Samsung Series 9 9000 UN55C9000 User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung darts le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs
Samsung.
Comuniquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relacion con los productos de Samsung, comuniquese con el centro de
atencion al cliente de SAMSUNG.
r=.
m
.-4
<
B
CANADA 1-800-SAMSUNG (726-7864) w_!w.samsung.com Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
U.S.A 1-800-SAMSUNG (726-7864) w_!w.samsung.com Samsung Electronics America, Inc. 105 Challenger
Road Ridgefield Park, NJ 07660-0511
©2010 Samsung Electronics Co., Ltd. All rights reserved. BN68-02833A-01
Z
imagine the possibilities
Thank you for purchasing this Samsung product.
Toreceive more comblete service, please reg ster
your product at
www.samsung.com!register
Mode Serial No.

Figures and illustrations inthis User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
'_bs See the warranty card for more information on warranty terms.
Wide screen format LEDDisplays(16:9, the aspect ratio of the screen width to height) are primarily designed to viewwide screen format full-motion video.
The images displayedon them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen ifyour model offers this feature and
the images areconstantly moving. Displaying stationarygraphics and images on screen, such asthe dark sidebars on no expanded standard format
television video and programming, should be limited to nomore than 5% ofthe total televisionviewing per week.
Additionally, viewing other stationaryimages and text such as stock market reports, video gamedisplays, station Iogos, web sites or computer graphics
and patterns, should be limited as described above for alltelevisions. Displaying stationaryimages that exceed the above guidelinescan cause uneven
aging of LED Displays that leavesubtle, but permanent burned-in ghost images in the LED picture.To avoid this,vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars. On LEDmodels that offer picture sizingfeatures, use these controls to
view differentformats as a full screen picture.
Be carefulin the selection and duration of televisionformats usedfor viewing. UnevenLEDaging as a result offormat selection and use, as well as burned
in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICSNORTH AMERICAN LIMITEDWARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warrantysupplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusionsand limitations contained herein,SAMSUNG will additionallyprovide Warranty RepairService
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, forthe
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center.Along with this Statement,the Original Limited
Warranty Statement and a dated Billof Saleas Proofof Purchase must be presented to the Service Center.Transportation to andfrom the Service
Center isthe responsibility ofthe purchaser.Conditions covered are limited onlyto manufacturing defects in material or workmanship, and only those
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-siteservices, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
Forthe location of a SAMSUNG Authorized Service Center, please calltoll-ffee:
- in the United States : 1-800-SAMSUNG (1-800-726-7864)
- in Canada : 1-800-SAMSUNG
Avoid displaying still images (suchasjpeg picture files)or still image elements (such as TVchannel Iogos, panorama or 4:3 image format, stock or news
bars at screen bottom etc.) on the screen. Constant displaying of a still picture can causeghosting of the LED screen, which will affect image quality.To
reduce risk of this effect, please follow the recommendations below:
• Avoiddisplaying the same TV channel for long periods.
• Alwaystry to display a full screen image.
• Reducing brightness and contrast will help to avoid the appearance of affepimages.
• Use allTV features designed to reduce image retention and screen burn, refer to proper user manual section fordetails.
Keepthe requireddistances between the product and other objects (e.g.walls)to ensureproper ventilation.
Failingto do so may result in fire or a problem with the product due to an increasein the internal temperature of the product.
'_bs When using a stand or wall-mount, use parts provided W Samsung Electronicsonly.
Ifyou use parts provided by another manutacturer, it may result in a problem with the product or an injurydue to the product falling.
The appearance may differ depending on the product.
', "!"4 incises ,,
t
4 inche inches
m m
[ 4 inches -',
4 inches
j_4__,_L___......
English

Contents
• List of Features ......................................................... 4
• Accessories .............................................................. 4
• Viewing the Control Panel ......................................... 5
• Mini Remote Control ................................................. 6
• Viewing the Touch remote ......................................... 7
• Connecting to anAntenna ...................................... 10
• Plug & Play(Initial Setup) ......................................... 10
• Connecting to anAV Device .................................... 11
• Connecting to anAudio Device ............................... 13
• Connecting to a PC ................................................ 14
• Changing the Input Source ..................................... 15
• How to Navigate Menus .......................................... 15
• Channel Menu ........................................................ 16
SeeingChannels 16
UsingFavorite Channels 16
MemorizingChannels 16
Editing Channels 17
Other Features 17
• Picture Menu .......................................................... 18
Changingthe Preset Picture Mode
Adjusting Picture Settings
EconomicalSolutions
Changingthe PictureOptions
Viewing TV usingthe 3D function
Settingup the TVwith YourPC
18
18
18
19
21
24
• Sound Menu ........................................................... 24
Changingthe Preset Sound Mode 24
Adjusting Sound Settings 24
Sound Settings 25
• Setup Menu ............................................................ 26
Settingthe Time 26
Usingthe SleepTimer 26
Settingthe On /OffTimer 26
Locking Programs 27
Other Features 28
• Support Menu ......................................................... 30
• Network Connection ............................................... 32
Connecting to a Wired Network 32
Connecting to a WirelessNetwork 34
• Media Play.............................................................. 39
Connecting a USB Device 39
Connecting to your PCthrough a network 39
Screen Display 41
PlayingMultiple Files 44
Media Play - Additional Functions 44
• Anynet+ .................................................................. 46
SettingUp Anynet+ 47
Switching between Anynet+ Devices 47
Recording 48
Listeningthrough a Receiver 48
Troubbshooting for Anynet+ 49
• Internet@TV............................................................ 50
GettingStartedwith Internet@TV 50
Settingup Internet@TV 51
Usingthe Internet@TVservice 53
PROFILEWidget 55
Widget Gallery 55
Troubbshooting for Intemet@TV 56
HelpWebsite 56
AIIShare .................................................................. 57
About AlIShare 57
SettingUp AlIShare 57
• Assembling the Cables ........................................... 59
• Securing the TV to the Wall..................................... 60
• Troubleshooting ...................................................... 61
• Enclosed Wireless LAN Adapter .............................. 64
• License ................................................................... 65
• Specifications ......................................................... 65
• Dimensions ............................................................. 66
• Index ...................................................................... 67
• Regulatory Compliance Information ......................... 68
This function can be used by pressing the
TOOLS button on the remote control.
Check the Symbol!
Note
Indicatesadditionalinformation.
®
Step by Step Guide
Check here for instructions on how to open
the rebvant submenu within the OSD (on
screen display).
English 3

Getting Started
• Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box /STB (Set-Top-Box) satellite receiver.
• Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 89).
• Internet@l%_: You can use various internet services and view useful information and entertaining content (p, 50).
• AliShare: AIIShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 57),
• Self Diagnosis: You can check whether picture or sound operate normally (p. 30),
• 3D: This exciting new feature enables you to view 3D content.
Please make sure the following items are included with your LEDTV. ifany items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
Touch remote
W rd
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii@_!@i_ii_!_i_ii_!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i_!i!_!@_i_i_i_i__i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_!_@!!i!i_!_i_!_z!_z!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!iz!i_ii@_i_!i_!i_!i_,_i__i_@!!!@i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_i!_!_!!i_I!
Wall Mount Box (Assembly to Wall)
Three of each type of screw are supplied. Only two are required for assembly. The other is a spare.
(2EA)
English

Forbestcableconnectiontothisproduct,besuretousecableswithamaximumthicknessasbelow:
_ i • Maximumthickness-0.55inches
(14mm)
input Cables (Sold Separately)
i ,,n m v
The product color and shape may vary depending on the model.
3D Emitter --
Woofer
Speakers
FPower indicator
Remotecontrol sensor
Speakers
If
1 I
To control the TV using the LEDtouch pad, tap the LED touch pad centered underneath the stand. The touch pad will
slide out by itself. The LED touch pad will slide back in if unused for a specified period of time.
3D Emitter
Power Indicator
Remote control eenso-
SOURCEE_
MENU rrrl
--VOL+
VCHA
The LED on the 3D emitter blinks only when sending a 3D signal.
Blinks and turns off when the power is on and lights up instandby mode.
Aim the remote control towards this spot on the TV.
Toggles between allthe available input sources. In the on-screen menu, use this
button as you would use the ENTERE_ button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV'sfeatures.
Adjusts the volume. Inthe OSD, use the --VOL+ buttons as you would use the
and !_ buttons on the remote control.
Changes the channels. Inthe OSD, use the V CH A buttons as you would use the
T and A buttons on the remote control.
(b (Power) Turns the TV on or off.
Standby mode
Do not leaveyour TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English 5

Getting Started
The Mini Remote Control is a simplified remote control that consists of the power, channel and volume buttons only,
Description
Next channel
Volumedecrease --
Previouschannel
Power OrVOff button
Volume increase
IrDAtransmitter
'_bs Point tile IrDAtransmitter at tile TV
to use tile mini remote.
This is a special remote control for the visually impaired and has Braille points on the Channel and Volume buttons.
CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary OR (Manganese Dioxide) Lithium coin cells in the product sold
or distributed ONLY in California USA 'Perchloate Material - special handling may apply, See www.dtsc.ca.gov/
hazardouswaste/perchiorate:'
Inserting the battery
!
1. Turn the battery cover counterclockwise to unlock it and then
separate the battery cover.
2. Insert a 3V Lithium battery with the + side facing down into the
battery cover.
3. Place the battery cover into the remote control aligning it with the
grooves and then turn the battery cover clockwise to lock the
cover.
If the remote control doesn't work, check the following:
* Is the TV power on?
* Are the plus and minus ends of the batteries reversed?
* Are the batteries drained?
* Is there a power outage or is the power cord unplugged?
* Is there a special fluorescent light or neon sign nearby?
G English

Description
Front View RearView
TV Power button --
Touch screen
Speaker -- Earphonejack
Battery cover
Charge Port
Turn the TV on and off.
Mute or unmute the sound.
SOUBCE Display the source list (TV,PC, etc.) on the screen.
Press to control the volume.
Channe Press to change channels.
!Inserting the battery
1. Slide and open the battery cover
in the direction of the arrow. 2. Insert the battery with the
Samsung logo facing up. 3. Slide and close the battery
cover in the direction of the
arrow.
English 7

Getting Started
Remote Control Screen Display
Pressto directly access channels.
Returnsto the previous channel.
Pressto select additional channeb (digital)being broadcasted by the same station. For example, to
select channel "54-3", press "54", then press "-" and "3".
CONTENT: Displaysthe Content View, which includes Channel List, Intemet@TV, Media Play,
AIIShare and 3D.
MENU: Bringsup the OSD.
INTERNET@TV:Link to vanousinternet services (p.50).
RETURNg: Returnsto the previous menu.
TOOLS_'3: Quickly select frequently used functions.
INFO i: Dbplays information on the TVscreen.
EXIT*[J: Exitsthe menu.
Use these buttons in Media Play and Anynet+ modes (p. 39, 46).
(_: Controls recording for Samsung recorders that have the Anynet+ feature)
Buttons used in the Channel List, Internet@l"V, Media Play menu, etc.
!heNo 0at,onorMe,u Tapsony,cos.
xi_,!,,_',i,i,i,i,i,i,i,i,i,i,i,i,i' !!!!!!!!!!!!i,4!_!_!_!_!_!_!_!_!_!_!_!_!ilii i i i i i i i i i i i i i
INTERNET@'FV:Link to various internet
services(p. 50).
MEDIA_P:Displays Media Play (p. 39).
3D: Sets the 3D mode. (p.22).
YAHOO!: Runsthe Yahoo widget. (p. 54).
CHLIST: Displayschannel lists on the screen
(p. 16).
FA_,LCH:Displays Favorite Channel Lists on the
screen(p. 16).
RSlZE: Selects the picture size (p. 20).
CO: Controb the caption decoder (p.
28).
MTS: Pressto choose stereo, mono or
SeparateAudio Program (SAPbroadcast)
(p.25).
Selects the on-screen menu
items and changes the values
seenon the menu.
English

Setting Up Your Remote
You can set up your 3" LCD Touch Remote to control your TV in three ways:
As a standard, IR (Infra Red) remote
As an IRremote, your LCD Touch Remote works the same way as a standard push button remote, except you touch icons
and symbols on the LCD screen to control your TV instead of pushing buttons. Using your Touch Remote as an IR remote
requires no more set up than a standard remote and gives you access to most of the remote's functions and features.
As an extended distance, Wi-Fi remote
As an extended distance, Wi-Fi remote, your Touch Remote offers all the functions and features of the IR mode and, because
it uses Wi-Fi radio waves instead of infra red waves to control your TV,it lets you control your TVfrom a much greater distance
and even from around corners. It also gives you access to the Twin Display function which lets you watch the program or
content that is on your TV screen on the LCD screen of the Touch remote. The long distance, Wi-Fi mode requires a few
additional setup steps; possibly including re-initialization. It also requires you to attach Samsung's Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV's USB ports.
As a networked, Wi-Fi remote
As a networked, Wi-Fi remote, your Touch Remote gives you all the functions and features of the IRand the extended distance
modes and also gives you access to the Multimedia function which lets you listen to or view music, movie, and picture files
from your PC on your TV screen. You can also download upgrades to your Touch Remote's software directly from the Internet.
The networked, Wi-Fi mode requires the largest number of setup steps. Inaddition, to use the networked, Wi-Fi mode,
you need a working local area network and a wireless router. Youalso need to attach Samsung's Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV's USB ports. To use the Multimedia function, you need to
install Samsung's PC Share Manager on your PC. You can download PC Share Manager from http://www.samsung.com.
Setting up the Network
You can set up a wireless network for the 3-inch remote control.
How to connect using PBC (WPS)
Ifyour router has a PBC (WPS) button, follow these steps: PressthePBCbuttononthe
1. Connect your TV to your LAN. accesspointwithin120
seconds.
2. On the Services screen, touch Settings _ Remote Settings. RemainingTime:112
3. Touch Network.
4. Touch the PBC(WPS).
5. If the Press PBC button on the access point within 120 seconds, message appears,
press the PBC button on the device to connect.
For more information, refer to the wireless network setup manual of the device to be connected.
6. If the device is connected properly to the TV after starting count on message box then message box will be disappeared
automatically.
If the connection fails, please retry after 2 minutes.
Connecting to network
To setup the wireless connection automatically, follow these steps:
1. Follow Steps 1through 3 in the "How to connect using PBC (WPS)" procedure.
If the intended network cannot be found in the list, select $_ to open the list of
networks again.
2. Select a network and connect to the network using the encryption method (PIN, security
key, ad-hoc, etc.) set for the network.
3. When the network connection is complete, select Test to perform a network test.
For the automatic IP,the AP will automatically define the IP Address, Subnet Mask,
Gateway and DNS server.
For the manual IP, you can select Edit and directly enter the IP Address, Subnet
Mask, Gateway and DNS server.
For Full Touch Remote instructions, please read the Touch Remote's user manual.
English 9

Getting Started
When the TV is initiallypowered on, basic settings proceed automatically.
Connecting the power cord and antenna.
VHF/UHF Antenna
Antellna Cable (Not Supplied)
When the TV is initiallypowered on, a sequence of on-screen prompts will assist in configuring basic settings. Pressthe
POWER (b button. Plug & Play is available only when the Input source is set to T_.
To return to the previous step, press the Red button.
Turn on the TV ana
Touch Remote
Connect the Samsung
Wireless LAN Adapter
Selecting a tanguage
Selecting Store Demo
or Home Use
Selecting an antenna
o
<s&
Turn on the Touch Remote and then tap OK on
}ur remote,
t mar taKeabOUtone T/inureto estaDiisn a
wlretess connection between the TV and touch
remote using the Samsung Wireless LAN
Adaoter.
• Connect the Samsuno Wireless LANAdapter to the T_, You can connect the Samsung
Wireless LAN Adaoter using one ofthe methods shown on page 35.
• f the connection fails, reconnect tne Samsung Wireless LANAdapter and then try
agar
Press the A or T outton, tnen press the ENTERE_ button.
Select the desired OSD On Screen Display) language.
Press the _1or _- outton, tnen press the ENTERE_ button,
• Select the Home Use mode, Store Demo Mode is for retail environments.
• To return the unit's settings from Store Demo to Home Use (standard): Press the
votume DUttonon the TV.When you see the volume OSD, press and hold MENU for 5
_ec.
Press the A or T outton, tnen press the ENTERI_ button. Select Air, Cable or Auto.
Selecting a channel
Setting the Clock
Mode
Vew the HD
Connection Guide
Press the A or T outton, tnen press the ENTERE_ button. Select the channel source
to memorize, When settlnc,me antenna source to Cable, a step appears allowing you to
asstgn numencat vatues/channel freauencies to the channels. For more information, refer to
Channel- Auto Program (p. 16),
Press tne rNTFR[_ DUttOnat any time to interrupt the memorization process.
Set the Clock Mode automatica y or manually.
Auto: Allows ,ou to select DST (Daylight Saving Time) mode and time zone.
• Manual: Allows outc manuat y set the current date and time (p. 26),
The connection method for the best HD screen quality is displayed.
Enjoy your TV. Press the FNTFR _ DUIIOn.
If YOUWant to Reset This Feature...
(_ MENU _ Setup --_Plug & Play --_ ENTERI_
0 English

Connections
Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)
We recommend using the HDMI connection for the best quality HD picture.
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver
HDM] CaMe
(Not Supplied/
HDM_ _NI(DV 0, 2(ARC}, 3, 4, PC/DVI AUDIO _N
" For better picture and audio quality, connect to a digital device using an HDMI cable.
* An HDMI cable supports digital video and audio signals, and does not require an audio cable.
- To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
* The picture may not display normally (ifat all) or the audio may not work ifan external device that uses an older
version of HDMI mode is connected to the TV. Ifsuch a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
* Be sure to use an HDMI cable with a thickness of 14 mm or less.
* Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may
occur.
* A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the
ethernet function via HDMI.
* This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the
ARC function is supported by the HDM_ _N2(ARC) port only,
- If3D Auto View is set to On, some functions such as mnternet@TVmay be disabled. Inthis case, set
3D Auto View or 3D Mode to Off.
* The ARC function allows digital audio to output via the HDM_ _N2(ARC} port. Itcan be enabled only when the
TV is connected with an audio receiver that supports the ARC function.
English ii

Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Red Blue Green
Component Adapter
Video Cable
ed}
Red WhRe Yellow
For better picture quality, the Component connection is recommended over the A/V connection.
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link.
EX UNK: Oonnector for service only. :{
2 English

Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
C
DIGITAL AUDIO OUT (OPTICAL}
" When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL} jack, decrease the volume
of both the TV and the system,
"5,1 OH (channel) audio is available when the TV is connected to an external device supporting 5.1 OH,
"When the receiver (home theater) is set to on, you can hear sound output from the TV's optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 OH sound to the home theater receiver, When the source is
a digital component such as a DVD/Blu-ray player /cable box /STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. Ifyou want to
hear 5,1 OH audio, connect the digital audio out jack from your DVD/Blu-ray player /cable box /STB satellite
receiver directly to an amplifier or home theater.
AUDmOOUT: Connects to the audio input jacks on your amplifier/DVD home theater.
"When connecting, use the appropriate connector,
"When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier's volume control.
Eng,ish13

Connections
Using an HDMI/DVI cable or a D-sub cable
Display Modes (D-Sub and HDMI/DVI input)
Optimal resolution is 1920 X 1080 @60 Hz.
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT /DTVCEA
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
1920 x 1080p
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
52.500
74.620
67.500
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
70.000
70.000
60.000
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
89.040
128.943
148.500
NOTE
* For HDMI/DVI cable connection, you must use the HDM_ _NI(DV_)jack.
* The interlace mode is not supported.
* The set may operate abnormally if a non-standard video format is selected.
* Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
4 English
+/-
-/+
-/+
-/+
_/+
_/+
+/+
+/+
+/+
+/+
+/+
+/+
+/+
+/+
_/+
_/+
+/+
+/+
-/+
_/+
_/+
_/+
+/+

Source List
Use to select TV or an external input sources such as a DVD
/Blu-ray player /cable box /STB satellite receiver.
[_ MENU _ input --_Source List --_ ENTERI_
Im TV /PC /AV /Component /HDMI1/DVI /HDMI2 /
HDMI3 /HDMI4 /USB
You can only choose external devices that
are connected to the TV. Inthe Source List,
connected inputs will be highlighted.
In the Source List, PC is always activated.
Edit Name
(_ MENU _ input _ Edit Name _ ENTERI_
VCR /DVD /Cable STB /Satellite STB /PVR STB /
AV Receiver /Game /Camcorder /PC /DVI PC /DVI
Devices /TV /IPrv /Blu-ray /HD DVD /DMA: Name
the device connected to the input jacks to make your
input source selection easier.
When a PC with a resolution of 1920 x 1080 @60Hz is
connected to the NDM_ _NI(DV_} port, you should set
the TV to DVI PC mode under Edit Name.
When connecting an HDMI/DVI cable to the NDM_ _N
I(DVl) port, you should set the TV to DVI PC or DVI
Devices mode under Edit Name.
Basic Features
Before using the T_, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
O MENU button: Displays the main on-screen menu.
ENTERE_ /Direction button: Move the cursor and
select an item. Confirm the setting,
EXiT button: Exits the on-screen menu.
O RETURN button: Returns to the previous menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU The main menu options appear on
..... theinput,Picture,Sound, Channel, Setup,scrApplication,can: Support.
Select an icon with the A or _'
button.
Press ENTERI_ to access the
sub-menu.
Select the desired submenu with
the A or • button.
Adjust the value of an item with the
4 or _- button. The adjustment in
the OSD may differ depending on
the selected menu.
Press ENTERI_ to confirm the
selection.
Press EXIT.
English 15

Basic Features
Seeing Channels
Channel List
Add, delete or set Favorite channels and use _;
the program guide for digital broadcasts.
(_ MENU _ Channel --_Channel List --_ C
ENTER
Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by
pressing the A /_ and ENTERIZ_ buttons.
Then you can watch the selected channel.
Using Favorite Channels
(_ MENU --_Channel _ Channel List --_ ENTERI_
Add to Favorite /Debte from Favorite
Set channels you watch frequently as Favorites,
1. Select a channel and press the TOOLS button.
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
m {_HAII Channels: Shows all currently available channels.
Ill _Added Channels: Shows alladded channels.
Ill _ Favorite: Shows allfavorite channels.
Ill _ Programmed: Shows all currently reserved
programs.
Using the color buttons with the Channel List
" @Red (Antenna): Switches to Air or Cable.
" [3Green (Zoom): Enlarges or shrinks a channel
number.
" _ Yellow (Select): Selects multiple channel lists,
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
_/ mark appears to the left of the selected channels.
" O (Page): Move to next or previous page.
. _-_ (Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Channel Status Display Icons
_/ A channel selected.
V A channel set as a Favorite.
(_) A reserved Program.
To show all Favorite channels, click on
the button shown on the right.
Memorizing Channels
(_ MENU --_ Channel _ ENTERI_
Antenna (Air /Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i,e.an Air or a Cable system).
Auto Program
Ill Air: Air antenna signal.
Ill Cable: Cable antenna signal.
Ill Auto: Air and Cable antenna.
6 English

NOTE
*WhenselectingtheCableTVsystem:STD,HRC
andIRCidentifyvarioustypesofcableTVsystems.
Contactyourlocalcablecompanytoidentifythe
typeofcablesystemthatexistsinyourparticular
area.Atthispoint,thesignalsourcehasbeen
selected.
*Afteralltheavailablechannelsarestored,itstarts
toremovescrambledchannels.TheAutoProgram
menuthenreappears.
Editing Channels
(_ MENU _ Channel --_Channel List --_ ENTERI_
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Ill Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features
(_ MENU _ Channel --_ENTERI_
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20-30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTERE_ button to select Stop.
2. Press the _ button to select Yes.
3. Press the ENTER_ button.
This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options (Add
/Delete, Timer Viewing, Select All /Deselect All). Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
ml Add /Delete: Delete or add a channel to display the
channels you want.
m
m
NOTE
* All deleted channels will be shown on the All
Channels menu.
* A gray-colored channel indicates the channel
has been deleted.
* The Add menu only appears for deleted
channels.
* Delete a channel from the Added Channels or
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the _ /!_ /A/V" buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer
Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
Ifyou selected Once, Every Week or EveryDay
in Repeat you can enter the date you want.
4. Select OK, then press the ENTERI_ button when
done.
NOTE
* Only memorized channels can be reserved.
* Reserved programs will be displayed in the
Programmed menu.
* When a digital channel is selected, press the !_
button to view the digital program.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or
more channels are selected.
Programmed .....................................................................................................................................................................
(inChannel List)
You can view, modify or delete a show you have reserved
to watch, Programmed timer viewing is displayed here,
Highlight a program and press the TOOLS button to display
Options,
Ill Change Info: Change a show you have reserved to
watch, Begin with step 3 of "Timer Viewing" above.
ml Cancel Schedules: Cancel a show you have reserved
to watch.
This deletes the highlighted or selected
program(s),
English 17

Basic Features
im
im
information: Display a show you have reserved
to watch. (Youcan also change the reservation
Information.)
Alternatively, you can view Information by
highlighting a program and pressing the
ENTERI_ button.
Select All /Deselect All: Select or deselect all reserved
programs.
Fine Tune
(analog channels only)
Ifthe reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation, Ifthe signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear,
Settings are applied to the channel you're currently
watching.
Fine tuned channels that have been saved are marked
with an asterisk .....on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset,
Changing the Preset Picture Mode
{_ MENU _ Picture -_ Mode -_ ENTERE_
Mode
Select your preferred picture type.
Ill Dynamic: Suitable for a bright room.
Ill Standard: Suitable for a normal environment.
Ill Natural: Suitable for reducing eye strain.
Natural is not available in PC mode.
Ill Movie: Suitable for watching movies in a dark room.
Adjusting Picture Settings
{_ MENU _ Picture _ ENTERI_
Backlight /Contrast /Brightness /
Sharpness /Color /Tint (G/R)
Yourtelevision has several setting options for picture quality
control.
NOTE
When you make changes to Backlight, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
* In PC mode, you can only make changes to
Backlight, Contrast and Brightness.
* Settings can be adjusted and stored for each
external device connected to the TV.
Economical Solutions
The Eco Function can be used to enhance your power
savings.
Eco Solution
(_ MENU _ Picture _ Eco Solution _ ENTERE_
Energy Saving (Off /Low /Medium /High /Picture
Off /Auto): This adjusts the brightness of the TV in
order to reduce power consumption. Ifyou select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except the volume button
to turn on the screen.
Ill Eco Sensor (Off /On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
If you adjust the Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
Ill No Signal Power Off (Off /15 min. /30 min. /60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
Disabled when the PC is in power saving mode.
8 English

Changing the Picture Options
Advanced Sett!ngs .......................................................................................................................................................
(_ MENU _ Picture _ Advanced Settings
ENTER 1_
(Advanced Settings are available in Standard /Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance, LED Motion
Plus.
m
m
m
m
m
Black Tone (Off /Dark /Darker /Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off /Low /Medium /High): Adjust
the screen contrast.
Shadow Detail (-2~+2): Increase the brightness of dark
images.
Gamma: Adjust the primary color intensity.
Expert Pattern (Off /Pattern1 /Pattern2): By
running the Expert Pattern function, the picture can
be calibrated. Ifthe OSD menu disappears or a menu
other than the Picture menu is opened, the calibration is
saved and the Expert Pattern window disappears.
Off: Turns the Expert Pattern function off.
Pattern1 : This is a test screen designed to demonstrate
the affects of display settings on shades.
Pattern2: This is a test screen designed to demonstrate
the affects of display settings on colors.
After selecting Pattern1 or Pattern2, you can
adjust any of the advanced settings to the desired
effect.
While the Expert Pattern is running, sound is not
output.
Only enabled in DTV, Component and HDMI
modes.
[] RGB Only Mode (Off /Red /Green /Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
[] Color Space (Auto /Native /Custom): Adjust the
range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space
to Custom.
[] White Balance: Adjust the color temperature for a more
natural picture.
R-Offset /G-Offset /B-Offset: Adjust each color's
(red, green, blue) darkness.
R-Gain /G-Gain /B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default
settings.
[] 10p White Balance (Off /On): Controls the white
balance in 10 point intervals by adjusting the red, green,
and blue brightness.
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
[] Flesh Tone: Emphasize pink "Flesh Tone."
[] Edge Enhancement (Off/On): Emphasize object
boundaries.
xvYCC (Off/On): Setting the xvYCC mode on
increases detail and color space when watching movies
from an external device (e.g. BD/DVD player) connected
to the HDMI or Component INjacks.
Available when the picture mode is set to Movie
and when the external input is set to HDMI or
Component.
Some external devices may not support this
function.
LED Motion Plus (Off /On): Removes drag from fast
scenes with a lot of movement to provide a clear picture.
English lg

Basic Features
MENU _ Picture _ Picture Options _ ENTER[_
In PC mode, you can only make changes to the Color
Tone, Size and Auto Protection Time.
Ill Color Tone (Cool /Normal /Warm1 /Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
Settings can be adjusted and stored for each external
device connected to an input on the TM
Ill Size: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most ofthe time. pc,SIZE
16:9 : Sets the picture to 16:9 wide mode.
Zoom1: Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the
picture to fit the entire screen.
Available with HD 1080i /720p signals in 16:9
mode.
4:3 : Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p /1080i /1080p) or Component
(1080i /1080p) signals are inputted.
NOTE
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the !_ button to select Position.
2. Press the ENTERC_ button.
3. Press the A or T button to move the picture up
or down.
4. Press the ENTERIZ_ button.
5. Press the !_ button to select Reset.
6. Press the ENTERIZ_ button to reset the picture
to its default position.
* After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the _ or I_ button to select Position.
2. Press the ENTERI_ button.
3. Press the A, _, _ or I_ button to move the
picture.
4. Press the ENTERIZ_ button.
5. Press the _ or I_ button to select Reset.
6. Press the ENTERI_ button.
* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
* Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
ATV,AV, 16:9, Zoom1,
Component (480i, 480p) Zoom2, 4:3
DTV(1080i), 16:9, 4:3, Wide Fit,
Component (1080i, 1080p), Screen Fit
HDMI (720p, 1080i, 1080p)
PC 16:9, 4:3
Digital Noise Filter (Off /Low /Medium /High /Auto
/Auto Visualization): Ifthe broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal isweak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays signal strength.
Only available for analog channels.
When bar is green, you are receiving the best
possible signal.
0 English