Safavieh Lighting NIOBE FLL7004A User manual

Model#:FLL7004A
Product Dimensions:: 13"Lx9.75"W x 65.75"H
Part List and Hardware List
PEICE DESCRIPTION PICTURE QUANTITY PEICE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X D Bulb
3X
B Pipe 3X E Shade
3X
C Pipe 1X F Socket
3X
1/2
WARNING
**WERECOMMENDINSTALLATIONOFTHISLIGHTINGFIXTUREBEDONEBYALICENSEDELECTRICIAN**
* Switchoffthemainelectricalsupplyfromthemainfusebox/circuitbreakerbeforeinstallation.
* Inspectitemcarefullybeforeattemptingtoinstall.
* Ifthereisanydamagesorobviousdefects,donotinstall.
* Itemmaynotbereturnedonceithasbeeninstalled.
CAREANDMAINTENANCE
* Tocleantheoutsideofthefixture,useadryorslightlydampenedcleancloth(usecleanwater,nevera
solvent)towipethesurfaceofthefixture.
* Tocleantheinsideofthefixture,firstdisconnectpowertothefixturebyturningoffthecircuitbreakerorby
removingthefuseatthefusebox.Next,useadryorslightlydampenedcleancloth(usecleanwater,nevera
solvent)towipetheinteriorsurfaceofthefixture.
* Donotuseanycleanerswithchemical,solventsorharshabrasives.Useonlyadrysoftclothtodustorwipe
carefully.
NOTICE&IMPORTANTSAFETYINSTRUCTIONS
* Pleasemakesurethatyouhaveallpartsindicatedbeforeyoubeginassemblyofthisitem
*Thisitemshouldbeassembledonasoftsurfacetopreventscratchingthefinishduringassembly
*Toreducetheriskoffire,electricalshockorinjurytopersonsorproperty,pleasefollowtheguideline
below forsafeuseandinstallation

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and
hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 8 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
NOTE:PLEASE USE TYPE"G45" BULB MAX 40-WATT OR CFL BULB MAX 8-WATT OR LED BULB MAX 4-WATT,THERE IS LED 4-WATT BULB IN THE BOX
Step 1:Install the Tube(B) to the base (A) by
clockwise. Install the Tube(C) to Tube(B).
Step 2:Install the bulb(D) into socket.(F) Step 3: Install the shade(E) into the socket(F) and fix it.
2/2