SafeDial GL45-3G User manual





INSTALLATION AND USER MANUAL
 



Poweredby 


Globe Wireless
Level 8 - 499 St Kilda Road Melbourne VIC 3004
www.globetelecom.com.au
Technical Support : 1300 728 650


SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page2


Contents
Introduction 3
Features of the SafeDial Wireless (GL45-3G) 4
GL45-3G Activation Tools 5
Installation and Commissioning Procedure 5
Alarm Panel Programming 6
Defaulting the GL45-3G 6
Inputs and Outputs 6
Connection Guide to Alarm Panel 7
LED Status Indicators GL45-3G 7
Background Polling 8
Contact ID Reporting Codes 8
TransmissionDelayTimes 8
Specifications GL45-3G 9
SafeDial Toolbox 10
Operation Notes 11
HomePage 11
PingPage 12
Account Page 16
Change Log 16
FleetPage 17
ActivatePage 18
Transfer Page 18
UserPage 19
Central Station Page 20
Activating a GL45-3G 21
Pocket Secure 22
Key Switch Wiring for Pocket Secure 23
Creating an End User (Pocket Secure User) 24
CustomerDownload 24
FAQs 25
Warning 29
Liability 29
Notes 29
Table of Content

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page3

.
SafeDial Wireless Units
Globe’s SafeDial network provides two-way communication between
supervised premises
and the Control Room. The Globe GL45-3G is a versatile
state of the art microprocessor based 3G and IP Security device that interfaces
with a range of Alarm Panels.
All alarm events and system alerts are delivered in Contact ID format directly to
your Control Room’s PSTN receivers via your SafeDial 1345 service. There are
no extra monitoring costs and no extra equipment required at your control
room. With 4 hour polling & system integrity monitoring you will always know
your alarm system‘s status
SafeDial Toolbox
Accompanying SafeDial Wireless is a handy application called SafeDial
Toolbox™, a WEB based activation, installation and diagnostic tool for
installers. With remote access via a PC, tablet or smartphone, Installers can
quickly commission, test and interrogate their SafeDialWireless™ device
Pocket Secure
Pocket Secure (iPhone & Android) is able to remotely arm & disarm your
alarm system. Pocket Secure is a smartphone app which connects to the
SafeDial Wireless servers via the internet. Once a connection is established,
the last 100 events are scanned and the state of the alarm is determined and
presented to the user.
SafeDial Config
SafeDial Config is a software application that allows the user to remotely
connect their Alarm Panels upload / download configuration software via
Globe’s SafeDial Wireless network. This solution effectively replaces the
traditional phone line dialler solution and eliminates the need to visit
customers’ premises for Alarm Panel configuration changes.
This handbook details the operation, connection and functionality of the SafeDial Wireless device, and the
SafeDial Toolbox and Pocket Secure applications. There is a separate handbook detailing the operation of
SafeDial Config.
.
Introduction

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page4

Features of the Globe SafeDial Wireless device include:-
 Multipath 3G and IP – Telstra SIM enabled.
 Four (4) hour integrity polling – Providing an Always On health check.
 Simplicity – Simple installation with supplied antennae and software tools.
 Works with any Control Room.
 No additional call charges – Low purchase price with fixed monthly cost.
 No GPRS receiver equipment required at the Control Room.
 No extra monitoring fees as all events are reported to standard PSTN receivers, including equipment
and poll fail messages.
 All alarm events and health checks exceptions are transmitted in Contact ID.
 Continuous online health checks and reporting of larm panel (inclusing watch dog reset timer), and
dialler interface leads.
 SafeDial 1345 enabled providing total portability should you ever change Control Rooms.
 Ability to remotely interrogate (DC power, signal strength etc), testing and commissioning of all
devices via a PC, tablet or smartphone using SafeDial Toolbox.
 Ability to remotely arm & disarm Alarm Panels from your smartphone via the Pocket Secure App.
 Ability to remotely upload/download Alarm Panel configuration from your PC via SafeDial Config.
 Up to 14.4K band Modem for upload/download.
 Three (3) Outputs.
 Three (3) Inputs.
 Various LED status indicators for easy onsite diagnostics.
 Future Proof with seamless fireware upgrades.
 All communications acknowledged and sent using AES128 encryption.
 Approved to: EN301489, EN301908, EN62311 and EN60950-1.
 Australian designed and supported product.
 The IP Module acquires an IP address automatically using customer DHCP services.
 Non-volatile memory stores all setup information in the event of a power failure.
Features of SafeDial Wireless GL45-3G

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page5

.
 You must be a registered user of SafeDial Toolbox. Globe
administration will register you as a user at the time of your first
hardware purchase.
 Before powering up, the unit must be activated via the web
using the SafeDial Toolbox App on your smartphone, PC or
tablet. Go to www.safedialtoolbox.com.au to activate your unit.
NOTE: Refer to the SafeDial Toolbox Quick Start Guide or Page 22 – “Activating a GL45-3G” in this manual.


 Before applying power, the GL45-3G must be activated using SafeDial Toolbox.
This unit will not operate unless it has been correctly activated.
 Find a location within the Alarm Panel box where you would like to install the unit.
 Route the antenna cable outside the box & place the antenna on top of the metal Alarm Panel
enclosure, or use the provided ground plate.
 Connect power to the power terminals. Power is normally obtained from the Alarm Panel.
If you are using an independent power supply make sure that you have a common negative.
 A four wire connection is required between the Alarm Panel dialler and the GL45-3G.
‘Ring” (R) (Red) & ‘Tip’ (T) (Green) as the input and ‘R1’ (Black) & ‘T1’ (Yellow) are the return line.
If the return line is not connected the “CID” LED will be [RED – On] indicating a fault. This lead is also
used to monitor the interconnectivity between the Alarm Panel dialler and the GL45-3G. If the lead is
removed a “Dialler Lead Interface Fail” event will be sent to the Control Room. This indicates that the
panel has lost connectivity with the GL45-3G. (Refer to Page 7 of this manual for Connection Guide)
 If you are using the Ethernet Port, connect a CAT5 cable between the GL45-3G and the local router or
network port.
 The GL45-3G will automatically obtain an IP address if it is set to DHCP (default).
 Connection to the internet is indicated by the “IP” LED [GREEN – Steady On].
 The “HB” LED indicates signal strength and if the microprocessor is operating
(Refer to Page 7 of this manual for the Full LED Status Indicators)
Good Signal = [GREEN – Blinking]
Low Signal = [RED – Blinking].
 The unit can take up to 3 minutes to register onto the cellular network.
 Connection to the cellular network is indicated by the “MOBILE” LED = [GREEN – Steady On].
 If the signal strength is low you need to reposition the unit or make use of a high gain antenna.
The unit needs to be power cycled to refresh the signal strength indictors when repositioned. Signal
strength must be better than -88dBm for reliable communications.
GL45-3G Activation Tools
Installation and Commissioning Procedure

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page6

 The Alarm Panel must be programmed with:-
- Contact ID
- Tone Dialling
- Four digit Panel ID Number
- 8 digit telephone number.
 Ensure Line Monitoring is turned off.
 After the first successful event is sent from the Alarm Panel the “CID” LED will be [Green – Steady On].
 Ping the unit using SafeDial Toolbox to verify status of installation.
 Apply DC power and depress reset button for:-
- 3 seconds to reset 3G settings (all LEDs [GREEN – Flash], confirming successful default)
- 6 seconds to reset IP configuration (all LEDs [RED –Flash], confirming successful default)
NB:Only necessary for defaulting, or if installing IP if unit has been active for longer than 5 minutes.
Three (3) outputs:-
 The output are open collector 12V 50mA switching negative, for heavier loads a relay must be used.
 The outputs can be Opened, Closed or Pulsed remotely using the SafeDial Toolbox App.
 Ensure there is a common negative between the GL45-3G and the device being switched.
 Output 1 is typically used for arming / didarming the Alarm Panel via Pocket Secure.
Three (3) inputs:-
 Inputs are programmed as 24 hour instant zones (detected every second).
 All inputs must be terminated with a 3K3 resistor.
Alarm Panel Programming
Defaulting the GL45-3G
Inputs and Outputs

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page7


LED ACTIVITY INDICATION
HB Green Flash *
Signal Strength OK / Processor OK
Red Flash Signal Strength low or trying to reconnect
MOBILE Green On * Unit is online
Red Blinking Data traffic on 3G/GPRS
Not On No connection on 3G/GPRS network
IP Green On * Unit is connected to IP network
Red Flash Data traffic on IP network
Not On No connection on IP network
CID Green On * Alarm Panel has sent a valid Contact ID event
Red On (permanently) Alarm Panel dialler lead faulty
Red On (3 seconds) followed
by Green Blinking The line has been captured and data is being sent
Not On No valid Contact ID event has occurred
*Normal Operation
LED Status Indicators GL45-3G
Connection Guide to Alarm Panel

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page8

Health Check polls are sent from the server to the GL45-3G at continuous intervals (typically every 20
minutes on 3G/GPRS and every minute on IP). The poll time in the server is reset after every received poll.
If no poll is received for a consecutive 4 hours on either the IP path or 3G/GPRS path, a “Poll Fail” or “Off
Line” message will be sent to the Control Room.
CATEGORY EVENT
ID PARTITION ZONE
(Unique) DESCRIPTION
SYSTEM TROUBLES
313 39953/954 Engineering Reset (changed encryption key)
No action required.
337 39950 Expansion Module DC Loss
3.8V DC voltage low or absent.
350 39953 Fail To Communicate GL45-3G experienced trouble sending signals and does not
expect a restore.
352 39955/956 Dialer Interface Lead Fail
Issue with dialer lead between GL45-3G and the alarm panel
(4 Wire interface).
356 39968 IP Path Poll Fail
The GL45-3G failed to poll requests via IP.
356 39969 Cellular Network Path Poll Fail
The GL45-3G failed its poll requests via the cellular network.
356 39970 SDW GL45-3G is offline
The GL45-3G is not responding to network requests.
GENERAL
ALARMS
140 39981 Auxiliary 1 – Auxiliary input on SDW-100-3G unit.
140 39982 Auxiliary 2 – Auxiliary input on SDW-100-3G unit.
140 39983 Auxiliary 3 – Auxiliary input on SDW-100-3G unit.
 Message originating from the Alarm Panel are forwarded immediately.
 Alarm Panel interface fail sent if not restored within 90 seconds.
Background Polling
Australian Contact ID Reporting Codes
Transmission Delay Times

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page9

Housing Material ABS plastic – white
Dimensions 110mm (h) x 25mm (d) x 80mm (w)
Weight 0.120Kg
Operating Environment 0° - 50° @ 15% to 85% humidity (non condensing)
Antenna Triple band 3G & Dual band GPRS
Modem Telit Wireless Solutions
Power 10 – 15V DC.
Power Consumption Standby: 0.08A @13.8V DC
Transmitting: 0.19A @ 13.8V DC
Communication Protocol Ethernet (10/100BASE-T)
Network Protocol DHCP or Static IP
Static IP Network Ethernet interface using ‘IpSetup’ program
Serial Port RS232 interface
Auxiliary Input 3 x 24Hr inputs – state change detected every second
End Of Line 3K3 resistors required
Auxiliary Output 3 x Open Collector outputs @ 50mA (max)
Function control using SafeDial Toolbox and/or
Pocket Secure
Configuration SafeDial Toolbox using cellular 3G connection
Approvals EN301489, EN301908, EN62311, EN60950-1
Specifications GL45-3G

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page10

SafeDial Toolbox is a secure web based platform designed for use by Bureaus and Installers.
All users can interrogate their SafeDial Wireless outstations remotely for installation, commissioning,
diagnostic and control purposes.
SafeDial Toolbox has been optimised to run on any touch screen phone, PC, tablet or iPad.
To access SafeDial Toolbox, simply go to www.safedialtoolbox.com.au
You will be prompted to enter your issued email address and password.

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page11

NOTES:
1) If you enter the wrong password three times SafeDial will send your password to your
registered email.
2) Anywhere within the application that you see , hover over the icon for more information
about a particular field.
3) In the instance where IP has been enabled at a site it is important to note that when an IP
connection is lost, it is not possible to ‘ping’ the unit until after the server has confirmed the loss
of the IP service. This will occur at the next poll cycle, therefore it is not possible to ‘ping’ the
unit for 4 hours from the time of the IP connection being lost. Any alarms or events that occur
during this period will be sent via 3G/GPRS.
Homepage – Log in Screen
SafeDial Toolbox is loacated at :-
https://safedial.permaconn.com






SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page12

1 Opens to Ping Page
To ping a unit enter the name serial or account number into text box and click “Ping”.
The Serial field is the unique Serial Number of the SafeDial Wireless unit.
The serial number can be found on the back of the product prior to mounting, or on the lid of the box the
unit is shipped in.
The Account is the unique four (4) digit Account Number provided by the Control Room.

2 Ping Results - Text Box now shows #xxxxx Axxxx
#xxxxx represents the Serial number
Axxxx represents the Account account
Text box will remain present whist inside the Ping Page.
NOTE:
If the area of the unit is located in is congested (high volume cellular traffic) you may need to
ping the unit two (2) or three (3) times to achieve a successful ping. This does not affect the
performance of the unit.

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page13

a) Requirements Tab


The Requirements Tab is the home page where all status data are displayed.
The left hand side of the screen displays the products current status while the right hand side of the screen
displays the last 100 contact ID messages.
Product = The model and interface type
Power supply = Will return either OK or Failed status. If failed, supply voltage is below the minimum
13.8V required.
Dialler Interface = Will return either OK or Failed status. This is the dialler lead between the Alarm Panel
and the GL45-3G. A four wire connection is required between the Alarm Panel dialler
and the GL45-3G. ‘Ring” (R) (Red) & ‘Tip’ (T) (Green) as the input and ‘R1’ (Black) &
‘T1’ (Yellow) as the return line.
NOTE:
It is possible for the Control Room to receive messages even though the Dialler Interface shows
failed. This means the return lines are wired incorrectly – DO NOT leave site until this wiring in
rectified, otherwise the Alarm Message “GSM Serial Lead Fail” will be sent to the Control Room.
Ethernet = Will return either OK or Failed status for the Ethernet connection.
Account Number = This is the Account Number sent by the Alarm Panel on the last contact ID
message. Account Numbers “0000” & “0001” are considered programming
errors.
Signal Strength = This is the 3G/GPRS reported signal strength.
[Pass (green)] : -51dB to -75dB
[Satisfactory (amber)] : -76dB to -85bD
[Fail (red)] : -86bD to -113dB
Text / Code to the right of the screen allows you to view the contact messages in either text or code format,
and will remain to your preferred view the next time you log into SafeDial Toolbox.

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page14

b) Information Tab
The Information Tab is the page where all product information is displayed.
SIM = Single SIM device
Poll State = Indicates the communication paths being used for Polling (IP and/or 3G/GPRS)
Poll Plan = Polling plan – 4 hours
Central Station = Control Room (Globe Wireless)
Bureau = Owner of the unit
Phone = This is the last phone number dialled by the Alarm Panel. If N/A then there is no dialler
capture.
c) Input/Output Tab
The Input/Output page displays status information of all inputs and outputs available in the product.
The outputs can be opened, closed and pulsed.
The inputs status will be displayed as either OK or Violated.
Addtionally, the Input/Output tab provides functionality to Default the Unit. By selecting the “Default Unit”
button, the SafeDial Wireless unit will be reset and loaded with its default settings.

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page15

d) IP Tab
The IP Tab displays the IP addresses and applicable configuration that the unit obtains when IP is
connected.
You can manually change any of these settings and then click “update” to write this information to the unit.

e) History Tab
The History Tab displays all previous activity / events and displays them with a time and date stamp.
E.g. Inputs, Outputs, Default, Activation, etc.
You can also enter notes by typing in the Notes entry field and hitting enter.
Note:
There are different user levers available (e.g. Control Room Administrator, Control Room Operator, Bureau
Administrator, Bureau Operator). Notes written by a Control Room can only be viewed by Control Room
level access, Comments from lower level access users can be read by all users with higher access.

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page16

3 Account Page
The Account page allows you to change your password.
Uploading and Downloading configurations to your Alarm Panel can be done using
Globe’s SafeDial Config utility software. Uploading / Downloading consumes bandwidth over the 3G/GPRS
network and therefore we limit the number of times you can do this in a given month to two (2). These are
referred to as Panel Client Software downloads.
The Account page also allows you to purchase more PCS (Panel Client Software) credits when the monthly
allocated credits have been exceeded.












4 Change Log Page
This Change Log page is a summary of all the updates and changes made to
SafeDial Toolbox.

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page17

5 Fleet Page
The Fleet page shows all units assigned to the user. In addition to viewing units
within the application, you can export the data into a CSV file for data manipulation,
reporting etc.
The Fleet tab is where you activate your GL45-3G units, please refer to Page 22 “Activating a GL45-3G” of
this manual for detailed instructions.
The icon ( ) to the left of every column is a shortcut to ping a unit, clicking on this icon will ping the unit
and take you directly to the Ping Page.
You can search any or all of the information in the “search box” to the right hand side of the screen. Should
you wish to search multiple columns, separate the key word from each column with a comma (,) i.e “3G,
P9” will provide search results for any unit that is listed as 3G in the “Modem” column, and any unit that is
on a “P9” plan in the “Pool Plan” column.
Each column represents:
Serial = Unit Serial Number
Account = Control Room Account Number
Type = Unit model type
Modem = 3G
Poll Plan = Current Poll Plan (4 hours)
Name = Customer name / address entered at the time of activation
Central Station = Control Room the unit is reporting to
Bureau = The Bureau who purchased the unit
Activation Date = Date when the unit was activated in Safedial Toolbox
Activation Signatory = The person who authorised the activation
PCS Credits = Number of PCS (Panel Client Software – SafeDial Config) Credits available per
month

SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page18

6 Activate Page
The Activate Page is for use by Permaconn clients only.
Safedial Toolbox is dual use and allows both Globe and Permaconn activations
under the one log in. This page is not applicable to the activation or interrogation of Globe GL45-3G
devices.
To Activate a GL45-3G please refer to the “Activating a GL45-3G” on Page 22 of this manual.
7 Transfer Page
The Transfer Page is for use by Permaconn clients only. Safedial Toolbox is dual
use and allows both Globe and Permaconn activations under the one log in.
This page is not applicable to the activation or interigation of Globe GL45-3G devices.
Should you wish to Transfer ownership of a GL45-3G, please contact Globe Wireless in writing at
[email protected] or call 1300 73 73 14 to discuss the transfer process.


SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page19

8 Users Page
The User Page allows you to Create, Edit, View, Delete or SMS users under your
fleet.
When you open this page your users are sorted by their access levels. You can view each access level via
the use of the drop down box (in this example “Control Room Operators” are being viewed). If you wish to
view the “Bureau Administrators” within your fleet, you can select this category from the drop down menu
box. You cannot view more than one access level at a time.

By clicking on “Edit” next to the profile of a user, you are able to “Add Restrictions” (this can also be done
when creating a user). Each level on users have “Restriction” options pertinent to their access rights.
a) User access restriction:
“Bureau Operator Restrictions”
“End User Restrictions”


SafeDial Wireless GL45-3G - GL V1.0 / PM V3
Page20

9 Central Station Page
The Central Station page shows all of your Control Rooms that you are assigned to.
For the GL45-3G devices the Central Station is always “Globe Wireless”.
If you are a Permaconn user, the Central Stations you have Permaconn units assigned to will also show in
the top list.
To add additional Central Stations simply click the Central Station from the list in the bottom half of the
screen and confirm when prompted. The Control Room will receive notification that you have added them to
your Central Stations list, if you are not a customer, they may remove themselves from your list. Please
contact the Control Room prior to adding them to “Your Central Station(s)”.