Safavieh LIT4349A Maintenance manual

PIECE DESCRIPTION PICTURE
QUANTITY
PIECE DESCRIPTION PICTURE QUANTITY
A.B.C nut.mat.washer 2X D Base 1X
E steel plate 1X Q RING 1X
F Werench key 1X P Shade 1X
HSCREW 1X R Bulb 1X
G.J.L.N Lamp 1X T Finial 3X
Model# LIT4349A
Product Dimensions:
L69-3/4" X W16" X H84"
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician.never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List

1.Carefully remove all lamp parts from the box,lay all parts on a
flat surface. please see list of items included in box below.
2.Insert body(G) to base steel plate(E) and secure by sliding in
washers(B.C) and nut(A) using wrench key(F)-(INCLUDED)
3.Stand the now assembled base onto a flat surface.
4.Insert arc arm(N) into arm(L) and secure with screws(M).
5.Once arc arm(N) and arm(L) are attached, insert arc arm(N.L)
into arc arc arm(J) securing it using screw(K)
6.Insert now assembled arc arm(N.L.J) into
arc body(G) and secure using thumb screw(H).
7.Attach shade(P) to socket threading(O) located at end of arm(N)
securing it with lock ring(Q),insert 23W CFL bulb(R)-(INCLUDED)
8.Attach diffuser(S) to shade(P) securing it with finials(3x)-(T)
ENJOY YOUR LAMP
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.