Safavieh Lighting ZEID FLL4059 User manual

CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
Model# FLL4059
Product Dimensions: 12 x 9.875 x
66.5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Socket 1X
BLamp
Body(tube) 3X F Shade 1X
CLamp
Body(bend) 1X G Bulb 1X
Dadjustable
turning 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PPLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Step 1 Step2 Step3
Make sure all parts could be aligned before assemble Insert the bulb(G) into the socket(E). Put the light on a level surface to check
Do not push rotate tubes too hard avoid base screw broken if everything is stable.
Screw the Lamp Body (C) onto the lamp body (B3)
Screw the lamp body (B3) onto the lamp body (B2)
Screw the lamp body (B2) onto the lamp body (B1)
Screw the lamp body (B1) onto the lamp base (A)
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP