Samsung 5000 Series User manual
❑The Channel List Tools Menu
t
The Channel List Tools menu contains most of the functionsyou can use on the
All Channels, Added Channels, and Favorite Channels List screens. To view,
select a list screen, select a channel, and then press the TOOLS button.
■
Add / Delete: Delete a channel from or add a channel to the Added Channels list.
To delete channels from the Added Channels list, followthese steps:
1. Select one or more channels in the Added Channels
buttons and the YellowSelect button on your remote.
2. Press the TOOLS button on yourremote. The Tools menu appears.
3. Select Delete in the Tools menu, and then press the ENTER
E
button.
To add channels to the Added Channels list, follow these steps:
1. Select one or more channels in the All Channels
buttons and the YellowSelect button on your remote.
2. Press the TOOLS button on yourremote. The Tools menu appears.
3. Select Add in the Tools menu, and then press the ENTER
E
button.
✎All dele ted channel s will be shown on th e AllC hannels list. You a dd
channe ls back to the Added Ch annels list on the A llC hannels list.
✎A gray- colored chann el indicates t he channel has b een deleted f rom
the Added Channels list.
✎The Add men u option only app ears for dele ted channels .
■
Add to Favorite/Deletefrom Favorite: Lets you add channels to and delete
channels from your Favorite Channels list.
To add channels to the Favorite Channels list, follow these steps:
1. Select one or more channels in the All Channels
buttons and the YellowSelect button on your remote.
2. Press the TOOLS button on yourremote. The Tools menu appears.
3. Select Add to Favorite in the Tools menu, and then press the ENTER
E
button.
To delete channels from the Favorite Channels list, follow these steps:
1. Select one or more channels in the Favorite Channels
buttons and the YellowSelect button on your remote.
2. Press the TOOLS button on yourremote. The Tools menu appears.
3. Select Delete from Favorite in the Tools menu, and then press the
ENTER
E
button.
■
TimerViewing: You can schedule a channel to be displayed automatically at
a set time, even when you are watching another channel. You must set the
Time > Clock function to use TimerViewing.
To schedule a channel, follow these steps:
1. Select a channel in the Added Channels
the Yellow Selectbutton on your remote.
2. Press the TOOLS button on yourremote. The Tools menu appears.
3. Select TimerViewing in the Tools menu, and then press the ENTER
E
button. The Timer Viewing screen appears.
4.
buttons to change the entries. Where numbers are displayed, you can
also enter numbers directlyusing the number keypad on yourremote.
✎If you se lect Everyday or Every We ek, the date yo u select in th e
Date fi eld becomes t he start dat e for your sched uled viewing.
For Everyday, the T V will turn on eve ry day, at the time yo u
selec ted, star ting from tha t date. For Every We ek, the TV wi ll
turn on ev ery week, on t he same day of th e week as the st art
date you s elected, a t the time you sel ected, from t hat day on. If
you sele ct Once, the TV w ill turn on once, o n the date and time
you selected .
5. Press the ENTER
E
button on your remote when done.
✎Only Added Channels can be sch eduled.
✎Sched uled program s and channels a re displayed in t he Programmed
List.
✎
digita l program lis t. If you highlig ht a program in the l ist, and then
press t he ENTER
E
(Schedule) but ton, you set Timer V iewing for
that program directly.
■
Channel Name Edit: Analog channels only. Lets you assign a name of up to
■
Select All: Select all the channels in the displayed channel list.
■
Deselect All: Deselect all the selected displayed channels.
✎You can only s elect Deselect All when on e or more channe ls are
selected.
■
Auto Program: See Auto Program under Memorizing Channels.
Programmed List (on the Channel List Screen)
The Programmed list displays the channels and programs you have scheduled
forviewing using the TimerViewing function. You can view, modify, ordelete a
show you have scheduled using the functions on the Programmed List screen
Tools menu.
Programmed List Screen Tools Menu
t
■
Change Info: Change the scheduling information fora show or channel you
have scheduled.
To change the information, follow these steps:
1. Select the Programmed List icon on the left side of the Channel List
screen, and then press the ENTER
E
button.
2. On the Programmed List screen, select the show orchannel entry you
want to change, and then press the TOOLS button. The Tools Menu
appears.
3. Select Change Info, and then press the ENTER
E
button. The Timer
Viewing screen appears.
4.
buttons to change the entries. Where numbers are displayed, you can
also enter numbers directlyusing the number keypad on yourremote.
5. Press the ENTER
E
button when done.
■
Cancel Schedules: Cancel a show orchannel you have scheduled.
To cancel a scheduled showor channel, follow these steps:
1. Select the Programmed List icon on the left side of the Channel List screen,
and then press the ENTEREbutton.
2. On the Programmed List screen, select the show orchannel entry you want to
cancel, and then press the TOOLS button. The Tools Menu appears.
3. Select Cancel Schedules, and then press the ENTEREbutton. The Cancel
Schedules screen appears.
4. Select OK, and then press the ENTEREbutton.
■
Information: Display the information for a show orchannel you have scheduled.
You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the Channel List screen,
and then press the ENTEREbutton.
2. On the Programmed List screen, select the show orchannel entry you want
information for, and then press the TOOLS button. The Tools Menu appears.
3. Select Information, and then press the ENTEREbutton. The TimerViewing
Info screen appears.
4. Select Change Info, and then press the ENTEREbutton to change
information, or select Close, and then press the ENTEREbutton to close the
Information screen.
■
Select All / Deselect All: You can select ordeselect all channels in the channel list.
❑Other Channel Menu Functions
Channel Mode (Added Channels/Favorite Channels)
Lets you select the channel list displayedwhen you press the <CH>
you will only see Favorite channels when you pressthe <CH>button.
Fine Tune
Analog channels only.
done automatically during the search and store operation. If the signal is weak
✎Selec t the channel , and then sele ct Fine Tune.
✎Fine tu ned channels t hat have been s aved are marked w ith an asteri sk
“*” on t he right-hand si de of the channel n umber in the chan nel banner.
✎To reset f ine-tuning, s elect the ch annel, sele ct Fine Tune, and th en
selec t Reset on the Fine Tune screen.
Setup Menu
Plug & Play
Lets you re-run the Plug & Play initial setup procedure. For instructions, see
Language
Set the menu language.
✎Choose between English, Español,and Fran çais.
❑Setting the Time
Time
✎The tim e you set will appe ar when you pres s the INFO button.
■
Clock: Set the clock so you can use thevarious timer features of the TV.
✎If you dis connect th e power cord, you h ave to set the clo ck again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTEREand select Auto or Manual, and then press ENTEREagain.
If you selected Auto:
The TV will automaticallydownload the correct time from a digital channel.
Select Time Zone, and then press the ENTERE
buttons to select your Time Zone, and then press ENTERE.
Select DST (Daylight Savings Time), and then press ENTERE. Select On
if you want toturn the DST adjustment on and off manually. Select Off to
turn off the DST adjustment. Press ENTEREwhen done.
✎The DST and Time Zone f unctions ar e only available w hen the Clock
Mode is set to Auto.
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks simultaneously (for
✎You can only s elect a langu age from among t he ones being br oadcast .
Multi-Track Sound (MTS)
Analog channels only.
■
Mono: Select for channelsthat are broadcasting in mono or if you are
■
Stereo: Select forchannels that are broadcasting in stereo.
■
SAP: Select to listen to the Separate AudioProgram, which is usually a
foreign-language translation.
✎Depen ding on the prog ram being broad cast, you ca n listen to Mono,
Stereo or SAP.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed digital
audio signal when you connect the digital audio jack on the back ofthe TV to
a digital audio in jack on a receiver orhome theater.
■
Audio Format: You can select the DigitalAudio output (SPDIF) format. The
available Digital Audio output (SPDIF) format maydiffer depending on the
input source.
■
Audio Delay: Lets you correct timing mismatches between the audio track
and the video when you are watching the TV and l istening to digital audio
When you select Audio Delay, a slider appears. Use the left and right arrow
buttons to adjust the slider. Press ENTER
E
when done (0ms ~ 250ms).
Visually Impaired
(digital channels only)
Adds a verbal description to the main audio tohelp the visually impaired.
Dolby Digital Comp
Sets Dolby Digital compression mode.
HDMI Audio Format
differ depending on the input source.
Sound Reset
■
Reset All: Resets all sound settings to the factory defaults.
Channel Menu
❑Memorizing Channels
Plug & Play, the TV memorized the
channels that were available over the air orthrough your cable system and
added them to the Channel List. The Antenna and Auto Program functions
described below let youre-run the channel memorization function without
having to re-run the Plug & Play procedure.
Antenna (Air / Cable)
Before yourtelevision can memorize the available channels, you must
select yourTV's signal source, Air (using an antenna) or Cable. Select Menu >
Channel > Antenna > Air or Cable. Afteryou have selected the signal source,
go on to the Auto Program function.
✎Selec ting the signa l source using th e Antenna function al so
receiv e your TV signal ov er the air, and you sele ct Cable, you will s ee
only snow. You mu st select A ir to see a pict ure.
Auto Program
The Auto Program function memorizes all channels that are available over the air
or throughyour cable system and adds them to the Channel List. If you are using a
Auto Program function.
To start Auto Program, follow these steps:
1. Push MENUmChannelAuto ProgramENTEREon yourremote. The
Antenna Source screen appears.
2. On the Antenna Source screen, select the source of yourTV signal.
Air
If your TVis connected to an antenna choose Air, and then press ENTERE. The
TV will automaticallystart memorizing channels.
Cable
If yourTV is connected to a cable outlet, choose Cable, and then press
ENTERE.
Auto
If you choose Auto, and then press ENTERE, the TV will automatically
3.
digital and analog cable systems you have: STD, HRC, or IRC. Most systems are
STD (Standard). When done, select Start, and then press ENTERE. The TVwill
start memorizing channels.
✎Channe l memorizat ion can take up to 45 mi nutes, depe nding on your
cable system.
✎Memor ized channel s are added to the Ad ded Channels list. T hese are the
channe ls you will see w hen you use the Ch annel butto ns on your remote .
Clear Scrambled Channel
Auto Program is
completed. This process maytake up to 20~30 minutes.
✎Press t he ENTER
E
butt on to stop the Clear Sc rambled Channel.
✎This fun ction is only av ailable in Cable mode.
❑Managing Channels
Channel List
See yourl ist ofAdded channels, Favorite channels, or channels you've
scheduled forviewing. Add or delete Favorite channels, add ordelete
channels from the Added Channels list, schedule channels or programs for
viewing. Watch a channel byselecting the channel in the All Channels, Added
Channels, or Favorite Channels
pressing the ENTER
E
button.
Channel List Screens icons are listed on the left side. Select an icon usingthe
buttons to view each list.
■
All Channels: Shows all currentlyavailable channels including those
you deleted from the Added Channels list.
■
Added Channels: Shows all Added Channels. These are the channels
■*
Favorite Channels: Shows all favorite channels.
■
Programmed: Shows all channels and programs currently scheduled
using TimerViewing.
✎Remote c ontrol but tons active o n the Channel List screen.
xZoom): Enlarges or shr inks a channel number.
xYellow (Select): Move the cursor to a channel. P ress the Yellow
button to sele ct the channel . A
c
mark appears. Repeat to
selec t additional channels. Then , open the Tools men u and
apply a function to the channels yo u selected.
x
T
(Tool s): Displays t he ChannelL ist Tools menu. (The Too ls
menus may differ depending on the situation.)
✎ Channel List
or the Channel List func tions.
Display Icons Used in the Channel List Screens
Icons Meaning
c
A selected channel.
*
A Favorite channel.
)
A reserved program.
(
A program currentlybeing broadcast.
The On Screen Menus
Your TVhas two kinds of menus, the Main menu and the various Tools menus.
The Main menu gives you access to most orall of the menu options available
on your TV. The Tools menus displaya selected number of frequently used
menu options that change depending on the screen you areviewing. A Tools
menu symbol (T) in the lower right side of the screen indicates that a Tools
menu is available.
The Main menu has seven primary categories:
yPicture yInput
ySound yApplication
yChannel ySupport
ySetup
To viewthe Main menu, press the MENU button on your remote. To view a
Tools menu, press the TOOLS button on your remote.
✎The men u options that a ppear in the Main m enu depend on t he Source
source, t he Channel ca tegory will n ot appear. To see the Ch annel
categ ory, you must f irst selec t TV in the Sour ce List.
The Menu options are presented below,arranged by Main menu categories.
A Tools button symbol(
t
)
option is also available in one of the Toolsmenus.
Picture Menu
Mode
t
Select your preferred picture mode.
✎When you r TV is connec ted to a PC, you c an only selec t Entertain and Standard.
■
Dynamic: Brightens the screen. Suitable fora bright room.
■
Standard: Suitable fornormal room brightness.
■
Movie: Darkens the screen, making it less glary. Suitable for watching movies in a
darkened room.
■
Entertain: Sharpens the picture. Suitable forgames.
✎Only avail able when the TV i s connected t o a PC.
Backlight / Contrast / Brightness / Sharpness / Color/ Tint (G/R)
■
Backlight: Adjusts the brightness of the screen byadjusting the brightness of the
■
Contrast: Increases ordecreases the contrast between dark and light areas of the
picture.
■
Brightness: Adjusts the brightness of the screen. Not as effective as Backlight.
■
Sharpness: Sharpens or dulls the edges of objects.
■
Color: Adjusts the colorsaturation. The higher the Color setting, the more intense
the color. Low settings remove colorand the picture becomes black, white, and gray.
■
Tint (G/R): Adjusts the amount of green and red in the picture. As you increasethe
amount of green, the amount of red decreases and viceversa.
✎When th e TV is connec ted to a PC, you c an only make chang es to Backlight,
Contrast, Brightness, and Sharpness.
Picture Options
✎When th e TV is connec ted to a PC, you c an only make chang es to the Color Tone,
Size, and HDMI Black Level.
■
Color Tone (Cool / Standard /Warm): Cool makes the picture bluer (cooler). Warm
makes the picture redder(warmer).
✎Warm is deac tivated wh en the picture m ode is set to Dynamic.
■
Size: Set the size and aspect ratio of the picture on the screen.
16:9
Zoom1
cut off.
Zoom2
Wide Fit
4:3
and left of the picture.
✎
retent ion (screen b urn) which is not co vered by the warr anty.
Screen Fit: Displays the full image without any cut-off when your TV is
signals.
✎
✎
connec ted to an input o n the TV. Pictu re Sizes availa ble by Input
Source a re listed belo w:
Custom
Input Source Picture Size
16:9,Zoom1,Zoom2, 4:3
16:9,Wide Fit, 4:3,Screen
Fit
■
Digital Clean View (Off / Low / Medium / High / Auto) : If the broadcast signal
received byyour TV is weak, you can activate the Digital Clean View feature to
reduce any static and ghosting that mayappear on the screen.
✎When th e signal is weak, t ry all the Digi tal Clean View o ptions until t he
TV disp lays the bes t picture.
■
HDMI Black Level (Normal / Low)
adjust the screen depth. Low make blacks look darker.
✎Availab le only in HDMI
■
Film Mode (Off / Auto1 / Auto2) : Sets the TV to automaticallysense and process
✎
■
Motion Lighting (Off / On): When on, the TVautomatically dims the screen's
displaying dark scenes - to reduce powerconsumption. The backlights are
returned to full brightness when the TV displays bright scenes.
Picture Off
the power keyor volume button to turn on the screen.
Picture Reset
■
Picture Reset (Reset Picture Mode/Cancel): Resets the picture settingsto
their factory defaults.
Sound Menu
Mode
t
■
Standard: Selects the normal sound mode.
■
Music: Emphasizes music overvoices.
■
Movie: Provides the best sound formovies.
■
ClearVoice: Emphasizes voices over other sounds.
Equalizer
Available in Standard sound mode only.
■
Balance L/R: Adjusts the balance between the right and left speaker.
■
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
■
Reset: Resets the equalizer to its defaultsettings.
Auto Volume
Automatically adjusts the volume level when you change video sources or
content so the level remains the same.
Speaker Select
If you are listening to the sound trackof a broadcast or movie through an
decoding speed between the TV’s speakers and the speakers attached toyour
audio receiver. If this occurs, set the TV to External Speaker.
✎When you s et Speaker Se lect to External Speaker, the T V’s speakers
When you s et Speaker Se lect to TV Sp eaker both th e TV’s speak ers and
✎When Sp eaker Selec t is set to External Speaker, the VOLUME and MUTE
butt ons will not ope rate and the sou nd setting s will be limited .
✎
speake rs will be mute.
Important Safety Instructions
Warning! Important Safety Instructions
(Please read the SafetyInstructions before using yourTV.)
CAUTION Class II product: This symbol indicates that a safety
connection to electrical earth (ground) is not
required.
AC voltage: Rated voltage marked with this symbol is
AC voltage.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
DC voltage: Rated voltage marked with this symbol is
DC voltage.
This symbol indicates that this product has included
important literature concerning operation and
maintenance.
Caution. Consult instructions for use: This symbol
instructs the user to consult the user manual for
further safety related information.
The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this
apparatus and to protect it from overheating, these slots and openings must never be blocked orcovered.
✎Do not place this apparatus in a confined space, such as a bookcase orbuilt-in cabinet, unless proper ventilation is provided.
✎
✎Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire orelectric shock.
swimming pool, etc.). If this apparatus accidentallygets wet, unplug it and contact an authorized dealerimmediately.
This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries
properly. Please contactyour local authorities for disposal orrecycling information.
Power-supply cords should be placed so that they are not likely to be walked on orpinched by items placed upon or against them. Pay particular
To protect this apparatus from a lightning storm, or when left unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent damage to the set dueto lightning and power line surges.
Before connecting the AC power cord to the DC adaptoroutlet, make sure that the voltage designation of the DC adaptorcorresponds to the local
electrical supply.
Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
plug. Never unplug it bypulling on the power cord. Do not touch the power cord with wet hands.
If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and
contact an authorized dealer orservice center.
(especiallywhen children, elderly, or disabled people will be left alone inthe house).
✎Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or by
causing the insulation to deteriorate.
Be sure to contact an authorized Samsung service centerfor information if you intend to install your TV in a location with heavy dust, high or low
temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failure to do
so may lead to serious damage toyour TV.
Use only a properlygrounded plug and wall outlet.
✎An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To turn off this apparatus completely, disconnect it from thewall outlet. To ensure you can unplug this apparatus quickly if necessary, make sure
that the wall outlet and powerplug are readily accessible.
Store the accessories (batteries, etc.) in a location safely out of the reach of children.
Do not drop or strikethe product. If the product is damaged, disconnect the powercord and contact a Samsung service center.
To clean this apparatus, unplug the power cord from the wall outlet and wipe the product with a soft, dry cloth. Do not use any chemicals such as
erase the printing on the product.
Do not short-circuit, disassemble, oroverheat the batteries.
equivalent type.
AND
PRODUCT ATALL TIMES.
Use care when touching the TVafter it has been on for some time. Some parts can bewarm to the touch.
- 5 -
Getting Started
Accessories
Input Cables (Sold Separately)
Audio
Composite (AV)
Component
✎Make sure you havethe correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.
Cable Plugs Ports/Jacks Do not plug in opposite orwrong direction. It could
damage the TV port.
HDMI
USB
Optical
Do not plug cables in upside down. Be sure to check the orientation
of the plug before plugging it in.
TV Controller
The TV's Controlleron the bottom right side of the TV,lets you control the TVwithout the remote control.
: Turns the TV on oroff.
: Changes channels.
: Adjusts the volume.
: Displays and selects the available video sources.
Control Menu
✎The pro duct color and s hape may vary de pending on the m odel.
✎You cannot input the numbers by pressing the TV's controller.
✎If you press it first, the control menu appears. You can select the function bypressing and holding the TV's controller.
✎
and switching the input source.
Plug & Play (Initial Setup)
Press the POWER button. Plug & Play is available onlywhen the Input source is set to TV. Set the initial setupfollowing instructions that the TV
guides.
✎Connecting the powercord and antenna. (referto ‘Connections’)
Owner’s Instructions
Power Cord
Connections
For the best picture and audio quality, connect digital devices using
date, request an upgrade.
may not display ora connection error may occur.
PC/DVI AUDIO IN input is not supported.
HDMI IN 2
(DVI) port.
depending on the PC.
HDMI IN 2 (DVI) port,
the audio does not work.
recommend you to connect the HDMI IN1 (STB) port.
WR
R W
AUDIO OUT
R-AUDIO-L
COMPONENT OUT
PRPBY
R B
R B RG
R
G
ANT OUT
OPTICAL
AUDIO OUT
R-AUDIO-L
VIDEO OUT
WR Y
R R
Y
W
DVI OUT
HDMI OUT
TV Rear Panel
TV Side Panel
VCR
AVDevice ( 2)
Blu-ray player
AV Device (3)
Using a Component Cable (up
AVDevice ( 1)
Media Play
Using a USB Drive
Audio Device
Using an Optical (Digital) Cable
Digital Audio System
PC
speakers for audio.
PC
or
Cable
Remote Control
✎The button names above may differfrom the actual names.
✎Some buttons on the remote control maynot be available.
✎This remote control has Braille points on the Power, Channel, Volume, and Enter buttons and can be used byvisually impaired persons.
Display Modes (HDMI/DVI Input)
Mode Resolution
Frequency
Vertical
Frequency
Frequency
Sync Polarity
IBM
c
c
MAC
35.000 30.240
c
c
100.000
c
VESA DMT
c
31.500
c
31.500
c
40.000
c
50.000
c
c
c
c
c
c
45.000
c
c
c
135.000
c
c
c
c
c
c
Installing batteries (Battery size: AAA)
✎NOTE
Use the remote control within 23 feet from TV.
Bright light may affect the performance of the remote control.
The Color and shape mayvary depending on the model.
MEDIA.P SLEEP
to the directions on the TV's screen.
Use these buttons according to the directionson
the TV's screen.
Displays information on the TV screen.
Shuts off the TV automaticallyafter a preset period
of time.
Displays the main on-screen menu.
Changes channels.
Cuts off the sound temporarily.
Returns to the previous channel.
Displays and selects the availablevideo sources.
PIC SIZE: Changes the picture size.
MTS: Changes a program's audio to stereo, mono,or
Separate Audio Program(SAP broadcast).
CC: Controls the caption decoderand displays captions
on the screen.
Returns to the previous menu.
Moves the cursor,selects the on-screen menu items,
and changes the values seen on the TV's menu.
Displays frequently used functions.
Displays Media Play.
Displays the channel list on the screen.
Adjusts the volume.
Selects additional digital channels being broadcast
channel ‘54-3’,press ‘54’, then press ‘-’ and ‘3’.
Press to access channels directly.
Turns the TV on oroff.
E
(Enter): Press this button to select or run a
focused item.
- 2 -- 1 -
- 5 -
- 3 -
- 4 -
Input Menu
Source List
1. Press the SOURCE button.
2.
■
TV / AV / Component / HDMI1 / HDMI2/DVI
Source List, connected inputs are highlighted.
How to use Edit Name
Edit Name lets you associate a device name to an input source, making it
easier to select a source. To access Edit Name, enter the Input menu, and
then select Edit Name. Select the name of the device fromthe drop down
✎
cable, y ou should sele ct PC mode in Edit N ame.
✎
to DVI cab le, you should se lect DVI PC mo de in Edit Name.
✎
DVI mo de in Edit Name.
LED TV
user manual
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design
Important Warranty Information Regarding Television
Format Viewing
✎
of the sc reen width to s creen height ) are primarily de signed to disp lay
wide screen format full-motion video. The images displayed on them
to fill t he screen if you r model offer s this feature a nd the images ar e
constantly moving. Displaying stationary graphics and images on
televi sion video and pr ogramming, sh ould be limite dt o no more than
5% of the to tal televisio n viewing per we ek. Additio nally, viewing
game disp lays, sta tion logos, w eb sites or compu ter graphics a nd
patt erns, should b e limited as de scribed abov e for all televisi ons.
cause u neven aging of LE D Displays tha t leave subtle, bu t permanent
burne d-in ghost ima ges in the LED pi cture. To avoid thi s, vary the
progra mming and image s, and primari ly display full sc reen moving
image s, not stati onary pat terns or dark ba rs. On LED mod els that
offe r picture sizin g features, u se these cont rols to view dif ferent
format s as a full scre en picture. B e careful in the s election a nd
durati on of televisio n formats you u se for viewing. U neven LED agin g
as a resul t of format sele ction and us e, as well as burne d-in images ,
are not cov ered by your Sam sung limited wa rranty.
Still image warning
news bars at screen bottom etc.) on the screen. Constant displaying of still
pictures can cause ghosting of LED screen, whichwill affect image quality. To
reduce risk of this effect, please follow below recommendations:
yAvoid displaying the same TV channel for long periods.
yAlways tryto display any image on full screen, use TV set picture format
menu for best possible match.
yReduce brightness and contrast valuesto minimum required to achieve desired
yFrequently use all TVfeatures designed to reduce image retention and
screen burnout, referto proper user manual section fordetails.
Securing the Installation Space
Keep the required distances betweenthe product and other objects (e.g. walls) to
ensure proper ventilation.
the internal temperature of the product.
✎When usin g a stand or wall -mount, use p arts provi ded by Samsung E lectronic s only.
xIf you use p arts prov ided by anothe r manufactu rer, it may result in a pro blem with
the prod uct or an injur y due to the produ ct falling.
✎The appe arance may dif fer dependin g on the produc t.
✎Be care ful when you cont act the TV b ecause som e parts can b e somewhat ho t.
Installation with a stand. Installation with a wall-mount.
4inches
4inches
4inches
4inches
4inches
4inches
4inches
Contact SAMSUNG WORLD WIDE
If you have any questions orcomments relating to Samsung products,
Country CANADA U.S.A
Address
Samsung Electronics Canada Inc.
2050 Derry Road West
Canada
Samsung Electronics
America, Inc.
Customer Care
Center
Web Site
(English)
support (French)
support
-01
Troubleshooting
Problem Possible Solution
Flickering and Dimming
features off or on.
yEnergy saving : MENUSetup Eco Solution Energy Saving Select Settings
yEco Sensor : MENUSetup Eco Solution Eco Sensor
✎This fun ction may not b e available, de pending on the m odel.
Screen Color
Diagnosis Test on the TVto make sure there are no device issues.
ySelf Diagnosis : User MenuSupportSelf DiagnosisPicture Test
yIf the test is ok, try making sure ;
y
used the AVOut jack on your video source.
y
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video
source to the blue Pb jack on the TV, the red Pr jack on the source to the red Prjack on the TV, etc.
Screen Brightness
settings you should check before calling for a repair.
y
adjusting these options.
Unwanted Powering off If your Samsung TV appears to turn off byitself, there may be an issuewith either your Timersettings or your Eco
friendly No Signal PowerOff feature.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fallasleep with the TV still on
knowing that it will turn off aftera certain period of time and not waste energy.
ySleep Timer :User Menu Setup Time Sleep Timer
If the Sleep Timer is not activated,you may have engaged the No Signal Power Off or Auto Power Off feature.
yNo Signal Power Off :UserMenu Setup EcoSolution No Signal Power
yAuto PowerOff : User Menu Setup Eco Solution Auto Power Off
Trouble Powering On Before you turn the TV on, nd the red light on the right or left bottom of your TV. Press the power on button on
the TV or remote and the light should blink about 5 times before the TV turns on.
before making a call to the service department.
yIf you happen to be using the TVas a monitor and the stand-by light only blinks fora few seconds when you
press the powerbutton, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you’re sureyour power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
Stand Assembly If you have anytrouble assembling the stand, refer to “Install the Stand” in the Start Up orStand Installation
Re-run Plug & Play orrun Auto Program. (go to MENU - Channel - Auto Program)
Poor Picture First, perform the Picture Test and to see if your TVis displaying the test image properly.
MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture maybe caused by the source or signal.
The TV image does not look as good as
it did in the store.
✎
scale d SD content is low.
The picture is distorted has macroblock
Compression of video contents maycause picture distortion, especially on fast moving pictures such as those in
sports and action movies.
A weak signal can cause picturedistortion. This is not a TV problem.
Mobile phones used close to the TV (within 3.3ft) maycause noise in the picture on analog and digital channels.
The color is wrong or missing. If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
There is poor color or brightness. Adjust the Picture options in the TV menu. (go to Picture Mode / Color/ Brightness / Sharpness)
Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
Try resetting the pictureto the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of
the screen.
If the picture size is set to Screen Fit
The picture is black and white.
1 on the TV.
When changing channels, the picture
freezes or is distorted ordelayed.
Sound Problems Perform the Sound Test
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may be caused bythe source or signal.
There is no sound or the sound is too
The picture is good, but there is no
sound.
Reboot the connected device by reconnecting the device’s powercable.
The speakers are making an
inappropriate noise.
Check the cable connections. Make sure avideo cable is not connected to an audio input.
For Antenna or Cable connections, check the signal information.A weak signal may cause sound distortion.
Perform the Sound Test
No Picture, No Video
The TV will not turn on. Make sure the AC powercord is securely plugged into thewall outlet and the TV.
Make sure the wall outlet is working.
Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, referto ‘Remote control does not work’ below.
The TV turns off automatically. Ensurethe Sleep Timer is set to Off in the Time menu.
If your PC is connected to the TV, checkyour PC power settings.
Make sure the AC powercord is plugged securely into thewall outlet and the TV.
When you are watching TV connected to an antenna orcable connection, the TV will turn off after10 - 15 minutes
if there is no signal.
Make sure yourconnected devices are powered on.
Be sure to select the correct input sourceby pressing the SOURCE button on the remote control.
Reboot the connected device by unplugging andthen reconnecting the device's power cable.
RF (Cable/Antenna) Connection
The TV is not receiving all channels.
Run Auto Program toadd available channels to the channel list.
MENU - Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in
the menu. There are 3 options. (STD, HRC and IRC)
Verify the antenna is positioned correctly.
No Caption on digital channels. Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.
Some channels may not have caption data.
The picture is distorted: macroblock,
Compression of video contents maycause picture distortion, especially on fast moving pictures such as those in
sports and action movies.
A weak signal can cause picturedistortion. This is not a TV problem.
Others
and buzzing noise from the TV speakers
with Component cable connection.
The picture will not display infull
screen.
Black bars on the top and bottom appearwhen movies that have aspect ratios different from yourTV play on
the TV.
The remote control does not work.
Clean the transmission window located on the top of the remote control.
does not turn the TV on oroff, or adjust
the volume.
A “Mode Not Supported” message
appears.
resolution settings in this manual.
Caption on the TV menu is greyed out. You cannot select Caption
Component.
Caption
There is a plastic smell from the TV. This smell is normal and will dissipate in a few days.
TV Signal Strength is unavailable in the
Self Diagnosis Test menu.
TV is tilted to the right or left side. Remove the stand base from the TV and reassemble it.
The Channel menu is grey out
(unavailable).
The Channel menu is only availablewhen you select the TV source.
Your settings are lost after 30 minutes
or everytime the TV is turned off.
If TV is in the Store Demo mode, itwill reset audio and picture settings every 30 minutes. Please change from
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV
mode, go to MENUSetupPlug & PlayENTER
E
.
You have intermittent loss of audio
or video.
Check the cable connections and reconnect them.
connectors.
You see small particles whenyou look
closely at the edge of the frame of
the TV.
This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears
on the screen.
Select Home Use under Plug & Play mode. For details,refer to Plug & Play (Initial Setup).
✎
✎
✎Some fun ctions and pi ctures show n in this manual are a vailable on spe cific mode ls only.
✎ SupportDownloads). To
upgrad e, download the f irmware to your c omputer, copy the f irmware file to a U SB memory st ick, inser t the USB memor y stick into th e TV's USB sl ot, and then
selec t Support > S oftware Up grade in the TV 's menu.
Storage and Maintenance
✎If a sti cker was atta ched to the TV s creen, some d ebris can rema in after you re move the sticke r. Pleas e clean it befo re watching the T V.
✎
prevent scratches.
Do not spray water directly onto the product.
Any liquid that goes into the product may
Clean the product with a soft cloth
dampened with in a small amount of
benzene, thinners) or a cleaning agent.
License
your device setup menu.
the Symbol together are registered trademarks, and DTS 2.0 Channel is atrademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
or othercountries. © DTS, Inc. All Rights Reserved.
Manufactured under license from DolbyLaboratories.
Dolby, DolbyAudio and the double-D symbol are trademarks of Dolby Laboratories.
Open Source License Notice
Open Source used in this product can be foundon the following webpage.
Eco Solution
■
Energy Saving (Off/ Lo w / Medium / High): Letsyou adjust the brightness of
the TV to reduce powerconsumption.
■
Eco Sensor (Off / On): To enhance yourpower savings the picture settings will
automatically adapt to the light in the room.
✎This fu nction may no t be available, d epending on t he model.
✎If you a djust the Backlight fuction, Eco Sens or will be set t o Off.
Min. Backlight: When Eco Sensor is On, you can adj ust the minimum
screen brightness manually.
✎If Eco Sensor is On, the d isplay brigh tness may chan ge (become sli ghtly
darker in m ost cases) de pending on the s urrounding lig ht intensit y.
■
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets how quickly the TV
switches to standby mode, if no picture is being received.
✎Disab led when an att ached PC is in p ower saving mo de.
■
Auto PowerOff (Off / On): When Auto PowerOff is set to On, the TV will
automatically turn offwhen no user operation is detected for 4 hours.
Application Menu
Storage Class (MSC) device.
P
POWER
MEDIA.P
❑Connecting a USB Device
1. Turn on your TV.
2. USB
jack on the back of the TV.A pop up window appears.
3. Press the MEDIA.P button on your remote. The Media Play menu appears.
❑Using the Media Play Menu
To open Media Play in the Menu, follow these steps:
1. Press the MENUApplications
on the left, and then press the ENTEREbutton.
2. Media Play (USB), and then press the
ENTEREbutton.
3. Videos, Music, Photos, Settings),
and then press the ENTEREbutton.
✎Media Play might not wo rk properly wi th unlicensed m ultimedia fil es.
✎Read th e list below be fore using Media P lay (USB)
x
xCert ain types of USB Digital camera and audio d evices may not
be compa tible with this T V.
xMedia Play only suppor ts USB Mass Storage Class (MSC ) devices.
MSC is a Mass Storage Class Bulk-O nly Transport device.
Device s should be connected directly to the T V’s USB port . USB
xBefore connec ting your device t othe TV, ple ase back up your
responsible for any data f ile damage or data loss.
x
A USB device that requires high power (more than 0.5A) maynot be
supported.
xDo not disconnect the USB device while it is loading.
xThe higher the resolution of the image, the longer it takes to display
on the screen.
x
x
“Not Supported File Format” message appears.
xThe TV c annot play MP3 f iles with DRM that have been
downloaded from a for-pay si te. Digital Righ ts Managemen t
(DRM) is a te chnology that suppor ts the creation, dis tribution,
and manag ement of digital content in an integrated and
compreh ensive way, including protec ting the right s and interest s
of content providers, preventing illegal copying of contents, and
managing billing and set tlements.
xPTP (Pier to Pier) devices are not supported.
xIf an over-powerwarning message is displayed while you are
connecting or using a USB device,the device may not be recognized
or may malfunction.
Auto Protection Time
■
Auto Protection Time (Off / 2 hours / 4 hours / 8 hours /10 hours): If the
the screen saver is activatedto prevent the formation of ghost images on
the screen.
xIf the T V has no input during the time p eriod set in Auto
Protection Time, the S creen saver will run.
x
released automatically when yo ur connect the m to the TV.
x
xIf a USB device connected to the TV is not recognized, the list of
connect the USB device to a PC, format the device, and check the
connection.
xMedia
Play, use the “Empty the Recycle Bin” function on the PC to
xPhotos only supports the sequential jpeg format.
xThe Videos option does not suppo rt the scene search and
thumbnail functio ns.
x
some folders may not open.
x
one folder of a USB storage device is 1000.
xThe media may not play smoothly if you use a USB device rated
lower than USB 2.0.
Videos
1.In the Media PlayVideos, and then
press the ENTER
E
button.
2.
3. Press the ENTER
E
button or
∂
(Play) button.
- The file nam e is displayed on t he top of the scr een with the
playing time.
- If video tim e informatio n is unknown, pl aying time and th e
progre ss bar are not dis played.
- During vid eo playback , you can search u sing the
and
buttons.
✎In this mo de, you can play m ovie clips cont ained in a game, bu t you
canno t play the game it self.
ySupported Subtitle Formats
-
Name File extension
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD
SubStation Alpha . ssa
Advanced SubStation Alpha .ass
- Internal
Name Container Format
Xsub AVI Picture Format
SubStation Alpha MKV
Advanced SubStation Alpha MKV
SubRip MKV
MP4
ySupported Video Formats
File
Container Video Codec Resolution Frame
rate(fps)
Bit rate
(Mbps)
Audio
Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.3gpp
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.dat
AVI
MKV
ASF
MP4
MOV
FLV
VRO
VOB
PS
TS
MAX 30
Dolby
Digital
LPCM
ADPCM
(IMA, MS)
AAC
WMA
Dolby
Digital
Plus
DTS (Core,
LBR)
30
ASP
Window
Media Video
*.webm WebM 20 Vorbis
Other Restrictions
yCodecs may not function properly if there is a problemwith the content.
yVideo content will not play orwill not play correctly ifthere is an error in the
content or container.
y
TV’s compatibility ratings.
y
yWhen the TV is playing video over a network connection, the video maynot
play smoothly because of data transmission speeds.
y
yWhen the TV is playing a video at a bit rate of 10 Mbps orhigher, the menu
screens may be displayed slowly.
Video Decoder
Audio Decoder
audio is not supported.
Vorbis is supported forup to 2 channels.
Dolby Digital Plus is supported forup to 5.1 channels.
Music
1. In the Media Play menu, Music, and then
press the ENTER
E
button.
2.
3. Press the ENTER
E
button or
∂
(Play) button.
✎
✎
�
(REW ) and
µ
(FF) bu ttons do not f unction dur ing play.
✎
✎If the so und is abnorma l when the TV pl ays MP3 files , adjust the
Equalizer in the Sound me nu. (An over-mo dulated MP3 f ile may cause
a sound problem.)
Photos
1. In the Media PlayPhotos, then
press the ENTER
E
button.
2.
3. Press the ENTER
E
button or
∂
(Play) button.
✎NOTE
xWhile a pho to list is displayed, pre ss the
∂
ENTER
E
button on the re mote control to s tart a slide show.
xAll file s in the file list section will be displaye d in the slide show.
xDuring the slide show, files are displ ayed in order.
xDuring the slide show, you can a djust the slide show speed
using (�) (REW) or (µ) (FF ) button.
x
✎Media Play can play Mu sic files auto matically dur ing a Slide Show if
Background Music is set to On.
✎You cannot c hange the Mode in Background Music until t he
Backgr ound Music file h as finished lo ading.
ySupported Photo Formats
Image Photo Resolution
Base-line
Progressive
Other Restrictions
y
Playing Multiple Files
■
Playing selected video/music/photo les
1.
2.
✎NOTE
xA cmark appears to the left of the selected files.
xTo cancel a selection, pre ss the Yellow button again.
xTo deselect all selected files, pres s the TOOLS butt on, select
Deselect All , and then the ENTEREbutton.
3. Press the TOOLS button, select Play Selected Contents, and then press the
ENTEREbutton.
■
Playing a video/music/photo folder
1. With the folders on yourUSB device displayed, use the to
highlight a folder.
2. Press the TOOLS button, select PlayFolder, and then press the ENTEREbutton.
Media Play - Additional Functions
■
Videos/Music/Photos Play Option menus
TOOLS button.
Category Operation Videos Music Photos
Title
c
Repeat Mode
c c
Picture Size Youcan adjust the picture size to your preference.
c
Picture Mode Youcan adjust the picture setting.
c c
Sound Mode You can adjustthe sound setting.
ccc
Subtitle Settings
You can playthe video with Subtitles. This
function onlyworks if the subtitles have the same
c
Audio Format You can select the digital audio output format.
c
Audio Language Youcan change the audio language if the video
has more than one language.
c
Stop Slide Show /
Start Slide Show You canstart or stop a Slide Show.
c
Slide Show Speed Youcan select the slide show speed during
the slide show.
c
Background
Music
You can set and selectbackground music when
watching a Slide Show.
c
Zoom Youcan zoom into images in full screen mode.
c
Rotate Youcan rotate images in full screen mode.
c
Information Youcan see detailed information about the
ccc
Settings
Using the Setup Menu
■
DivX® Video On Demand: Shows the registration code authorized
for the TV. If you connect to the DivX web site and register
with the 10-digit registration code, you can download the
registration is completed.
✎
■
Information: Select to view information about the connected USB
device.
❑Using Sports Mode
t
This mode provides optimized conditions forwatching soccer and other
sports.
y
A
(Zoom
part to zoom it in.
✎When Sports Mode i s On, the picture an d sound modes a re set to
Stadium automatically.
✎If you tur n the TV off w hile Sports Mode is on, Sports Mode is t urned
off.
Support Menu
Self Diagnosis
■
Picture Test: Use to checkfor picture problems. If the problem appears in
the test picture, select Yes andfollow the directions on the screen.
■
Sound Test: Use the built-in melody sound to check forsound problems.
If the problem occurs during the test, select Yes and follow the directions
on the screen.
■
Signal Strength
is either perfect orthe channels are unavailable. Adjust yourantenna to
increase signal strength.
■
Reset: Reset all settings to the factory defaults.
✎The PIN i nput screen ap pears befo re the setup scr een.
✎Enter yo ur 4-digit PI N. Change the P IN using the Change PIN
option.
Software Upgrade
Software Upgrade
from samsung.com to a USB memory device.
Use Mode
You can turn the TV into a display model for retail environments by setting
Use Mode to Store Demo.
✎For all ot her uses, se lect Home Use.
✎With Store Demo, so me function s are disabled , and the TV
automa tically rese ts itself a fter a prese t amount of time.
If you selected Manual:
The Clock Set
ENTER
E
.
✎Availab le only when Clock Mode is se t to Manual.
■
Sleep Timer
t
✎To cancel th e SleepT imer, s elect Off.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you select. You can
✎You must se t the clock fir st.
■
On Time / Off Time
OnTime and Off Time
Activate.
■
Volume: Set the desired loudness.
■
Contents: To select what will be turned on when the timer setting is
Use the
ENTER
E
button. The Contents screen appears. Use the
buttons to change the values in
- TV/USB: Select TV or USB. The USB device must be connected toyour TV
before you can select USB.
- Antenna: Displays the current antenna source, Air or Cable.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB,follow these steps to select a
✎
folder s, in one folde r of a USB storag e device is 1000.
✎The med ia may not play smo othly if you use a U SB device rate d
lower than USB 2.0.
1. Music
under Photo, and then press the ENTER
E
button. The TV displays a
single folder (the Root folder) and the type or name of the device.
2. Press the ENTER
E
button. A list of folders on the device appears.
✎If ther e are no folders o n your device, pre ss the Yellow select
butt on to select t he Root folder, and t hen press the RE TURN
butt on. The Timer screen re-appears.
3.
photos, and then press the Yellow select button to select the folder.
4. Press the RETURN button. The Timer screen re-appears.
■
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can select the days you want to activate the
the ENTER
E
button. To unselect a day, highlight it, and then press the
ENTER
E
button.
either the ENTER
E
or RETURN button.
❑Other Features
Voice Guide (On/Off)
You can activate voice guides that describe the menu options aloud to aid the
visually impaired.
■
Voice Guide
provided in the current language.
■
Volume: Set the volume ofthe voice guide.
■
Pitch: Set the pitch of the voice guide.
■
Speed: Set the speed of the voice guide.
Game Mode (On/Off)
Game Mode
function.
✎Precautions and limitations for game mode:
xBefore you disconnec t the game console and conne ct another
Game Mode to Off in the set up menu.
xIf you disp lay the TV menu in Game Mode, the screen shakes slightly.
✎Game Mode is not avai lable when the i nput source is se t to TV.
✎Afte r connecting t he game consol e, set Game Mode to On. You may
notice slightly reduced picture quality.
Program Rating Lock
The Program Rating Lock feature letsyou block programs you've determined
are inappropriate foryour children based on the program'sratings. To access the
Program Rating Lock feature and makeany changes, you must enter a PIN (personal
✎Program Rating Lock is n ot available in HDMI or Component mode.
✎The def ault PIN number o f a new TV set is “0 -0-0 -0”. You can set yo ur own
PIN usin g the Change PIN function.
How It Works
When you access the Program Rating Lock
screen appears. Enter 0-0-0-0. The PIN screen closes and the Program Rating Lock Menu
appears. Every time you access the Program Rating Lock functions, the PIN screen will
appear and you must enter a PIN.
When the Rating Lock screen appears, select Program Rating Lock,and then press
ENTERE. Select On, and then press the ENTEREkey again. Depending on what type of
programs or moviesyou want to block, select one of the options on the screen, and then
press the ENTEREbutton. The options are listed below:
■
TV Parental Guidelines: You can block TV programs based ontheir ratings. This function
allows you to control what your children are watching.
■
MPAA Rating: You can block movies based on theirMPAA ratings. The Motion Picture
Association of America (MPAA) has implemented a rating system that provides parents
■
Canadian English: You can block TV programs based on their Anglophone Canadian ratings.
■
Canadian French: You can block TVprograms based on their French Canadian ratings.
■
Downloadable U.S. Rating: You can use parental restriction information while watching DTV channels.
Locking/Blocking Programs orMovies
option displays a grid or table.All the tables have ratings listed on the left. The TV Parental
Guidelines option also has kinds of content listed across the top: All: Lock all TV ratings.
FVVSLD
Suggestive Dialog.
the square again. When you click a lowrating, all the ratings above it will also display locks.
You can also AllowAll or Lock All. When done, pressthe RETURN button on your remote.
■
Change PIN: Select Change PIN and the Change PIN screen appears. Choose any 4 digits
OK
button. The TV has memorized yournew PIN.
✎If you for get the PIN, p ress the remot e-contro l buttons in th e following se quence,
which re sets the pin t o “0-0- 0-0” : POWER MUTEPOWER (o n)
Caption
■
Caption: You can switch the caption function on oroff. If captions are not
available, theywill not be displayed on the screen.
✎The Caption fe ature does no t work in Component or HDMI mode.
■
Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4:
(analog channels only) The Analog Caption
function operates in either analog TVchannel mode or when a signal is supplied
Analog Caption function may ormay not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (Digital channels only) The Digital
Captions function works with digital channels.
✎Ser vice1~6 m ay not be availab le in digital cap tion mode dep ending on the bro adcast.
■
Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard, Large, and Extralarge. The default is Standard.
Font Style: Options include Default
Foreground Color: Options include Default, White, Black, Red, Green, Blue, Yellow,
Magenta, and Cyan. You can change the color of the letters. The default is White.
Background Color: Options include Default, White,Black, Red, Green, Blue, Yellow, Magenta,
and Cyan. You can change the background colorof the captions. The default is Black.
Window Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta,
Cyan. Default is Black.
Foreground OpacityDefault,
Transparent, Translucent, Solid, and Flashing.
Background Opacity: This adjusts the opacity of the caption background. Options include
Default, Transparent, Translucent, Solid, and Flashing.
Window Opacity: This refers caption towindow background, not character background.
Options include Default, Transparent, Translucent, Solid, Flashing. Default is Transparent.
Edge Type: Options include No Edge, Raised, Depressed, Uniform, Drop Shadow. Default is No Edge.
Edge Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta,
Cyan. Default is White.
Return to Default: This option sets Size, Font Style, Foreground Color, Background Color,
Foreground Opacity, and Background Opacity to its default.
✎Digital Caption Options a re available only w hen you can sele ct Default and
Ser vice1 ~ Serv ice6 in Caption Mode.
✎The Fore ground and Ba ckground canno t be set to the sa me color.
Boot Logo
Enable or disable the displayof the Samsung logo when you turn on the TV.
HD Connection Guide
Contact Samsung
View this information when your TV does not work properly orwhen you
centers and how to download products and software.
Other Information
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with thewall mount items. Contact a technician
for assistancewhen installing the wall mount bracket. Samsung
Electronics is not responsible forany damage to the product or injury
to yourself orothers if you elect to install thewall mount on your own.
TVWall
mount
bracket
C
Wall Mount Kit Specications (VESA)
✎The wall mount kit is not supplied, but sold separately.
attaching to other building materials, please contact your nearest
dealer. Ifyou install the TV on a ceiling or slanted wall, it mayfall and
result in severe personal injury.
✎NOTE
Standard dimensions forwall mount kits are shown in the table
below.
When purchasing ourwall mount kit, a detailed installation
manual and all parts necessary forassembly are provided.
Do not use screws that do not complywith the VESA standard
screw specifications.
Do not use screws that are longerthan the standard dimension
or do not complywith the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
Forwall mounts that do not complywith the VESA standard
screw specifications, the length ofthe screws may differ
depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage orpersonal injury
when a non-VESA ornon-specified wall mount is used orthe
consumer failsto follow the product installation instructions.
Do not mount the TV at more than a15 degree tilt.
Always have two people mountthe TV on a wall.
Product
Family TVsize in
inches
VESA screw hole
specs (A * B) in
millimeters C (mm) Standard
Screw Quantity
LED-TV 43 200 X 200 21.5 ~ 22. 5 4
50
Do not install yourWall Mount Kit
while your TV is turned on. It may
result in personal injury due to
electric shock.
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may
cause the TV to fall. In particular, ensure that your children
do not hang over ordestabilize the TV; doing so may cause
the TV to tip over, resulting in serious injuries or death.
Follow all safetyprecautions provided on the included
Safety Flyer. For added stability, install the anti-fall device
for safety purposes, as follows.
To prevent the TVfrom falling
✎Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
1. Drive the screws into the clamps and rmly fasten them onto the wall.
Make sure the screws are rmly xed into the wall.
2. Remove the screws from the back center of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
3. Connect the clamps xed onto the TV and the clamps xed onto the wall
with a strong cable and then tie the string tightly.
✎Verify all connections are properly secured. Periodicallycheck the
connections for anysign of fatigue or failure. If you have any doubt
about the security of yourconnections, contact a professional
installer.
✎Install the TV close to the wall so that it does not fall.
✎
string before moving the TV.
Arranging the cableswith the cable guide
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to
manual provided with the Kensington Lock for additional information
on proper use.
✎Please find a “
K
” icon on the rearof the TV. The Kensington slot is
beside the “
K
” icon.
✎The position and color maydiffer depending on the model.
- 10 -
- 14--13 -
- 11 -
- 15 -
- 12 -
Specications
Environmental Considerations
Operating Temperature
Storage Temperature
50°F to 104°F (10°C to 40°C)
-4°F to 113°F (-20°Cto 45°C )
Model Name
Display Resolution
Screen Size
(Diagonal)
43" Class
(42.5" measured diagonally)
50" Class
Sound
Output
20 W
20 W
Body
With stand
Weight
Without Stand
With Stand
23.1 lbs (10.5 kg)
25.3 lbs (11.5 kg)
✎Design and specifications are subject to change without priornotice.
✎The actual appearance of the TV maydiffer from the images in this manual, depending on the model.
✎Typical powerconsumption is measured according to Energy StarProgram requirements for televisions.
■
JACK PANEL DETAIL/ REAR VIEW
2
1
634
5
(Unit:
inches
)
Model name 12345
15.4
NOTE: All drawings are not necessarily to scale. Some dimensions are subjectto change without prior notice. Refer to the dimensions prior to performing
installation of your TV. Not responsible for typographical orprinted errors.
Other manuals for 5000 Series
4
Table of contents
Other Samsung LED TV manuals
Samsung
Samsung UE32EH6030K User manual
Samsung
Samsung 50Q8 C Series User manual
Samsung
Samsung UN55B7000 - 55" LCD TV User manual
Samsung
Samsung UE C7 00W Series User manual
Samsung
Samsung 460 User manual
Samsung
Samsung QN85QN8 A Series User manual
Samsung
Samsung HG40NA593 User manual
Samsung
Samsung Hospitality tv 5500 User manual
Samsung
Samsung HG75AD690U User manual
Samsung
Samsung UE32J4700A User manual
Samsung
Samsung LED 6400 series User manual
Samsung
Samsung UE32EH4000W Guide
Samsung
Samsung UA50J5500 User manual
Samsung
Samsung 5 Series User manual
Samsung
Samsung 7 Series User manual
Samsung
Samsung QA65Q800T User manual
Samsung
Samsung UE32EH5 SERIES User manual
Samsung
Samsung 6100 Series User manual
Samsung
Samsung UE40H5500AW User manual
Samsung
Samsung 6 series User manual
