Saluki SFS-7000 Series User manual

SFS-7000 Series Optical Fiber Fusion Splicer
User Manual
Please read this Manual before operation
Please keep this Manual together with the fusion splicer for future
reference
Sept, 2020
Saluki Technology Inc.

Preface
Thank you very much for choosing the SFS-7000 Series Optical Fiber Fusion
Splicer produced by Saluki. The following manual will mainly introduce the
characteristics and instructions of fusion splicer. By adopting innovative design and
exquisite manufacturing technology, our product will give you excellent splicing
experience. Please read this Manual carefully for your convenience. We will do our
utmost to meet your needs, provide you with high quality measurement instruments,
as well as first-class after-sales service. With the principle of excellent quality and
courteous service, we will provide satisfactory products and service to the users. We
sincerely welcome your inquiry.

Location: No.367 Fuxing N Road, Taipei 105, Taiwan
+886. 909 602 109
[e-mail]
www.salukitec.com
This Manual introduces the applications, performance characteristics, basic
principles, method of operation and cautions etc., of the SFS-7000 Series Optical
Fiber Fusion Splicer, to help you get familiar with and master the operation method
of this device. Please read carefully and follow the instructions.
Owing to time constraints and the author’s limited knowledge, errors and omissions
of the Manual are inevitable. We implore every user to criticize and correct them!
We sincerely apologize for the trouble caused by our mistakes.

CONTENTS
Safety Instructions........................................................................................................... I
Warnings........................................................................................................................ III
Repair and Maintenance................................................................................................V
Chapter 1 Overview........................................................................................................1
Chapter 2 Technical Parameters................................................................................... 3
Chapter 3 Configuration................................................................................................6
Chapter 4 Basic Operation............................................................................................ 8
4.1 Appearance overview..................................................................................................8
4.2 Battery charging........................................................................................................10
4.3 Power on................................................................................................................... 11
4.4 Adjust the brightness of LCD backlight................................................................... 12
4.5 Fiber preparation steps..............................................................................................13
4.6 Automatic inspection of optical fiber....................................................................... 14

4.7 Splicing procedures.................................................................................................. 15
4.8 Magnification function of the screen........................................................................19
Chapter 5 Splicing Mode..............................................................................................21
5.1 Display of the current splicing mode........................................................................21
5.2 Selection of the splicing mode..................................................................................22
5.3 Parameter in general splicing....................................................................................23
Chapter 6 Splicing Options..........................................................................................27
Chapter 7 Heating Mode..............................................................................................30
7.1 Selection for heating mode....................................................................................... 30
7.2 Edit the heating mode............................................................................................... 32
7.3 Delete heating mode................................................................................................. 34
Chapter 8 System Maintenance...................................................................................36
8.1 Dust checking........................................................................................................... 36

8.2 ARC calibration........................................................................................................ 37
8.3 Electrode stabilize.....................................................................................................38
8.4 Electrode setting....................................................................................................... 39
Chapter 9 Other Functions and Applications............................................................ 41
9.1 Records storage.........................................................................................................41
9.2 System settings......................................................................................................... 42
Chapter 10 Operation Faults and Solutions...............................................................44
10.1 Excessive Splicing Loss and Solutions...................................................................44
10.2 Common error and solutions.................................................................................. 46
10.3 Common faults and solutions................................................................................. 48

I
Safety Instructions
The following safety instructions should be abided by during whole operation
process of SFS-7000 Series Optical Fiber Fusion Splicer (hereinafter referred as
“splicer” ). In case any of these safety instructions, warnings and precautions are not
strictly followed, the safety standards deployed by design, manufacture and
operation of the splicer will be violated. Saluki shall not be liable for any
consequential damages in connection with these violations！
Operation environment and power supply
Please refer to technical parameters defined in Chapter 2 for performing and storage
environments and operation power supply of the fusion splicer. Please ensure
matched power supply for the splicer before Power ON and all safety measures are
taken.

II
Do not use the splicer in a flammable and explosive environment
Do not use the splicer in an environment with explosive gas or smoke.
Do not disassemble any parts of the splicer without permission
Despite the parts allowed to be replaced by users in the Manual, any remaining parts
should not be disassembled without permission. Only SALUKI or authorized
engineers are eligible for parts replacement and internal adjustment.

III
Warnings
AC/DC power adapter
Only standard adapter from manufacture is allowed to use. Do not put heavy objects
on the power line, do not heat or change the cable. Improper or broken cable will
result in fire, electric shock and equipment damage, and may even cause fire, human
injury or death.
Built-in lithium-ion battery
The splicer contains a dedicated lithium-ion battery as other batteries will damage it
and threaten personal safety of users.
For the purpose of safety, do not disassemble the lithium-ion battery package to
prevent a short circuit. The battery will explode if it is shocked violently, gets close
to or is thrown into sources of fire or intensive heat.

IV
Operation of the fusion splicer
Turn the splicer off immediately and unplug the adapter from the power input port in
case the following conditions are seen:
Fluid or unknown matters enter the splicer;
The splicer suffers from severe shock and vibration.
No user serviceable parts inside. So do not dismantle it as any unqualified repair
may cause permanent destroy of the splicer and even personal injury.
During ARC discharge of the electrodes, voltage between the two electrode bars
reaches as high as thousands volt. Do not touch the electrodes to avoid damage to
the splicer and personal injury.

V
Repair and Maintenance
Over the warranty period, breakdowns of the splicer deserve free maintenance.
However, the following circumstances are not covered by the warranty.
Breakdowns or damages caused by force majeure, such as natural disasters.
Instrument damage or performance degradation caused by violation of the
Manual and mishandling.
Vulnerable parts, such as lithium batteries and electrodes, enjoy separate
warranty periods.
Repair of the splicer should be performed by SALUKI or authorized repair units.
Dismantling and repair by any other parties and personnel are illegal, and the
warranty becomes invalid. SALUKI retains the right to pursue legal actions
against any violators.
In case the splicer should be returned back to the factory thanks to repair or
maintenance needs, it should be put in the portable box and be transported in the
original package. Any damages caused by improper packing will not be covered

VI
by the warranty.
Remarks：
SALUKI reserves the rights to modify the design and structure of the splicer,
but not be liable for free improvement and replacement of the sold instruments.

1
Chapter 1 Overview
The Saluki SFS-7000 Series Optical Fiber Fusion Splicer is one core-to-core
alignment fusion splicer, by adopting innovation design and exquisite manufacturing
technology, it will give you unprecedented splicing experience.
SFS-7000 series uses German CNC technology and integrated fiber-adjust frame
which can make the fusion splicer more stable. Our new technology greatly shortens
the time for splicing and heating. Micron-level parallel clamping, high precision
alignment of the spindle, advanced DACAS technology ensure the accuracy of
estimation for splicing loss, exquisite design with strong solid protective shell can
adapt to in harsh environment. Touch screen application with fully automatic
splicing procedures will bring great convenience to users.
SFS-7000 series mainly used for the permanent splice of optical fibers, it is widely
applied in fiber communication projects and production test of passive optical
devices.

2
Please refer to Fig. 1-1 for the appearance of SFS-7000 Series Optical Fiber Fusion
Splicer.
Fig. 1-1 Appearance of SFS-7000 Series Optical Fiber Fusion Splicer

3
Chapter 2 Technical Parameters
Model
SFS-7000H
Applicable Fibers
SMF (ITU-T G.652), MMF (ITU-T G.651), DSF (ITU-T G.653),
NZDSF (ITU-T G.655), BIF (ITU-TG.657)
Typical Splice Loss
0.02dB (SMF), 0.01dB (MMF), 0.04dB (DSF), 0.04dB (NZDSF),
0.02dB (BIF)
Return Loss
≥ 60dB
Compatible Fiber
0.25mm – 3.0mm, Indoor cable
Splicing Time
6s (SM fast mode)
Splicing Mode
Preset 41 splicing modes, storable 100 modes
Heating Time
Fast heating time: 13s, Typical heating time: 30s
Heating Tank
Preset 5 kinds of thermal heating tube: 20/30/40/50/60mm, Maximum
100 modes

4
Estimated Splice Loss
Yes
Protection Sleeve
Length
20mm – 60mm
Results Storage
20000 records & 200 images
Tension Test
1.96N – 2.25N
Electrode Life
5000 ARCS
Display
5 inch color high resolution touch screen, 90° bi-directional view
Lighting
3 high-power white LEDs
Fiber View &
Magnification
X, Y, XY, X/Y & 520x magnification
Splicing & Heating
Times
340 times (100% battery charge)
Automatic Calibration
Automatic ARC calibration by air pressure and temperature
Operating Methods
Button or Touch screen

5
Terminal
USB, Mini USB 2.0
Power Supply
AC input 100-240V, DC input 12-15V
Battery Capacity
5200mAh
Weight
2.233kg (including battery), 1.853kg (excluding battery)
Dimension
140mm*170mm*176mm (including rubber bumper),
130mm*170mm*170mm (excluding rubber bumper)
Operating Condition
Altitude: 0-5000m above sea level; Temperature:-10 to 50°C;
Humidity: 0 to 95%RH, non-dew; Wind: 15m/s
Storage Condition
0 to 95%RH, -40 to 80°C; Battery storage: -20 to 30°C

6
Chapter 3 Configuration
Standard configuration of SFS-7000 Series Optical Fiber Fusion Splicer is listed in
Table 3-1.
Table 3-1 Standard package
No.
Name
Qty.
Remarks
1
SFS-7000H host
1 PC
Host
2
Fiber cleaver
1 PC
Accessory
3
Battery
1 PC
Accessory
4
Spare electrode
1 PAIR
Accessory
5
Power adapter
1 PC
Accessory
6
Power cable
1 PC
Accessory
7
Cooling tray
1 PC
Accessory
8
Carrying straps
1 PC
Accessory

7
9
Alcohol bottle
1 PC
Accessory
10
Cleaning brush
1 PC
Accessory
11
Fiber stripper
1 PC
Accessory
12
Cable stripper
1 PC
Accessory
13
Fiber cleaver tray
1 PC
Accessory
14
Carrying case
1 PC
Accessory

8
Chapter 4 Basic Operation
4.1 Appearance overview