
VESA Wall Mount Kit Notes and Specifications
~
Install your wall mount
on
a solid wall perpendicular
to
the floor. Before attaching the wall mount
to
surfaces other than plaster board, please contact your nearest dealer for additional information. If you
install the
TV
on a ceiling
or
slanted wall, it may fall and result in severe personal injury.
~
NOTE
• Standard dimensions for wall mount kits
are
shown
in
the table below.
• Samsung wall mount kits contain a detailed installation manual and
all
parts necessary for assembly
are provided.
• Do not use screws that
do
not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length or
do
not comply with the VESA
standard screw specifications. Screws that are
too
long may cause damage
to
the inside ofthe TV
set.
• For wall mounts that
do
not comply with the VESA standard screw specification
s,
the length
of
the
screws may differ depending on the wall mount specifications.
• Do not fasten the screws too firmly. This may damage the product
or
cause the product
to
fall
,
leading
to
personal injury. Samsung
is
not liable for these kinds
of
accidents.
• Samsung
is
not liable for product damage or personal injury when a non-VESA
or
non-specified
wall mount
is
used
or
the consumer fails
to
follow the product installation instructions.
• Do not mount the TV at more than a 15 degree tilt.
• Always have
two
people mount the TV on a wall.
26
10
0X
100
M4
LED
-
TV
32
-
40
200
X
200
M6 4
46-60
400
X4
00
MS
~
Remove the screws in the mounting holes before you install the wall mount.
Do not install your
Wall
Mount Kit while your TV
is
turned on. It may result
in
personal
injury
due
to
electric sh
oc
k.
Installing a Wall Mount from Another Manufacturer
To
install a wa
ll
-mount from another manufacturer, use the Holder-
Ring.