Safavieh Lighting TBL4166A User manual

CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions Dust shades with a featherdusterorwithan
Unplug
lamps
before
using
any
cleaning
solutions
.
Dust
shades
with
a
feather
duster
or
with
an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
Model# TBL4166A
Product Dimensions: 10" X 10" X 18.25"H
NOTICE&
IMPORTANT
SAFETY
INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*
The external flexible cable or cord of this luminaire cannot be replaced;
The
external
flexible
cable
or
cord
of
this
luminaire
cannot
be
replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this
p
lu
g
will fit in a
p
olarized outlet onl
y
one wa
y
. if the
p
lu
g
does not fit full
y
in
pg p y y pg y
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
A Lamp base 1X E Shade 1X
B
Saddle
1X
F
Finial
1X
B
Saddle
1X
F
Finial
1X
C Socket 1X G Bulb 1X
DHarp 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40 WATT OR CFL BULB MAX 13 WATT OR LED BULB MAX 9 WATT
PLEASE
USE
ON/OFF
TYPE"A"
BULB
MAX
40
-
WATT
OR
CFL
BULB
MAX
13
-
WATT
OR
LED
BULB
MAX
9
-
WATT
THERE IS LED 4-WATT BULB IN THE BOX
G
F
E
D
C
B
A
Step 1
Step2
Step3
Step
1
Step2
Step3
Insert the Harp (D) into the Saddle (B). Insert the bulb(G) into the socket(C). Put the light on a level surface to check
Put the shade(E) on the Harp(D), then if everything is stable.
tighten the Finial (F)into the Harp (D)
ENJOY YOUR LAMP