Safco Rotry Pamphlet Display Rack User manual

4128-37: 1 of 4;
01/03
For questions or concerns, please call the Safco Consumer Hot Line 1-800-664-0042
available Monday-Friday 8:00 AM to 4:30 PM (Central Time) (Englis -speaking operators)
TOOLS REQUIRED: Wrench for Casters (INCLUDED)
PRODUCT WARRANTY REGISTRATION is available online at: www.safcoproducts.com
4128
Rotary Pamphlet Display Rack
ASSEMBLY INSTRUCTIONS
New Hope, MN 55428
Visit us on the web:
www.safcoproducts.com
an LDI Company
A
D
E
E
D
E
E
I
C
B
G
F
G
G
H
G
H
H
H
A
B
C
D
E
F
G
H
I
Lockin Caster 2 4139-26
Base 1 4139-04
Non-Lockin Caster 3 4139-25
Lower Wire Rin 4 4139-03
Washer 4 4139-21
Lon Post 3 4139-06
Upper Wire Rin 4 4139-02
Wire Compartment 16 4128-01
Short Post with Cap 1 4139-07
o
o
o
o
o
o
o
o
o
PART NO.
CODE DESCRIPTION QTY.
PARTS LIST

Safco Products Company, New Hope, MN 554284128-37: 2 of 4; 01/03
1 2
3 4
A
C
B
Insert Locking Casters
(A) into the bottom ends
of Base (B). Insert Non-
Locking Casters (C)into
the three remaining
ho es.
D
E
F
P ace one Lower Wire Ring
(D) onto vertica post of
Base. Position Washer (E)
onto threaded end of post.
Screw a Long Post (F) onto
vertica post of Base, so
Washer is between posts.
NOTE: p ace Lower Ring
BEFORE adding Washer!
HOOK FACES DOWN!
S ide Upper Wire
Ring (G) over post
to rest on Washer.
G
HUB FACES DOWN!
H
Ti t a Wire Compartment (H) into one side of the
Upper Wire Ring. Hook of Wire Compartment
passes OVER the outer wire, and UNDER the inner
wire to hook onto the Upper Wire Ring. Attach
three more Wire Compartments, one per side.
HOOK

Safco Products Company, New Hope, MN 554284128-37: 3 of 4; 01/03
5 6
7Repeat instructions 4 through 6 to assemb e
the second wire compartment assemb y. 8Repeat instructions 4 through 6 to assemb e the third wire compartment assemb y.
Raise the Lower Wire
Ring up so its hooks
can be p aced over
the ower rear wire of
each Wire Compart-
ment.
HOOKS
REAR WIRE
The first wire compart-
ment assemb y is now
comp ete, and can be
rotated free y on the first
Washer.

Safco Products Company, New Hope, MN 554284128-37: 4 of 4; 01/03
9For the fina wire compartment assemb y, s ide
remaining Lower Wire Ring (D) onto post.
Position Washer (E) on post. Screw the Short
Post with Cap (I) onto the post. P ace remaining
Upper Wire Ring (G) over Short Post and
Washer.
10 Repeat steps 4 through 6 to attach the four
remaining Wire Compartments (H).
G
I
E
D