Samsung DVD-V5450 User manual

User’s Manual
DVD-V5450
DVD-V5500
DVD-V6000
DVD-V6400
DVD-V6500
www.samsung.com
PAL
OPEN/CLOSE
STANDBY/ON
OK
Downloaded From Disc-Player.com Samsung Manuals

Getting Started
2- English
Safety Instructions
The following illustrations represent precautions
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR Refer to service personnel
DO NOT expose the DVD-VCR to extreme temperature
conditions (below 5°C and above 40°C) or to extreme
humidity conditions (less than 10% and more than 75%)
DO NOT expose the DVD-VCR to direct sunlight
DO NOT expose the DVD-VCR to any liquids DO NOT place any objects on the DVD-VCR or remote control
During a storm and/or lightning, unplug the DVD-VCR from
the mains jack and aerial
If the remote control is not used for a long period of time,
remove the batteries and store it in a cool, dry place
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
This product incorporates copyright protection technology that is protected by method claims of certain U S
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation
Reverse engineering or disassembling is prohibited
Downloaded From Disc-Player.com Samsung Manuals

English - 3
Getting Started
Disc Markings
Disc Type and Characteristics
This DVD-VCR is capable of playing the following types of discs with the corresponding logos:
12 Cm
8 Cm
Single-sided 240 min
Double-sided 480 min
Single-sided 80 min
Double-sided 160 min
Audio
+
Video
- DVD contains excellent sound and
video due to Dolby Digital, DTS and
MPEG-2 system
- Various screen and audio functions
can be easily selected through the on-
screen menu
Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics
DVD
12 Cm
8 Cm
74 min
20 min
74 min
20 min
12Cm
8 Cm
Audio
Audio
+
Video
- CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time
- Video with CD sound, VHS quality &
MPEG-1 compression technology
AUDIO-CD
VIDEO-CD
- DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics )
- It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc or condition of the recording
- The recorded disc may not run as playback depends on the recording speed
- Do not run the player with two discs loaded at the same time
~
PAL
Play Region Number
PAL colour system in Europe, Australia, New Zealand, etc
NTSC broadcast system in U S A, Canada, Korea, Japan, etc
Dolby Digital disc
Stereo disc
Digital Audio disc
DTS disc
Disc contains a Divx software product
DIGITAL
SOUND
STEREO
NTSC
Play Region Number
Both the DVD-VCR and the discs are coded by region These regional codes must match in order for the disc to play
If the codes do not match, the disc will not be played
The Region Number for this player is described on the rear panel of the player.
*(DVD-V6400/DVD-V6500)
Downloaded From Disc-Player.com Samsung Manuals

4- English
Getting Started
Contents

Getting Started
Getting Started
Safety Instructions 2
Disc Type and Characteristics 3
Overviews 6
Front View of the DVD-VCR 6
Rear View of the DVD-VCR 7
Display Indicators 7
Accessories 8
Inserting Batteries in the Remote Control 8
Tour of the Remote Control 9

Connections
Connections
Quick Overview 10
Connecting DVD-VCR to the TV using the
RF Cable 11
Connecting DVD-VCR to the TV using the
SCART Cable 11
Connecting DVD-VCR to a Satellite Receiver
or Other Equipment 12
Connecting DVD-VCR to the TV using the
Audio/Video Cable 13
Connecting DVD-VCR to the TV using the
S-Video Cable (DVD Only) 13
Connecting DVD-VCR to the TV using the
Component Video Cable (DVD Only) 14
AV Receiver Connections 15
Connecting an Audio/Video Input Cable
(DVD-V5500/DVD-V6000/DVD-V6500) 15
Plug & Auto Setup 16

Settings
Settings
Tuning Your Television for the DVD-VCR 17
Setting the Date and Time 18
Setting the Menu Language 19
Presetting the Stations Automatically 19
Presetting the Stations Manually 20
Clearing a Preset Station 22
Changing the Preset Station Table 23
Setting the VCR Output Channel 23

VCR Functions
VCR Functions
Selecting the Colour Mode 24
NICAM 25
Intelligent Picture Control 25
VideoPlus Extend
(DVD-V6000/DVD-V6400/DVD-V6500) 26
Auto Power off 26
Screen Messages 27
Selecting the Cassette Type 27
Repeat Play 28
Selecting the Recording Speed 28
Protecting a Recorded Cassette 28
Recording a Programme Immediately 29
Recording a Programme with
Automatic Stop 29
Recording from Another VCR or Camcorder 30
Using the Assemble Edit Function 30
Using the VideoPlus Feature
(DVD-V6000/DVD-V6400/DVD-V6500) 31
Modifying VideoPlus Programming
(DVD-V6000/DVD-V6400/DVD-V6500) 32
Using the Timer Programming Feature 33
Checking a Preset Recording 35
Cancelling a Preset Recording 36
Downloaded From Disc-Player.com Samsung Manuals

English - 5
Getting Started

Playing Back
Playing Back
Playing a Cassette 37
Adjusting Picture Alignment Manually 37
Selecting the Audio Output Mode 38
Playing a Cassette in Slow Motion 38
Playing a Sequence Frame by Frame 38
Playing a Sequence at Variable Speeds 38
Searching for a Specific Sequence 39
Using the Tape Counter 41

DVD Functions
DVD Functions
Setting Up the Language Features 42
Setting Up the Audio Options 44
Setting Up the Display Options 45
Setting Up the Parental Control 46
DivX(R) Registration
(DVD-V6400/DVD-V6500) 48
Firmware Upgrade (DVD-V6400/DVD-V6500) 48
Special Playback Features 50
Using the Display Function 51
Adjusting the Aspect Ratio (EZ View) 52
Selecting the Subtitle Language 53
Selecting the Audio Language 53
Changing the Camera Angle 54
Zoom 54
Marks 55
Repeat Chapter/Title 55
A to B Repeat 56
MP3/WMA Play 57
Program & Random Play (CD/MP3/WMA) 58
Picture CD Playback 59
DivX/MPEG4 Playback
(DVD-V6400/DVD-V6500) 61
DivX/MPEG4 Special Playback Features
(DVD-V6400/DVD-V6500) 61

Reference
Reference
Technical Specifications 64
Troubleshooting Guide (VCR) 65
Troubleshooting Guide (DVD) 66
Downloaded From Disc-Player.com Samsung Manuals

6- English
Getting Started
Front View of the DVD-VCR (DVD-V5500/DVD-V6000)
Overviews
1. DVD DECK
2. OPEN/CLOSE BUTTON
3. VIDEO CASSETE COMPARTMENT
4. EJECT BUTTON
5. STANDBY/ON BUTTON
6. REWIND/SKIP BACK BUTTON
7. STOP BUTTON
8. PLAY/STILL BUTTON
9. FAST FORWARD / SKIP NEXT BUTTON
10. RECORD BUTTON
11. EZ VIEW BUTTON
12. FRONT PANEL DISPLAY
13. PROGRAMME SELECTION BUTTON
14. DVD/VCR SELECTION BUTTON
15. PROGRESSIVE SCAN MODE BUTTON
16. AUX VIDEO INPUT JACK
17. AUX AUDIO L/R INPUT JACK
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17
Front View of the DVD-VCR (DVD-V6500)
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17
Front View of the DVD-VCR (DVD-V5450/DVD-V6400)
1 2 3 4
5 6 7 8 9 10 11 12 13 14 15
Downloaded From Disc-Player.com Samsung Manuals

English - 7
Getting Started
Rear View of the DVD-VCR (DVD-V6000)
1. AUDIO L/R OUT JACKS
2. AERIAL IN CONNECTOR
3. AUDIO L/R OUT JACKS (DVD ONLY)
4. VIDEO OUT JACK
5. OUT TO TV CONNECTOR
6. AV1 (EURO AV) IN/OUT SCART
(EURO-21) JACK
7. DIGITAL AUDIO OUT JACK (COAXIAL)
8. COMPONENT VIDEO OUT JACKS
9. S-VIDEO OUT JACK
4 5 6 7 8 9
1 2 3
Rear View of the DVD-VCR (DVD-V5450/DVD-V5500/DVD-V6400/DVD-V6500)
Display Indicators
1. AUDIO L, R OUT JACKS
2. AERIAL IN CONNECTOR
3. AV2 (DEC./EXT.) SCART (EURO-21) JACK
4. AUDIO L, R OUT JACKS (DVD ONLY)
5. VIDEO OUT JACK
6. OUT TO TV CONNECTOR
7. AV1 (EURO AV) IN/OUT SCART
(EURO-21) JACK
8. DIGITAL AUDIO OUT JACKS (COAXIAL)
9. COMPONENT VIDEO OUT JACKS
10. S-VIDEO OUT JACK
5 6 7 8 9 10
1 2 3 4
1. The DVD Deck is active.
2. Disc is loaded.
3. The time, counter position, current deck
status is displayed.
4. VHS tape is inserted.
5. The VCR Deck is active.
6. A Timer Recording is programmed or in
progress.
6
1 2 3 4 5
Downloaded From Disc-Player.com Samsung Manuals

8- English
Getting Started
Accessories Inserting Batteries in
the Remote Control
You have just purchased a SAMSUNG DVD-VCR
Together with your DVD-VCR, you will find the
following accessories in the box
You must insert or replace the batteries in the remote
control when you:
• Purchase the DVD-VCR
• Find that the remote control is no longer working
correctly
1Push the tab in the direction of the arrow to
release the battery compartment cover on the
rear of the remote control
2Insert two AAA, RO3 or equivalent batteries,
taking care to respect the polarities:
• + on the battery with + on the remote control
• – on the battery with – on the remote control
• Do not mix different battery types
(manganese and alkaline for example)
3Replace the cover by aligning it with the base of
the remote control and pushing it back into
place
Remote
Control
OPEN/CLOSE
STANDBY/ON
OK
Batteries for
Remote Control
Audio & Video
Cable
Owner’s
Instructions
RF Cable
Downloaded From Disc-Player.com Samsung Manuals

English - 9
Démarrer
Getting Started
Tour of the Remote Control 8. STOP ( ■ )
Used to stop during playback
9. SEARCH/SKIP (
œœ / √√ ,
lœœ
/ √√l
)
Used to search forward or backward through a
disc
Used to skip the title, chapter, or track
10. SUBTITLE
Used to change the DVD’s subtitle language
11. MENU
Used to display the on-screen menu
12. OK
…… / ††
,
œœ/ √√
Used to control the cursor in the on-screen menu
and confirm your choice
13. SPEED
Used to select the recording speed
14. REC ( ●)
Used to make a recording on cassette
15. TIMER
Used to activate the timer recording of a
programme
16. ANGLE
Used to access various camera angles on a
DVD
IPC (Intelligent Picture Control)
Used to adjust the sharpness of the picture
17. OPEN/CLOSE
Used to open and close the disc and video
cassette tray
18. SHUTTLE
Used to play a sequence at variable speeds
19. TV/VCR
Used to select TV or VCR
20. INPUT SEL.
Used to select a external input signal
21. PROG ( / )
Used to select a TV programme
22. F.ADV/STEP
Used to advance a sequence frame by frame
23. PLAY/STILL ( √ll )
Used to play or pause during playback
24. INFO.
Used to display the current setting or disc status
25. RETURN
Used to return to a previous menu
26. EZ VIEW
Used to adjust the aspect ratio on a disc
27. DISC MENU
Used to display a disc menu
28. MARK
Used to mark a position during playback a disc
SEARCH
Used to search for a specific sequence
29. MODE
Used to select the programme or random play
REPEAT
Used to allow the repeat play a title, chapter,
track, disc or A-B
1. STANDBY/ON
Used to turn the power on or off
2. Number Buttons
3. CLEAR
Used to clear a preset TV station
Used to cancel a preset recording
Used to cancel a preset mark
Used to set the tape counter to zero
Used to resume normal play during repeat play
4. VCR
Used to operate VCR
5. DVD
Used to operate DVD
6. TRK (
……/ †† )
Used to adjust picture alignment manually to
obtain the best possible picture during playback
7. AUDIO
Used to access various audio functions
OPEN/CLOSE
STANDBY/ON
OK
Downloaded From Disc-Player.com Samsung Manuals

10 - English
Connections
Connections
•
Quick Overview . . . . . . . . . . . . . . . . . . . . . 10
• Connecting DVD-VCR to the TV using the
RF Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• Connecting DVD-VCR to the TV using the
SCART Cable . . . . . . . . . . . . . . . . . . . . . . . 11
• Connecting DVD-VCR to a Satellite Receiver or
Other Equipment . . . . . . . . . . . . . . . . . . . . 12
• Connecting DVD-VCR to the TV using the
Audio/Video Cable . . . . . . . . . . . . . . . . . . 13
• Connecting DVD-VCR to the TV using the
S-Video Cable (DVD Only) . . . . . . . . . . . . . 13
• Connecting DVD-VCR to the TV using the
Component Video Cable (DVD Only) . . . . . 14
• AV Receiver Connections . . . . . . . . . . . . . . 15
• Connecting an Audio/Video Input Cable
(DVD-V5500/DVD-V6000/DVD-V6500) . . . . 15
• Plug & Auto Setup . . . . . . . . . . . . . . . . . . . 16
Quick Overview
A Quick overview presented in this guide will give
you enough information to start using the DVD-VCR
Connecting DVD-VCR to the TV using the RF
Cable
Connecting DVD-VCR to the TV using the
SCART Cable
Connecting DVD-VCR to a Satellite
Receiver or Other Equipment
Connecting DVD-VCR to the TV using the
Audio/Video Cable
Connecting DVD-VCR to the TV using the
S-Video Cable (DVD Only)
Connecting DVD-VCR to the TV using the
Component Video Cable (DVD Only)
AV Receiver Connections
Connecting an Audio/Video Input Cable
(DVD-V5500/DVD-V6000/DVD-V6500)
Plug & Auto Setup
Downloaded From Disc-Player.com Samsung Manuals

English - 11
Connections
Connecting DVD-VCR
to the TV using the
RF Cable
To receive television programmes a signal must be
received from one of the following sources:
• An outdoor aerial
• An indoor aerial
• A cable television network
• A satellite receiver
1Remove the aerial or network input cable from
the television
2Connect this cable to the 75Ω coaxial jack
marked on the rear of your DVD-VCR
3Plug the RF Cable supplied into the jack on
your DVD-VCR
4Plug the other end of the RF Cable into the
connector previously used for the aerial on the
television
TV
Make sure that both the television and the
DVD-VCR are switched off before
connecting the cables
Note
TV
RF cable
Aerial cable
Aerial
2
3
4
Connecting DVD-VCR
to the TV using the
SCART Cable
You can connect your DVD-VCR to the television
using the SCART cable if the appropriate input is
available on the television You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD-VCR
1Connect the Aerial Cable
2Connect one end of the SCART cable to the AV1
(EURO AV) jack on the rear of the DVD-VCR
3Plug the other end into the appropriate
connector on the television
❚Connecting the Audio Output Cable
You can connect your DVD-VCR to a Hi-Fi system
Example:You wish to take advantage of the quality of
your Hi-Fi stereo system when watching a
disc play
4Plug the audio output cable into the audio
connectors on the rear of your DVD-VCR
5Plug the other end of the audio cable into the
appropriate input connectors on your Hi-Fi
stereo system
4
2
TV
RF cable
Aerial
3
1
5
Regardless of the type of connection chosen,
you must always connect the RF Cable
supplied Otherwise, no picture will be visible on
the screen when the DVD-VCR is switched off
Make sure that both the television and the
DVD-VCR are switched off before connecting
the cables
Note
Downloaded From Disc-Player.com Samsung Manuals

12 - English
1AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV2 (DEC /EXT ) jack
on the rear of the DVD-VCR
After making this connection, select the source
by pressing the INPUT SEL. button for the AV2
input sources
2By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner
RF output channel of the satellite receiver
should be adjusted away from channel 60,
which is used by the DVD-VCR, e g re-adjust
to channel 65
3AV1(EURO AV) : By means of 21-pin Scart
Cable
Connect the end of the SCART cable to the
AV1(EURO AV) jack on the rear of the DVD-
VCR Plug the other end into the appropriate
connector on the television
Connections
SCART cable
RF cable
Aerial
1
2
3
Satellite Receiver or other Equipment
Aerial cable
TV
Connecting DVD-VCR to a
Satellite Receiver or Other
Equipment
You can connect your DVD-VCR to a Satellite
receiver or other DVD-VCR using the SCART cable
if the appropriate outputs are available on the
equipment chosen The following illustrations give a
few examples of the connection possibilities
* DVD-V6000
1AV1(EURO AV): By means of 21-pin Scart
Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV1 (EURO AV) jack
on the rear of the DVD-VCR
After making this connection, select the source
by pressing the INPUT SEL. button for the AV1
input sources
2By means of RF Cable
After making this connection, you must preset
the station received through the satellite tuner
RF output channel of the satellite receiver
should be adjusted away from channel 60,
which is used by the DVD-VCR, e g re-adjust
to channel 65
SCART cable
RF cable
Aerial
1
2
Satellite Receiver or other Equipment
Aerial Cable
TV
Downloaded From Disc-Player.com Samsung Manuals

English - 13
Connections
Connecting DVD-VCR to
the TV using the
S-Video Cable (DVD Only)
You will enjoy high quality images S-Video seperates
the picture element into black and white(Y) and
colour(C) signals to present clearer images than regular
video input mode
1Connect one end of the S-Video cable into the
S-VIDEO output jack on the rear of the DVD-VCR
2Plug the other end of the S-Video cable into the
appropriate input connector on the television
3Connect one end of the audio cables supplied into
the AUDIO LINE output jacks on the rear of the
DVD-VCR
• Take care to respect the colour coding of the left
and right channels
4Plug the other end of the audio cables into the
appropriate input connectors on the television
Connecting DVD-VCR
to the TV using the
Audio/Video Cable
You can connect your DVD-VCR to the television using
the audio/video cable if the appropriate input is available
on the television
1Connect one end of the video cable into the
VIDEO output jack on the rear of the DVD-VCR
2Plug the other end of the video cable into the
appropriate input connector on the television
3Connect one end of the audio cables supplied into
the AUDIO output jacks on the rear of the DVD-
VCR
• Take care to respect the colour coding of the
left and right channels
4Plug the other end of the audio cables into the
appropriate input connectors on the television
3
3
4
2
2
4
1
1
Use the S-Video connection method only for
the DVD
Note
Downloaded From Disc-Player.com Samsung Manuals

❚Progressive Scan
If the TV connected supports Progressive Scan, press
the P.SCAN button on the front panel in stop mode
• The Progressive Scan feature is only available
for DVD Activate it in DVD Stop mode
• The message “Press OK to confirm Progressive
scan mode Otherwise press RETURN ” will be
displayed If you want Progressive scan mode,
select OK Make sure that the disc has stopped
completely before changing the mode
• To cancel the progressive scan mode, press the
P.SCAN button in stop mode
• Make sure that the colour coded connections match
That is, the Y, Pb and Pr component output jacks of
your DVD -VCR should be connected to the exact
corresponding component input jacks on your TV
Otherwise, red or blue images will be displayed on
the TV screen
COMPONENT VIDEO OUT
COMPONENT INPUT
14 - English
Démarrer
COMPONENT VIDEO IN
If your TV does not have Progressive scan
mode, there will be no signal on the screen
If you press the P.SCAN button, it will be
changed to Interlace scan mode
See your TV User’s Manual to find out if
your TV supports Progressive Scan
If Progressive Scan is supported, follow the
TV User’s instructions regarding
Progressive Scan settings in the TV’s menu
system
Depending on your TV, the method of
connection may differ from the illustration
above
What is "Progressive Scan"?
Progressive scan has twice as many
scanning lines as the interlace output
method has Progressive scanning method
can provide better and clearer picture
quality
You must connect the player to the
component(s) before using the Progressive
Scan feature
Use the Component Video connection
method only for the DVD
NTSC DVD disk is not supported
Note
Connecting DVD-VCR to the
TV using the Component
Video Cable (DVD Only)
Your TV must support progressive scan input to allow
you to watch component video output
You will enjoy high quality accurate colour reproduction
images Component video seperates the picture
element into black and white(Y), blue(Pb), red(Pr)
signals to present most clear and clean images
1Connect Component video cables between the
COMPONENT VIDEO OUT jacks on the rear of
the DVD-VCR and COMPONENT VIDEO IN jacks
on the rear of the TV
2Connect audio cables between the AUDIO LINE
OUT jacks on the rear of the DVD-VCR and
AUDIO IN jacks on the rear of the TV
• Take care to respect the colour coding of the left
and right channels
1
2
COMPONENT VIDEO OUT
Downloaded From Disc-Player.com Samsung Manuals

English - 15
Démarrer
Digital Audio out
Jack
AV Receiver
Connections
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVD-
VCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers
If your A/V receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the DVD-VCR’s
built-in Dolby Digital Decoder Use the Digital Audio Out
connection below
1Connect a Digital Audio coaxial cable from the
Digital Audio Out jacks on the panel of the DVD-
VCR to their corresponding Digital Audio Input
jacks on your A/V Receiver:
To Digital Audio Input of an A/V
Receiver with a Dolby, MPEG2, DTS,
Digital Decoder
Connecting an Audio/Video
Input Cable(DVD-V5500/
DVD-V6000/DVD-V6500)
You can connect other audio/video equipment to your
DVD-VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen
Examples : • You wish to copy a video cassette with
the help of a second VCR
• You wish to play back and/or copy
pictures taken with a camcorder
• Make sure that both the external devices
and the DVD-VCR are switched off
before connecting the cables
1Connect one end of the video cable into the
VIDEO input jack on the front of the DVD-VCR
2Plug the other end of the video cable into the
appropriate output connector on the other
system (VCR or Camcorder etc)
3Connect one end of the audio cable supplied into
the AUDIO input jacks on the front of the DVD-
VCR
• Take care to respect the colour coding of the
left and right channels
4Plug the other end of the audio cable into the
appropriate output connectors on the other
system (VCR, camcorder etc)
2
4
3
1
Downloaded From Disc-Player.com Samsung Manuals

5Start the auto scanning
The number of stations automatically stored by
the DVD-VCR depends on the number of
stations that it has found
6The current time and date are displayed
automatically
Check the date and time
if it is :
• Incorrect, refer to “Setting the date and time”
(See page 18)
• Correct, press the RETURN button twice to
exit the menu
Now, you only have to switch the DVD-VCR
on and it is ready for use
Function for “Plug & Auto Set Up” is fixed
already So if you want to change this fixed
one, you can change (refer to “Presetting
the Stations manually” page 20)
16 - English
Démarrer
Plug & Auto Setup
Your DVD-VCR will automatically set itself up when it
is plugged into the mains for the first time
TV stations will be stored in memory The process
takes a few minutes Your DVD-VCR will then be
ready for use
1Connect the RF Cable as indicated on page 11
(Connecting Your DVD-VCR to the TV using the
RF Cable)
2Plug the DVD-VCR into the mains
• “AUTO” in the front panel display flickers
3The Language Set menu is displayed
Press the …or †button, move the selection
bar to select the desired language then press
OK button
4Start the auto setup
Note
Language Set
√√English
Français
Deutsch
Español
Italiano
Nederlands
OK RETURN MENU
Auto Setup will be
started.
Check antenna and TV
cable connection.
RETURN MENU
Auto Setup
RETURN MENU
Please Wait
10%
√√
SETUP
DVD
VCR
PROG
FUNC
Clock Set
Time Date Year
12 : 00 01 / JAN / 2005 SAT
Auto Clock : On
OK RETURN MENU
Downloaded From Disc-Player.com Samsung Manuals

English - 17
Settings
Settings Tuning Your Television
for the DVD-VCR
You must tune your television for the DVD-VCR only
if you are using the RF cable
To view pictures from your DVD-VCR when a Scart
cable is used, the television must be set to the
audio/video mode (AV)
1Switch on the television
2Switch on the DVD-VCR by pressing the
/I STANDBY/ON on the front of the DVD-VCR
or STANDBY/ON on the remote control
3Select a programme position on the television
to be reserved for use with your DVD-VCR
4Insert the video cassette in the DVD-VCR
Check that the DVD-VCR starts reading the
cassette; if not, press the √II button
5Start a scan on your television or set the
television to UHF channel 60
6Fine tune the television until the pictures and
sound are obtained clearly
7When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television
That programme is now reserved for use with
your DVD-VCR
• Tuning Your Television for the DVD-VCR . . 17
• Setting the Date and Time . . . . . . . . . . . . . . 18
• Setting the Menu Language . . . . . . . . . . . . . 19
• Presetting the Stations Automatically . . . . . 19
• Presetting the Stations Manually . . . . . . . . . 20
• Clearing a Preset Station . . . . . . . . . . . . . . . 21
• Changing the Preset Station Table . . . . . . . . 23
• Setting the VCR Output Channel . . . . . . . . . 23
Downloaded From Disc-Player.com Samsung Manuals

18 - English
Settings
3Press the œor √button to select the hour,
minutes, day, month, and year
The selected option is highlighted
Press the …or †button to set them
The day of the week is displayed automatically
Press the OK button
• You can hold the …or † button to scroll
more quickly through the values
• Press the MENU button to exit the menu
❚Setting the Clock Automatically
4Press the œor √button to select Auto Clock
Press the …or †button to select On
SETUP
DVD
VCR
PROG
FUNC
Clock Set
Time Date Year
12 : 00 01 / JAN / 2005 SAT
Auto Clock : On
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
Clock Set
OK RETURN MENU
Time Date Year
12 : 00 01 / JAN / 2005 SAT
Auto Clock : On
Setting the Date and
Time
Your DVD-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording
• Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
• You purchase the DVD-VCR
• Do not forget to reset the time when you change
clocks from winter to summer time and vice versa
1Press the MENU button, then press the OK or
√button
2Press the …or †button to select Clock, then
press the OK or √button
The Clock Set menu is displayed
SETUP
DVD
VCR
PROG
FUNC
Setup
Language : English
√√
Clock
√√
Install
√√
User Set
√√
Auto Power Off : Off
√√
Screen Messages : On
√√
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
Clock Set
Time Date Year
12 : 00 01 / JAN / 2005 SAT
Auto Clock : On
OK RETURN MENU
Downloaded From Disc-Player.com Samsung Manuals

English - 19
Settings
Setting the Menu
Language
1Press the MENU button, then press the OK or
√button
2Press the OK or √button again
The Language Set menu is displayed
3Press the …or †button to select desired
language, then press the OK or √button
• Press the MENU button to exit the menu
SETUP
DVD
VCR
PROG
FUNC
Setup
Language : English
√√
Clock
√√
Install
√√
User Set
√√
Auto Power Off : Off
√√
Screen Messages : On
√√
OK RETURN MENU
Language Set
√√English
Français
Deutsch
Español
Italiano
Nederlands
OK RETURN MENU
Presetting the Stations
Automatically
You do not need to preset the stations if you have
already set them automatically (refer to “Plug & Auto
Set Up” on page 15)
Your DVD-VCR contains a built-in tuner used to
receive television broadcasts
You must preset the stations received through the
tuner This can be done:
• Plug & Auto Set up (refer to page 15)
• Automatically
• Manually (refer to page 20)
You can store up to 80 stations
1Press the MENU button, then press the OK or
√button
2Press the …or †button to select Install, then
press the OK or √button
The Install menu is displayed
SETUP
DVD
VCR
PROG
FUNC
Setup
Language : English
√√
Clock
√√
Install
√√
User Set
√√
Auto Power Off : Off
√√
Screen Messages : On
√√
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
Install
Auto Setup
√√
Manual Setup
√√
VCR Output CH :CH60
√√
OK RETURN MENU
Downloaded From Disc-Player.com Samsung Manuals

20 - English
Settings
Presetting the Stations
Manually
You do not need to preset the stations manually if
you have already set them automatically
1Press the MENU button, then press the OK or
√button
2Press the …or †button to select Install, then
press the OK or √button
The Install menu is displayed
3Press the …or †button to select Manual
Setup, then press the OK or √button
The TV STATION TABLE menu is displayed
SETUP
DVD
VCR
PROG
FUNC
Setup
Language : English
√√
Clock
√√
Install
√√
User Set
√√
Auto Power Off : Off
√√
Screen Messages : On
√√
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
Install
Auto Setup
√√
Manual Setup
√√
VCR Output CH :CH60
√√
OK RETURN MENU
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME
1
2
3
4
5
……†† √√
SWAPPING : OK
DELETE : CLEAR RETURN
3Press the …or †button to select Auto Setup,
Press the OK button
A message is displayed, indicating that any
channels already preset on your DVD-VCR will
be deleted
4Press the OK button to start the auto scanning
The message Please Wait is displayed
• The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically
to programme 1
• If you wish to cancel the auto scanning before
the end, press the MENU button
Auto Setup
Your data will be lost
Press OK to continue
MENU to exit
OK RETURN MENU
Auto Setup
RETURN MENU
Please Wait
10%
√√
The number of stations automatically stored
by the DVD-VCR depends on the number
of stations that it has found
The time and date are set automatically
from the broadcast signal If the signal is
weak or ghosting occurs, the time and date
may not be set automatically In this case,
they should be set manually (refer to page
18)
Once the auto scanning procedure has
finished, some stations may have been
stored more than once; select the stations
with the best reception and delete the ones
no longer required (refer to page 22)
Note
Downloaded From Disc-Player.com Samsung Manuals