Samsung LA15S51BP User manual

LCD TV
LA15S51BP
LA20S51BP
LS17M24CP
Owner’s Instructions
Before operating the unit,
please read this manual thoroughl ,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
TELETEXT
This device is a Class B digital apparatus.
Register our product at www.samsung.com/global/register
Contact SAMSUNG WORLD-WIDE
If ou have an questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
SOUTH AFRICA
TAIWAN
THAILAND
U.A.E
VIETNAM
Custom r Car C nt r
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282, 1600 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
0860 7267864 (SAMSUNG)
0800-329-999
1800-29-3232, 02-689-3232
800SAMSUNG (7267864)
1 800 588 889
W b Sit
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/m
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/za
www.samsung.com/tw
www.samsung.com/th
www.samsung.com/mea
www.samsung.com/vn
BN68-01013B-00
BN68-01013B-X0Cover.qxd 2/16/06 3:33 AM Page 1

Pencegahan Saat Menampilkan Gambar Diam
Gambar diam dapat menyebabkan kerusakan permanen pada layar TV.
• Jangan menampilkan gambar diam pada panel LCD lebih dari 2 jam karena dapat menyebabkan penyimpanan gambar layar.
Penyimpanan gambar ini juga dikenal sebagai "layar terbakar".
Untuk menghindari penyimpanan gambar tersebut kurangi tingkat kecerahan dan kontras pada layar apabila menampilkan gambar diam.
• Menyaksikan TV LCD pada format 4:3 dalam waktu lama dapat meninggalkan bekas garis tepi di bagian kiri kanan
dan tengah layar yang disebabkan oleh perbedaan pancaran cahaya pada layar.
Memutar DVD atau konsol game dapat menyebabkan efek yang serupa pada layar.
Kerusakan yang disebabkan oleh efek di atas tidak dicakup dalam Garansi.
•Menampilkan gambar diam dari Video game dan PC lebih lama dari jangka waktu tertentu dapat menghasilkan jejak potongan gambar.
Untuk mencegah efek ini kurangi ‘brightness ('terang)'dan ‘contrast (kontras)' apabila menampilkan gambar diam.
Still-UK.qxd 2/13/06 11:59 PM Page 1

English-1
English
Contents
CONNECTING AND PREPARING YOUR TV
List of Parts .............................................................. 2
How to Adjust the Stand .......................................... 2
How to Adjust the Angle of the TV ...................... 3
Installing the all Mount Kit .................................... 3
Installing VESA compliant mounting devices .......... 3
Viewing the Control Panel ........................................ 4
Viewing the Connection Panel.................................. 5
Viewing the Remote Control .................................... 6
Installing Batteries in the Remote Control ................ 6
Switching On and Off................................................ 7
Placing Your Television in Standby Mode ................ 7
Plug & Play .............................................................. 7
SETTING THE CHANNELS
Storing Channels Automatically................................ 8
Storing Channels Manually ...................................... 9
Editing the Channels ................................................ 10
Sorting the Stored Channels .................................... 10
Assigning Channels Names .................................... 11
Fine Tuning Channel Reception .............................. 11
SETTING THE PICTURE
Changing the Picture Standard ................................ 12
Adjusting the Custom Picture .................................. 12
Changing the Colour Tone........................................ 13
SETTING THE SOUND
Changing the Sound Standard ............................13
Adjusting the Volume Automatically ....................13
SETTING THE TIME
Setting and Displaying the Current Time..............14
Setting the Sleep Timer ........................................14
Switching the Television
On and Off Automatically......................................15
SETTING THE OTHERS
Choosing Your Language ....................................15
Setting the Blue Screen Mode..............................16
Selecting the Source ............................................16
Editing the Input Source Names ..........................16
USING THE TELETEXT FEATURE
Teletext Decoder ..................................................17
Displaying the Teletext Information ......................17
Selecting a Specific Teletext Page ......................18
Using Fastext to Select a Teletext Page ..............18
Storing Teletext Pages..........................................18
SETTING THE PC
Setting up Your PC Software
(Based on indows XP) ......................................19
Display Modes ......................................................19
Setting the PC ......................................................20
RECOMMENDATIONS FOR USE
Troubleshooting:
Before Contacting Service Personnel ..................21
Technical and Environmental Specifications ......21
Symbol Press Important Note One-Touch
Button
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 1

English-2
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing contact your dealer.
Remote Control
& Batteries (AAA x 2) Power Cord Wall Mount kit Owner’s Instructions
Warranty card Service Network Card Safety Guide Registration Cards
How to Adjust the Stand
1. Place the front of the TV onto a soft cloth or cushion on a table as in Figure (1).
- Align the TV bottom along the table edge.
2. Press on the center of the TV back.
Adjust the stand as in Figure (2) while pressing the “PUSH” button on the back of the stand.
3. Place the TV on the table so that the TV sits safely.
When you adjust the stand press the “PUSH" button on the back of the stand.
Warranty card / Service Network Card / Safety Guide / Registration Cards (Not available in all locations)
17”
15”, 20”
(1) (2)
PUSH button
The product colour and shape may vary depending on the model.
BN68-01013B-X1Eng.qxd 2/14/06 4:52 AM Page 2

English-3
How to Adjust the Angle of the TV
1. Figure (1) shows the adjustment angle (0°~13°) when you use the LCD on its stand .
Excessive tilting can turn the LCD TV over which may cause damage.
2. Figure (2) shows the adjustment angle (13°~80°) when you convert the LCD from stand-based use to wall-mount.
3. Figure (3) shows the adjustment angle (0°~10°) when you mount the LCD TV to a wall.
You will hear a “Click ” sound when changing the angle from 1 to 2 or 3 to 2.
When you adjust the stand press the “PUSH" button on the back of the stand.
(1) Angle adjustment when using the
TV on its stand.
(2) Angle adjustment when converting
from Stand to Wall mount (1 3 3 1)
(3) Angle adjustment when LCD TV
is wall-mounted
Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed information on
installing the wall mount see the instructions provided with the Wall Mount items. Contact a technician for
assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any
damage to the product or injury to yourself or others if you elect to install the TV on your own.
Installing the Wall ount Kit
The product colour and shape may vary depending on the model.
The product colour and shape may vary depending on the model.
Installing VESA compliant mounting devices
(2) (3)
When you adjust the stand press the “PUSH" button on the back of the stand.
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Adjust the stand pressing the "PUSH" button on the back of the stand.
3. Align the mounting interface pad (not supplied) with the holes in the stand bottom and secure it with the four
screws that come with the arm-type base wall mount hanger or other bases (not supplied).
Mounting pad
(sold separately)
PUSH button
BN68-01013B-X1Eng.qxd 2/14/06 4:52 AM Page 3

English-4
Viewing the Control Panel
SOURCE
Toggles between all the available input sources
(TV - AV - S-Video - Component - PC).
In the on-screen menu, use this button as you use the
ENTER button on the remote control.
MENU
Press to see an on-screen menu of your TV’s features.
Press to decrease or increase the volume.
In the on-screen menu, use the buttons
as you use the and buttons on the remote control
Press to change channels. In the on-screen menu, use the
buttons as you use the andbuttons
on the remote control. ( ithout the Remote Control, You
can turn on the TV by using the Channel buttons.)
POWER
Press to turn the TV on and off.
Speakers
(Headphone Jack)
Connect a set of external headphones to this jack for private
listening.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Power Indicator
Blinks and turns off when the power is on and lights up in
stand-by mode.
The product colour and shape may vary depending on the model.
LA15S51BP
LA20S51BP
LS17M24CP
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 4

English-5
Viewing the Connection Panel
Power Input
Whenever you connect an external device to your TV, make sure that power on the unit is turned o .
When connecting an external device, match the colour o the connection terminal to the cable.
The product colour and shape may vary depending on the model.
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set rom one o the ollowing sources:
- An outdoor aerial / A cable television network / A satellite network
Connecting External A/V Devices
- Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables (optional) to “L - AUDIO - R” on the rear o your set and the other ends to corresponding audio
out connectors on the A/V device.
Connecting Component Devices (DTV/DVD)
- Connect component video cables (optional) to component connector (“Y”, “PB”, “PR”) on the rear o your set and the other
ends to corresponding component video out connectors on the DTV or DVD.
- I you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)
and connect the DTV (or DVD) to component connector (“Y”, “PB”, “PR”) on your set.
- The PR, PBand Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to “L - AUDIO - R” on the rear o your set and the other ends to corresponding audio
out connectors on the DTV or DVD.
Connecting Computer
- Connect the D- Sub cable (optional) to “PC IN” on the rear o your set and the other end to the
Video Card o your computer.
- Connect the stereo audio cable (optional) to “PC AUDIO IN” on the rear o your set and the other end to “Audio Out” o the
sound card on your computer.
Kensington ock
- The Kensington lock (optional) is a device used to physically ix the system when used in a public place.
- I you want to use a locking device, contact the dealer where you purchased the TV.
- The place o the Kensington Lock may be di erent depending on its model.
BN68-01013B-X1Eng.qxd 2/14/06 4:19 AM Page 5

1. Slide the cover out completely.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. The remote control can be used up to about 23 feet from
the TV. (Assuming typical TV usage, the batteries last for about one year.)
I the remote control doesn’t work, check the ollowing:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Installing Batteries in the Remote Control
English-6
Television Standby button
Number buttons for direct
channel access
One/Two-digit channel selection
: Volume increase
: Volume decrease
Temporary sound switch-off
Selects the TV mode directly
Displays the main on-screen menu
Sound effect selection
Previous channel
P : Next channel
P : Previous channel
Available source selection
Use to see information on the
current broadcast
Exit the on-screen menu
Control the cursor in the menu
Automatic Power-off
Picture effect selection
Sound mode selection
Teletext Functions
Teletext hold
Exit from the teletext display
Teletext index
Teletext sub page
Teletext display/mix both teletext
information and the normal broadcast
Fastext topic selection
P : Teletext next page
P : Teletext previous page
Teletext mode selection (LIST/FLOF)
Teletext reveal
Teletext store
Teletext size selection
The performance of the remote control may be affected by bright light.
For details, refer to further instructions.
Viewing the Remote Control
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 6

The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on the lower-right panel or right side of the panel.
2. Press the POWER button on the lower-right panel.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up down ( ) button on the remote control
(or press button on the lower-right panel or right side of the panel.)
When you switch the set on for the very first time, you will be asked to choose language in which the menus
are to be displayed.
4. To switch your set off, press the POWER button again.
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode
can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
The screen is turned off and a standby indicator appears on the lower-right panel.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9) or channel
up down ( ) button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
Switching On and Off
Placing Your Television in Stand y Mode
When the TV is initially powered on, several basic settings proceed
automatically and subse uently. The following settings are available.
1. Press the POWER button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.
2. Select the appropriate language by pressing the or button.
Press the ENTER button to confirm your choice.
3. The message “Check antenna input.” is displayed with “OK” selected.
Press the ENTER button.
Please check that the antenna cable is connected correctly.
4. Select the appropriate country by pressing the or button.
Press the ENTER button to confirm your choice.
Plug & Play
English-7
BN68-01013B-X1Eng.qxd 2/16/06 3:18 AM Page 7

English-8
Language: Select your language.
Area: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the or  button to select “Setup”, then press the ENTER button.
2. Press the or  button to select “Plug & Play” , then
press the ENTER button.
3. The message to “Start Plug & Play” is displayed.
5. The “Auto Store” menu is displayed with the “Start” selected.
Press the ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the ENTER button at any time to interrupt the memorization process.
6. Press the ENTER button.
Select the “Hour” or “Minute” by pressing the
or 
button.
Set the “Hour” or “Minute” by pressing the
or 
button.
You can also set the hour and minute by pressing the number buttons on the
remote control.
7. Press the ENTER button to confirm your setting.
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers.
However, you can sort numbers manually and clear any channels you do
not wish to watch.
1. Press the MENU button to display the menu.
Press the or button to select “Channel”,
then press the ENTER button.
2. Press the ENTER button to select “Area”.
3. Select the appropriate country by pressing the or button.
Press the ENTER button to confirm your choice.
4. Press the or button to select “Auto Store”,
then press the ENTER button.
5. Press the ENTER button.
The TV will begin memorizing all of the available channels.
Press the ENTER button at any time to interrupt the memorization process
and return to the “Channel” menu.
6. After all the available channels are stored, the “Sort” menu appears.
Storing Channels Automatically
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 8

English-9
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish
to identify.
1. Press the MENU button to display the menu.
Press the or button to select “Channel”,
then press the ENTER button.
2. Press the or button to select “Manual Store”,
then press the ENTER button.
3. Press the ENTER button to select “Programme”.
4. To assign a programme number to a channel, find the correct number
by pressing the or button and then press the ENTER button.
You can also set a programme number by pressing number buttons on the
remote control.
5. Press the or button to select “Colour System”,
then press the ENTER button.
6. Select the colour standard required by pressing the or button,
then press the ENTER button.
7. Press the or button to select “Sound System”,
then press the ENTER button.
8. Select the sound standard required by pressing the or button,
then press the ENTER button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored,
press the or button to select “Channel”.
Press the ENTER button. Select C(Air channel) or S(Cable channel)
by pressing the or button. Press the  button to select channel.
Select the required number by pressing the or button and then
press the ENTER button.
Channel mode: P (Programme mode)
C (Air channel mode)
S (Cable channel mode)
You can also set a programme number by pressing number buttons on the
remote control.
10. If you do not know the channel numbers,
press the or button to select “Search”. Press the ENTER button.
Search by pressing the or button and then
press the ENTER button.
11. Press the or button to select “Store”,
then press the ENTER button.
Press the or button to select “OK”, then press the ENTER button.
12. Repeat steps 3to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
Storing Channels Manually
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 9

English-10
You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1. Use the number buttons to directly select the channel that
will be added or deleted.
2. Press the MENU button to display the menu.
Press the or button to select “Channel”,
then press the ENTER button.
3. Press the or button to select “Add/Delete”,
then press the ENTER button.
4. Repeatedly pressing the ENTER button will alternate between add
channel and delete channel.
5. Press the Por Pbuttons to switch to the appropriate channel,
then repeat above.
6. Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the number buttons
on the remote control.
Editing the Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you watch
most often.
1. Press the MENU button to display the menu. Press the or button to
select “Channel”, then press the ENTER button.
2. Press the or button to select “Sort”,
then press the ENTER button.
3. Press the ENTER button to select “From”. Press the or button
until the channel number that you wish to change is displayed.
Press the ENTER button.
4. Press the or button to select “To”, then press the ENTER button.
Press the or button until the new number by which you wish to
identify the channel is displayed.
Press the ENTER button.
5. Press the or button to select “Store”,
then press the ENTER button.
Press the or button to select “OK”, then press the ENTER button.
The selected channel is exchanged with the one previously stored to the chosen
number.
6. Repeat steps 3to 5for another channel to be sorted.
7. Press the EXIT button to exit.
Sorting the Stored Channels
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 10

English-11
Channel names will be assigned automatically when channel information
is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the MENU button to display the menu. Press the or button to
select “Channel”, then press the ENTER button.
2. Press the or button to select “Name”,
then press the ENTER button.
3. If necessary, select the channel to be assigned to a new name by
pressing the
or  button. Press the ENTER button.
4.
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters (
- , space)
5. Repeat steps 3to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
Assigning Channels Names
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Con irm the name
Then...
Press the or  button
Press the  button
Press the
 button
Press the ENTER button
Fine tuned channels that have been saved are marked with an asterisk “*” on the
right-hand side of the channel number in the channel banner. And the channel number
turns red.
To reset the fine-tuning, select “Reset” by pressing the or button and then press
the
ENTER button.
Use fine tuning to manually adjust a particular channel for optimal
reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the MENU button to display the menu.
Press the or button to select “Channel”,
then press the ENTER button.
3. Press the or button to select “Fine Tune”,
then press the ENTER button.
4. Press the or button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT button to exit.
Fine Tuning Channel Reception
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 11

English-12
You can select the type of picture which best corresponds to your
viewing requirements.
1. Press the MENU button to display the menu. Press the or button to
select “Picture”, then press the ENTER button.
2. Press the ENTER button to select “Mode”.
3. Press the or  button to select the desired picture effect.
Press the
ENTER button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
Custom: Select to view your favorite display settings.
(Refer to “Adjusting the Custom Picture”)
You can also press the
P.MODE button on the remote
control to select one of the
picture settings.
The Picture mode must be adjusted separately for each input source.
If you make any changes to these settings, the picture mode is automatically switched
to “Custom”.
In PC Mode, Only “Contrast” and “Brightness” can be adjusted.
Changing the Picture Standard
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more
natural look.
Your set has several settings which allow you to control picture quality.
1. Press the MENU button to display the menu. Press the or button to
select “Picture”, then press the ENTER button.
2. Press the or button to select “Custom”,
then press the ENTER button.
3. Press the or button to select a particular item.
Press the
ENTER button.
4. Press the or button to decrease or increase the value of a
particular item.
Press the ENTER button.
5. Press the EXIT button to exit.
Adjusting the Custom Picture
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 12

English-13
Each broadcasting station has its own signal conditions, and so it is not
easy for you to adjust the volume every time the channel is changed.
This feature let you automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER button.
2. Press the or button to select “Auto Volume”, then press the
ENTER button.
3. Press the or button to select “On” or “Off”. Press the ENTER button.
4. Press the EXIT button to exit.
Adjusting the Volume Automatically
You can select the type of the special sound effect to be used when
watching a given broadcast.
1. Press the MENU button to display the menu. Press the or button to
select “Sound”, then press the ENTER button.
2. Press the ENTER button to select “Mode”.
3. Press the or  button to select the desired sound effect.
Press the
ENTER button.
4. Press the EXIT button to exit.
Standard: Selects the normal sound mode.
Speech: Emphasizes voices over other sounds.
Changing the Sound Standard
You can also select these
options by simply pressing the
S.MODE button on the remote
control.
You can select the most comfortable colour tone to your eyes.
1. Press the MENU button to display the menu. Press the or button to
select “Picture”, then press the ENTER button.
2. Press the or button to select “Colour Tone”, then press the
ENTER button.
3. Press the or button to select the desired colour tone setting.
Press the
ENTER button.
4. Press the EXIT button to exit.
Changing the Colour Tone
Cool 2: Makes the colour temperature bluer than “Cool 1” menu.
Cool 1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature redder than “ arm1” menu.
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 13

English-14
You can set the TV’s clock so that the current time is displayed when
you press the INFO button. You must also set the time if you wish to
use the automatic On/Off timers.
1. Press the MENU button to display the menu. Press the or button to
select “Setup”, then press the ENTER button.
2. Press the ENTER button to select “Time”.
3. Press the ENTER button to select “Clock Set”.
4.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
To...
Move to “Hour” or “Minute”
Set the “Hour” or “Minute”
Press the ENTER button.
Press the...
 or button.
 or button.
Setting and Displaying the Current Time
You can select a time period of between 30 and 180 minutes after which
the television automatically switches to standby mode.
1. Press the MENU button to display the menu. Press the or button to
select “Setup”, then press the ENTER button.
2. Press the ENTER button to select “Time”.
3. Press the or button to select “Sleep Timer”, then press the
ENTER button.
4. Press the or button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180). Press the
ENTER button.
The TV automatically switches to standby mode when the timer reaches 0.
5. Press the EXIT button to exit.
Setting the Sleep Timer
Press the SLEEP button on
the remote control repeatedly
until the appropriate time
interval appears.
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 14

English-15
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at
the time you select.
Switch off automatically at the time you select.
1. Press the MENU button to display the menu. Press the or button to
select “Setup”, then press the ENTER button.
2. Press the ENTER button to select “Time”.
3. Press the or button to select “On Timer”, then press the
ENTER button.
4. Press the or button to adjust “Hour”, then press the button to
move to the next step. Set other items using the same method as above.
hen finished, press the ENTER button to return.
5. Press the or button to select “Off Timer”,
then press the ENTER button.
6. Press the or button to adjust “Hour”, then press the button to
move to the next step. Set other items using the same method as above.
hen finished, press the ENTER button to return.
7. Press the EXIT button to exit.
The first step is to set the television’s clock.
(refer to “Setting and Displaying the Current Time” on page 14)
You can also set hour and minute by pressing the number buttons on the remote control.
The "Activation" setting must be set to "On" in order for the timers to work.
Switching the Television On and O Automatically
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1. Press the MENU button to display the on-screen menu.
Press the or button to select “Setup”, then press the
ENTER button.
2. Press the or button to select “Language”,
then press the ENTER button.
3. Select a particular language by pressing the or button repeatedly.
Press the ENTER button.
You can choose one of two languages.
4. Press the EXIT button to exit.
Choosing Your Language
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 15

English-16
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to
continue viewing the poor picture, you must set the "Blue Screen"
mode to "Off".
1. Press the MENU button to display the menu. Press the or button to
select “Setup”, then press the ENTER button.
2. Press the or button to select “Blue Screen”
then press the ENTER button.
3. Press the or button to select “On” or “Off”.
Press the ENTER button.
4. Press the EXIT button to exit.
Setting the Blue Screen Mode
You can select among external sources connected to
your TV’s input jacks.
1. Press the MENU button to display the menu.
Press the ENTER button to select “Input”.
2. Press the ENTER button to select “Source List”.
3. Select the required device by pressing the or button.
Press the ENTER button.
Selecting the Source
Press the SOURCE button on the remote control to toggel between all the available
source. TV mode can be selected by pressing the TV or P/ button on the
remote control but you cannot select it by pressing the SOURCE button.
Name the device connected to the input jacks to make your input
source selection easier.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Input”.
2. Press the or button to select “Edit Name”, then press the
ENTER button.
3. Press the or button to input select input source that you wish to edit.
Press the ENTER button.
4. Press the or button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
Editing the Input Source Names
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 16

English-17
Most set channels carry “ teletext ”, pages of written
information that provide information such as:
Television programme times.
News bulletins and eather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
Teletext Decoder
You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1. sing the P( ) or P( ) button, select the channel providing the
teletext service.
2. Press the TTX/MIX ( ) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed at any time by pressing
the MENU ( ) button.
3. Press the TTX/MIX ( ) button again.
The actual broadcast will be displayed simultaneously with the teletext page
on the screen.
4. Press the TV( ) button to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the
Text language is identical with the language in the “Setup” menu mode. If both languages
are different, select the same language with the Text language on the “Setup” menu.
Displaying t e Teletext Information
BN68-01013B-X1Eng.qxd 2/15/06 3:55 AM Page 17

English-18
Press the number buttons on the remote control to enter the page
number directly:
1. Enter the three-digit page number listed in the contents by pressing the
corresponding numeric buttons.
2. If the selected page is linked with several secondary pages, the secondary
pages are displayed in sequence. To freeze the display on a given page,
press the
() . Press the () button again to resume.
3. Using the various display options:
To display...
Both teletext information and the normal broadcast
Hidden text (answers to quiz games, for example)
The normal screen
A secondary page, by entering its 4-digit number
The next page
The previous page
Double-size letters in the:
Upper half of the screen
Lower half of the screen
Normal screen
Press the...
TTX/MIX ( )
INFO ( )
INFO ( )
DUAL I-II ( )
P ()
P ()
()
Once
Twice
Three times
Selecting a Speci ic Teletext Page
The various topics included in the teletext pages are colour-coded, and can
be selected by pressing the coloured buttons on the remote control.
1. Display the teletext contents page by pressing the
TTX/MIX () button.
2. Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
3. Press the Red button to display the previous page.
Press the Green button to display the next page.
4. Press the TV ( ) button again to exit from the Text display.
Using Fastext to Select a Teletext Page
You can store up to four teletext pages to display them later at leisure.
1. Select the LIST mode using the SOURCE () button.
The SOURCE () button is used to switch between the LIST and FLOF modes.
2. Press the coloured button corresponding to the page that will be replaced.
3. Enter the new page number using the numeric buttons.
4. Repeat steps 2and 3for each page to be stored, using a different
coloured button each time.
5. Press the SLEEP ()
button until the corresponding blocks blink.
Storing Teletext Pages
BN68-01013B-X1Eng.qxd 2/14/06 2:27 AM Page 18