Sage SPB550BAL2EEU1 User manual

the Boss To Go™
BPB550/SPB550
the User Guide
B###### / S######
EN USER GUIDE
FR GUIDE UTILISATEUR
IT MANUALE UTENTE
PT MANUAL DO UTILIZADOR
DE HANDBUCH
NL HANDLEIDING
ES GUÍA DEL USUARIO
PL INSTRUKCJA OBSŁUGI

2
SAGE®
RECOMMENDS
SAFETY FIRST
At Sage®we are very safety
conscious.We design and
manufacture consumer
products with the safety of
you, our valued customer,
foremost in mind. In addition
we ask that you exercise a
degree of care when using
any electrical appliance
and adhere to the following
precautions.
IMPORTANT
SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE
• A downloadable version of this
document is also available at
sageappliances.com
• Before using the rst time
ensure your electricity
supply is the same as
shown on the label on the
underside of the appliance.
• Remove and safely discard
any packaging materials
before rst use.
• To eliminate a choking hazard
for young children, safely
discard the protective cover
tted to the power plug.
• This appliance is for household
use only. Do not use the
appliance for anything other
than its intended use. Do not
use in moving vehicles or
boats.Do not use outdoors.
Misuse may cause injury.
• Fully unwind the power cord
before operating.
• Position the appliance on a
stable, heat resistant, level,
dry surface away from the
edge and do not operate on
or near a heat source such as
a hot plate, oven or gas hob.
Opening a pressurised
tumbler may lead to
ingredients splattering, or
may cause burning/scalding
if the contents are hot.
To minimise the risk of this
happening, always follow
the instructions below:
• Never blend hot or warm
ingredients. Stop the blending
process if contents become
hot due to blending.
Contents
2 Important Safeguards
6 Components
7 Assembly
7 Functions
8 Troubleshooting
9 Care & Cleaning
10 Guarantee

3
EN
• Never blend any ingredients for
more than 1 minute. Blending
for more than 1 minute may
cause the ingredients to
become hot and steam
may cause the tumbler to
become pressurised.
• Never attempt to unscrew
the blade from the base of
the tumbler when the tumbler
becomes pressurised due to
steam build-up. Allow tumbler to
cool to room temperature before
carefully unscrewing the blade.
• Never blend carbonated
liquid, detergent, or any
ingredient that could
expand or generate a gas.
• Never ll the tumbler beyond
the tumbler’s indicated
maximum capacity.
• If leakage occurs during
blending, immediately stop
blending and unplug the unit
from the power point. Check to
ensure that the tumbler is not
lled past the maximum level
and that there is no damage to
the seal or to the tumbler. Clean
up the leakage with a dry towel
and screw the tumbler rmly to
the blending mechanism before
resuming blending.
• Vibration during operation may
cause the appliance to move.
• Do not let the power cord hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.
• Always ensure the appliance
is turned OFF, unplugged at
the power outlet and has been
allowed to cool before cleaning,
attempting to move or storing.
• Always turn the appliance to
the o position, switch o at
the power outlet and unplug
at the power outlet when the
appliance is not in use.
• Do not use the appliance
if the power cord, plug,
or appliance becomes
damaged in any way.
If damaged or maintenance
other than cleaning is
required, please contact Sage
Customer Service or go to
sageappliances.com
• Any maintenance other
than cleaning should be
performed by an authorised
Sage®service centre
• Children should not play
with the appliance.
• Cleaning of the appliance
should not be carried out by
children unless they are 8 years
or older and supervised.
• The appliance and its cord
should be kept out of reach
of children aged 8 years
and younger.
• The installation of a residual
current safety switch is
recommended to provide
additional safety when using
all electrical appliances.

4
Safety switches with a rated
operating current not more
than 30mA are recommended.
Consult an electrician for
professional advice.
• Always ensure the appliance is
properly assembled before use.
The appliance will not operate
unless properly assembled.
• Do not use the appliance
on a sink drain board.
• Keep hands, ngers,
hair, clothing as well as
spatulas and other utensils
away from moving or rotating
parts during operation.
• Do not use the appliance
for anything other than food
and/or beverage preparation.
• In order to avoid the possible
hazard of the appliance starting
by itself due to inadvertent
resetting of the overload
protection, do not attach an
external switching device
(such as a timer) or connect
the appliance to a circuit
that can regularly switch the
appliance on and o.
• Carefully read all instructions
before operation and save for
future reference.
• The appliance can be used by
persons with reduced physical
or mental capabilities or a lack
of experience and knowledge,
only if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved.
• This appliance shall not be
used by children.
• Do not leave the appliance
unattended when in use.
• Allow the motor to rest for
1 minute between each use.
• Do not place any part
of the appliance in the
microwave oven.
• Be careful when handling and
cleaning blades, as they are
very sharp. Mishandling of
the blades may cause injury.
• Avoid putting the cup or jug
on the motor base while the
motor is still spinning.
• Do not operate without any
ingredients in the cup or jug.
• Never attempt to operate
with damaged blades, or
with utensils, or any foreign
objects inside the cup or jug.
• Do not put the cup or jug in
extremes of heat or cold, for
example placing a cold jug
into hot water, or vice versa.
• Blades must be rmly secured
to cup before operation to
ensure internal contents
do not escape or spray.
• Never attempt to operate
or place the blade assembly
onto the motor base without
the cup in place.

5
EN
SAVE THESE INSTRUCTIONS
• Do not ll the cup past the MAX
level marking as this will cause
the motor to strain under heavy
load and may cause potential
leakage. It will also reduce
blending performance. Note
that some mixtures increase in
volume when blending.
• A heavy load is dened as per
the appliance safety standard
specied load (500mL cup lled
to the maximum indicated level
with a mixture comprising two
parts by mass of soaked diced
carrots and 3 parts water).
Any load equivalent to this or
heavier should not be operated
for more than 10 seconds
at a time.Note that none of
the recipes supplied with this
product are considered heavier
than this load.
The symbol shown
indicates that this appliance
should not be disposed of
in normal household waste.
It should be taken to a local
authority waste collection centre
designated for this purpose or
to a dealer providing this service.
For more information, please
contact your local council oce.
To protect against electric
shock, do not immerse the
power plug, cord or appliance in
water or any liquid.

6
Components
A
B
C
D
F
E
F
A. Kinetix®blade and bowl assembly
B. Heavy duty metal coupling
C. Heavy duty 880W motor
D. Durable die-cast metal base
E. Portable lids
F. 2 Large 500ml Tritan®Tumblers
Rating Information
220–240V~ 50-60Hz 880W

7
EN
Assembly Functions
BEFORE FIRST USE
• Before using your blender for the rst time,
remove any packaging material and promotional
labels.
• Be careful when handling the blades as they
are extremely sharp.
• Wash the tumblers, lids, blade assembly and
attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly. All parts (except
motor base) may be washed in the dishwasher,
on the top shelf.
• When rst using your blender, you may notice
an odour coming from the motor.This is normal
and will dissipate with use.
ASSEMBLY
1. Remove blades and position the cup with
opening facing up.
2. Add ingredients avoiding lling past the
MAX line.
3. Fix the blade assembly in place with a quarter
turn in the clockwise direction. Ensure the blade
assembly collar is securely in place before
inverting the cup to blend.
OPERATION
• The blender will only work when the blades and
cup are correctly assembled.This engages the
safety interlock, and allows the motor to run.
• Do not blend continuously for more than
60 seconds at a time. Allow the motor to rest
for 2 minutes before continuing.
• Ingredients can be pulsed by rotating the cup
within the bayonet positions, which will turn the
motor on and o.
• When nished blending, wait a few seconds
for the blades to stop spinning before lifting
the cup assembly o the motor base.
• For safety, turn the motor base o at the wall
and unplug when nished blending.
Rating Information
220–240V~ 50-60Hz 880W

8
Troubleshooting
Motor doesn’t start or
blade doesn’t rotate • Check that the power plug is properly inserted into the power outlet.
• Overload Protection System may have operated (see below).
Blender stopped
suddenly while in use • This extractor has overload protection to prevent damage to the motor,
which may have operated. Unplug, remove the cup and allow the motor
to cool down for 30 minutes. Once cooled, you will be able to use
as usual again.
• We recommend blending in smaller batches, or cutting ingredients
into smaller pieces. See Overload Protection System section for
detailed information.
Food is lumpy or
unevenly blended • This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
• The ingredients may be too large.Try cutting into smaller pieces.
For best results, ingredients should be in pieces no larger than 2cm.
Food sticks to
blade and cup • The mixture may be too thick.Try adding more liquid and/or pulsing
the blender.

9
EN
Care & Cleaning
Dishwasher
The cups, lids and blade assembly may be
washed in the dishwasher on the top shelf only.
Citrus
Exposure to citrus oil may aect the clarity
and longevity of the Tritan cups. After washing
in detergent, rinse with plain water thoroughly,
and allow to dry immediately. Do not soak if citrus
has been blended. Do not attach blades when
washing with detergent.
Storage
Store upright with the cups and blades assembled
and resting on the motor base, or beside it.
Do not store with the cup turned to the ON position,
as this means the motor is engaged and will turn
on immediately when plugged in or switched on
at the wall.
Unplug the power cord from the power outlet after
use for safety reasons.
Tumbler cups and lids
To keep your cups and lids clean, avoid allowing
food residue to dry on them. Follow these steps as
soon as possible after use:
• Rinse most of the residue o the blades,
cup and lid.
• Hand wash in warm, soapy water using a mild
liquid detergent and non-abrasive sponge.
Motor base
To clean the motor base, wipe with a soft, damp
cloth then dry thoroughly. Wipe any excess food
particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleansers
on either the motor base or the cups, as they may
scratch the surface.Use only warm soap water
with a soft cloth.
Pressurisation
The cups may be rinsed by adding cold water,
attaching blades, and either blending or shaking
by hand for 10 seconds.
IMPORTANT:There is a risk of pressurisation
from hot water and/or detergent.
When rinsing by attaching blades and blending/
shaking, never add hot or even warm water,
as the steam produced can create dangerous
pressurisation.
Do not add detergent, as the foam produced
will expand and may cause pressurisation.

10
2 YEAR LIMITED GUARANTEE
Sage Appliances guarantees this product for
domestic use in specied territories for 2 years
from the date of purchase against defects caused
by faulty workmanship and materials.During this
guarantee period Sage Appliances will repair,
replace, or refund any defective product (at the
sole discretion of Sage Appliances).
All legal warranty rights under applicable national
legislation will be respected and will not be
impaired by our guarantee. For full terms and
conditions on the guarantee, as well as instructions
on how to make a claim, please visit
www.sageappliances.com.
Guarantee