Ryobi P910 User manual

TOOLBOX FRAME
PULL
STRAP
TOOLBOX
FRAME
The Ryobi large rolling toolbox is a great way to keep your
hand tools organized, accessible, neatly stored, and ready
to transport. Its large storage capacity accommodates a
wide variety of tools and accessories.
Adjustable dividers inside the toolbox allow you to customize
the storage compartments to fit your specific requirements.
Dividers can be raised and fastened into place whenever
needed, then unfastened and lowered when a larger storage
area is desired.
A cover is provided in the Velcro® pocket located on the
side of the toolbox. It can be stretched over the top to help
protect your tools from dust, debris, and moisture.
Before using the toolbox for the first time, some minor as-
sembly is required.
ASSEMBLING THE TOOLBOX:
See Figures 1 - 7.
n Raise the toolbox frame’s end panels until they are stand-
ing straight up.
LARGE TOOLBOX
P910
n Lower the fabric body over the toolbox frame. Make
sure the pull strap is positioned on the side opposite the
wheels.
Fig. 1
n Insert the toolbox handle through the vertical opening
located on the end panel of the toolbox frame.
Fig. 2
Fig. 3
END PANEL
END PANEL
FABRIC
BODY
HANDLE

Fig. 7
SLEEVES
983000-568
7-04
n Secure the handle to the toolbox frame using the end
caps provided. While holding the handle firmly, seat end
cap on handle end and apply pressure until it snaps into
place. Repeat with other end cap.
n Slide the ends of the pull strap through the holes on the
toolbox frame.
Fig. 5
n Secure pull strap by fastening end to snaps located on
inside of toolbox.
n Thread handle through the sleeves in the center divider
section and seat in the vertical opening on the opposite
side of the frame.
Fig. 4 Fig. 6
END CAP
PULL
STRAP
END
SNAP
PULL
STRAP END
RYOBI TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
Post Office Box 1207, Anderson, SC 29622-1207
Phone [phone] • www.ryobitools.com
WARNING:
To prevent possible serious injury, do not sit or stand on
the toolbox.
WARNING
To avoid possible back or lifting injury, use proper lift-
ing techniques and do not attempt to lift an excessive
amount.
WARNING
If carrying a loose battery pack in toolbox, keep it away
from paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one ter-
minal to another. Shorting the battery terminals together
may cause sparks, burns, or a fire.
Always mention the model number when communicating with us regarding this product.