Safavieh SHEFTON PND4012A User manual

1 / 3
CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel
before beginning installation.
Assembly Instruction
ITEM#:PND4012A
Care and Cleaning
To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean
water, never a solvent)to wipe the surface of the fixture.
water, never a solvent)to wipe the surface of the fixture.
To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit
breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean
cloth(use clean water, never a solvent) to wipe the interior surface of the fixture
Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth
to dust or wipe carefully.
to dust or wipe carefully.
Estimated Assembly Time:30 minutes
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A mounting screw 2X F ground screw 1X
B mounting bracket 1X G canopy 1X
C machine screw 2X H tube 12" - 2X
6" - 2X
D wire connector 3X I ring nut 1X
E screwed ball 2X J bulb 5X
1 / 3

Installation
Step 1
Connect the tubes(H) together to get desired length
and screw the bottom end to the ring nut(I) on top of
2 / 3
and screw the bottom end to the ring nut(I) on top of
main fixture, and the top end into the coupling
beneath the canopy(G).Separate the mounting
bracket from the Canopy(G) by unscrewing the
screwed ball anti-clockwise.
Step 2
Unpack all parts from cartons carefully.
1. Fix the mounting bracket(B) to the outlet
1. Fix the mounting bracket(B) to the outlet
box with machine screw(C).
Attach the Canopy(G) to the Mounting bracket
(B) and fix it by turning the screwed ball (E).
Step 3 Wire connection
Make wire connections, with wire connectors(D), following the reference chart listed below.
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
Clear,Brown,Gold or Black without Tracer(colored stripes) Clear,Brwn,Gold or Black without Tracer(colored stripes)
Insulated Wire(not green)with copper metal conductor Insulated Wire(not green)with Silver metal conductor
Black White
*Parallel Cord(round&smooth) *Parallel Cord(square&ridged)
Connect,Hot,Black or Red outlet Supply Wire to:
Connect,Neutral,White Outlet Supply Wire to:
*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and
ridged and the hot wire will be round in shape and smooth.(See illustration on left)
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
2 / 3

Step 4
Install bulbs(J). Be sure to use light bulbs(J)
with wattage no greater than specified on this
fixture. Always make sure that electrical
3 / 3
PLEASUE USE TYPE"A" BULB MAX 40-WATT
OR EDISON BULB MAX 40-WATT
OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
fixture. Always make sure that electrical
current is turned off before changing bulbs.
OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE ARE 5PC 4W LED BULBS IN THE BOX.
Step 5
Consult a qualified electrician to ensure correct branch
Consult a qualified electrician to ensure correct branch
circuit conductor
ENJOY YOUR LAMP
3 / 3