maximum of 997 in a folder. The larger the folder number, the newer folder. If
the SD card is full, files will be deleted from the oldest folder
Camera: Indicates the camera that performed the recording.
Name: File name.
Created: Creation date
Group Num: The corresponding value will increase by 1 with each recording.
20 ©Rear View Safety
Touch or press left/right plus OK key of the remote control to enter the value setting interface,
and set the date and time through the small keyboard.
Date: Select the corresponding year, month and day
Time: Select the corresponding hour, minute, and second
• The monitor antenna should oriented in the same direction as the transmitter antenna.
• Ensure that the RVS letters of the wireless transmitter device are pointing towards the
vehicle.
4. Date and Time
10. INSTALLATION TIPS
Table of contents
Other RVS Monitor manuals
