Salto BLUEnet REPEATER03 Series User manual

SALTO BLUEnet Repeater
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2020 SALTO Systems S.L.
225871-ED. 28/04/2020
E
Installation guide
Guía de instalación
Eng
The SALTO BLUEnet Repeater is part of SALTO wireless
system. It extends the BLUEnet network range and
permits adding more connectivity acccesses. It works
as a bridge between SALTO's BLUEnet elements.
El BLUEnet Repeater ies parte del sistema wireless de
SALTO. Extiende el rango de la red BLUEnet y permite
añadir más puntos de acceso. Trabaja como puente
entre los dispositivos BLUEnet.
Electrical characteristic Características eléctricas
Eng
E
Operation conditions
Min Typ Max Unit
Temperature -20 25 70
ºC
Humidity 35 85
2400-2483.5Mhz
Bluetooth Low Energy
Frequency Range
RF Standard
10/15m Indoor Radio Range
SALTO BLUEnet Characteristics
Installation Instalación
Eng
E
Power Supply
100
Gateway architecture: number of repeaters + number of Nodes = 7.
Maximum of 3 repeaters connected in a row.
Number of bifurcation in node/repeater = 2.Number of locks per repeater = 16.
- It is recommended to avoid adding access points to the Gateway´s Node (Node 1/7) when
using BLUEnet Repeaters.
71228 V
mA
Imput Voltage
Current consumption
Min Typ Max Unit
PZ 1 TORX 10
REPEATER03 series
1/2
83
34
20
(13/16")
83 (3-1/4")
83
(3-1/4")
60
(2-3/8")
60
(2-3/8")
2083
Arquitectura Gateway: número de repeaters + número de nodos = 7.
Máximo de 3 repeaters conectados en línea.
Número de bifurcaciones en nodo/repeater=2. - Número de cerraduras por repeater= 16.
- Se recomienda no añadir puntos de acceso al Nodo del Gateway (Node 1/7) cuando se
utilizan Repeater BLUEnet.
1/16
1/16
1/16
1/16
1/16
1/16
1/16
Gateway
Node (1/7)
Repeater
(3/7)
Repeater
(2/7)
Repeater
(4/7)
Repeater
(7/7)
Repeater
(6/7)
Repeater
(5/7)
10-15m
SALTO KS
IQ2.0 architecture: number of repeaters + number of Nodes = 7.
Maximum of 3 repeaters connected in a row.
Number of bifurcation in node/repeater = 2.Number of locks per IQ2.0 = 16.
- It is not permitted to add BLUEnet locks to the IQ when using BLUEnet Repeaters.
Arquitectura IQ2.0:
número de repeaters + número de nodos = 7.
Máximo de 3 repeaters conectados en línea.
Número de bifurcaciones en nodo/repeater=2.Número de cerraduras por IQ2.0= 16.
- Prohibido añadir cerraduras BLUEnet al IQ cuando se utilizan Repeaters BLUEnet.
Condiciones ambientales
Min Tip Max Unidad
Temperatura -20 25 70
ºC
Humedad 35 85
2400-2483.5Mhz
Bluetooth Low Energy
Rango frecuencia
RF Estándar
10/15m Rango interior radio
Características SALTO BLUEnet
Fuente de alimentación
100
71228 V
mA
Tensión entrada
Consumo
Min Tip Max Unidad
Eng E
IQ2.0
Repeater
(1/6) Repeater (2/6)
Repeater
(3/6) Repeater
(4/6) Repeater (5/6)
Repeater
(6/6)
SALTO Space SALTO KS

SALTO BLUEnet Repeater
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2020 SALTO Systems S.L.
225871-ED. 28/04/2020
Electrical installation Instalación eléctrica
Eng
E
Installation example Ejemplo instalación
Eng
EE
CLEAR Button (Detach process):
- Press 3 seconds to change repeater to factory mode (Red LED).
- Delete the repeater from the software before the Detach process.
Botón CLEAR (proceso Detach):
- Pulsar 3 segundos para cambiar el repeater a modo fábrica (LED rojo).
- Borrar el repeater del software antes del proceso Detach.
Installation example Ejemplo instalación
Eng
E
RED - Factory mode: repeater is not configured.
BLUE - Connected/Link: repeater is configured and connected to his parent device.
ORANGE - Lost: repeater is configured and disconnected from the parent device.
ROJO - Modo fábrica: el repeater no está configurado.
AZUL - Conectado/Enlace: el repeater está configurado y conectado a su dispositivo padre.
NARANJA - Perdido: el repeater está configurado y desconectado de su dispositivo padre.
Operational test Test operacional
Eng
EE
Once the product is installed, follow these steps to check the correct operation:
- When SALTO Gateway and locks are installed, check that the repeater is active in SALTO's software.
Una vez instalada la unidad de control, para comprobar el correcto funcionamiento de la instalación, siga los siguiemtes pasos:
- Comprobar que al instalar el SALTO Gateway y las cerraduras, el repeater está activo en el software de SALTO.
E
Eng
E
Eng
E
Eng
2/2
16/16 2/16 1/16 1/16 2/16 16/16
1/16 2/16 16/16
1/16 2/16 16/16
Gateway
Node (1/7)
Repeater
(5/7)
Repeater
(6/7)
Repeater
(7/7)
Repeater (4/7)
16/16 2/16 1/16 16/16 2/16 1/16
BLUEnet connection
UTP cat5 RS485/12V
Repeater (2/7)
Repeater (3/7)