Safavieh FLL4080 User manual

CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
Model# FLL4080
Product Dimensions: 15" X15"X 63"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A Metal frame 1X J Tube 1X
B Tube foot 1X K Tube 1X
C Wood frame 1X L Rotary
connector 1X
D Tube 1X N Socket 1X
E Fixed frame 1X O Shade 1X
F Tube 1X P Out ring 1X
G Screw 6X Q Bulb 1X
H Big Spanner 1X R Screw 3X
I Tube 1X S Small spannel 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Step 1 Step 2, 3. Step4 Step5
Make sure all parts could be aligned before assemble
Unpack all parts from cartons carefully. Insert the tube(J) into the tube(I). After adjusting the positive
direction,
Put the light on a level
Put the top metal frame reversely. and Insert the tube(K) into the tube(J). Fix the Tube(K) on to the
Tube(J)
surface to check
Fix the Metal foot(B)on to the Metal frame(A)with Then put the lamp body straight, with screws(R) by using small if everything is stable.
screws(G) by using Big Spanner(H) Insert the tube(I) into the metal frame(A) spanner(S). Put the shade(O)
Put the Wood frame(C)on the Metal foot(B),Then Screw on the Socket(N), then fix the shade
the Metal foot(B)to the tube(D) through wood frame(C). by out ring(P).
Screw the tube(D)to the tube(F) through fixed frame(E) Insert the bulb(Q) into the socket(N).
ENJOY YOUR LAMP