Safeline Sit'n'stroll User manual

1777 South Bellaire Street, Suite 330 ♦Denver, Colorado 80222

Phone: (303) 757-2400 ♦Fax: (303) 757-1988

E-mail: service@safelinecorp.com ♦ Website:www.safelinecorp.com

1-800-829-1625

U.S. Patents #5,104,134 and 4,620,771 International Patents Listed Inside

Child restraints could be recalled for safety reasons.You

must register this restraint to be reached in a recall.Send

your name, address and the restraint’s model number and

manufacturing date to Safeline Corporation, 1777 South

Bellaire Street, Suite #330, Denver, Colorado 80222 or call

303-757-2400.For recall information, call the U.S.

Government’s Auto Safety Hotline at 1-800-424-9393

(202-366-0123 in D.C.area).

Thank you for purchasing the Sit’n’Stroll 5-in-1

Combination Car Seat/Stroller™.The Sit’n’Stroll™

is the most advanced car seat/stroller available, and

we believe the simplest, safest and most convenient

way to travel with an infant.

The most important benefit the Sit’n’Stroll™ can provide is increased

protection for your child.Studies have shown the use of a child

restraint system reduces the likelihood of death and injury caused by

the tremendous forces involved in an automobile accident.Please

follow these instructions carefully to minimize the risk of injury or

death to your child in the event of a sudden stop or collision. No

system can guarantee the safety of your baby, but child restraints

have been proven so effective they are required in all 50 states and

by most industrialized nations in the world.

This Child Restraint System ConfThis Child Restraint System Conf

This Child Restraint System Conforms toorms to

orms toorms to

orms to

all Federal Motorall Federal Motor

all Federal MotorVV

VV

Vehicehic

ehicehic

ehicle Safle Saf

le Safle Saf

le Safety Standarety Standar

ety Standarety Standar

ety Standards.ds.

ds.ds.

ds.

This Restraint is CerThis Restraint is Cer

This Restraint is Certified ftified f

tified ftified f

tified for Use inor Use in

or Use inor Use in

or Use in

AirAir

Aircraft.craft.

craft.craft.

craft.

Limited Six MonthLimited Six Month

Limited Six Month WW

WW

Warrantyarranty

arrantyarranty

arranty

All Safeline products purchased from an authorized Safeline dealer

are warranted against defective materials and workmanship for six

months from the original date of purchase.This warranty does not

include any problems associated with normal wear, abuse, misuse

or negligence by the purchaser.This warranty also does not apply

to any Safeline product purchased secondhand.

The purchaser must complete the owner registration card within 30

days of purchase and provide original receipt as evidence of

original purchase date to file warranty claims.Registering your

Safeline product assures you can be reached in the event of a

safety recall.For recall information call the U.S.Government’s Auto

Safety Hotline at 1-800-424-9393 (202-366-0123 in D.C.area).

Safeline Corporation reserves the right to inspect all claims of

defective workmanship and materials in order to determine the

cause of all malfunctions.Furthermore, Safeline Corporation may

exercise its right to repair, replace or refund the original purchase

amount at the Company’s discretion and based on the conclusions

of its investigation.

11

1

Warranty 1

Get to KnowYour Sit’n’Stroll™ 3

Safety Guidelines:Warnings & Important Notes 4

RearFacing orForwardFacing? Determining the Correct Seating Position 6

SecuringYour Child in the Sit’n’Stroll™ & Adjusting the Harness System 7

RearFacing 7

ForwardFacing 8

ChoosinganAppropriateVehicleSeat 10

Installing the Sit’n’Stroll™ in theVehicle 11

RearFacing 11

ForwardFacing 15

TopTether Information 20

Installing theTopTether 20

RearFacing 20

ForwardFacing 20

Installing the Sit’n’Stroll™ on an Aircraft 21

Converting the Sit’n’Stroll™ from Car Seat to Stroller 21

OperatingtheSit’n’Stroll™Brakes 23

Converting the Sit’n’Stroll™ from Stroller to Car Seat 24

AttachingtheSunshade 25

RemovingtheHarness 27

InstallingtheHarness 27

MaintenanceandCare 28

VehicleManufacturer ContactTelephone Numbers andWebsites 29

TT

Tabab

abab

able of Contentsle of Contents

le of Contentsle of Contents

le of Contents

International PInternational P

International Patents and Descriptionsatents and Descriptions

atents and Descriptionsatents and Descriptions

atents and Descriptions

United States 5,104,134

4,620,771

ECOECO

ECO 257141257141

257141257141

257141

France 257141

Great Britain 257141

Germany P36 770 12.4

Canada 1,277,349

ECOECO

ECO 466429466429

466429466429

466429

France 466429

Great Britain 466429

The Netherlands 466429

Germany 69109384.9

Japan 2,554,798

Canada 2,046,740

(Serial Number)

2

FAILURETO FOLLOW EACH OF THE FOLLOWING

INSTRUCTIONS CAN RESULT INYOUR CHILD

STRIKINGTHEVEHICLE’S INTERIOR DURING A

SUDDEN STOP OR CRASH.

The instructions contained within this manThe instructions contained within this man

The instructions contained within this manual areual are

ual areual are

ual are

guidelines fguidelines f

guidelines for the pror the pr

or the pror the pr

or the proper use and adjustment of theoper use and adjustment of the

oper use and adjustment of theoper use and adjustment of the

oper use and adjustment of the

Sit’n’StrSit’n’Str

Sit’n’Stroll™.oll™.

oll™.oll™.

oll™. AlAl

AlAl

Alwawa

wawa

ways consult with yys consult with y

ys consult with yys consult with y

ys consult with your phour ph

our phour ph

our physician toysician to

ysician toysician to

ysician to

determine the specific needs of ydetermine the specific needs of y

determine the specific needs of your cour c

our cour c

our child.hild.

hild.hild.

hild.

WW

WARNINGARNING

ARNINGARNING

ARNING

Get to KnoGet to Kno

Get to Knoww

ww

wYY

YY

Your Sit’n’Strour Sit’n’Str

our Sit’n’Strour Sit’n’Str

our Sit’n’Stroll™oll™

oll™oll™

oll™

Front Wheel

Assembly

Rear Wheel Flap

Rear Wheel Assembly

Front Flap

Brake

Crotch Buckle

Harness

Adjuster

Chest Clip

Metal Slides

Handle Grips

Telescoping Handle

Stitch Line

UpperForward-Facing

VehicleBeltPath

(Forchildrenwhoweigh28(For children who weigh 28

(Forchildrenwhoweigh28

poundsandover)poundsandover)

poundsandover)

Rear-Facing

Vehicle Belt

Tabs

LowerForward-Facing

VehicleBeltPath

(Forchildrenwhoweigh(Forchildrenwhoweigh

(Forchildrenwhoweigh

lessthan28pounds)lessthan28pounds)

lessthan28pounds)

TetherBracket

Top Tether Tether

Adjuster

AdjusterBelt

33

3

♦This child restraint is designed for use by children who weigh between 5 and

40 pounds (2.3 kg to 18.1 kg) and whose height is between 18 and 40 inches

(45.8 cm to 101.6 cm).

♦REAR-FACING this unit is certified for use with children from 5 to 22 pounds

(2.3 kg to 9.9 kg). FORWARD-FACING it is certified for use from 20 to 40

pounds (9.1 kg to 18.1 kg).

♦Correct child restraint installation could be a matter of LIFE OR DEATH! You

must read and follow both your child restraint and automobile owner’s manual.

♦If your vehicle does not have top tether anchors installed, you must contact

your vehicle dealer or the vehicle manufacturer for parts, instructions and

installation. See the list at the back of this manual for vehicle manufacturer

contactinformation.

♦FAILURETO FOLLOWTHE MANUFACTURER’SINSTRUCTIONS ONTHE

USE OFTHIS CHILD RESTRAINT SYSTEM CAN RESULT INYOUR CHILD

STRIKINGTHEVEHICLE’S INTERIOR DURING A SUDDEN STOP OR

CRASH.

♦Accident statistics show that children are safer when properly secured in the

back seat.

♦Do not use this child restraint rear-facingrear-facing

rear-facingrear-facing

rear-facing in the front seat of a vehicle that

has a passenger side airbag unless the airbag is deactivated. Airbags inflate

from 100-200 mph (161-323 kph). The airbag impact can cause severe injury

or death.

♦If the Sit’n’Stroll™ is used forward-facingforward-facing

forward-facingforward-facing

forward-facing in the front seating position having

an airbag, move the vehicle seat as far back from the airbag as possible.

♦Securely belt this restraint into the vehicle at all times. An unsecured child

restraint may injure other occupants if a crash occurs.

♦The clothes your child wears will cause the harness fit to vary. It is neces-

sary to adjust the tightness with EVERY trip.

♦To avoid injury, this restraint should be installed and adjusted by an adult.

Never allow a child to buckle themselves into this car seat.

♦Metal and plastic parts can become very hot when exposed to the sun.

♦When not in use, place a blanket or towel over your Sit’n’Stroll™ if it will be in

the sun for long periods of time. Check to be sure the metal and plastic parts

are not too hot before placing your child in the seat.

♦If this restraint is involved in an accident, replace it regardless of appearance.

The vehicle seat belt must also be replaced. Damage is not always visible.

SafetyGuidelinesSafetyGuidelines

SafetyGuidelines

WW

Warnings&Imporarnings&Impor

arnings&Imporarnings & Impor

arnings&ImportantNotestantNotes

tantNotestantNotes

tantNotes

SecuretheSit’n’Stroll™inthecaratalltimesSecuretheSit’n’Stroll™inthecaratalltimes

SecuretheSit’n’Stroll™inthecaratalltimes

evenwhennotinusebyyourchild.Intheeventofevenwhennotinusebyyourchild.Intheeventof

evenwhennotinusebyyourchild.Intheeventof

asuddenstoporcollision,anunbeltedcarseatasuddenstoporcollision,anunbeltedcarseat

asuddenstoporcollision,anunbeltedcarseat

couldinjureotheroccupantsinthecarcouldinjureotheroccupantsinthecar

couldinjureotheroccupantsinthecar..

..

.

44

4

Important NotesImportant Notes

Important Notes

♦Refer to your vehicle’s owner’s manual for instructions on seat belt use and

how to install the restraint in your vehicle.

♦Do not use this child restraint in vehicles with:

Hinged seat backs that do not have a locking latch

Passive restraint belts that do not have lap belts

♦Only use the Sit’n’Stroll™ on forward-facing vehicle seats

♦Always use good common sense! If you have questions about your Safeline

product,pleasecallusat800-829-1625 or 303-757-2400.

♦Read this instruction manual completely before using the Sit’n’Stroll™.

♦Store the manual in the plastic bag and attached in the rear storage bin with

the supplied hook and loop.

♦The Sit’n’Stroll™is certified for use in motor vehicles and aircraft. This child

restraint system conforms to all applicable Federal motor vehicle safety

standards.

♦Some features of vehicle seat belts and vehicle seats that aid adult comfort

and protection are not compatible with child restraints. In some vehicles, a

child restraint may not fit securely in some, or any, seating positions.

♦Make sure to move the vehicle seat back to the most upright position before

securing the Sit’n’Stroll™into the vehicle.

♦Never carry a child on your lap while the car is moving. In the event of a

crash or sudden stop, you will not be able to hold your child and they will

likely be seriously injured or killed.

♦Never use a vehicle seat belt which is not fully functional or has been dam-

aged.

♦Never attempt to alter or modify your Sit’n’Stroll™. Doing so could reduce the

effectiveness of the restraint, possibly causing injury or death.

♦Do not leave any loose objects such as books, bags, etc. in the car. They

could become flying objects in the event of a crash or sudden stop. Injury

could result.

♦Do not place heavy objects on the Sit’n’Stroll™.

♦When travelling with your children, always use your Sit’n’Stroll™, even on

short trips. Remember, most crashes occur within 5 miles of the home.

♦Never allow your child to unbuckle the vehicle’s seat belt while the car is in

motion. Your child must remain restrained by the Sit’n’Stroll™5-point harness

system and the vehicle’s seat belt at all times in order to be securely re-

strained.

♦The shoulder straps must pass over the infant’s shoulders and between the

legs directly to the buckle. The child’s legs should remain on either side of

the crotch strap and buckle. The lap straps of the harness must always be

over the top of your child’s thighs.

♦No one can predict if a child restraint will prevent injury or death in any given

accident. However, proper use can reduce the child’s risk of injury and death

in most instances.

55

5

Do notDo not

Do not place this rear-facing car seat in a vehicle

seat with a passenger side air bag. In the event of a

sudden stop or collision, the force of an inflating air

bag can cause serious injury or death to a child. Not

following this warning places your child at serious

risk. Owners of vehicles with passenger side air

bags should refer to their owner’s manual for child

restraint installation instructions.

RearFRearF

RearFacingorForwaracingorForwar

acingorForwaracingorForwar

acingorForwardFdF

dFdF

dFacing?acing?

acing?acing?

acing?

DeterminingtheCorrectSeatingPDeterminingtheCorrectSeatingP

DeterminingtheCorrectSeatingPositionosition

ositionosition

osition

Determining the direction you should face your child is one of the most important

decisions regarding the safety of a child in a car seat.Safety experts recommend

your child remain in the rear-facing position until he or she is at least 20 pounds

andand

and at least 1 year of age.The Sit’n’Stroll™ is certified for use by children up to

22pounds in the rear-facing positionand up to 40 poundsin the forward-facing

position. Consider both the weight and age guidelines when determining the

direction in which you should face your child while traveling in a vehicle.A child

under one year of age may not have the physiological development necessary to

sustain the forces involved in a sudden stop or collision while sitting in a forward-

facing position. Consult with yConsult with y

Consult with yConsult with y

Consult with your phour ph

our phour ph

our physician to determine yysician to determine y

ysician to determine yysician to determine y

ysician to determine your cour c

our cour c

our child’hild’

hild’hild’

hild’s specifics specific

s specifics specific

s specific

needs.needs.

needs.

♦Always use the Sit’n’Stroll™ rear-facing if your baby weighs less than 20

pounds or is less than 1 year of age (and less than 22lbs), unless otherwise

directed by your child’s physician.

♦When your child weighs at least 20 pounds, but less than 22 pounds, and the

top of his or her head is below the top of the stitch line, you can still use the

Sit’n’Stroll™ in the rear-facing position.However, you may use the

Sit’n’Stroll™ in the forward-facing position.

♦If your child’s head is higher than the stitch line when he or she is sitting in the

Sit’n’Stroll™ or if your child weighs more than 22 pounds, you must use the

Sit’n’Stroll™ in the forward-facing postion.

If your child meets all of the above guidelines for the rear-facing

position, but his or her legs are too long, have him or her sit with his or

her legs crossed.Your child is generally safer remaining in the rear-

facing position for as long as the rear-facing guidelines are applicable.

66

6

SecuringyourChildintheSit’n’Stroll™SecuringyourChildintheSit’n’Stroll™

SecuringyourChildintheSit’n’Stroll™

&AdjustingtheHarnessSystem&AdjustingtheHarnessSystem

&AdjustingtheHarnessSystem

On hot or sunny days, always check the fabric andOn hot or sunny days, always check the fabric and

On hot or sunny days, always check the fabric and

metal buckles before placing your child in themetal buckles before placing your child in the

metal buckles before placing your child in the

restraint to avoid burns or discomfort.restraint to avoid burns or discomfort.

restraint to avoid burns or discomfort.

Never use the Sit’n’StrollNever use the Sit’n’Stroll

Never use the Sit’n’Stroll

™™

™

without the harnesswithout the harness

without the harness

securely buckled around your child and adjusted tosecurely buckled around your child and adjusted to

securely buckled around your child and adjusted to

yy

your cour c

our cour c

our child’hild’

hild’hild’

hild’s sizs siz

s sizs siz

s sizee

ee

e..

..

.

Before using your new Sit’n’StrollBefore using your new Sit’n’Stroll

Before using your new Sit’n’Stroll

T™T™

T™

you must adjustyou must adjust

you must adjust

the harness system to fit your child. It is importantthe harness system to fit your child. It is important

the harness system to fit your child. It is important

to adjust the harness system every time you placeto adjust the harness system every time you place

to adjust the harness system every time you place

your child in the Sit’n’Strollyour child in the Sit’n’Stroll

your child in the Sit’n’Stroll

™™

™

..

.

If your child is under one year of age and22 poundsIf your child is under one year of age and22 pounds

If your child is under one year of age and22 pounds

and his or her head is not yet to the top of the stitchand his or her head is not yet to the top of the stitch

and his or her head is not yet to the top of the stitch

line, you should install the Sit’n’Strollline, you should install the Sit’n’Stroll

line, you should install the Sit’n’Stroll

™™

™

rear-facingrear-facing

rear-facing

in the vehicle. If your child is over one year of agein the vehicle. If your child is over one year of age

in the vehicle. If your child is over one year of age

and at least 20 pounds, follow forward-facingand at least 20 pounds, follow forward-facing

and at least 20 pounds, follow forward-facing

instructions. Between 20 and 22 pounds you mayinstructions. Between 20 and 22 pounds you may

instructions. Between 20 and 22 pounds you may

use the Sit’n’Strolluse the Sit’n’Stroll

use the Sit’n’Stroll

™™

™

forward-facingforward-facing

forward-facing

if your child is atif your child is at

if your child is at

least one year of age.least one year of age.

least one year of age.

Rear FacingRear Facing

Rear Facing

Crotch

Buckle

Latch Plates

Red

Button

77

7

Proper adjustment of the harness system for use rear-facing

1. Open the buckle by pressing the red button and

pulling the latch plates from the buckle. Open

the chest clip.

2. Place your child into the seat, making sure his

or her bottom is fully against the base of the

seat.

3. The shoulder straps should be at or below your

child’s shoulders. Use the lower shoulder belt

slots. Use the shortest adjuster belt loop.

Proper adjustment of the harness system for use forward-facing

1. Open the buckle by pressing the red button and pulling the latch plates from

5. Ensure the belts are not twisted.

6. Click the latch plates into the buckle. Pull up

on both latch plates to ensure they are securely

fastened.

7. Snap the chest clip back together. Slide the

chest clip so it is at your child’s armpit level. If

your child is smaller, you may need to remove

the shoulder pads to fully tighten the harness

and ensure proper placement of the chest clip.

8. Pull on the belt over the child’s left leg to snug

the harness. This belt goes under the seat and

attaches to the right lap and shoulder belts.

Tighten the harness by pulling the adjuster belt.

The harness should be tight enough for you to

onlyget one finger betweenthe shoulder belt

andyour child.

9. To loosen the harness, squeeze the adjuster

topand bottom and pull up.

Forward FacingForward Facing

Forward Facing

the buckle. Open the chest clip.

2. Place your child into the seat, making sure

their bottom is fully against the base of the

seat.

3. The shoulder straps should fit through the

shoulder belt slots, which are at or above the

Latch Plates

Crotch

Buckle

Red

Button

Chest

Clip

Adjuster

Crotch

Buckle

Latch

Plates

88

8

4. To move the straps to the proper slot position,

loosen the harness adjuster. At the back of the

Sit’n’Stroll™ remove the shoulder belts from the

metal hooks. Pull the shoulder belts from the

front of the seat and place back through the

desired slots. Reattach the shoulder belts to

the metal hooks. Be sure the belts lay flat

against the back of the seat shell. If they are

over the stroller conversion handle you will not

be able to convert the Sit’n’Strol™to stroller

mode.

Metal

Hooks

10. To loosen the harness, squeeze the adjuster

topand bottom and pull up.

Infants and other small children may require additional head and

posture support when using the Sit’n’Stroll™ to avoid injury or

suffocation.Bolsters may assist in supporting the neck and head of a

small child.Retailers of children’s products generally carry bolsters in

their accessory aisles. If you have questions regarding bolsters,

please contact Safeline or the American Academy of Pediatrics.

Tips

Adjuster

ShoulderBeltSlotsShoulderBeltSlots

ShoulderBeltSlots

Upper

Middle

Lower

99

9

child’s shoulders. If the shoulder belts are

below his or her shoulders, you must adjust

them to a higher set of slots.

4. The adjuster belt has three loops for use

depending on your child’s size. When you

move the shoulder belts to the middle or upper

shoulder belt slots, use the middle or end

adjusterbelt loop.

5. To move the straps to another slot position,

loosen the harness adjuster. At the back of the

Sit’n’StrollTM remove the shoulder belts from the

metal hooks. Pull the shoulder belts from the

front of the seat and place back through the

desired slots. Reattach the shoulder belts to

the metal hooks. Be sure the belts lay flat

against the back of the seat shell. If they are

over the stroller conversion handle you will not

be able to convert the Sit’n’Stroll™ to stroller

mode.

6. Ensure the belts are not twisted.

7. Click the latch plates into the buckle. Pull up

on both latch plates to assure they are securely

fastened.

8. Snap the chest clip together. Slide the chest

clip so it is at your child’s armpit level.

9. Pull on the belt over your child’s left leg to snug

the harness. This belt goes under the seat and

attaches to the right lap and shoulder belts.

Tighten the harness by pulling the adjuster belt.

The harness should be tight enough for you to

onlyget one finger betweenthe shoulder belt

and your child.

According to accident statistics, childrenAccording to accident statistics, children

According to accident statistics, children

are safer when properly restrained in theare safer when properly restrained in the

are safer when properly restrained in the

rear seating positions than in the frontrear seating positions than in the front

rear seating positions than in the front

seatingpositions.seatingpositions.

seatingpositions.

ChoosinganApprChoosinganAppr

ChoosinganAppropriateopriate

opriateopriate

opriateVV

VV

Vehicehic

ehicehic

ehicleSeatLocationleSeatLocation

leSeatLocationleSeatLocation

leSeatLocation

The Sit’n’Stroll™ was designed to be used in automobiles and airplanes, and

should not be used in boats or on motorcycles.The Sit’n’Stroll™ must be posi-

tioned in a seat that faces the front of the vehicle. The Sit’n’Stroll™ was not

designed to be used in seats facing the rear or the center of the vehicle, and it is

dangerous to install and use the Sit’n’Stroll™ in any such seat.The back seat is

thesafestlocationforchildren12andunder.

Seethedrawingsbelowforfurtherclarification.Seethedrawingsbelowforfurtherclarification.

Seethedrawingsbelowforfurtherclarification.

CorrectPosition!CorrectPosition!

CorrectPosition!

Thecenter rear seating

location is generally the

safest position for your child.

CorrectPosition!CorrectPosition!

CorrectPosition!

Always install your

Sit’n’Stroll™ in a vehicle

seat that faces the front of

the vehicle.

Danger!Danger!

Danger!

Do not install your

Sit’n’Stroll™ in a vehicle

seat that faces the center of

the vehicle.

Danger!Danger!

Danger!

Do not install your

Sit’n’Stroll™ in a vehicle

seat that faces the rear of

the vehicle.

1010

10

Placing your child in the forward-facing position beforePlacing your child in the forward-facing position before

Placing your child in the forward-facing position before

he or she is over one year old and over 20 pounds,he or she is over one year old and over 20 pounds,

he or she is over one year old and over 20 pounds,

places your child at serious risk. Before placing yourplaces your child at serious risk. Before placing your

places your child at serious risk. Before placing your

child in the forward-facing position, consider both thechild in the forward-facing position, consider both the

child in the forward-facing position, consider both the

weight and age guidelines for the forward-facingweight and age guidelines for the forward-facing

weight and age guidelines for the forward-facing

postion. Consult with your physician to determine thepostion. Consult with your physician to determine the

postion. Consult with your physician to determine the

individual needs of your child.individual needs of your child.

individual needs of your child.

Installing the Sit’n’StrInstalling the Sit’n’Str

Installing the Sit’n’Strolloll

olloll

oll™™

™™

™in thein the

in thein the

in the VV

VV

Vehicehic

ehicehic

ehiclele

lele

le

II

If you do not use the top tether, remove the tether from the Sit’n’Stroll

™

and store in a secure location. An unsecured top tether could cause

injury if not properly stored.

Rear FacingRear Facing

Rear Facing

Tips

Check your vehicle to determine which type of seat belt system you have. Some

vehicles have more than one type of belt system depending on the seating

position. The center rear position may have a lap only belt while the side seating

locations may have a lap-shoulder system. If you are not sure which system you

have, check your vehicle owner’s manual or contact your vehicle dealer or manu-

facturer.

Do not use this child restraint rear facing in the frontDo not use this child restraint rear facing in the front

Do not use this child restraint rear facing in the front

seat of a vehicle that has a passenger side airbagseat of a vehicle that has a passenger side airbag

seat of a vehicle that has a passenger side airbag

unless the airbag is deactivated. Airbags inflate fromunless the airbag is deactivated. Airbags inflate from

unless the airbag is deactivated. Airbags inflate from

100-200 mph (161-323 kph). Such a great force hitting a100-200 mph (161-323 kph). Such a great force hitting a

100-200 mph (161-323 kph). Such a great force hitting a

rear facing child restraint may severely injure or kill anrear facing child restraint may severely injure or kill an

rear facing child restraint may severely injure or kill an

infant.infant.

infant.

If, after installing the Sit’n’StrollIf, after installing the Sit’n’Stroll

If, after installing the Sit’n’Stroll

™™

™

, it is not tight enough,, it is not tight enough,

, it is not tight enough,

move it to another seating location. If it still cannot bemove it to another seating location. If it still cannot be

move it to another seating location. If it still cannot be

secured tightlsecured tightl

secured tightlyy

yy

y,,

,,

,contact ycontact y

contact ycontact y

contact your vehicour vehic

our vehicour vehic

our vehicle dealer and requestle dealer and request

le dealer and requestle dealer and request

le dealer and request

that a manual seat belt system be installed.that a manual seat belt system be installed.

that a manual seat belt system be installed.

There are some vehicle seat belt systems which will notThere are some vehicle seat belt systems which will not

There are some vehicle seat belt systems which will not

securely restrain the Sit’n’Strollsecurely restrain the Sit’n’Stroll

securely restrain the Sit’n’Stroll

™™

™

. Follow the instruc-. Follow the instruc-

. Follow the instruc-

tions in this manual and in the vehicle manual exactlytions in this manual and in the vehicle manual exactly

tions in this manual and in the vehicle manual exactly

to assure correct installation.to assure correct installation.

to assure correct installation.

Never use only the top tether to install the Sit’n’StrollNever use only the top tether to install the Sit’n’Stroll

Never use only the top tether to install the Sit’n’Stroll

™™

™

..

.

It is necessary to use the vehicle seat belt system withIt is necessary to use the vehicle seat belt system with

It is necessary to use the vehicle seat belt system with

the top tetherthe top tether

the top tether..

..

.Serious injurSerious injur

Serious injurSerious injur

Serious injury or death could result ify or death could result if

y or death could result ify or death could result if

y or death could result if

only the top tether is used.only the top tether is used.

only the top tether is used.

1111

11

Automatic (passive) Seat BeltsAutomatic (passive) Seat Belts

Automatic (passive) Seat Belts

This type of seat belt system will not hold a

restraint tightly in place if the lap belt does not

lock automatically. In a sudden stop or crash,

the restraint may move too far forward to be

safe. The only way to use this seat belt system

with the Sit’n’Stroll™is with a belt shortening

(heavy duty locking) clip. Obtain belt-shorten-

ing clips from your vehicle manufacturer. To

install a belt-shortening clip, see instructions

provided by your vehicle dealer or vehicle

owner’smanual.

(Seethe picture belowshowing shoulder beltattached to automobile door)

Check your vehicle owner’s manual for advice on where and how to install a child

restraint. Your vehicle dealer may have a replacement lap belt that, when installed,

will hold the restraint tightly. (Disconnect the passive belt system when using a

NEVER use the locking clip provided with theNEVER use the locking clip provided with the

NEVER use the locking clip provided with the

Sit’n’Stroll™ with this type of seat belt system.Sit’n’Stroll™ with this type of seat belt system.

Sit’n’Stroll™ with this type of seat belt system.

It is not strong enough to hold the restraint. ItIt is not strong enough to hold the restraint. It

It is not strong enough to hold the restraint. It

may bend and release the vehicle belt in themay bend and release the vehicle belt in the

may bend and release the vehicle belt in the

event of sudden stop or crash.event of sudden stop or crash.

event of sudden stop or crash.

replacementlap belt.)

Lap Shoulder Belts with Sewn Latch PlatesLap Shoulder Belts with Sewn Latch Plates

Lap Shoulder Belts with Sewn Latch Plates

(See the picture below showing the lap and shoulder belts sewn to the latch plate

as in many General Motors vehicles)

WhenusingtheSit’n’Stroll™intherear-facingWhenusingtheSit’n’Stroll™intherear-facing

WhenusingtheSit’n’Stroll™intherear-facing

position,position,

position,threadtheSit’n’StrthreadtheSit’n’Str

threadtheSit’n’StrthreadtheSit’n’Str

threadtheSit’n’Stroll™’oll™’

oll™’oll™’

oll™’s5-pointharnesss5-pointharness

s5-pointharnesss5-pointharness

s5-pointharness

systemthroughtheshoulderslotsatorbelowthesystemthroughtheshoulderslotsatorbelowthe

systemthroughtheshoulderslotsatorbelowthe

shouldersofthechild.shouldersofthechild.

shouldersofthechild.

1212

12

ManuallyAdjustedLapBeltsandLockingLatchPlatesManuallyAdjustedLapBeltsandLockingLatchPlates

ManuallyAdjustedLapBeltsandLockingLatchPlates

1. Place the Sit’n’Stroll™in a rear facing position

in the car.

2. Thread the lap belt through the rear facing

vehicle-belt tabs. Click the latch plate into

the buckle.

3. Push down firmly on the Sit’n’Stroll™to sink it

into the car’s seat cushion, while pulling on

the end of the lap belt or shoulder part of the

lap/shoulder belt. You may have to press on

one armrest at a time to get the auto belt

tight. Pull the seat belt as tight as possible

across the unit.

4. Be sure the back of the Sit’n’Stroll™is at a

45-degree angle. The base of the seat should

be horizontal. Use a tightly rolled towel or

sheet under the seat base to adjust the angle

if necessary.

5. Secure the top tether to the tether anchor in

the vehicle if desired.

6. Lift up on the Sit’n’Stroll™to check that it is

securely tightened. If it moves away from the

auto seat, retighten the auto seat belts.

7. If you have tightened the belt and it is still not

secure, move it to another seating location

and repeat steps 1-6. If there is no location

in your vehicle that will securely hold the

restraint, do not use it! Contact you vehicle

dealer to have a vehicle belt installed that will

remaintight.

Be sure the car seat belts are not twisted.Be sure the car seat belts are not twisted.

Be sure the car seat belts are not twisted.

Rear-FacingTabs

1313

13

Switchable RetractorsSwitchable Retractors

Switchable Retractors

This type of seat belt system stays loose during normal driving. However, they

have special retractors which allow use with child restraints. Read your vehicle

owner’s manual and look for a label on the vehicle seat belt. Note:Note:

Note:Note:

Note: Not all vehicNot all vehic

Not all vehicNot all vehic

Not all vehiclele

lele

le

belts with switchable retractors have instructions for securing child restraintsbelts with switchable retractors have instructions for securing child restraints

belts with switchable retractors have instructions for securing child restraints

on the vehicle belt.on the vehicle belt.

on the vehicle belt.

1. Pull the vehicle belt all the way out.

2. Followsteps1-6inthedirectionsformanuallyadjustedbelts.

3. Check to ensure the vehicle belt is securely locked by pulling slowly on the

shoulder portion of the belt. It should remain locked. If it is not locked, allow

the car seat belt to fully retract and repeat.

Lap/Shoulder Belt with BucLap/Shoulder Belt with Buc

Lap/Shoulder Belt with Bucklekle

klekle

kleTT

TT

Tongue thatongue that

ongue thatongue that

ongue that

Slides FreelSlides Freel

Slides Freely Along Seat Belty Along Seat Belt

y Along Seat Belty Along Seat Belt

y Along Seat BeltWW

WW

Webbingebbing

ebbingebbing

ebbing

1. Place the vehicle lap belt over the Sit’n’Stroll™

and position it through the rear facing vehicle-

belt tabs. Click the latch plate into the buckle.

2. Push down firmly on the Sit’n’Stroll™to sink it

into the car’s seat cushion, while pulling on the

shoulder part of the lap/shoulder belt. You may

have to press on one armrest at a time to get

the auto belt tight. Pull the seat belt as tight as

possible across the unit.

3. Holdthe lapand shoulder beltstogether behind

the latch plate . Unbuckle the belt while holding

thebelts together.

Free sliding lap/shoulder belts have a free sliding latchFree sliding lap/shoulder belts have a free sliding latch

Free sliding lap/shoulder belts have a free sliding latch

plate that does not locplate that does not loc

plate that does not lock to the belt.k to the belt.

k to the belt.k to the belt.

k to the belt.

When placing theWhen placing the

When placing the

Sit’n’Stroll™ in seating positions equipped with thisSit’n’Stroll™ in seating positions equipped with this

Sit’n’Stroll™ in seating positions equipped with this

system, you must use a locking clip to prevent thesystem, you must use a locking clip to prevent the

system, you must use a locking clip to prevent the

seatbelt from slipping, unless it has aseatbelt from slipping, unless it has a

seatbelt from slipping, unless it has a

ss

switcwitc

witcwitc

witchabhab

habhab

hable retractorleretractor

leretractorleretractor

leretractor..

..

.

1414

14

4. Thread the locking clip onto both belts , placing it as close to the

latch plate as possible.

5. Buckle the belt again. It may be necessary to press the Sit’n’Stroll™

into the auto seat cushion to get it buckled.

6. Secure the top tether to the tether anchor in the vehicle if desired.

7. Be sure the back of the Sit’n’Stroll™is at a 45-degree angle. The

base of the seat should be horizontal. Use a tightly rolled towel or

sheet (or the top tether if it is being used) to adjust the angle of the

seat if necessary.

8. Lift up on the Sit’n’Stroll™to check that it is securely tightened. The

belt should be tight around the restraint. If it is not, remove the

locking clip and repeat steps 1-6. If you have tightened the belt and

it is still not secure, move it to another seating location and repeat

steps 1-7. If there is no location in your vehicle that will securely

hold the restraint, do not use it! Contact your vehicle dealer to have

a vehicle belt installed that will remain tight.

InstallingtheSit’n’StrInstallingtheSit’n’Str

InstallingtheSit’n’Strolloll

olloll

oll™™

™™

™intheinthe

intheinthe

intheVV

VV

Vehicehic

ehicehic

ehiclele

lele

le

ForwarForwar

Forward-Fd-F

d-Fd-F

d-Facingacing

acingacing

acing

The Sit’n’Stroll™is equipped with two belt paths for use forward facing. The path

best suited for your child is determined by their height and weight.

♦If your child is taller than 33 inches and weighs over 28 pounds, the vehicle

seat belt should be secured in the upper forward-facing vehicle belt path.

♦If your child is under 33 inches and weighs less than 28 pounds, the vehicle

seat belt should be secured in the lower forward-facing vehicle belt path.

Use the vehicUse the vehic

Use the vehicle belt path based upon yle belt path based upon y

le belt path based upon yle belt path based upon y

le belt path based upon your cour c

our cour c

our child’hild’

hild’hild’

hild’s height and weight.s height and weight.

s height and weight.s height and weight.

s height and weight.

If, after installing the Sit’n’StrollIf, after installing the Sit’n’Stroll

If, after installing the Sit’n’Stroll

™™

™

, it is not tight enough,, it is not tight enough,

, it is not tight enough,

move it to another seating location. If it still cannot bemove it to another seating location. If it still cannot be

move it to another seating location. If it still cannot be

secured tightlsecured tightl

secured tightlyy

yy

y,,

,,

,contact ycontact y

contact ycontact y

contact your vehicour vehic

our vehicour vehic

our vehicle dealer and requestle dealer and request

le dealer and requestle dealer and request

le dealer and request

that a manual seat belt system be installed.that a manual seat belt system be installed.

that a manual seat belt system be installed.

1515

15

If you do not use the top tether, remove the tether from the Sit’n’Stroll

™

and store in a secure location. An unsecured top tether could cause

injury if not properly used.

Check your vehicle to determine which type of seat belt system you have. Some

vehicles have more than one type of belt system depending on the seating

position. The center rear position may have a lap only belt while the side seating

locations may have a lap-shoulder system. If you are not sure which system you

have, check your vehicle owner’s manual or contact your vehicle dealer or

manufacturer.

Tips

Automatic (passive) Seat BeltsAutomatic (passive) Seat Belts

Automatic (passive) Seat Belts

Seepicture belowshowingshoulderbelt attached to automobiledoor.

NeveruseanautomaticseatbeltsystemtosecureNeveruseanautomaticseatbeltsystemtosecure

Neveruseanautomaticseatbeltsystemtosecure

theSit’n’Stroll™inthevehicle.Thebelt(s)movetheSit’n’Stroll™inthevehicle.Thebelt(s)move

theSit’n’Stroll™inthevehicle.Thebelt(s)move

asthecardoorisopenedortheengineisstartedasthecardoorisopenedortheengineisstarted

asthecardoorisopenedortheengineisstarted

andwillnotproperlysecuretheSit’n’Stroll™.andwillnotproperlysecuretheSit’n’Stroll™.

andwillnotproperlysecuretheSit’n’Stroll™.

For your child’s safety, the Sit’n’Stroll™’s patented design provides

double-belted protection for your child and is designed to use your

automobile’s seat belt the way it was originally designed—to go

across the front of the occupant.

There are some vehicle seat belt systems which will notThere are some vehicle seat belt systems which will not

There are some vehicle seat belt systems which will not

securely restrain the Sit’n’Strollsecurely restrain the Sit’n’Stroll

securely restrain the Sit’n’Stroll

™™

™

. Follow the instruc-. Follow the instruc-

. Follow the instruc-

tions in this manual and in the vehicle manual exactly totions in this manual and in the vehicle manual exactly to

tions in this manual and in the vehicle manual exactly to

assure correct installation.assure correct installation.

assure correct installation.

Never use only the top tether to install the Sit’n’StrollNever use only the top tether to install the Sit’n’Stroll

Never use only the top tether to install the Sit’n’Stroll

™™

™

..

.

It is necessary to use the vehicle seat belt system withIt is necessary to use the vehicle seat belt system with

It is necessary to use the vehicle seat belt system with

the top tetherthe top tether

the top tether..

..

.Serious injurSerious injur

Serious injurSerious injur

Serious injury or death could result ify or death could result if

y or death could result ify or death could result if

y or death could result if

only the top tether is used.only the top tether is used.

only the top tether is used.

1616

16

There are two basic types of automatic belts: automatic shoulder belts or and

automatic lap/shoulder belts. Both types automatically move around a passenger

when the car door is closed and the car is started. The seat belts will stay loose

until there is a sudden stop or crash.

Check your vehicle owner’s manual for advice on where and how to install a child

restraint. Your vehicle dealer may have a replacement lap belt that, when installed,

will hold the restraint tightly. (Disconnect the passive belt system when using a

replacementlap belt.)

LapShoulderBeltswithSewnLatchPlatesLapShoulderBeltswithSewnLatchPlates

LapShoulderBeltswithSewnLatchPlates

ManuallyAdjustedLapBeltsandLockingLatchPlatesManuallyAdjustedLapBeltsandLockingLatchPlates

ManuallyAdjustedLapBeltsandLockingLatchPlates

This type of seat belt system will not hold a

restraint tightly in place if the lap belt does

not lock automatically. In a sudden stop or

crash, the restraint may move too far forward

to be safe. The only way to use this seat

belt system with the Sit’n’StrollTM is with a

belt shortening (heavy duty locking) clip.

Obtain belt-shortening clips from your vehicle

manufacturer. To install a belt-shortening

clip, see instructions provided by your

vehicle dealer or vehicle owner’s manual.

NEVER use the locking clip provided with theNEVER use the locking clip provided with the

NEVER use the locking clip provided with the

Sit’n’StrollSit’n’Stroll

Sit’n’Stroll™™

™™

™with this type of seat belt system.with this type of seat belt system.

with this type of seat belt system.with this type of seat belt system.

with this type of seat belt system.

It is not strong enough to hold the restraint.It is not strong enough to hold the restraint.

It is not strong enough to hold the restraint.

It may bend and release the vehicle belt in theIt may bend and release the vehicle belt in the

It may bend and release the vehicle belt in the

event of a sudden stop or crash.event of a sudden stop or crash.

event of a sudden stop or crash.

1717

17

1. Place the Sit’n’Stroll™in the vehicle forward

facing.

2. Place the lap belt around the front of the

Sit’n’Stroll™and position it through the

appropriateforward-facing vehiclebelt path.

Click the latch plate into the buckle.

3. Push down firmly on the Sit’n’Stroll™to sink it

into the car’s seat cushion while pulling on the

end of the lap belt or shoulder part of the lap/

shoulder belt. You may have to press on one

armrest at a time to get the auto belt tight.

Pull the seat belt as tight as possible across

the unit.

4. Secure the top tether to the vehicle tether

anchorif desired.

5. Rock the Sit’n’Stroll™sideways and pull it

forward from the vehicle’s seat to check it is

securely tightened. If it moves away from the

vehicle seat, retighten the vehicle seat belts.

6. If you have tightened the belt and it is still not

secure, move it to another seating location and

repeat steps 1-5. If there is no location in your

vehicle that will securely hold the restraint, do

not use it! Contact your vehicle dealer to have

a vehicle belt installed that will remain tight.

This type of seat belt system stays loose during normal driving. However, they

have special retractors which allow use with child restraints. Read your vehicle

owner’s manual and look for a label on the vehicle seat belt. Note: Not all vehicle

belts with switchable retractors have instructions for securing child restraints on

the vehicle belt.

1. Pull the vehicle belt all the way out. You may hear a ratchet sound as the belt

retracts into the car frame.

2. Follow steps 1-5 in the directions for manually adjusted belts above.

3. Ensure the vehicle belt is securely locked by pulling slowly on the shoulder

portion of the belt. It should remain locked. If it is not locked, allow the car

seat belt to fully retract and repeat.

Be sure the vehicle seat belts are not twisted.Be sure the vehicle seat belts are not twisted.

Be sure the vehicle seat belts are not twisted.

1818

18

Switchable RetractorsSwitchable Retractors

Switchable Retractors

Safeline Sit'n'Stroll User manual

Popular Stroller manuals by other brands