Safran MorphoSmart MSO300 User manual

MorphoSmart™ Fingerprint scanners Installation Guide
May 2015
SSE-0000080361-05
Version 2.17
MSO300
MSO301
MSO350
MSO351
MSO1300
MSO1350
MorphoSmart™ Fingerprint scanners
Installation Guide

MorphoSmart™ Fingerprint scanners Installation Guide
Copyright notices
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
2
Copyright notices
Copyrights 2002-2015 Morpho, All rights reserved.
Information in this document is subject to change without notice and does
not represent a commitment on the part of Morpho. No part of this
document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying or recording, for any
purpose without the express written permission of Morpho.
The software described in this document is supplied under a license
agreement or nondisclosure agreement. It is against the law to copy the
software on any medium except as specifically allowed in the agreement.
This manual makes reference to names and products that are trademarks of
their respective owners.
PROPRIETARY RIGHTS
This document contains information of a proprietary nature to Morpho and is
submitted in confidence for a specific purpose. The recipient assumes
custody and control and agrees that this document will not be copied or
reproduced in whole or in part, nor its contents revealed in any manner or to
any person except to meet the purpose for which it was delivered.
This caveat is applicable to all the pages of this document.

MorphoSmart™ Fingerprint scanners Installation Guide
Revision History
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
3
Revision History
Revision
Date
Document revision history
1.0
8November 2002
Creation of the document
1.1
November 2002
Add chapter “MSO100 Material Compatibility”
1.2
December 2002
Add chapter “Finger positioning”
1.3
January 2003
Clarifications
1.4
July 2003
Add chapter “MSO300”
1.5
October 2003
Precisions with the LEDS states
1.6
March 2004
MSO 300 S getting started
1.7
June 2004
Add information about Smart Card option
Add MSO3xx suspend mode LEDs status
1.8
July 2004
Add MMI description for MSO350
Add IDENTLITE license reference
1.9
December 2004
Precisions with the LEDS states
Add MSO CBM
2.0
April 2005
Update of hotline phone number
2.1
July 2005
Added the MSO xx1 products reference
2.2
September 2005
Add the "SAGEM MorphoSmart™ Service Provider Usb Server"
installation in the USB driver installation for MSO3xx and CBM.
2.3
January 2006
Added installation procedure for Windows XP ® embedded.
2.4
June 2006
Minor form modifications
Corrected performance description
2.5
December 2006
FCC recommendations
2.6
August 2007
Updated company name
Removed MSO100 items.
2.7
December 2007
Added the MSO1350 model
2.8
May 2008
New plan.
Upgrade biometric performances description.
2.9
March 2009
Add IP (Ingress Protection) rating (see IP Rating)
Change hotline address
Add information about USB driver installation (see Note for
administrators)
2.10
September 2009
Update hotline mail address

MorphoSmart™ Fingerprint scanners Installation Guide
Revision History
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
4
2.11
July 2010
Update company name to Morpho
2.12
April 2011
Add MSO1200 device
2.13
May 2011
Font change
2.14
June 2012
Update hotline mail address
New order in section Recommendations
New recommendation: Cable bend radius
2.15
March 2013
Update registered office address
2.16
October 2013
Update MSO1300 and MSO1350 pictures (from 2014)
2.17
May 2015
Update footer legal text

MorphoSmart™ Fingerprint scanners Installation Guide
Table of Contents
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
5
Table of Contents
1. Overview.......................................................................................................................................................10
1.1 Welcome to MorphoSmart™ .......................................................................................................................... 10
1.2 Contents .......................................................................................................................................................... 10
2. MorphoSmart™ terminal installation............................................................................................................11
2.1 Safety instructions........................................................................................................................................... 11
2.2 MorphoSmart™ Hardware Platform Compatibility......................................................................................... 11
2.3 Host system is a Windows™ PC....................................................................................................................... 12
2.3.1 Installation of a MorphoSmart™ USB device (MSO3xx, MSO13x0)........................................................ 12
2.3.2 Installation a MorphoSmart™ RS232 terminal (MSO20x) ...................................................................... 12
2.3.3 MorphoSmart™ SDK ............................................................................................................................... 12
2.4 Host system is not a Windows™ PC ................................................................................................................ 14
2.4.1 RS232 connection ................................................................................................................................... 14
2.4.2 USB connection ...................................................................................................................................... 14
3. MorphoSmart™ USB driver installation.........................................................................................................15
3.1 MorphoSmart™ USB driver setup ................................................................................................................... 15
3.2 Important Notice: Administrator rights .......................................................................................................... 15
3.3 Windows XP ® Embedded ............................................................................................................................... 15
3.4 Note for administrators................................................................................................................................... 16
3.4.1 User profile:............................................................................................................................................ 16
3.4.2 Driver installation files:........................................................................................................................... 16
3.4.3 Setup.exe file .......................................................................................................................................... 16
3.4.4 Sagem MorphoSmart™ USB Drivers.msi ................................................................................................ 16
3.4.5 USB driver deployment through a LAN .................................................................................................. 16
3.4.6 USB driver installation within a higher level software installation......................................................... 17
4. Finger Placement Rules .................................................................................................................................18
5. MorphoSmart™ MSO20x...............................................................................................................................19
5.1 Physical Characteristics ................................................................................................................................... 19
5.2 Safety instructions........................................................................................................................................... 19
5.3 General Description ........................................................................................................................................ 20
5.3.1 Top view ................................................................................................................................................. 20
5.3.2 Bottom view ........................................................................................................................................... 20
6. MorphoSmart™ MSO3xx...............................................................................................................................21
6.1 Physical Characteristics ................................................................................................................................... 21
6.2 General description ......................................................................................................................................... 22
6.2.1 Top view ................................................................................................................................................. 22
6.2.2 Bottom view ........................................................................................................................................... 22
7. MorphoSmart™ MSOxx1: with Fake Finger Detection...................................................................................23
7.1 MorphoSmart™ MSOxx1 devices .................................................................................................................... 23
7.2 Ground connection ......................................................................................................................................... 23
7.2.1 Important warning.................................................................................................................................. 23
7.2.2 MSO3x1 plugged though USB Hub ......................................................................................................... 23
7.3 Specific Cleaning Precautions.......................................................................................................................... 23
7.4 Specific recommendations .............................................................................................................................. 23
8. MorphoSmart™ MSO1300 ............................................................................................................................24
8.1 Physical Characteristics ................................................................................................................................... 24

MorphoSmart™ Fingerprint scanners Installation Guide
Table of Contents
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
6
8.2 General description ......................................................................................................................................... 24
8.2.1 3D view ................................................................................................................................................... 24
8.2.2 Bottom view ........................................................................................................................................... 25
9. MorphoSmart™ MSO1200 ............................................................................................................................26
9.1 Physical Characteristics ................................................................................................................................... 26
9.2 General description ......................................................................................................................................... 26
9.2.1 3D view ................................................................................................................................................... 26
9.2.2 Bottom view ........................................................................................................................................... 27
10. MorphoSmart™ MSO1350 ............................................................................................................................28
10.1 Physical Characteristics ................................................................................................................................... 28
10.2 General description ......................................................................................................................................... 29
10.2.1 Top view and Side view .......................................................................................................................... 29
10.2.2 Bottom view ........................................................................................................................................... 29
11. MorphoSmart™ device Technical Characteristics ..........................................................................................30
11.1 Physicals characteristics .................................................................................................................................. 30
11.1.1 Dimensions and Weight.......................................................................................................................... 30
11.1.2 Temperature range and humidity .......................................................................................................... 30
11.1.3 IP rating .................................................................................................................................................. 30
11.1.4 USB connection (All USB MorphoSmart™ devices) ................................................................................ 31
11.1.5 RS232 connection (MSO20x and MSO1200) .......................................................................................... 31
11.1.6 MorphoSmart™ terminals with Smart Card readers .............................................................................. 31
11.1.7 Power Supply.......................................................................................................................................... 31
11.2 Biometric characteristics................................................................................................................................. 32
11.2.1 Database size .......................................................................................................................................... 32
11.2.2 Database fulfill time ............................................................................................................................... 32
11.2.3 Verify performances ............................................................................................................................... 32
11.2.4 Identify performances ............................................................................................................................ 33
12. Man Machine Interface.................................................................................................................................34
12.1 MSO2xx/MSO3xx Man Machine Interface...................................................................................................... 34
12.1.1 Description ............................................................................................................................................. 34
12.1.2 Biometric terminal status ....................................................................................................................... 34
12.1.3 Biometric process status ........................................................................................................................ 34
12.1.4 Smart card reader status ........................................................................................................................ 35
12.2 MSO13x0 Man Machine Interface .................................................................................................................. 36
12.2.1 Description ............................................................................................................................................. 36
12.2.2 Biometric terminal status ....................................................................................................................... 36
12.2.3 Biometric request status ........................................................................................................................ 36
12.2.4 Smart card reader status (MSO1350) ..................................................................................................... 37
13. Secure MorphoSmart™ getting started .........................................................................................................38
13.1 Description ...................................................................................................................................................... 38
13.2 Installation....................................................................................................................................................... 38
13.3 Reference ........................................................................................................................................................ 38
14. Recommendations ........................................................................................................................................39
14.1 Warning........................................................................................................................................................... 39
14.2 Cable bend radius............................................................................................................................................ 39
14.3 Areas containing combustibles ....................................................................................................................... 39
14.4 Repair .............................................................................................................................................................. 39
14.5 Accessories ...................................................................................................................................................... 40
14.6 Environment conditions .................................................................................................................................. 40

MorphoSmart™ Fingerprint scanners Installation Guide
Table of Contents
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
7
14.7 Cleaning precautions....................................................................................................................................... 40
15. FCC Standard.................................................................................................................................................41
16. Bibliography..................................................................................................................................................42
16.1 General information about MSO product family ............................................................................................ 42
16.2 Integration of MorphoSmart™ EOM modules ................................................................................................ 42
16.3 Installation of MorphoSmart™ desktop terminals .......................................................................................... 42
16.4 ILV Protocol, description of low levels commands.......................................................................................... 42
16.5 MorphoSmart™ SDK........................................................................................................................................ 42
17. Contacts ........................................................................................................................................................43
17.1 Customer service............................................................................................................................................. 43
17.2 Hotline and Customer assistance.................................................................................................................... 43

MorphoSmart™ Fingerprint scanners Installation Guide
List of figures
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
8
List of figures
Figure 1: Finger placement recommendations..................................................................................18
Figure 2: MorphoSmart™ MSO20x 3D view ......................................................................................19
Figure 3: MorphoSmart™ MSO20x top view .....................................................................................20
Figure 4: MorphoSmart™ MSO20x bottom view...............................................................................20
Figure 5: MorphoSmart™ MSO300 3D View......................................................................................21
Figure 6: MorphoSmart™ MSO350 3D View......................................................................................21
Figure 7: MorphoSmart™ MSO3xx Top View.....................................................................................22
Figure 8: MorphoSmart™ MSO3xx Bottom View ..............................................................................22
Figure 9: MorphoSmart™ MSO1300 (from 2014)..............................................................................24
Figure 10: MorphoSmart™ MSO1300 3D view ..................................................................................24
Figure 11: MorphoSmart™ MSO1300 Bottom view ..........................................................................25
Figure 12: MorphoSmart™ MSO1200................................................................................................26
Figure 13: MorphoSmart™ MSO1200 3D view ..................................................................................26
Figure 14: MorphoSmart™ MSO1200 Bottom view ..........................................................................27
Figure 15: MorphoSmart™ MSO1350 (from 2014)............................................................................28
Figure 16: MorphoSmart™ MSO1350 top view and side view ..........................................................29
Figure 17: MorphoSmart™ MSO1350 bottom view ..........................................................................29
Figure 18: MorphoSmart™ S unlocking with KMS application ..........................................................38
Figure 19: MorphoSmart™ cable radius recommendation ...............................................................39

MorphoSmart™ Fingerprint scanners Installation Guide
List of tables
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
9
List of tables
Table 1: MorphoSmart™ devices, weight and sizes...........................................................................30
Table 2: MorphoSmart™ devices, temperature and humidity range................................................30
Table 3: MorphoSmart™ devices, IP rating........................................................................................30
Table 4: Database size........................................................................................................................32
Table 5: Database fulfill time .............................................................................................................32
Table 6: Identify performances..........................................................................................................33
Table 7: MSO20x/MSO3xx status ......................................................................................................34
Table 8: MSO20x/MSO3xx biometric process status.........................................................................35
Table 9: MSO35x smart card request status......................................................................................35
Table 10: MSO13x0 system status .....................................................................................................36
Table 11: MSO13x0 biometric process status ...................................................................................36
Table 12: MSO1350 smart card request status .................................................................................37

MorphoSmart™ Fingerprint scanners Installation Guide
Overview
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
10
1.Overview
1.1 Welcome to MorphoSmart™
Congratulations for choosing the MorphoSmart™ Automatic Fingerprint Recognition
Terminal. MorphoSmart™ terminal provides an innovative and effective solution for
applications using Fingerprint Verification or/and Identification.
Among the many biometric sciences, the use of finger imaging has significant advantages.
Each finger is a unique physical signature developed before birth and is preserved until
death.
The MorphoSmart™ terminal integrates Morpho image processing and features matching
algorithms (MorphoSoft™ and MorphoImaging™). This technology is based on lessons
learned during more than 20 years of experience in the field of biometric identification
and the processing of literally millions of individual fingerprint identification records.
We believe you will find the MorphoSmart™ terminal fast, accurate, and easy to use as a
biometric peripheral.
The MorphoSmart™ terminal offers the following advantages:
high quality optical scanner,
software development suite (MorphoSmart™ SDK) for all MorphoSmart™ devices,
Key Management System (MorphoSmart™ KMS) for Secure MorphoSmart™ terminal,
False Finger detection (only available with MorphoSmart™ MSOxx1),
PC/SC Smart Card Reader (only available with MorphoSmart™ MSO35x and MSO1350),
compact size for easy installation and integration into your available office space,
intuitive interface that is easy to use in both setup and operational modes.
The terminal complies with both European and U.S. standards as follows:
Europe: Morpho hereby declares that the MorphoSmart™ has been tested and found
compliant with the below listed standards as required by the EMC Directive 89/336/EEC:
EN55022 (1994) / EN55024 (1998) and by the low voltage Directive 73/23/EEC amended
by 93/68/EEC: EN60950 (2000).
USA: please refer to FCC Standard section.
To ensure the most effective use of your MorphoSmart™ device, we recommend that you
read this Installation Guide entirely.
1.2 Contents
The present document describes the MorphoSmart™ packaged devices, and how to install
it on a Window™ PC.
For information about MorphoSmart™ OEM versions, please refer to the documents
listed below:
MorphoSmart™ Module Integration (reference : SSE-0000080364)
MorphoSmart™ CBM Module Integration (reference : SSE-0000077475)

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ terminal installation
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
11
2.MorphoSmart™ terminal installation
2.1 Safety instructions
The MorphoSmart™ terminal is intended for indoor use only.
The MorphoSmart™ terminal must be placed on a flat clear surface where it will not be at
risk of coming in contact with fluids.
2.2 MorphoSmart™ Hardware Platform Compatibility
The MorphoSmart™ USB devices are compatible with usual PC configurations, but we
therefore strongly advise you to perform a compatibility test with target PC hardware
configuration.
The MorphoSmart™ USB devices are compatible with most of the self-powered USB hub
available. But we also recommend performing a compatibility test with target USB Hub.
Please note that USB hub powered only by the USB port, could provide not enough power
supply for a normal function of MorphoSmart™ USB devices.

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ terminal installation
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
12
2.3 Host system is a Windows™ PC
2.3.1 Installation of a MorphoSmart™ USB device (MSO3xx, MSO13x0)
The installation of a MorphoSmart™ USB device is performed in a few steps:
Install the MorphoSmart™ USB driver on the PC (please refer to MorphoSmart™ USB
driver installation section)
Connect the USB connector of the MorphoSmart™ USB device to a USB port of the PC.
Wait for USB enumeration process (usually not more than a few seconds).
Then the device is ready for use, for example: with the sample applications delivered with
MorphoSmart™ SDK (please refer to MorphoSmart™ SDK section).
2.3.2 Installation a MorphoSmart™ RS232 terminal (MSO20x)
The installation of a MorphoSmart™ RS232 device is performed in a few steps :
Connect the power supply connector to the socket on top of the RS232 connector.
Connect the power supply to an outlet.
Then connect the RS232 connector to one of the RS232 port of the PC.
Then the device is ready for use, for example: with the sample applications delivered with
MorphoSmart™ SDK (please refer to MorphoSmart™ SDK section).
2.3.3 MorphoSmart™ SDK
The MorphoSmart™ Software Development Kit provides the required elements to enable
you to develop your own applications for MorphoSmart™ devices. It is a usually delivered
on a CDROM which contains:
all the documentation required for MorphoSmart™ devices use and integration,
the MorphoSmart™ USB driver for Windows™ PC,
sample applications which enables to demonstrate the MorphoSmart™ functions
source files of sample applications
libraries (dll) and ActiveX with MorphoSmart™ device functions
To evaluate a MorphoSmart™ device we recommend installing the MorphoSmart
Software Development Kit on a Windows™ PC:
insert the MorphoSmart™ SDK CD-ROM into the drive,
if the installation process doesn’t start automatically, double click on the Setup.exe file
to start it,
install MorphoSmart™ USB driver before connecting a MorphoSmart™ USB device,
connect the MorphoSmart™ device to a USB port, or to a RS232 port (MSO20x only),
run MSO_Login.exe or MSO_Demo.exe sample application,
select the MorphoSmart™ device to use,
try MorphoSmart™ device functions.

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ terminal installation
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
13
For more information on the MorphoSmart™ Software Development Kit, please refer to
the MorphoSmart™ SDK Programmer Guide document.

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ terminal installation
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
14
2.4 Host system is not a Windows™ PC
2.4.1 RS232 connection
The MorphoSmart™ MSO200 can be physically connected to other host than Windows™
PC, but the ‘MorphoSmart™ communication protocol over RS232’ must be developed for
the host system.
The ‘MorphoSmart™ communication protocol over RS232’, is described in the
MorphoSmart™ Host System Interface specificationsdocument.
A sample of development of this protocol, with C language source files, is provided with
the MorphoSmart™ SDK package (MSO ILV_Sample project).
2.4.2 USB connection
A MorphoSmart™ USB device can be physically connected to other host than Windows™
PC, but the ‘MorphoSmart™ communication protocol over USB’ and a compatible USB
driver must be developed for the host system.
The integrated USB driver of the MorphoSmartterminal emulates a RS232 serial port.
The MorphoSmartterminal is processed as a Communication Device Class (CDC), in
accordance with the "USB Device Class Specifications, version 1.1" available from the
www.usb.org web site, in "developers, documents" section.
The device may also be used with a USB2.0 controller, but will still use the USB 1.1 full
speed transfer rate (12 Mbits/s).
The ‘MorphoSmart™ communication protocol over USB’, is described in the
MorphoSmart™ Host System Interface specification document.

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ USB driver installation
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
15
3.MorphoSmart™ USB driver installation
3.1 MorphoSmart™ USB driver setup
The MorphoSmart™ USB driver can be installed from MorphoSmart™ SDK, when it is
installed.
For MorphoSmart™ SDK V4.0.3.0 (and later versions), the USB driver installation installs
and starts the "SAGEM MorphoSmart Service Provider Usb Server" too.
Start the MorphoSmart™ USB driver installation from the MorphoSmart™ SDK
PROGRAMS folders in the windows start menu:
START / PROGRAMS / MorphoSmart SDK / PC / Drivers / Install (Desinstall) the USB driver for
MorphoSmart
Use the Next and Back buttons to navigate through the wizard.
Plug the MorphoSmart™ USB device to an available USB port on your PC with the
supplied USB cord.
3.2 Important Notice: Administrator rights
MorphoSmart™USB devices are currently compatible with Windows 2000 SP4, Windows
XP Professional Edition SP3 and Windows Server 2003 Enterprise.
Administrator rights on your local computer are required when plugging the
MorphoSmart™ USB device for the first time.
3.3 Windows XP ® Embedded
If you are using Windows XP ® Embedded, the automatic installer based on MSI won’t
work, since MSI is not installed on this platform. You will need to make the installation in
a manual way.
First uncompress the .cab file situated in START / PROGRAMS / MorphoSmart SDK / PC /
Drivers to another directory.
Then, register the driver. To do this, simply plug a MSO device. In the new hardware
dialog box, simply point to the directory where you uncompressed the .cab file.
The next step is to register the service.
Copy the service file Serv_SpUsb.exe from the uncompressed .cab directory to the
C:\Windows\System32 directory.
Execute the two following commands:
sc create MSO_SpUsb_Service
binPath="C:\WINDOWS\System32\Serv_SpUsb.exe" type=own
start=auto error=ignore DisplayName="SAGEM MorphoSmart
Service Provider Usb Server" tag=no
sc start MSO_SpUsb_Service ( equivalent to the command net start
"SAGEM MorphoSmart Service Provider Usb Server" )

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ USB driver installation
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
16
3.4 Note for administrators
3.4.1 User profile:
To be able to execute the driver installation, on a Window™ computer, it is mandatory to
have the administrator rights.
The driver installation is, in fact, reduced to the registering of the ‘inf’ file.
3.4.2 Driver installation files:
The driver installation directory contains three files:
a Setup.exe file
a data1.cab file
a MorphoSmart™ USB Drivers.msi file
It is not intended to pack these files in a higher level installation setup. But customers are
allowed to include these files in their own higher level installation package.
3.4.3 Setup.exe file
The only role of the Setup.exe file is to install, if not already installed, the required version
of the Microsoft™ Installer engine (MsiEngine). Then the Setup.exe file is useless, if the
latest version of the MSIEngine is already installed on the PC.
3.4.4 Sagem MorphoSmart™ USB Drivers.msi
The .msi file can be executed directly by the command line below:
MsiExec /package "Sagem MorpoSmart USB Drivers.msi"
The MsiExec.exe supports several other options, such the one which enables to run the
installation package (msi file) without any interaction with the user. Please refer to the
MsiExec help, with the command line below:
MsiExec ?
3.4.5 USB driver deployment through a LAN
This software structure (three files) enables the automatic installation of the MSO USB
driver on several Windows computers through a local area network.
This kind of software deployment is performed using the ActiveDirectory™ technology
and the GPO feature (Group Policies Object™) available on a Windows Server ™
computer.
The installation using GPO feature is automatic in administrator mode.
Please refer to Microsoft™ online help for further information.

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ USB driver installation
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
17
3.4.6 USB driver installation within a higher level software installation
When only individual installation is required, it is possible to include the .msi and the .cab
files in a higher level software installer. The typical use of this kind of installer is to install
one or several software applications, documentation set, and the USB driver.
The execution of the higher level installer should copy these two files (msi and cab) in a
directory, and then run the MsiEngine with the msi file, using the MsiExec command and
the required options.

MorphoSmart™ Fingerprint scanners Installation Guide
Finger Placement Rules
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
18
4.Finger Placement Rules
MorphoSmart™ biometric performance is increased when the finger is optimally
positioned.
Common non-optimal finger positioning is illustrated below, followed by an illustration of
best finger placement.
Fingerprint Placement
Fingerprint Orientation
Fingerprint Inclination
Fingerprint Rotation
Figure 1: Finger placement recommendations
Other recommendations for acquiring a quality finger image:
Fingers should neither be too moist nor extremely dry,
Exert firm, but not excessive, finger pressure on the surface of the sensor,
Once a finger is placed on the sensor keep the finger still until advised to move or
remove the finger from the sensor.

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ MSO20x
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
19
5.MorphoSmart™ MSO20x
5.1 Physical Characteristics
The MSO20x is dedicated to be connected to a RS232 port, and to an external power
supply.
Figure 2: MorphoSmart™ MSO20x 3D view
5.2 Safety instructions
Before plugging your MSO20x into a power source, check that the power source to which
you intend to connect it, complies with the voltage, current and frequency specifications
on the rating label of the power supply unit (depending on model).
Only use the power supply unit provided with your MorphoSmart™ terminal. Do not use
any other power supply.
The device does not have an on/off switch and can only be powered off and on by
unplugging and plugging the power source. For this reason the device should be
connected to an outlet that is easily accessible. The power outlet must be located within a
maximum of 8 feet of the terminal.
DB9 RS232 Connector
Sensor
Upper LED
Lower LED
Power connector

MorphoSmart™ Fingerprint scanners Installation Guide
MorphoSmart™ MSO20x
SSE-0000080361-05
May 2015
This document and the information therein are the property of Morpho. They must not be
copied or communicated to a third party without the prior authorization of Morpho
20
5.3 General Description
5.3.1 Top view
Figure 3: MorphoSmart™ MSO20x top view
5.3.2 Bottom view
Figure 4: MorphoSmart™ MSO20x bottom view
DB9 RS232 Connector
Sensor
Upper LED
Lower LED
Power connector
Stand
Product sticker
Module process
Metallic housing
Void sticker