Safavieh KNT3032 User manual

Important Safety Instructions:
Please read all instructions carefully before assembling.
For your safety, assembly by two or more adults is strongly recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Pre-assembly:
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts and hardware lists below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
Parts Included:
(A)
Seat
1x
(B)
Backrest
1x
(C)
Plastic Washer
4x
(D)
Front Leg
2x
(E)
Rear Leg
2x

Assembly Instruction Steps:
1. Carefully turn the Seat (A) onto its side lying on a smooth scratch free surface. Screw the front Legs (D) and
rear legs (E) through the plastic washer (C) into Seat (A) as shown. Then carefully turn the seat upright.
NOTE: Front legs (D) is higher than rear legs (E), they are not interchangeable.
2. Attach Backrest (B) to the Seat (A) by sliding Bracket, pressing firmly to lock the retaining piece into place.