For more information: http://windows.microsoft.com/en-US/windows7/Add-a-device-or-computer-to-a-network http://windows.microsoft.com/en-US/windows7/Setting-up-a-wireless-network http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-wireless-network Adding a Wireless computers to the WiFi-Repeater with WPS Button 1. Log on to the computer.2. Press the WPS button of the WiFi Repeater directly for 2 - 3 seconds.3. Press the WPS button of the Wireless Adapter directly for 2 - 3 seconds. Click Finish to complete the WPS configuration. (Please check your Wireless adapter Manual with WPS configuration)4. You should see icons for the computer you added and for the other computers and devices that are part of the network.Adding a wired (Ethernet) computer to the WiFi-Repeater1. Plug the Wi-Fi Repeater to a wall socket. Connect your computer / laptop with the Wi-Fi Repeater with enclosed RJ45 Cable. 2. To confirm that you added the computer, do the following:Open Network by clicking the Start button , and then clicking Control Panel. In the search box, type network, and then, under Network and Sharing Center, click View network computers and devices. You should see icons for the computer you added and for the other computers and devices that are part of the network.
How to configure your computer/laptop with the Network IP Address
1. Log on to the computer.2. Click the Start button (it should be located at the lower-left corner of your screen), then click Control Panel. Click View Network Status and Tasks, and then click Manage Network Connections. Right-click Local Area Network, then select Properties. When the Local Area Connection Properties window appears, select Internet Protocol Version 4 (TCP/IPv4) and then click Properties. 3. Setting IP address manually: Type IP address is 192.168.10.x (x is from 2 to 254), and Subnet mask is 255.255.255.0. Type the Routers LAN IP address (the default IP is 192.168.10.1) into the Default gateway field.Wireless-N Wifi RepeaterEnglish-09Wireless-N Wifi RepeaterEnglish-10
