Safavieh STUDIO User manual

WARNING
*This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the
risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician.
*Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety
feature.
CARE AND MAINTENANCE
Model# TBL4538
Product Dimensions: 14"Lx 14"W x 16.5"H
*Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe
use and installation
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp body 1X D Small gasket 1X
B Big gasket 1X E Finial 1X
C Shade 1X F Bulb 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
PLEASE USE ON/OFF TYPE"B" BULB MAX 40-WATT OR LED BULB MAX 9-WATT,THERE IS LED 4-WATT BULB IN THE BOX
Step 1:Please place base (A)on the table. Insert big gasket (B) into lamp body
(A).Put the shade (C) on the lamp body (A). Insert small gasket (D) into shade (C).
Tighten the Finial (E) into the shade (C)
Step2: Put the light on a level surface to check if everything is stable.
2/2