SA legend 12 User manual

SA legend sub 12 Manual in English
vers. 1

Welcome
Thank you for choosing SA.
At System Audio, we want to
excite people with amazing
audio experiences.
To get the most out of your new
speakers, I recommend that you
carefully read this guide before
connecting your new SA
speakers.
Feel free to contact us if you
have any questions.
Ole Witthøft, founder
Check for further information on:
www.system-audio.com
Good to know about
your new speaker
Warranty
System Audio A/S provides a 2-
year warranty against production
defects and a 7-year warranty on
drive units and passive
crossovers by registering at
www.system-audio.com
The warranty does not cover
abuse or electronic circuits.
Repairs and service are
performed by the dealer or
affiliated service workshops. Any
changes to the design will void
the warranty.
Burning-in your new speaker
Your speaker need a 50 hour burn-in
period and have to play music for a
few days to get the sound right:
Note:
* The better the equipment in your
system, the better the speaker will
sound.
* Good cables improve sound
* Spend time experimenting with
speaker placement
* Never turn up the volume to a level
where the sound is not clean
* Remove front grilles for best quality
Inside the box
1 x SA legend sub 12
1 x power cable
4 x rubber feet
1 x manual
(1 box)
Check the serial number
The serial number is on a label on
the back of the speaker.
We recommend that you write down
the serial number on your invoice or
insurance policy.
Please contact your dealer if the
serial number is not mentioned on
the loudspeakers.
New technology to fill the
room with sound
A new feature of SA legend silver-
back is the special DXT-lens
around the tweeter.
The patented design makes the
living-room better filled with sound.
The advantages of DXT are
obvious.
Try to walk around the room and
enjoy the music from every corner
Do like thousands of music
lovers
Subscribe to our blog and get all
the news, offers and access to
articles to update your knowledge.
Subscribe on:
www.system-audio.com

LFE input
If your surround amplifier or receiver
has an LFE output it can be used to
connect to the LFE input on the sub-
woofer.
When using this connection, the cros-
sover is bypassed to the subwoofer
amplifier.
Bass management must be underta-
ken by the home theatre source.
RCA input
For connecting a stereo signal. When
using this connection, the frequency
adjustment is active.
Mains switch: on/off
Power indicator
Red: Off
Green: On
Volume
Crossover frequency
Phase switch
On/off/auto selector
ON: The unit is permanently switched
on.
AUTO: The unit automatically turns
on and turns automatically to standby
mode after 15-20 minutes of absence
of sound
OFF: The subwoofer is turned off.
Socket for power cable
Connections

Here are the other members of the SA legend family
SA legend is a family of loudspeakers for movie and music lovers who want the best
sound.
The speakers can be used in music systems and home theaters and SA legend sub
12 may be combined with the legend speaker models in many combinations to
create incredible music and movie experiences.
SA legend sub 12 is a perfect subwoofer for all other SA speakers, both past and
present models.
www.system-audio.com
SA legend 60
SA legend 7 is an on-wall speaker, der overrasker musikelskere med sin store lyd
SA legend 40
SA legend 10
SA legend 7SA legend 5