S-Cam Sorell SF3000 User manual

KAD68-06319B (REV 0.1)
DIGITAL AUDIO PLAYER
SF3000
User Manual
The product should be fully charged before use. ■
The above picture ay not be
a true likeness of the product.

COPYRIGHT NOTICE
The copyright of this anual is owned by S.CAM Co., Ltd and unauthorized duplication or
distribution of all or any part of the anual is prohibited.
SORELL is the trade ark of S.CAM Co., Ltd.
WMA is a registered trade ark of Microsoft Corporation.
※Details ay change without prior notice.
What is SF3000?
1. SF3000 is a portable digital audio player that can save and play Microsoft WMA and OGG files as
well as MP3 files.
2. SF3000 allows you to play video in MP4 for at and display JPG i ages on its color LCD.
3. SF3000 has a built-in MP3 encoder that allows you to take an audio input (via the line-in jack)
fro a voice recorder, CDP or other audio device, and save it as an MP3 file.
4. SF3000 also has a built-in FM radio allowing you to listen to FM broadcasts and save the as
MP3 files.
WOW, SRS and sy bol are trade arks of SRS Labs, Inc.
WOW technology is incorporated under license fro SRS Labs, Inc.

3
Table of Contents
2
Product Features
■ PRODUCT FEATURES AND GETT NG STARTED
Cautions............................................................4
Package Contents and Na e of Parts..............6
LCD Display/Battery Charge.............................7
Connecting to PC..............................................8
■ BAS C OPERAT ON
Power on/Playing usic..................................14
Volu e Control/Seg ent Repeat ...................15
Book ark........................................................16
EQ Selection/Navigation .................................17
Deleting a File .................................................17
Listening to FM Radio .....................................18
Recording FM Radio .......................................19
Recording voice ..............................................20
Recording external input .................................21
Using a progra list ........................................22
Playing video/Displaying i ages.....................23
Using Text Viewer...........................................24
Using the M3U Playlist....................................25
To use User’s Logo ........................................26
■ MENU CONF GURAT ON AND TS USE
MENU Configuration .......................................28
MODE Functions.............................................29
SYSTEM .........................................................30
CONTROL.......................................................31
DISPLAY.........................................................35
SOUND ...........................................................37
Accessing the latest features through fir ware
upgrades .........................................................38
■ Using LDB (Lyrics Database).................39
■ Using Transcoder......................................49
■ Specifications.............................................58
■ Warranty.......................................................59
Product Features
●MP3, WMA, OGG music files playback
Save and play Microsoft WMA and OGG files as
well as MP3 files.
● FM Reception and Recording
Make an MP3 digital recording of an FM
broadcast, while listening to it.
● Voice Recording in the quality MP3 format
Save and play voice signals as an MP3 file with
the world’s best sound quality.
●
Recording external audio input signals as an MP3 file
Convert and save audio signals fro any analog
audio device directly to an MP3 file without the
need for a PC.
● Lyrics display supported
Provides an auto atic lyrics input progra ,
obviating the need for separate lyrics editing, and
displays 3-row lyrics on the LCD.
● Enhanced firmware upgrade
After downloading an upgrade file, turn the power
off and back on to auto atically upgrade your
product, keeping it up to date.
● Setting Variable Bit Rate (VBR)
Adjust the recording quality for ore efficient use
of e ory by configuring the voice or line-in
recording bit rate according to your particular ti e
require ents and location conditions.
● Speed Control
Adjust the playback speed.
● Playing video/Displaying an image
Enjoy video and i age files on the 96X96 65K
CSTN high-quality color LCD.
● A built-in rechargeable lithium polymer battery
No need to purchase a separate battery as your
battery can be easily recharged with your PC’s
USB socket.

5
Cautions
4
The following cautions are provided to ensure user safety and to prevent damage to
property. Please be sure to read it through thoroughly before using the product.
When a problem occurs while using the product, please use the following checklist:
Things to check before contacting customer services
Safety Cautions
1. Exposure to loud volu es for an extended period of ti e ay result in hearing i pair ent.
2. Do NOT repair, disasse ble or odify the product by yourself.
3. Do NOT use the product in an airplane, or in other places where the use of electronic devices is restricted.
4. It is very dangerous to use headsets or earphones while operating bicycles, otorcycles or auto obiles.
(Using headsets/earphones at loud volu es while walking ay also cause accidents.)
5. When wearing the player with the neck strap, take care to avoid the strap beco ing caught in a door.
※Opti al Operating Conditions •A bient Te perature: 5°C~35°C
•Hu idity: 10~75%
Do NOT place the product in
places of extre e te peratures
(too high (above 35°C) or too
low (below -5°C)), closed cars,
dusty places, bathroo s or
other hu id places.
When cleaning the product, use a
s ooth dry cloth and avoid solvent,
benzene or thinner usage.
(These che icals ay cause da age or
discoloration to the product.)
Do NOT allow foreign aterial to get
inside the product. If water or other fluid
enters the product, stop usage
i ediately, press the RESET switch
and contact our custo er service
center.
Do NOT exert excessive force on the
LCD display. Do NOT disasse ble,
repair or odify the product by yourself.
Please note that we cannot take any
responsibility for data loss caused by
product failure, atte pted repair, or
other causes.
Please note that plastic cards with
agnetic strips, e.g. ATM cards, ay
be da aged and rendered unusable by
the product’s agnetic field.
1. The product fails to
operate with nothing
displayed on the LCD.
- Recharge the built-in battery. 3. Button keys do
not work.
- Check whether they have
been locked (Hold ode).
4. Cannot download
a file.
- Make sure that the product is
properly connected to your PC.
- When using the USB extension
cable, ake sure that it has
been properly connected.
5. Stops operating. - Press the RESET button next
to the HOLD button on the
ain body. (This forces the
product to shut down.)
2. No sound during
playback.
- Ensure that a track has been
saved to the re ovable disk.
- Check whether the volu e
level is set to “0”.
- Ensure that the earphones
are properly plugged in.

76
Package Contents and Name of Parts LCD Display/Battery Charge
Necklace type earphone
Carrying Case (Option) Arm Band (Option) USB Adapter(Option)USB Cable
Main Body
nstallation CD Line-in Cable User Manual
LCD
LED (Charge /
Operation ndication)
Microphone Direction / MENU Button
Power, Play /
Stop Button
EQ / Navigation /
Bookmark Button
Segment Repeat /
Record Button
USB Jack
Earphone Jack/
Line-in Jack
HOLD Switch
RESET Button
 Operation Mode
 Current track nu ber
 Total nu ber of saved
tracks
 Play control
 Folder for at indicator
 File for at indicator
 EQ ode
 Play ode / Seg ent
Repeat indicator
 Playing ti e
 Hold (Lock indicator)
 Battery life
 Bit rate
 Playback progress
 Folder na e
 File na e and ID3Tag Info
 Level Meter
Charging battery
Charging via PC Charging via adapter
• After turning your PC on, connect the
product to the USB port of your PC
using the USB cable.
•
The charge LED (blue) of the ain body
lights up during charging and goes off
once charging is co plete (this takes
approxi ately 2-3 hours).
• The charging ti e ay vary depending on
the USB usage of your PC.
※Be sure to power off the product
before connecting it.
• Connect the adapter to the ain
body.
• It takes 2-3 hours to co pletely
charge a discharged battery.
• The (blue) charge LED of the ain
body lights up during charging and
goes off once charging is co plete.
※The adapter is sold separately.

9
Connecting to PC
8
USB device driver installation is only required for Window 98 SE/ME environ ents.
Insert the installation CD into the CD-ROM drive of your PC and select “USB Device Driver”.
The installation progra runs auto atically. Follow the instructions in the installation window.
Restart your PC.
Installing the USB device driver
Power on the ain body.
Connect it to the USB port of your PC.
A new Re ovable Disk is created in My
Co puter.
After selecting a file to save, drag & drop or
copy & paste it to the Re ovable Disk.
Connecting to PC
• PC: A PC with Pentium MMX or above
• OS: Win98SE / ME / XP / 2000 / Mac or Linux
• Peripheral Devices: A CD-ROM drive, a hard disk with more than 50 MB available space, a USB port
Do NOT remove the USB jack while
transferring a file.
The order in which music files appear in
Windows Explorer does not reflect the play
order.
Recommended system requirements

11
Connecting to PC
10
Power on the product and connect the USB jack to your PC.
Select [Control Panel ➝Syste ➝Device Manager] and
the following window appears. After selecting [USB Device],
press the Property button.
Press the Update Driver button.
The Device Driver Update Wizard is displayed.
Press the Next button.
After creating a driver list, select a driver to update and
press the Next button.
Select a hard disk controller and press the Next button.
Press the “I have a disk” button.
After inserting the provided CD into the CD ROM drive,
choose “Search” and select the Driver ➝Win98 folder
and press the OK button.
Installing the Windows 98 driver manually

13
Connecting to PC
12
Press the Next button.
Installation of the USB driver is now co plete.
Press the Finish button.
Check whether it has been properly installed.
1) Go to Control Panel ➝Syste for checking.
f after the above procedure has been completed the
product is still not recognized, uninstall the USB driver
completely and install it again.
Managing files
• The product is recognized as a re ovable disk when it is
connected to your PC and it contains two folders na ed
CONFIG and RECORD.
• MP3, WMA, OGG usic files can be saved to either of the
folders.
• Voice recording files should be saved to the RECORD
folder.
• FM recording and encoding files should be saved to the
RECORD folder.
• The ain body can hold up to 999 files in 999 folders.
Disconnecting from PC
• Data loss ay occur if you disconnect the device fro
your PC during data transfer.
• In Windows ME/XP/2000 environ ents, only re ove the
device after first disabling it by clicking the “Safely re ove
hardware” icon ( ) displayed in the lower right corner of
the task bar.
File transfer in progress.
Do NOT re ove the device.
File transfer co plete.
You can now re ove the device.
ROOT

15
Power on/Playing music
14
Volume Control/Segment Repeat
●Power on
Press the PLAY/STOP [] button briefly.
The product turns on and the SORELL screen or another user specified screen appears on
the LCD.
●Power off
Press and hold the PLAY/STOP [] button for ore than 2 seconds.
“Bye Bye” is displayed on the LCD and the product turns off.
●HOLD Switch
Push the HOLD switch in the indicated direction to disable all buttons.
●To play a track:
Press the PLAY/STOP [] button to play an MP3, WMA or OGG file.
●To select a track:
Push the jog key in the  or  direction to skip to the previous/next track.
Push the jog key in the  direction within 3 seconds of starting playback to skip to the
previous track, and after 3 seconds of playback to ove to the beginning of the current track.
Push and hold the jog key to the  or  to seek within the current track.
●To stop playing:
To stop playing, press the PLAY/STOP [] button.
To resu e playing, press the PLAY/STOP [] button again.
●Volume Control
The volu e level can be set between 0-38.
To increase the volu e: Push the jog key in the + direction.
Push and hold it to increase the volu e further.
To decrease the volu e: Push the jog key in the - direction.
Push and hold it to decrease the volu e further.
The volu e level setting is auto atically saved when the product is turned off, and used
when the product is turned on again.
※Please exercise caution. Exposure to loud volu es for an extended ti e ay result in
hearing i pair ent and earphone da age.
●Segment Repeat
Press the REC/A-B button where you want to start Seg ent Repeat during playback.
The icon is displayed.
Press the REC/A-B button again, this ti e at the point where you want to end Seg ent
Repeat.
The icon is displayed and the selected seg ent is played repeatedly.
To disable Seg ent Repeat, press the REC/A-B button once ore.
The icon disappears and Seg ent Repeat is disabled.

17
Bookmark
16
EQ Selection/Navigation/Deleting a File
●Bookmark
nserting a bookmark
While playing a usic file, press and hold the jog key to insert a book ark.
(Up to 99 book arks can be inserted.)
Searching for a bookmark
When stopped, press the EQ button briefly to display the book ark list.
After oving to the desired book ark by using the +/- key of the jog button, press the
FF [] button and playing begins fro the book ark. The sy bol is displayed as
the play ode indicator.
(The sa e button operations apply as when navigating.)
Deleting a bookmark
When stopped, press the EQ button briefly to display the book ark list.
After oving to the desired book ark by using the +/- key of the jog button in the front
panel, press the EQ button to delete it. Press and hold the EQ button to delete all saved
book arks at once.
Any changes to a file on the removable disk to which a bookmark has
been added (deletion/moving) will cause a “NO SONG” message to appear
upon bookmark playback i.e. the bookmark feature can only be used if the
file location has not been changed since its download.
●EQ (Sound Effect) Mode
You can enjoy usic in various tones.
The sound tone changes each ti e you press the EQ button briefly:
NORMAL, ROCK, JAZZ, CLASSIC, POP, USER EQ (user-defined), SRS 3D
●Navigation
Press and hold the EQ button to enter Navigation ode.
After locating the desired file with the jog key, push the key in the  direction to play
the selected file right away.
Moving to the sub folder
Select the desired folder and push the jog key in the  direction.
Moving to the upper folder
Whilst in a folder, push the jog key in the  direction.
●Deleting a File
Press the REC button in Navigation ode.

19
Listening to FM Radio
18
Recording FM Radio
●Listening to FM radio (87.5-108.0MHz, 76.0-108.0MHz)
After displaying the ain enu screen by pressing the jog key briefly, select MODE and
use the jog key to select FM ode.
※Please be sure to plug in the earphones before using FM ode. The earphones work as
an antenna.
The Station Search mode has two modes: Manual and Preset.
Press and hold the jog key to enable or disable the Preset ode.
AUTOSCAN
Press and hold the EQ button. The device then auto atically scans frequencies and stores
up to 20 present channels.
PRESET SCAN Mode
Push the jog key further in the  or  direction to increase/decrease the preset
nu ber and locate a desired station. (Ex. 93.1➝95.9➝97.3)
Push the jog key briefly in the  or  direction to increase/decrease the channel and
locate a desired station.
AUTOSEARCH SCAN Mode
Push the jog key in the  or  direction to increase/decrease the frequency and locate
a desired station. (Ex. 89.1➝91.9MHz)
Storing a station channel
Briefly press the EQ button in the center of the side of the ain body to create a new
channel nu ber and save the current frequency.
Erasing a station channel
Select a channel and press the EQ button briefly to erase the channel nu ber along with
the stored frequency.
●FM Recording
While listening to FM, press the REC button to start recording.
To pause recording:
Press the PLAY/STOP [] button to pause recording and press it again to resu e
recording.
※When paused, ( ) is displayed.
To finish recording:
Press the REC button briefly to stop recording. The recording file is auto atically saved in
the RECORD folder.
The recording ti e is displayed. When the ax. recording ti e - deter ined by e ory
capacity - is reached, recording is auto atically stopped and the recording saved.
※The Max Recording Ti e (based on 256 MB)
128 kbps (4 hr), 64 kbps (9 hr), 32 kbps (18 hr), 16 kbps (36 hr)

21
Recording voice
20
Recording external input
●Voice Recording
After selecting MODE by pressing the jog key briefly, select Voice ode.
(Alternatively, you can press and hold the [REC] button.)
In the Recording ode, press the REC button briefly to start recording.
To pause voice recording:
Press the PLAY/STOP [] button to pause recording and press it again to resu e
recording.
※When paused, ( ) is displayed.
To finish voice recording:
Press the REC button briefly to stop recording. The recording file is auto atically
saved in the RECORD folder.
It displays the recording ti e. When the recording ti e exceeds the ax recording
ti e - deter ined by the e ory capacity - the device stops recording auto atically
and saves the recording.
※You can also press the PLAY/STOP [] button to stop voice recording.
Recording ●Entering the Line-in Recording mode
Connect an external device to the line-in jack of the ain body with the line-in
cable.
To enter the line-in Recording mode:
Press the jog key to display the ain enu.
Select ENCODING ode in the MODE enu and press the jog key.
To make a line-in recording:
Press the PLAY/STOP [] button briefly to pause recording and press it again
to resu e recording.
※When paused, ( ) is displayed.
To finish line-in recording:
Press the REC button briefly to stop recording.
The recorded file is auto atically saved in the RECORD folder.
The recording ti e is displayed. When the ax. recording ti e - deter ined by
e ory capacity - is reached, recording is auto atically stopped and the
recording saved.
※Set the output volu e of the external device to a high level before co encing
line-in recording.
If the output volu e of an external device is low, the volu e level of the
recording ay end up being too low to be audible.
Use the Auto Sync feature to split recording over separate tracks.
External Audio Input
You cannot make a recording when the displayed remaining time is
[00:00:00].
(Out of memory space. Delete a file and try voice recording again.)

23
Using a program list
22
Playing video/Displaying images
●Using a program list
To create a program list:
Select a track in navigation ode to add it to a progra list by pressing the EQ button
briefly. (Up to 99 files can be added.)
To view a program list:
Go to CONTROL ➝PROGRAM to display the selected files.
To play a program list:
After oving to the desired track in the PROGRAM list by pushing the jog key in the + or -
direction, press the  direction key. While in progra play ode, is displayed.
To delete a program list:
After oving to the desired file in the PROGRAM list by pushing the jog key in the + or -
direction, press the EQ button briefly to delete the selected track fro the list.
Press and hold the EQ button to delete all the saved lists at once.
To exit from the program play mode:
To activate general play ode while in progra play ode, enter navigation ode and
play another track.
●Playing video
Press and hold the EQ button and select an MP4 file by pushing the jog key in the + or -
direction. After selecting an MP4 file, push the jog key in the  direction.
• To select a track:
Push the jog key in the  or  direction to skip to the previous/next track.
• To stop:
Press the PLAY/STOP [] button to stop.
Press the PLAY/STOP [] button again to resu e playing.
●Displaying an image
Press and hold the EQ button and push the jog key in the + or - direction to select a JPG file.
After selecting a JPG file, push the jog key in the  direction to view the i age file as a slide.
• To finish viewing an image file:
Press the jog key briefly and select an MP3 file.
Only MP4 files that have been converted using the Transcoder program
(on the provided CD) can be played.
if the file capacity is over the one hour, our set can not support to this
kind of files.
our set can not support to progressive and compressed JPG mode file.
The Playing Status will be disappeared when user clicks the Jog button shortly
during MP4 playing, and it will be displayed again when click one more time.

25
Using the M3U PlaylistUsing Text Viewer
24
●Using Text Viewer:
Press and hold the EQ button, and select a TXT file by oving the jog key in the + or -
direction. After selecting a TXT file, push the jog key in the  or  direction to ove to
the previous/next page within the current file.
• Turn the pages automatically [Set Up / Cancel]
If you set a value for JPG SLIDE, the page advances auto atically when the specified
ti e duration elapses (see Page 34).
When the page has advanced, pressing the PLAY/STOP [] button pauses and/or
cancels Auto atic Page Advance ent.
• To Use the bookmark in Text Viewer
Push the Jog Button to the direction of “+” to e orize the present page, push the Jog
Button to the direction of “-” to go to e orized page (Only one page is available for
book ark).
It will ove to sa e page, which is e orized when user tries to read other text file. It
will go to last page if the page nu ber of other files is below the page of book arked.
• To Close the Text Viewer:
Press the jog key briefly, and select an MP3 file.
● Using the M3U Playlist:
Press and hold the EQ button, and select an M3U file by oving the jog key in the + or -
direction.
After selecting an M3U file, push the jog key in the + or - direction. The playlist is played
beginning with track #1, and the PLAY MODE icon is changed to M3U ( ).
• To Select a Track:
Enter NAVIGATION MODE in the M3U MODE to display the list of usic files contained
in a chosen M3U file. Select the desired track and press  to start playing fro the
selected point.
• To Disable M3U MODE:
Enter NAVIGATION MODE in the M3U MODE to display the list of usic files contained
in a chosen M3U file. Press  to ove to the directory where the M3U files are located,
and cancel M3U MODE.
Push the jog key to change fro PLAY MODE in the enu, or push the REC key when
paused to change to PLAY MODE.
• To Create an M3U File:
After running the Wina p progra , select a track to save, and press “Save as a Playlist”
in Manage Playlist.
To Play an M3U File: The tracks contained in the M3U file should
exist in MP3 player.
t goes FM Radio mode directly when user click the EQ button
during text viewer, it goes Music mode when user click EQ again.

27
To use User’s Logo
26
󳢽 “ NTERVAL” time Setting
Copy and Paste the picture file in ROOT Directory after
connecting PC.
Create the TXT file under na e of “LOGINFO.TXT” on the
WINDOWS WORD PAD, and write [INTERVAL:200] in the TXT
file and save it into the root directory.
User can adjust the ti e of “INTERVAL” value.
Exa ple) The INTERVAL(The Gap of Files) ti e range : Can
be adjusted between 100 s ~ 5000 s.
[INTERVAL:100]:
After 0.1 sec. Move to the next i age
[INTERVAL:300]: After 0.3 sec. Move to the next i age
※If have no “LONGINFO.TXT” file, adjust 200 s (0.2 sec)
auto atically.
Re ove the USB cable out, and power off & power
on again. The SF3000.LOG file is co ing in the root
directory by auto atically, and saved “BMP” file &
“TXT” file will be eli inated auto atically too. User
can re-use SF3000.LOG file through oving it to PC
and re-download.
To make User’s Logo
• Connect the player with PC and Push to PLAY/STOP [] button for Power On. The [Re ovable Disk] will be shown in
[My Co puter].
󳢽 Save the Logo File
Rena e the picture as “LOGO00.BMP ~ LOGO19.BMP” (The
other na e and for at can not be available, and it should be use
LOGO00.BMP for at)
TIP: BMP File : • Maxi u 20files
• Below 1Mbyte per each file capacity
• Zip BMP file does not supported
• BMP file size should be below 96 x 96 Pixel.
• Otherwise, it will show only left top side instead
of full size.

29
MENU Configuration
28
Using MENU
MENU
☞ Press the jog key briefly.
SOUND
SELECT EQ
SETT NG
D SPALY
CONTRAST
SCR SPEED
BACK L GHT
BL NK LED
D3 D SP
LYR C D SP
JPG SL DE
SCR SAVER
MODE
MUS C
FM
VO CE
ENCOD NG
SYSTEM
FORMAT
DEFAULT
SYS NFO
MEM NFO
POWER OFF
CONTROL
LANGUAGE
PLAY MODE
PROGRAM
RECORD NG
SLEEP T ME
STUDY KEY
PLAY SPEED
VOL L M T
Radio CTRL
MODE
●MUS C: Play various file for ats - including MP3, WMA,
OGG, JPG and MP4.
●FM: Listen to or record FM radio.
●VO CE: Record voice.
●ENCOD NG: Record audio signals fro an external
device to an MP3 file.
➤
➤
➤
➤
Select
M
o
v
e

31
Using MENU
30
SYSTEM
●FORMAT: Used to for at the e ory.
Use with caution as for atting results in the loss
of all files.
●DEFAULT: Restore all the settings of the product to the
initial factory settings.
●SYS NFO: Check the fir ware version.
●MEM NFO: Display e ory-related infor ation: total
e ory space, used e ory space and
available e ory space.
·USED: Used e ory space
·REMAIN: Available e ory space
➤
➤
➤
➤
●POWER OFF: The product turns off auto atically when
play is stopped for a certain period of ti e.
The idle ti e can be specified as anywhere
between 1 and 30 inutes.
➤
CONTROL
●LANGUAGE: Select a language to be used for will be
used to displaying ID3 TAG infor ation
and lyrics.
●PLAY MODE: Select a desired play ode.
After selecting CONTROL in the ain enu, select
PLAY MODE and then a desired play ode.
■Play Mode
NORMAL: Play the entire tracks once in a sequential order.
NORMAL DIR: Play the tracks within a directory once.
REPEAT ALL: Play the entire tracks repeatedly.
REPEAT DIR: Play the tracks within a directory repeatedly.
REPEAT One: Play a single track repeatedly.
SHUFFLE RPT:
Play the entire tracks repeatedly in a rando order.
SHUFFLE DIR: Play the tracks within a directory repeatedly in a
rando order.
INTRO Play the entire tracks for the first 10 seconds per each.
PROGRAM: Play the progra ed tracks only.
BOOKMARK: Play the book arked portions only.
※Press the REC/A-B button briefly when stopped and then the
play ode changes sequentially.
➤➤
Select
M
o
v
e
Select
M
o
v
e

33
Using MENU
32
CONTROL
●PROGRAM: Allows you to listen to the selected tracks only.
• To perform track programming:
Press and hold the EQ button to enter
Navigation ode.
After selecting a desired track with the jog
key, press the EQ button briefly to save it.
• To play programmed tracks:
Go to MENU ➝CONTROL ➝PROGRAM by
pressing and holding the jog key and then the
PROGRAM list is displayed.
Select a track to begin play with and push the
jog key in the  direction to play tracks in
the progra ed order.
(See page 22.)
●RECORD NG: Adjust the recording quality of external
input, FM radio and voice recording.
■B TRATE : Specify the recording quality that you want.
A low bit rate decreases file size but yields poorer
sound quality. A high bit rate yields better sound
quality but increases the file size, shortening the
ax. recording ti e.
■AUTO SYNC : This function auto atically detects when there
is no inco ing signal during encoding
(recording) and saves the input in separate
files. (Signals following about 3 seconds of
silence are saved as separate files.).
➤
➤➤
➤➤
CONTROL
■M C VAD : During voice-recording, stops recording when there
is no signal.
●SLEEP T ME: Specify the ti e after which the player
auto atically powers off while playing.
■SET T MER
: Specify the desired ti e (0-60 inutes).
■T MER : Display the re aining ti er ti e.
●STUDY KEY: Set the ti e interval that is skipped when
the jog key is pushed in the  or 
direction.
This function allows you to skip the specified
ti e interval by pushing the jog key in the
 or  direction, which can be useful
when used with a language study file that
has a long recording ti e.
※Set it to 00 to disable the function.
●PLAY SPEED: Specify the desired play speed.
Press “-” to decrease and “+” to increase
the play speed. 100% (00) represents
nor al play speed.
➤➤
➤➤
➤➤
➤
➤
Select
M
o
v
e
Select
M
o
v
e

35
Using MENU
34
CONTROL
●VOL L M T: Li it the post power-on volu e level.
(e.g. if you set the value to 10, then the volu e
level will be set to 10 whenever you power on
the player - even if the volu e level was higher
than 10 when you turned the power off.)
●RAD O CTRL: Select the frequency range for your country.
(76.0 - 108.0 MHz)
(US/Europe, Japan)
➤
➤➤
■SCAN LEVEL : Adjust the FM reception sensitivity for Autoscan.
• +: Decrease sensitivity during Autoscan.
• -: Increase sensitivity during Autoscan.
➤➤
D SPLAY
●CONTRAST: Adjust the contrast of LCD (0-35). ●BL NK LED: Let the LED blink while playing a file.
This allows you to see that the player is
operating, even when the backlight is off.
●D3 D SP: Display the ID3 TAG infor ation instead of the
filena e.
➤
➤
➤
●SCR SPEED: Adjust the filena e scroll speed (0-6).
➤
●BACK L GHT: Adjust the LCD backlight ti e (0-18).
➤
Select
M
o
v
e
Select
M
o
v
e

37
Using MENU
36
D SPLAY
●LYR C D SP: Display the lyrics contained in a usic file on
the LCD.
A filena e is displayed when lyrics are not
available.
●JPG SL DE: Specify the ti e duration for which each JPG
file is displayed.
(Auto atically proceeds to the next file after
the specified ti e period.)
●SCR SAVER: The SF3000.LOG i ages in the root directory
as user selected will be displayed after user
set the SCR SAVER ti e.
This function is to show the i age or
ani ation which is selected for user’s
preference with listening usic.
(Can be adjusted 0~30 sec)
(See page 26)
➤
➤
➤
SOUND
●SELECT EQ: Specify the usic tone appropriate for each
genre: NORMAL, ROCK, JAZZ, CLASSIC,
POP, USER EQ (user-defined), SRS 3D
Select
M
o
v
e
Select
M
o
v
e
■SRS 3D: SRS technology expresses and enhances sound
through 2-channel headsets or speakers better than
stereo is able to. SRS delivers a ‘live’ surround
experience - a 3D sound i age with sound directions
that si ply aren’t possible with stereo.
• WOW: Adjust 3D sound effects.
• TRUBASS: E phasize the bass.
• FOCUS: E phasize the treble or the delicacy of
sound.
●SETT NG: Configure 3D sound effects.
■USER EQ:
Adjust the tone fro low to high frequency
according to user preference.
Select a band, by pushing the jog key in the  or
 direction, and use +/- to set its value.
➤➤
➤
➤➤