Samsung NX24BG45411V Series User manual

NX24BG45411V**
NX24BG35411V**

Installation instructions Instructions
for use
Installation instructions
Safety precautions ........................................................................................3
Before installing ............................................................................................5
Applicance ................................................................................................5
Guideline forventilation .............................................................................7
Installation .....................................................................................................8
Electrlcal connection ..................................................................................
10
Gas connection ........................................................................................... 11
Converting the gas type .............................................................................14
Hotplate burners ......................................................................................14
Oven/Grill burner ......................................................................................15
General nozzle table ...............................................................................
18-42
2-17
7
EN-2

Safety precautions
Thismanual is valid for several models.
Variations in details for each cookerare possible.
The safe operation of this appliance can only be
guaranteed
if it has been professionally assembled
and installed in accordance with these instructions.
The individual who assembled and installed the
appliance is liable for damage
or faults resulting from
incorrect assembly
or installation.
All installation and adjustmentwork, as well
as the
conversion
to a differenttype of gas must be
undertaken by an authorised expertand carried out
in accordance with the currently applicable rules
and regulations
of the local gas and electricity
supplycompany.
Shut off the supply of electricity and gas before
carrying out anywork.
Before installing the appliance, checkthatthe local
conditions (type of gas and pressure) are compatible
with the appliance settings. The permissible
appliance settings can be found on the rating plate.
If an extractor hood is to be fitted, itmust be fitted
according to the associated assembly instructions.
Ensurethatthe hood is fitted at least 762 mm clear
of the hob.
EN-3

Safety precautions
Prior to installation, ensure that the local
distribution conditions (nature
of the gas and gas
pressure)
and the adjustment of the appliance are
compatible.
The adjustment conditions for this appliance are
stated
on the label (ordata plate).
This appliance is not connected to a combustion
products evacuation device. It shall be installed
and connected
in accordance with current
installation regulations. Particular attention shall
be given to the relevant requirements regarding
ventilation.
Hob guards cannot be used. The use of
inappropriate hob guards can cause accidents.
CAUTION: "The
use of a gas cooking appliance
results
in the production of heat, moisture and
products
of combustion" in the room in which it is
installed. Ensure that the kitchen
is well ventilated
especially when the appliance
is in useR: keep
natural ventilation holes open or install a
mechanical ventilation device (mechanical
extractor hood).
Prolonged intensive use
of the appliance may call
foradditional ventilation, for example opening ofa
window, or more effective ventilation, for example
increasing the level of mechanical ventilation
where present.
CAUTION: Accessible parts may
be hot when the
grill
is in use. Young children should be kept
away.
CAUTION: This appliance
is forcooking purposes
only. It must not
be used for other purposes, for
example room heating.
EN-4

Safety precautions
Please take note of the following information.
-
What kind of problem does the product have?
- Under what circumstances does the problem
occur?
Please have your product model name and
serial number ready before calling.
You may find this information on the rating
plate label.
- Model description
- S/N code (15 digits)
For quick and easy reference, we recommend
that you write down the product information
here or keep the additional label included
with appliance.
Keep the surroundings of the cooking
appliance free
of combustible materials,
fuel
or othervapors or flammable liquids.
Do not block the exhaust outlets
of
combustion gases ofthe oven or Roaster.
It shall not be used as calefaction heater.
In case of smelling gas:
-Open the windows.
-Do not operate the electrical switches.
-Turn offthe flames by closing the main
pass valve.
-Call immediately the Leakage
Suppression Service or your gassupplier.
EN-5

Before installing
Appliance
Unpacking
Appliance dimensions
Read the following information about the appliance
and the guidelines for ventilation.
Checkthe condition of the appliance afterunpacking
it. Do
not connectthe appliance ifit has been
damaged in transport.
Dispose of packaging in an environmentally-friendly
manner.
Note the specified dimensions.
EN-6
595 mm
900 mm（With feet）565 mm
20 mm
46 mm
559mm
6

1. leave at least 762mm between the top of the gas
range and any cabinet and or any other containers,
if the container is not directely on the top of the gas
range, the distance could be more than 457mm.
2. leave at least 20mm from the back side,left side
and right side of the oven to the cabinet or any other
containers.
3. The oven feet must be installed.
4. Please make sure not to block the oven gas exit,
including the funnel and the gas vents.
Gas Range installation
EN-7

Installation
• Installation of burner
1.Take the burners from the rack;
2.Remove the pan supports;
3 Place
the burners on the cooktop;
4.Place
the pan supports;
~·
Fitting the adjustable feet
Beforehand:
1.Remove all parts that are not permanently fixed, especially the pan supports and burners.
2.Remove the accessories from the oven.
Proceed as follows:
1.Tilt the appliance by raising one side slightly from the floor.
2.With the plates in position, screw the adjustable feet into the mounting holes on the
underneath of the appliance.
3.Repeat the process on the other side.
You can make the final adjustments to the feet in order to level the appliance once the
gas and electricity supply have been connected.
If it is necessary to pull the appliance, screw the adjustable feet in fully. Make the final
settings only when the other installation tasks have been completed.
EN-8

Left side
Front
1. Remove the oil pan from the oven accessory bag;
2. The short side of the oil pan is located in the front of the oven, put it down horizontally
(as shown below), cover the bake burner, and make sure there is no shaking around.
EN-9
(NX24BG45411V** ONLY)
* Installation of Back Guard (NX24BG35411V** ONLY)

Electrical connection
Onlya licensed expert mayconnectthe appliance.
The appliance must be installed according to the
most recent IEE regulations (Institute
of Electrical
Engineers).
The appliance could become damaged
if incorrectly
connected.
Make sure the voltage of the powersupply
correspondstothespecifiedvalue ontherating plate.
The rating plate can be found on the inside
of the
storage compartment flap.
Ensure thatthepowersupply is properly earthed and
that the fuse and thewiring and piping system in the
building can withstand the load from the appliance.
When you route the mains cable, makesure that:
• the cable is nottrapped
or squashed.
• the cable does not come into contact with sharp
edges
or cutting edges.
• the cable does not come into contact with parts
that can reach temperatures
of more than 50 °C
above room temperature.
EN-10

Gas connection
Gas connection on the
appliance
Defaultsetting
of the
burners
Connecting to liquefied gas
The appliance must be connected inaccordancewith
the currently applicable regulations.
Before installing
the appliance, check that the local
conditions (type
of gas and pressure) arecompatible
with the appliancesettings. The permissible
appliance settings can be found
on the rating plate.
Connection
to the gas lines and seal fitting must be
carried
out professionally according to the currently
applicable standards.
Connecting
pieces Description
LPG corrugated tube union
(and seal)
The burners are set up for G30 liquefied gas on
delivery.
A nozzle
set for G20natural gas issuppliedwith the
appliance.
If you connect the appliance to liquefied gas,
you
must always install a suitable gas pressure
regulator.
Use thetotal gas consumption of the appliancestated
on the rating plate
to select a suitable gas pressure
regulator.
Only use connecting lines or flexible hoses which
complywith theapplicable regulations andwhich
areapproved for this purpose.
EN-11

• Connection Type 1
Proceed as follows:
• Screwthe corrugated tube union (C) and the seal
(B) to the gas connection (A).
• Hold the corrugated tube union (C) in placewith a
spanner and screwthe connecting piece to a
flexible gas connecting hose (E).
• Tighten the clamp (D).
Only use approved sealing compound to seal the
thread.
• Connection Type 2 (Do not provided)
A combination of connectors must be used to connect the range to the existing
gas supply line. Your connection
may be different depending on the type of supply
line, size, and location.
1. Use the equipmentspecified in the figure below to connect the range:
Supply tubebuilt-In COupllng and C'.opper tube with Y.i"
tothe range Nipple of ~-NPT oonical washers thathasthe length
____ __...."4·· .... CT) ......... ····: ~~/: !a~:~th ~· required to reach the gas supply Gas reguir
~ ~ ~ n Stopcock t
~--···u-1_ 1
~ coupling and
NOTE: The equipment shown forthe installation is not provided withthe range. Nipple of W'NPT
NOTE: Your range may be equipped from thefactory with:
1.- Supply Tube or
2.- Gas Shut-ml' Valve
2. Once connected to the gas lines, TURN ON the gas to the appliance and check
that there is no leakage by pouring foam on the connections and bends
in the tubes.
3. Check that the copper tube is
not damaged or bent in such a way to block
the gas
to the range.
EN-12

Flexible hose
- - 0 0 -
- - - - - -<=> <::> <=> => <=> <::>
0 0
------
--
-- 00 --
- - ----
- -- -- -
0 0
------
x
Shut off valve
Checking
for leaks
Initial use
If you use flexible hoses, make sure that:
·the hoses do not become trapped or squashed.
• the hoses are
not subjectto twisting or pulling
forces.
• the hoses do not come into contact with sharp
edges
or cutting edges.
•the hoses do notcome into contactwith parts that
could reach a temperature higherthan 70 °C
above room temperature.
Ensurethatthefull length
of the hosesare accessible
for inspection.
The installation
of a safetyvalve for opening and
closing the
gas supply is a compulsory requirement.
Fit thesafety valve between the gas connecting line
to the appropriate room and the hob. Ensure
unhindered access
to this valve.
Afterconnecting the gas line, check the connections
for leaks using soapywater.
Switch the appliance on as described in the
instruction manual.
Lightall the burners andcheckthattheflames remain
stable
at both the high and lowsettings.
EN-13

Converting the gas type
Hotplate burners
Replacing the nozzles
If the appliance is not already set up for the existing
type
of gas, the appliance must be converted.
The conversion to a differenttype of gas must be
carried out by an authorised expertin accordance
with the applicable regulations.
The type
of gas and pressure that was preset at the
factory are indicated on the insert
of the instruction
manual.
In orderto convert to a differenttype
of gas, the
nozzles must be replaced and the low flame and
primary air
may have to be adjusted.
Proceed
as follows:
A
B
C
D
A
B
C
• Remove the pan supports.
• Remove the burner lids (A) and burner
sprayers (B) from the burners (C).
• Remove the nozzle (D) and replace it with an
appropriate nozzle for the new type of gas
(see section “General nozzle table”).
• Replace the gas label with the new label that
was supplied with the nozzle set.
• Place each burner sprayer (B) on the burner
(C).
• Position the relevant burner cap (A) exactly on
top of the cup.
• Refit the pan supports.
EN-14

Oven/Grill burner
Replacing the nozzles Proceed as follows:
Undo the screw on the front of the grill burner and
pull the burner downwards and towards the front
slightly.
Unscrew the nozzle and replace it with a nozzle
which is suitable for the new type of gas (see
"General nozzle table" section).
•Replace the gas label with the new label that was
supplied with the nozzle set.
•To reassemble, follow the instructions in the
order.
reverse
• Remove the removable floor of the oven at
the front and pulling the floor out upwards and
towards the front.
①
②
Oven burner
Replacing the nozzles
EN-15
①
①
②

Reassembling the burner To reassemble the burner, proceed in the opposite
order.
• Undo the screw on the front of the oven
burner and pull the burner downwards and
towards the front slightly.
• Unscrew the nozzle and replace it with a
nozzle which is suitable for the new type of
gas (see "General nozzle table" section).
• Replace the gas label with the new label that
was supplied with the nozzle set.
①
①
②
EN-16

Rapid burner (LF) 85 130 2.80 2.80
10 080 kJ/h 10 080 kJ/h
68 97 1.75 1.75 6 300 kJ/h 6 300 kJ/h
53 72 1.00 1.00 3 600 kJ/h 3 600 kJ/h
72 100 2.20 2.20 7 920 kJ/h 7 920 kJ/h
Semi-Rapid burner (LR,RR)
Auxiliary (RF)
EN-17
kW
NX24BG45411V**
NX24BG35411V**

25
20
32
34
36
Instructions for door care
19
38
EN-18
26
29
28
30
35
41
36
36
40
NX24BG45411V**
NX24BG45411V**
NX24BG45411V**
NX24BG35411V**
NX24BG35411V**
NX24BG35411V**

Important information
Transport damage
Connections
Read the instructions for use carefully.
This will enable you to operate yourappliance
safely and correctly.
This manual isvalid for several models.
Variations in details
for each cooker are possible.
Please keep the instruction manual, installation
instructions and the various accessories in a safe
place. Please pass on these manuals and
accessories to the new owner
if you sell the
appliance.
Check the appliance for damage afterunpacking it.
Do notconnectthe appliance
if it hasbeen damaged
in transport.
Have a licensed professional carry out the electric
and
gas connection and the conversion to a different
type
of gas.
Assembly instructions are supplied with the
appliance.
Any damage caused by the appliance being
incorrectly connected is not covered underthe
guarantee. We assume no liability for damage and
faults caused by connection and setting errors.
EN-19

Safety precautions
Hot surfaces
Overheated
oil and fat
This appliance is intended for domestic use only.
This appliance must only be used
for food
preparation.
Adults and children must not operate the appliance
without supervision if:
•they do not havethe physical or mental ability;
• or they lackthe knowledge and experience
required to operate the appliance safelyand
correctly.
Never letchildren playwith the appliance.
Neverdrag, push
or move the device once unpacked.
The appliance should be lifted and placed in the
position desired
in order to prevent accidental
damage to the floor.
Open the cover plate when the oven isworking.
Risk of burns.
Nevertouch the burners, the surfaces of thecooking
compartment, the heating elements
or the oven
steam outletswhen they are hot.
Children must be kept
at a safe distance from the
appliance
at all times.
Open the appliance door carefully. Hot steam may
escape.
If theburnersare in operation for a prolonged period,
the areas between them can become hot.
Risk of fire.
Never leave flammable objects on the hob or in the
storage compartment,
or keep them in the cooking
compartment.
Risk of short-circuit.
Nevertrap the mains cable of electrical appliances in
theappliancedoorwhen itis hot
or pull thecable over
burners when theyare hot. The cable insulation may
melt.
Risk of fire.
Overheated oil or fat can ignite very quickly.
Never leave fat
or oil to heatunattended. Should the
EN-20