Salto IQ2.0 User manual

225452-ED2.-19/12/2022
All contents current at timeof publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2022 SALTO Systems S.L.
146
(5-3/4")
146
(5-3/4")
Eng
D
EInstallation guide
Guía de instalación
Montageanleitung
Guide d'installation
Guia de instalação
F
P
Installation Instalación Installation Installation Instalação
Eng
ED F P
1
ETHERNET + CELLULAR MODEL
a
2-a
Plug
Conectar
Verbinden
Branchez
Conectar
3-a
Plug
Conectar
Verbinden
Branchez
Conectar
4-a
Plug
Conectar
Verbinden
Branchez
Conectar
ETHERNET + WIFI MODEL
b
2-b
Plug
Conectar
Verbinden
Branchez
Conectar
Plug
Conectar
Verbinden
Branchez
Conectar
3-b
ETHERNET + CELLULAR MODEL ETHERNET + WIFI MODEL
ETHERNET + POE MODEL ETHERNET MODEL
a
c
b
d
1
2
1
2
1/4
( )Not included/ No incluido / Nicht enthalten/ Non inclus / Não incluso
*
*
*
Installation guide
IQ2.0
30
(1-316")
(x2) (x2)
PZ2
Not included/ No incluido
Nicht enthalten
Non inclus / Não incluso
SP225764

225452-ED2.-19/12/2022
All contents current at timeof publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2022 SALTO Systems S.L.
ETHERNET + POE MODEL
c
2-c
Plug
Conectar
Verbinden
Branchez
Conectar
3-c
Plug
Conectar
Verbinden
Branchez
Conectar
ETHERNET MODEL
d
2-d
Plug
Conectar
Verbinden
Branchez
Conectar
Plug
Conectar
Verbinden
Branchez
Conectar
4-d
Plug
Conectar
Verbinden
Branchez
Conectar
3-d
Installation guide
IQ2.0
2/4
SP225764
Not included / No incluido / Nicht enthalten / Non inclus
Não incluso
IQ 2.0 SUPPORT
45
101
TORX 20
For installations on metal surfaces
Para instalaciones sobre superficies metálicas
Für die Montage auf Metalloberflächen
Pour installations sur des surfaces métalliques
Para instalações em superfícies metálicas
TORX 20
SUPPORT
c

OTHER CHARACTERISTICS:
WIFI
IEEE 802.11 b/g/n radio
BLUEnet
Bluetooth 4.2 Compliant
Integrated antenna
TX power: up to +8dBm
RX sensitivity: down to -92dBm
Indoor range: 5m-10m
POE
The POE connection complies to IEEE 802.3af
(max 15.40W, also known as 802.3a Type 1)
225452-ED2.-19/12/2022
All contents current at timeof publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2022 SALTO Systems S.L.
1
Installation guide
IQ2.0
Eng
D
E
Electrical features
Características eléctricas
Electrische espezifikationen
Caracteristiques electriques
Características eléctricas
F
P
OPERATION CONDITIONS
Min Max Unit
Temperature 0 40
ºC
2.4 Ghz RF CHARACTERISTICS
Frequency Range 2405-2480 Mhz (ISM band)
RF Standard IEEE 802.15.4
Indoor Radio Range 7m*
POWER SUPPLY CHARACTERISTICS
(To be fed only by an official SALTO Power Supply adapter )
Unit
Input Voltage 12
V
Max Current 800
mA
To ensure a correct operation, do not install the device near a metallic surface.
Para asegurar un correcto funcionamiento, no instalar el dispositivo cerca de una superficie metálica.
Umeinen einwandfreien Betrieb zu gewährleisten, installieren Sie das Gerät dann nicht in der Nähe von einer
metallischen Oberfläche.
Pour assurer un fonctionnement correct, n’installez pas l’appareil près d’une surface métallique.
Para assegurar o funcionamento adequado, não instale o aparelho perto de uma superfície de metal
3/4
*
(*) Depending upon installed environment. (*) Depending upon installed environment.
(PoE + WiFi variant might suffer range reduction of up to 30%).

225452-ED2.-19/12/2022
All contents current at timeof publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
© 2022 SALTO Systems S.L.
LED Signals
IQ2.0
Blink long BLUE
Blink RED GREEN BLUE
Software reset
Factory reset
Blink short BLUE IQ2.0 firmware update
Not valid subscription found
Factory Mode
No connection to the cloud
Blink short GREEN (2 minutes)
Blink long PURPLE
Blink long GREEN
Blink short RED
BLE connection is established
Until BLE connection is established
4/4
LED COLOUR STATUS INDICATIONLED MODE
Blink BLUE twice Normal Power Up
BLUEnet information Información BLUEnet BLUEnet information
E
Eng
D F P
Signalling
Eng
The environment has a direct impact on the BLUEnet range radiation (metal, concrete walls...)
The receiver device must be located facing the product antenna. Please check your product's BLUEnet antenna position.
Recommended connectivity distance: 5m - 10m
El entorno tiene un impacto directo sobre el rango de radiación de BLUEnet (metal, paredes de hormigón...)
El dispositivo receptor debe ubicarse frente a la antena del producto. Compruebe la posición de la antena BLUEnet de su dispositivo.
Distancia de conectividad recomendada: 5m - 10m
Die Umgebung hat einen direkten Einfluss auf die Reichweite der BLUEnet Funkvernetzung (z.B. Metall, Betonwände etc.).
Das Empfangsgerät muss in Richtung der Produktantenne ausgerichtet sein. Bitte überprüfen Sie die Position der BLUEnet Antenne
Ihres Produkts. Empfohlener Abstand: 5 bis 10 Meter.
L’environnement a un impact direct sur le rayonnement de la gamme BLUEnet (métal, murs en béton …)
Le dispositif récepteur doit être placé face à l’antenne du produit. Veuillez vérifier la position de l’antenne BLUEnet du produit.
Distance de connectivité maximale : 5m – 10m
O ambiente tem um impacto direto na radiação da gama BLUEnet (metal, paredes de betão…)
O dispositivo recetor deve ser colocado de frente para a antena do produto. Por favor, verifique a posição da antena BLUEnet do
seu produto. Distância de conetividade recomendada: 5m – 10m
E
Eng
D
P
F