Samsung DVD-P721M User manual

VIDEO
DVD PLAYER
DVD-P721M

ons ons
TO REDUCETHERISKOF ELECTRICSHOCK, DO NOT REMOVETHE
COVER(ORBACK).
NO USER-SERVlCEABLEPARTSAREINSIDE.REFERSERVlClNGTO
QUALIFIEDSERVICEPERSONNEL.
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the
product.
CAUTION: DVD PLAYERSUSE AN INVISIBLE LASER BEAM WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSUREIF DIRECTED,
BE SURE TO OPERATE PLAYERCORRECTLYAS INSTRUCTED.
CAUTIONS
Caution: To preventelectricshock,match wide bladeof plugtowide slot,fullyinsert.
Attention: Pour _viter les chocs _Iectriques, introdulre la lame la plus large de la fiche dans la borne correspondante
de la prise et pousserjusqu au fond,
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment, To prevent electromagnetic interference with electric appliances, such as radios and televisions,
use shielded cables and connectors for connections.
FCC NOTE (for U,S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1 S of
the FCC rules, These limits are designed to provide reasonable protection against harmful interference in a residential
installation, This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures,
• Reorient or relocate the receiving antenna,
• Increase the separation between the equipment and receiver,
• Connect this equipment into an outlet on a circuit different from thai to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for hetp.
This class B digital apparatus meets all requirements of the Canadian Interference -
Causing Equipment Regutations
WARNING
to reduce the risk of fire
or shock hazard, do not
expose this DVD player
to rain or moisture.
CAUTION
THISPRODUCTUTILIZESA LASER.USEOF CONTROLSOR ADJUSTMENTS
OR PERFORMANCEOF PROCEDURESOTHERTHAN THOSESPECIFIED
HEREINMAY RESULTIN HAZARDOUSRADIATIONEXPOSURE,DO NOT
OPENCOVERAND DO NOTREPAIRYOURSELF.REFERSERVICINGTO
QUALIFIEDPERSONNEL.
Note:
• This unit can be used only where the power supply is AC 12OV, 60Hz, It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
• This device is protected by U.S, patent numbers 4,631,603, 4,577,216, 4,819,098 and 4,907,093
and other intellectual property rights, The use of Macrovision's copy protection technology in the
device must be authorized by Macrovision and is intended for home and other limited pay-per-view
uses only, unless otherwise authorized in writing by Macrovision.
Reverse engineering or disassembly is prohibited.
, Before connecting other components to this player, be sure to turn them all off.
, Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player's
internal parts may be damaged.
, Do not put a flower vase filled with water or any small metal obJeCtson the player.
, Be careful not to put your hand into the disc tray.
, Do not place anything other than the disc in the disc tray,
, Exterior interference such as lightning and static electricity can affect normal operation of this player, If this
occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet, The player will operate normally.
, Be sure to remove the disc and turn off the player after use,
, Disconnect the AC power cord from the AC outlet when you don't intend to use the player for long
periods of time,
, Clean the disc by wiping in a straight line from the inside to the outside of the disc_
Be careful not 1o harm the disc because the data on these discs is highly vulnerable 1o the environment,
, Do not keep under direct sunlight.
, Keep in a cool ventilated area,
, Store vertically,
, Keep in a clean protec[ionjackeh
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
, Do not use benzene, thinner, or other solvents for cleaning.
, Wipe the cabinet with a soft cloth,
2 3

nstruct ons
1. Read Instructions-All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions-The safety and operating instructions should be retained for future reference.
3. Heed Wamings-Nt warnings on the product and inthe operating instructions should be adhered to.
4. Follow instructions-All operating and using instructions should befollowed.
5. Cleaning-Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6. Attachments-Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. Water and Moisture-Do not use this product near water-for example near a bath tub, wash bowl, kitchen
sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8. Accessories-Do not place this product on an unstable cart, stand, tripod, bracket,
or table.
The product may fall, causing serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with the product.Any mounting of the product shoutd follow
the manufacturer's instructions and should use a mounting accessory recommended
by the manufacturer.
9. Cart Usage-A product and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product and cart combination to overturn.
10. Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating. These openings must not be biocked or covered.
The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack unmessproper
ventilation is provided or the manufacturer's instructions have been adhered to.
11.Power Sources-This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
12. Grounding or Polarization-This product may be equipped with a polarized altemafing-current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unabIe to insert the plug fully into the outlet, try reversing the plug. Ifthe plug
should still fail to fit,contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13. Power-Cord Protection-Power-supply cords should be routed sothat they are not likety to bewalked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14. Lightning-For added protection for this product during a lightning storm or when it is left unattended and
unused for long pehods of time, unplug itfrom the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and power-line surges.
4
15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
16. Overloading-Do not overload wall out_ets,extension cords, or integrai convenience receptacles as this can
result in a risk of fire or electric shock.
17. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or shorf-out parfs that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18. Servicing-Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to quamifiedservice
personnel under the following conditions:
a When the power-supply cord or plug is damaged.
b If liquid has been spilled or objects have fallen into the product.
c If the product has been exposed to rain or water.
d Ifthe product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product
to its normal operation.
e Ifthe product has been dropped or damaged in any way.
f When the product exhibits a distinct change in performancerthis indicates a needfor service.
20. Replacement Parts-When replacement parts are required, be surethe service technician has used
replacement parts specified by the manufacturer or that have the same characteristics asthe original part.
Unauthorized substitutions may resutt in fire, electric shock, or other hazards.
21. Safety check-Upon completion of any service or repairs tothis product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
22. Heat-The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
5

Remote Control
(AH59+OOOO3V) Easy Remote Control (AH59-01043A)
User'sManuat
(AK68+00015W)
Batteriesfor
RemoteControls(AA Size)
(4301+000117)
Video/Audio Cable
(AC39+42001R)
Open the battery cover on the
back of the remote.
Insert two AA batteries, Make
sure that the polarities (+ and -)
are aligned correctly,
Replace the battery cover.
• Check the polarity + - of the batteries
(Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by
obstacles.
• Check if there is any fluorescent
lighting nearby.
6
General Features ............................................................................................ 8
Disc Type and Characteristics .......................................................................... 9
Description-Front Panel .................................................................................. 10
Description-Rear Panel .................................................................................. 11
Tour of the Remote Controi .............................................................................. 12
Choosing a Connection .................................................................................. 14
Playing a Disc................................................................................................ 16
Using the Search & Skip Functions ............................................................ 1B
Using the Display Function.............................................................................. 19
Repeat Play .................................................................................................. 20
Program Play & Random Play ........................................................................ 21
S.FITPlay ...................................................................................................... 22
Selecting the Audio Language ........................................................................ 23
Selecting the Subtitle Language ...................................................................... 24
Changing the Camera Angle .......................................................................... 25
Using the Instant Replay Function .................................................................... 26
Using the Bookmark Function .......................................................................... 27
Using the Zoom & 3D Sound Functions ............................................................ 28
MP3 Play ...................................................................................................... 29
Memory Stick ................................................................................................ 31
DAM (Digital Audio Manager) Piayback .............................................................. 35
Memory Stick Pull out .................................................................................... 36
DPM (Digital Photo Manager) Playback .......................................................................... 37
Slide Show .................................................................................................... 38
Slide Show Order .......................................................................................... 39
Photo View .................................................................................................... 40
Edit Photo ...................................................................................................... 41
Using the Setup Menu .................................................................................. 42
Setting Up the Language Features .................................................................. 43
Setting Up the Parental Control ...................................................................... 45
Setting Up the Audio ...................................................................................... 46
Setting Up the Display .................................................................................. 47
Controlling a TV with the Remote .................................................................. 48
Troubleshooting .............................................................................................. 49
Specifications ................................................................................................ 50
Warranty ...................................................................................................... 51

Excellent Sound
Dolby Digital, a technology
developed by Dolby Laboratories provides
crystal clear sound reproduction.
Screen
Both regular and widescreen(16:9) pictures
can be viewed.
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order.
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various
languages(Audio/Subtitle) and screen
angles while enjoying movies.
Memory Stick
"Memory Stick" is a new compact, portable
and versatile }C (}ntegrated Circuit) recording
medium with a data capacity that exceedsa
floppy disk.
Repeat
You can repeat a song or movie simply by
pressing the REPEATbutton.
MP3
Thisunit canplay discscreatedfrom MP3files.
Instant Replay
This function is used to replay the previous 10
seconds of the movie from the current position.
Progressive Scan
Progressive scanning creates an improved
picture with double the scan lines of a
conventional interlaced picture.
Easy Remocon
The Easy Remocon combines
frequently used functions for easier
operation.
Discswhich cannot be played with thisplayer:
• DVD-ROM • DVD-RAM
• CD-ROM • CDV
• CDI • SVCD,CVD
• HDlayer of super Audio CD
• CDGs pIay audio only, not graphics.
Ability to play back may depend on recording
conditions:
• DVD-R • CD-RW
• DVD+RW,-RW • PictureCD
• Many DVD discs are encoded with copy protection, Because of this, you should only connect your DVD player
directly to your TV, not to a VCR, Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
• This product incorporates copyright protection technology that is protected by methods ciaims of certain U,S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protecbon technology must be authorized by Macrovision Corporation, and is intended for home
and other Hmited viewing uses only unless otherwise authorized by Macrovision Corporation, Reverse engineering
or disassembly is prohibited.
ype and :haracter cs
This DVD player is capable of playing the following types of discs with the
corresponding Iogos:
Audio
Video
VIDEO
SingIe-sided
5" 240 rain.
Double-sided
480 rain.
Single-sided
31_2" 80 min.
Double-sided
160 rain.
• DVD contains excellent sound
and wdeo due [o Dolby Digi[a_
and MPEG-2 system.
• Various screen and audio
functions can be eastty
selected th_oogh the on-
screen menu.
quaIity & MPEG-1
compressiontechnology.
AUDIO-CD • CD s recorded as a
5 74 rain. Digital Signal with better
audio quality, less
[_o_ distortion and less
deterioration of audio
DIQITALAUDIO quahty over time,
•Play
Region
Number
IIsTEREOIIII II
. NTSC broadcast • Dolby • Stereo disc • Digital • DTS disc . MP3 disc • MEMORY
_YaStemin U.S,A,
nada, Korea, Digital disc Audio disc STICK
Japan, etc.
Both the DVD player and the discs are coded by region, These regional codes must match in order for the disc
to pJay. ]f the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player,

ront ,I
1 2 3 4 5 6 7 89101112
1 STANDBY /ON
• When the uRit is first plugged in, the iRdicatof lights
When STANDBY/ON is pressed on again, the light
goes out and the player is turned on
2 HEADPHONES JACK
• You can attach headphones here for private listening
3 HEADPHONES VOLUME
• Use to adjust headphones volume [eve1
4 DISC TRAY
• Load the disc here
5 DISPLAY
• Operation indicators are displayed here
6 MEMORY STICK
7OPEN/CLOSE
• Press to open and dose the disc tray
8 SCREEN Ff[
9 PLAY/PAUSE
• Begin or pause disc play
10 SKIP/SEARCH
11 SFOP
• Stops disc play
12 JOG/SHUTTLE
• Shultle(outerdial)- Use during DVD and DD playto fast
forward or reve{se
•Jog(inner dial} - Use for flame advance/CD track
selectian
2 5 6 7 8 9 10
+
1 _
I I I I I
3 4 14 1312
11
1. Angle indicator, Youcan selectmultiple angles
of a scene recordedby different cameras.
2. Disctype indicators
3, Reverseplay /Pause/Forwardplay
4, Lightswhen 3D surround isturned on,
5, DVD : Titlenumber
6, DVD : Chapter number.
7, Video/Audio CD : Tracknumber
8. Repeatplay mode
10
9. Linear PCM audio output
10, Dolby Digital Disc
11, DTS(Digital TheaterSystem)output
12, MPEG-2Audio output
13, MP3 indicators
14, Dispiaysvarious messagesconcerning operations
suchas PLAY,STOP,LOAD, RANDOM....
no DISC: No disc loaded,
OPEN: Thedisc tray isopen.
LOAD: Playeris loading disc information.
2 3 4 5 6
2,
3.
DIGITALAUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
• Connectto the Audio inputjacks of your television, audio/video receiver,or VCR,
VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
• The VIDEO OUT SELECTswitch must be set to the 5251(4800 position,
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S_Videojack on your television for a higher quality picture,
• The VIDEO OUT SELECTswitch must be set to the 5251(4801) position.
COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks, These jacks provide Pr, Pb and Y
video, Along with S-Video, Component Video provides the best picture quality.
• If 525P(480P) VIDEO is selected, progressive scan mode will work.
• If 525t(4800 VIDEO is selected, interlaced scan mode will work.
VIDEO OUTSELECTSWIFCH
• Usethe switch to setvideo ouh
, If 525P(48OP)VIDEO isselected,VIDEO and S VIDEOwill not work.
'Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual's instructions regarding
Progressive Scan settings in the TV's menu system,
,If 525P(48OP) VIDEO OUT is Selected, VIDEO and S-VIDEO will not work.
11

our oq
15
1€
30
31
32
(Easy Remote Control)
1, DVD POWERButton
2, NUMBERButtons
3, STEPButton
4. VOLUMEButtons
5, TV/VIDEO Button
6, ZOOM Button
7, B.Fff Button (ScreenPit)
8, SEARCHButtons
•Allowsyoutosearchforward/backwardthroughadisc
g, STOPButton
10. RETURNButton
• Returnstoa previousmenu
11. SETUPButton
• Bringsupthe DVDplayer'sSetupmenu
12, SUBTITLEButton
13. ANGLE Button
• Use1oaccessvariouscameraang&_sonaDVD
14. MENU Button
• BringsuptheDiscmenu
15. CLEARButton
• Usetoremovemenusor statusdisp{aysfromthe
screen
16. SLOW Button
17. TV POWER Button
18.3D Button
19. OPEN/CLOSE Button
20. CHANNEL Buttons
21. M STICK Button (Memory Stick)
22. PLAY/PAUSE Button
•Begin/Pause discplay
23. SKIP Buttons
• Use to skip the title, chapter, or track
24. BOOKMARK Button
25. DISPLAY Button
• Displays the current disc mode
26. AUDIO Button
• UsethisbuttontoaccessvariousaudioJunctionsona disc
27. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Button)
• This button functions as a toggle switch
28. TOP MENU Button
• Takesyou to the menu on the DVD disc
• When pressing the TOP MENU button with a
CD; the unit enters the INTRO mode INTRO lets
you listen to the beginning of each track for
about 10 seconds
29. REPEATButton
• Allows you to repeat play a title, chapter, track,
or disc
30. MODE Button
• Allows you to program a specihc order
31. REPEATA-B Button
• Useto mark a segmentto repeat between A and B
32. I.REPLAY Button
• Thisfuncbonisusedto replaythe previous10 seconds
of themoviefrom thecurrentposition
12 13

ra on :hoosing a qon
The following show examples of connections commonly used to connect the DVD player with a
TV and other components, a TVt
IV (NormalWidescreen,ProJection,etc.)
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables,
• Refer to the owner's manual of the additional components you are
connecting for more information on those particuiar components.
to an
2oh Ampl#ier
Audio Input Jacks
X
Analog Audio Out
Dolby Digital Decoder
Digital Audio input Jack
OR
Digital Audio Out
Basic Audio Good picture Better picture Best picture Optimum picture
Cable S-Video
Cable
OR
IVkdeoCable5
OR
Audio Output Jacks Video Output Jack S-Video Jack Component Video Jacks
• Method 1
• Method 2
• Method 3
• Method 4
DVD Player + TV with Video Input Jack
(The VIDEO OUT SELECT switch must be set to the 5251(48OI) position.)
DVD Player + TV with S Video input Jack
(The VIDEO OUT SELECT switch must be set to the 5251(48OI) position.)
DVD Player + TV with Component Video Jacks
(The VIDEO OUT SELECT switch must be set to the 5251(48OI) position.)
DVD Player + TV with Progressive Scan Jacks.
(The VIDEO OUT SELECT switch must be set to the 525P(480P) position),
• if 525P(480P) VIDEO OUT is Selected, VIDEO and S-VIDEO will not work,
• Depending on your TV, your hookup for Method 4 may differ from the illustration,
®. ®, ®.
Consult your TV User's Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
supported, follow the PV User's ManuaPs instructions regarding Progressive Scan settings in the PV's
menu system.
14 15

aymg a sc aymg a sc
• Turnon your TVand presstheTV/VIDEO button to selectthe video mode.
• Turnon your Audio Systemand selectAUX, CDor DVD.
After plugging in the player, the first time you press the DVD POWER
button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
Step Motion Play (Except CD)
When theJOG DIAL isturned, you can view framesone byone.
Pressthe STEPbutton on the remoteduring play,
- Eachtime thebutton is pressed,a new frame will appear.
- No soundis heard during STEPmode.
- PressPLAY/PAUSEtoresume normal play.
(Youcan onty perform stepmotion play in theforward direction.)
Slow Motion Play (Except CD)
Pressthe FWD SEARCHor REVSEARCHbuttononthe remote during PAUSEor STEPmode,
- By pressingthe FWD SEARCHor REVSEARCHbutton, you can selectslow motion play for
1/8, 1/4 or 1/2 of normalspeed.
- No soundis heard during slow mode,
- PressPLAY/PAUSEto resumenormal play.
- When playing a VCD, the reverseslow motion play will notwork.
Press the OPEN/CLOSE button.
TheSTANDBYindicator light goesout and the tray opens,
Place a disc gently into the tray with the disc's label
facing up.
Pressthe PLAY/PAUSE button or OPEN/CLOSE button
to close the disc tray,
4
5
6
Stopping Play
Pressthe STOPbutton during play,
Removing Disc
PresstheOPEN/CLOSEbutton.
Pausing Play
Pressthe PLAY/PAUSEor STEPbutton on the remoteduring play.
Screenstops,nosound.
- to resumeagain, pressPLAY/PAUSEbutton once again.
16
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up
where you left off. (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.)
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen saver
will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY button to resume
normal play,
• This Q icon indicates an invalid button press.
17

s,ng the: & ons s,ng the splay on
During play, you can search quickly through a chapter or track or use the skip
function tojump to the next selection.
a Cha[
1During play, press the FWD SEARCH (I_') or
REVSEARCH (<,11)button on the remote.
• Press the REVERSEor FORWARD SEARCH button on the remote and press again
to search at a faster speed on the DVD, VCD, CD.
DVD 2X, 4X, 8X, 16X, 32X, 128XVCD/CD 2X, 4X, 8X
• Depending on the disc, audio may not be heard when a disc is in 2X play mode,
During play, press the DISPLAYbutton
on the remote.
- Current title, chapter number, elapsed time,
Audio, Subtitle, Angle, Repeat and BD control will
be displayed.
• Use the NUMBER buttons to enter a different title,
then press the ENTER button,
• Use the LEFT/RIGHT or NUMBER buttons to enter
a chapter number, then press the ENTER button.
• To enter the time from which you want to start,
use the UP/DOWN buttons to select, then use the
NUMBER buttons to enter the time,
Then press the ENTER button,
• Use the LEFT/RIGHT butions to change the values of
the current audio, subtitle, Angle, Repeat and 3D.
• To make the screen disappeah press the DISPLAY
button again.
18
1Duringplay, pressthe NEXTSKIP(1_'1)or
BACKSKIP(HI<)button.
, When playing a DVD, if you press the NEXT SKIP button, it moves to the
next chapter. If you press the BACK SKIP button, it moves to the beginning
of the chapter.
One more press makes it move to the beginning of the previous chapter.
, When playing a VCD 2.0 in MENU OPF mode, a VCD 1,1 or a CD, if
you press the NEXT SKIP button, it moves to the next track,
If you press the BACK SKIP button, it moves to the beginning of the track,
One more press makes it move to the beginning of the previous track•
, If a track exceeds 15 minutes when playing a VCD and you press the NEXT
SKIP button, it moves forward 5 minutes•
If you pressthe BACK SKIP button, it moves backward 5 minutes•
I During play, press the DISPLAYbutton on
the remote.
- Current track number, elapsed time, Audio, Repeat
and BD control will be displayed.
• Use the UP/DOWN buttons to select a track. Use
the [EPT/RIGHT buttons or NUMBER buttons to
enter a different track number, then press the
ENTER button,
• To enter the time from which you want to start, use
the UP/DOWN buttons to select, then use the
NUMBER buttons to enter the time,
Press the ENTER button.
• Use the LEFT/RiGHT butions to change the values of the
current audio, Repeat and 3D,
- To make the screen disappear, press the DISPLAY
button again.
* In VCD 2,0 mode (MENU ON mode), onty the
volume control will appear on screen.
What is a Chapter?
Each Title on a DVD is usually divided into
chapters (similar to tracks or_ ar_ audio CD).
What is a Title?
A DVD may contain several different titles.
For example, if a disc contains four different
movies, each might be considered a title.
19

peat y 'rogram lay& 'lay
Repeat the current track, chapter, title, achosen section (A-B), or all of the disc.
Pressthe REPEATbutton on the remote. Repeat
screen appears.
Select Title, Chapter or using the LEFT/RIGHT
buttons.
PressENTER.
Toreturnto normal play, pressREPEATagain,
then presstheLEFT/RIGHTbuttonsto selectOff
and pressENTER.
* REPEATA-B button
, Press the REPEAT(A-B) button to select the point where the
function starts, (A)
, Press the REPEAT(A-B) button to select the point where the
function ends, (B)
, To terminate the function, press the 'CLEAR' button or the
'REPEAT (A-B)' button again. Then press play to resume
normal playback,
, A-B REPEATdoes not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set,
DVD
VCD/CD
R_oea[ A.B
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track,
See page 29 to MP3 disc repeat Play,
• Depending on the disc, the Repeat function may not work.
• If the titie or track is completed before marking the end (B), the end of title or track becomes B automabcally.
• When in VCD 2,0 mode (MENU ON mode), this function does not work.
Play
Pressthe MODE button.
pfog am on,el
Use the LEFT/RIGHT buttons to select PROGRAM. o..........
Pressthe ENTERbutton, o_ 14o11 _ :: :: :. 1:
Use the UP/DOWN/LEFT/RIGHT buttons to select
the first chapter (or track) to add to the program.
Press the ENTER button. The selection numbers
appear in the Program Order box.
Pressthe PLAY/PAUSE button. The disc will be
played in programmed order.
Pressthe MODE button.
Use the LFT/RIGHT buttons to select RANDOM.
Pressthe ENTERbutton.
The disc will be played in random order.
i iii
_i,i!
ih
• Depending on the disc, the Program and Random P{ay function may not work.
• When in VCD 2.0 mode (MENU ON mode), these functions do not work.
• [o resume normal play, press the CLEAR button.
20 21

ay ng the guage
You can select a desired language quickly and easily with the AUDIO button.
1During play, press S.FITbutton on remote
control.
- Allows you to eliminate the black bars in the top and bottom
of the £c[_ft,
- Screen Fit will not work when the Zoom mode is active.
(you can not remove the black bars on the screen)
However, Zoom mode will work when Screen Fit is active.
Pressthe AUDIO button.
Use the LEFT/RIGHT buttons to select the
desired language on a DVD.
- The audio languages are represented by
abbreviations,
Use the LEFT/RIGHT buttons to select
Stereo, Right or Left. (On VCD/CD)
DVD
VCD/CD
• Various aspect ratios are available only in multiple screen format discs.
• This function does not work when a DVD has been recorded in a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due to their aspect ratio.
,This function depends on what languages are encoded on the disc and may not work with all DVDs,
, A DVD disc can contain up to 8 audio languages,
' How to have the same audio language come up whenever you play a DVD;
Refer to *'Setting Up the Language Features" on page 44.
22 23

ng the e ,hang,ng the q,ngle
You can select a desired subtitle quickly and easily with the SUBTITLEbutton. When a DVD contains multiple angles of a particular scene, you can select the Angle function.
Press the SUBTITLE button.
Use the LEFT/RIGHT buttons to select the
desired subtitle language.
Use the UP/DOWN buttons to determine
whether or not the subtitle will be displayed.
- Initially, the subtitJingwill not appear on screen,
- ThesubUtielanguagesare representedby abbreviations,
Press the ANGLE button to see if an ANGLE ( _ )
mark is present at the upper right hand corner of
the screen,
1When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner of
the screen.
Use the LEFT/RIGHT buttons to select the
desired screen angle.
Toturn off the display, press the ANGLE
button again.
i%
_ __ _ ...,_,_t,_t,_t,_t,_
• This function depends on what languages are encoded on the disc and may not work with all DVDs,
• ADVDdisccancontainupto32subtitJelanguages.
• How to have the samesubtitle language come up whenever you play a DVD;
Refer to '*Setting Up the Language Features" on page 44,
24 25

s,ng the nstant play on s,ng the irk on
The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you
can quickly find the section at a later time.
If you miss a scene, you can see it again using this
function.
I If you press the I.REPLAYbutton, the current
scenemoves backward about I0 seconds,
and plays back.
Depending on the disc, the Instant Replay function
may not work.
i!
ii I _ii
i_i_t_............................. i ii iii___i_i_iiiiiiiII
I During play, press the BOOKMARK button on the
remote. TheBookmark iconswill be displayed. [_] _0oKma_
Use the LEFT/RIGHTbuttons to move to the
desired bookmark icon.
311
4
When you reach the sceneyou want to mark,
pressthe ENTERbutton. Theicon will change to
a number (1, 2, or 3).
Pressthe BOOKMARK button to turn off the
display.
I During play, press the BOOKMARK button on
the remote.
Use the LEFT/RIGHT buttons to select a
marked scene.
Pressthe PLAY/PAUSE buttons to skip to the
marked scene.
During play, press the BOOKMARK button
on the remote.
Use the LEFT/RIGHT buttons to select the
bookmark number you want to delete.
Pressthe CLEARbutton to deletea bookmark
number. Pressthe BOOKMARK button to turn
off display.
, Up to three scenes may be
marked at a time.
, When in VCD 2.O mode (MENU
ON mode), this function does not
work.
, Depending on the disc, the
Bookmark function may not work.
26 27

s,ng the oom & 3 ons qay
During play or pause mode, press the
ZOOM button on the remote.
A square will be displayed on screen.
Use the UP/DOWN or LEFT/RIGHT
buttons to select the part of the screen you
want to zoom in on.
Press the ENTER button.
- During DVDplay, pressENTERto zoom in
2X/4X/2X/Normal in order,
DuringVCD play,pressENTERto zoom in
2X/norrnal in order.
3D
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTSwill ......
not work. When the DIGITAL OUTPUT is set to BIT
STREAMin the SETUPMENU, the 3D Sound
function will not work.) [NOTE _
1During play, pressthe 3D button.
The 3D SOUND mark will be displayed on
screen. (Be sure the DIGITAL OUTPUT is setto
PCM)
Pressthe UP/DOWN buttons to turn the 3D
Sound feature on or off.
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND or
DOLBY DIGITAL. Howevefl some of
these discs do not contain rear channel
sound signals,
• Depending on the disc, the Zoom and
3D Sound function may not work,
28
When an MP3 Disc is inserted into the DVD PLAYER,the first song file of the first Directory plays.
1Toreturned playback of the first song file, then press
RETURNto display the music files menu on the right
side of the screen, the music Directory menu on left
side of the Screen. Up to 10 music Directories can be
displayed at a time. Ifyou have more than 10
Directories on a disc, press the LEFT/RIGHTbuttons to
bring them up on the screen.
Use the UP/DOWN buttons to select the desired music
Directory, the press ENTER. Use the UP/DOWN
buttons again to select a song file. PressENTERto
begin playback of the song file.
Pressthe MODE button, then the UP/DOWN buttons, to
switch between the RANDOM and PROGRAM modes.
See page 21 for more information
on these modes.
•Press the REPEATbutton to hear a song file repeatedly.
Press Repeat again to release the Repeat mode,
• Depending on the disc, the Program and Random Play function may not work.
•Toresumenormalplay.presstheCLEARbutton.
• ItdoesnotworkSETUPMENUin CD-R(MP3).
29

iemory:
When piaying CD-R MP3 discs, please follow the recommendations below:
• Your MP3 files should be iSO 9660 or JOLIET format,
ISO 9660 format and Joliet MP3 files are compatible with MicrosofEs DOS and Windows, and with Apple's
Mac. These two formats are the most widely used.
• When naming your MP3 files do not exceed 8 characters, and place ",mp3" as the file extension,
General name format of: Title,rap3, When composing your title, make sure that you use 8 characters or
less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,-,+),
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files,
Sound quality with MP3 files basically depends on the rate of compression/decompression you choose,
Getting audio CD quality sound requires an analog/digital sampling rate (conversion to MP3 format) of at
least 128 Kbps and up to 160 Kbps. However, choosing higher rates, I{ke 192 Kbps or more, only rarely
give better sound quality.
Conversely, files with sampling rates below t26 Kbps will not be played properly,
• Do not try recording copyright protected MP3 files,
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are of the
following types: Windows Media _u (registered trade mark of Microsoft [nc) and SDMITM (registered trade
mark of The SDM[ Foundation), You cannot copy such flies.
• Your DVD player only accepts one level of file directory,
Consequently you must choose:
-either to save all your MP3 recording files at the root of the disc;
and/or create folders in the directory for each artist or music type (e,g,classical, rock, jazz, etc)
• Important: The above recommendations cannot be taken as a guarantee that the 0V0 player will play MP3
recordings, or as an assurance of sound quality,
You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent optimal
playback of these files on your DVD player (degraded sound quality and in some cases, inability of the
player to read the files).
"Memory Stick" is a new compact, portable and versatile IC (Integrated Circuit) recording
medium with a data capacity that exceeds a floppy disk.
"Memory Stick" is specially designed for digital data exchange among "Memory Stick"
compatible devices.
Because it is removable, the "Memory Stick" can also be used for external data storage.
There are two types of "Memory Sticks".
One is the regular "Memory Stick" and the other is the "MagicGate Memory Stick"
equipped with "MagicGate" copyright protection technology.
"MagicGate" is a copyright protection technology that uses encryption.
1. MagicGate MemoryStick
Can be usedfor bothcopyright-protectedand regular data.
2. Memory Stick
Can be used for regular data only.
MagicGate Memory Sticks with copyright-protected data
cannot be used in this unit.
30 31

emory: k lemory :k
handling
1. Data can becomecon'uptedin thefollowing instances:
- When the "Memory Stick"istaken out or the power isturned off while usingthe DPM(Digital
PhotoManager) or DAM (DigitalAudio Manager) function.
- When usingthe "Memory Stick" in a location subjectto static electricityor electricnoise.
2. Memory stickscan only be read in this unit, not written.
3. Do not attachany other materialthan the suppliedlabel on the label space.
4. Attachthe label so that it doesnot stickout from the proper attachmentlocation.
5. When moving or storing the "Memory Stick",usethe storagecase.
6. Do not touchthe "Memory Stick"connectorwith your finger or metallicobjects.
7. Do not bend, drop or apply strongshockto the "Memory Stick."
8. Do not disassembleor modify the "Memory Stick."
9. Do not allow the "Memory Stick"to get wet.
1. If it is not fully inserted, until you hear an audible "click", the "Memory Stick" will
not work.
2. If you inadvertently remove the "Memory Stick" or turn off the power while using
the DPM (Digital Photo Manager) or DAM (Digital Audio Manager) function, the
recorded data may become corrupted.
3. To remove the "Memory Stick" during operation, see page 36.
1. Do not format the "Memory Stick" using your computer. If you format the "Memory
Stick" using the computer, you cannot use it with "Memory Stick"compatible
devices.
2. If you need to format the "Memory Stick," use a "Memory Stick" compatible device
(If formatted, all data previously recorded on the "Memory Stick" will be erased.)
3. If you use a "Memory Stick" that has been initialized using a computer or initialize
a "Memory Stick" attached to a camera using USBconnection, further operation is
not guaranteed.
4. Be careful not to optimize the "Memory Stick" from a computer running a
Windows operating system.The life of the "Memory Stick" will be shortened.
5. Do not compress the data recorded on the "Memory Stick." A compressed file
cannot be played back on this unit.
1. Depending on the type of application software used, the file size of a still image may
become larger when it is opened.
2. Depending on the type of application software used, only the first frame (thumbnail)
of the clip motion file may be displayed.
3. An image file that has been modified using an image processing software may not
open if it is converted into a different file format to play back with this product.
32 33

emory: :k anag yback
Item DPM (Digital Photo Manager)
File Format JPEG Image (*.jpg)
File Size
Compatibility
34
Main
Functions
1. All files in JPEGformat that
have less than 1600 x 1200
resolution can be played back
with DPM.
(JPEGfiles smaller than 1.5MB
can be viewed with PhotoView.)
2. For JPEGdata without
thumbnail information, "Thumbnail
not available" will be displayed in
TheThumbnail View, however,they
can stillbe played back inPhoto
View.
1. Stillimagefileswith ". pg"
extensionthat havebeenrecorded
with a digital camcorder or digital
stillcameraequipped with Memory
Stickfunctions
2. JPEGimaje files storedin
Memory ,tickusinga Memory
Stickada ttorfor PC
3. JPEGimage files storedin
CD-R/RWusing CDWriter on PC,
haveto be storedusing one of
directory formals as follows
(Capitalizeall lettersof directory
name):
1) \DCIM\<dir>\,. pg
2 \PREVIEWS\<dir>\,.jpg
3) \lMAGES\<dir>\,.jpg
4) \,.jpg
Thesizeofeach<dir> cannotbe
over50MB. [ case1), 2),3) ]
Incaseofstoringfilesin root
directory[ case:4)],thesizeof root
directoryalsocannotbeover50MB.
Directories Supported
•Memory Stick DPM
•-DCIM_<dir>\*'JPg
Picture CD DPM
KCompatible with Picture CD of
odak, Fuji, Qse (Noritus), and
Konica)
DAM (Digital Audio Manager)
MP3 Music File (*.mp3)
- No limit to file size
All files in MP3 format that have
been downloaded from a PC or PDA
to Memory Stick (,.mp3)
MP3 music files recorded on Memory
Stickcan be played back.
However, although non-MP3 files are
also displayed on DAM, they cannot
be played back.
PressStop if in play mode.
Pressthe M.STICK button on the remote and the screen
to the right will appear.
Insert the Memory Stick encoded with MP3 files into
the Memory Stick Slot.
Pressthe UP/DOWN buttons on the remote control to
select Digital Audio Manager, and then press the
ENTERbutton.
•Your selection is highlighted with yellow borders.
Use the UP/DOWN buttons to select the desired song.
6Pressthe ENTERbutton to start play.
• Pressthe MENU button to return to the Start menu.
- If the PLAYbutton is pressedduring the playback of an
MP3 file, the song will startfrom the beginning again.
- If the SKIPbutton is pressed during the playback of an
MP3 file,the next song will be played.
1. FOLDER UP: Use to move "up" a folder when
you have multiple folders. _"'_"_
2. PLAYLIST:Showsthe playlist. 1,....
2....
3. INFO: Shows information about the 3,..
Selected song being played. 4,,..
4. EXIT:Takesyou to the Start menu.
5. Shows brief information about the selected
song, ?,_u ; _t_m
6. The title of the song currently playing
7. Shows a list of MP3 files and folders found
in the memory stick.
8. Shows the title and playback time of the curreotlyplaying song in the scroll box.
• If the REPEATbutton is pressed, the following displays will appear:
- O : If the REPEATbutton is pressed, all MP3 files in a given folder will be played
back repeatedly in the order they are listed under that folder.
- _ : If the REPEATbutton is pressed once again, the Shuffle function is activated.
(All MP3 songs in a list are played once in random order.)
- _) : If the REPEATbutton is pressed yet once again, the Continuous Shuffle function
is activated. (All MP3 songs in a list are played in random order.)
- If the REPEATbutton is pressed still yet once again, the Repeat function is
deactivated. 35

emory: lull Out Photo anager yback
1 'fusingDPM (Digital Photo Manager)or DAM (Digital
Audio Manager), move to Exit, and then press the
ENTERbutton to exit to Start Menu.
Move to the "STOP MEMORY STICK" function at the
bottom of the menu and then press the ENTER button.
When the "PLEASEREMOVE MEMORY STICK" message
appears on the top of the menu, remove the Memory
Stick.
W.E_IA_10_l_ _ _[I _Bn )*IUDEf_l
PBOlO10f zB[_R H_/H/I| 0_111AM
If the above sequence is not followed and the Memory _ _ll_'_We_
Stick is inadvertently removed or the power is turned off, PLEASEM&KEASELECTION
the data recorded on the Memory Stick may become
corrupted.
(Memory
1 PressStopifinplaymode.
Pressthe M.STICK button on the remote and the
screen to the right will appear.
1
31
4
6
Insert the Memory Stick/Photo CD containing JPEGfiles
into the Memory StickSlot.
Pressthe UP/DOWN buttons on the remote control to
select DIGITAL PHOTO MANAGER, and then press the
ENTERbutton.
•Your selection is highlighted with yellow borders.
PEG files in the Memory Stick/Photo CD will be
displayed on the screen in the order of their recording.
Use the UP/DOWN/LEFT/RIGHT buttons to selectthe
image you want, and then pressthe ENTERbutton to
display it in full view on the TV screen, or use the UP/
DOWN/LEFT/RIGHT buttons to select SLIDESHOW,
and then press the ENTERbutton to begin the slide show.
Slides will be displayed in order for a few seconds at a
time.
5
The Auto Power Off function does not work while any DPM
function is active.
1. EXIT:Takesyou to the Start menu.
2. SLIDESHOW : Begins the slide show.
3. PAGE : Highlight the PAGE menu item and use LEFT/RIGHT buttons to move to the next
page of thumbnails.
4. ROLL:Allows navigation when there are multiple directories below '/DCIM'
of Memory Stick. (See page 34)
5. Photo Information.
36 37

;how ' ;how ! |rder
Use the LEFT/RIGHTbuttons on the remote control to
select Slide Show.
• Your selection is highlighted with yellow borders.
Pressthe ENTERbutton and the Slide Show will begin.
• To execute any function or option, be sure to press
the ENTERbutton after selecting the menu item you
want.
• If there is no input for 5 seconds, the Slide Show
menu will disappear, and the slide show will begin.
• To view the Slide Show menu, press the UP/DOWN/
LEFT/RIGHT button on the remote control. The slide
show will stop and the menu will be displayed.
• Select the PLAY menu item to resume.
UsetheLEFT/RIGHTbuttonsto selectSlideShowand
pressENTER.
UsetheLEFT/RIGHTbuttonsto selectSetOrder and
pressENTER.
Use the UP/DOWN/LEFT/RIGHT buttons on the
remote control to select the image you want to move,
and then press the ENTERbutton.
• Your selection is highlighted with yellow borders.
Use the UP/DOWN/LEFT/RIGHT buttons on the
remote control to select the location you want to move
the image to, and then press the ENTERbutton.
• Source location is indicated with yellow borders.
Destination location is indicated with green borders.
After moving the images to another location, you can
begin the slide show by choosing STARTSHOW.
• For those images you don't want to include in the
slide show, select the image from the Slide Show
Order screen, and then press the CLEAR button.
| ii l_ii_I!Iilli i I i iiii illli_i
pk_TO I OF 21
• ALBUM : Takesyou back to the Photo Album.
• TIMER: Indicates the delay between images in a slide show.
• REPEAT: If ON is selected, the slide show will repeat indefinitely.
• SETORDER: Use to change the order of images in a slide show.
• PLAY:Begins the slide show.
• Slide Show order will reset when you turn player off.
• ALBUM: Takesyou to Photo Album.
• UNDO: Restoresthe image you moved most recently to its original location.
• RESET:Restoresall the images to their original locations.
• STARTSHOW: Begins the slide show.
38 39