Samsung UA40B7000 User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRALIA 1300 362 603 www.samsung.com/au
CHINA 800-810-5858
400-810-5858
010-6475 1880
www.samsung.com/cn
HONG KONG:3698 - 4698 www.samsung.com/hk
INDIA 3030 8282
1-800-3000-8282
1800 110011
www.samsung.com/in
INDONESIA 0800-112-8888 www.samsung.com/id
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA 1800-88-9999 www.samsung.com/my
NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com/nz
PHILIPPINES 1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
02-5805777
www.samsung.com/ph
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com/sg
THAILAND 1800-29-3232
02-689-3232
www.samsung.com/th
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com/vn
SOUTH AFRICA 0860-SAMSUNG(726-7864 ) www.samsung.com/za
U.A.E 800-SAMSUNG (726-7864)
8000-4726
www.samsung.com/ae
LED TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
BN68-02077A-00
[7000]BN68-02077A-00Eng.indb 1 2009-03-11 �� 2:55:56

License
Without producing harmful VOC (Volatile Organic Compounds), Samsung’s Eco-friendly “Crystal Design”
expresses colour gradation thanks to our dual injection technology.
TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is
incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
DivX Certified products using Home Theatre Test Kit v3.0 or later: Plays DivX® video, including premium
content.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
Do not display still image and partially still on the LED panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as screen burn. To avoid such image retention, reduce the degree of brightness and
contrast of the screen when displaying a still image.
Watching the LED TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or
a game console may cause a similar effect to the screen. Damages caused by the above effect are not
covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To
prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
❑
❑
●
●
●
[7000]BN68-02077A-00Eng.indb 1 2009-03-11 �� 2:55:56

English - 1
Symbol
N O T
Note One-Touch Button TOOL Button
❑
SETTING UP YOUR TV
Viewing the Control Panel ................................................................. 2
Accessories ....................................................................................... 3
Viewing the Connection Panel........................................................... 4
Viewing the Remote Control.............................................................. 6
Mini Remote Control.......................................................................... 7
Installing Batteries in the Remote Control ......................................... 7
OPERATION
Viewing the menus ............................................................................ 8
Placing Your Television in Standby Mode .......................................... 9
Plug & Play Feature........................................................................... 9
CHANNEL
Channel Menu ................................................................................. 10
Managing Channels .........................................................................11
PICTURE
Conguring the Picture Menu .......................................................... 13
Viewing Picture-in-Picture................................................................ 16
Using Your TV as a Computer (PC) Display.................................... 17
SOUND
Conguring the Sound Menu........................................................... 18
Setting up the TV with your PC........................................................ 18
Selecting the Sound Mode .............................................................. 19
SETUP
Conguring the Setup Menu............................................................ 20
Setting the Time............................................................................... 21
Network Connection ........................................................................ 22
Setting the Network ......................................................................... 25
INPUT / SUPPORT
Input Menu....................................................................................... 28
Support Menu .................................................................................. 28
MEDIA PLAY (USB & DLNA)
Connecting a USB Device ............................................................... 30
Media Play Function ........................................................................ 31
Sorting the Photo List ...................................................................... 32
Photo List Option Menu ................................................................... 33
Viewing a Photo or Slide Show........................................................ 34
Slide Show Option Menu ................................................................. 35
Sorting the Music List ...................................................................... 36
Music List Option Menu ................................................................... 37
Playing a Music ............................................................................... 38
Music Play Option Menu.................................................................. 39
Sorting the Movie List ...................................................................... 39
Movie List Option Menu................................................................... 40
Playing a Movie File ........................................................................ 40
Movie Play Option Menu ................................................................. 43
Using the Setup Menu ..................................................................... 44
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
MEDIA PLAY-DLNA
Setting the DLNA Network............................................................... 45
Installing the DLNA Application........................................................ 46
Using the DLNA Application............................................................. 47
Using the DLNA Function ................................................................ 49
ANYNET+
Connecting Anynet+Devices........................................................... 50
Setting Up Anynet+.......................................................................... 51
Switching between Anynet+Devices............................................... 51
Recording ........................................................................................ 52
Listening through a Receiver (Home theatre).................................. 52
Troubleshooting for Anynet+............................................................ 53
CONTENT LIBRARY
Using the Content Library................................................................ 54
Using the TV Memory Contents....................................................... 55
Using the Content Management...................................................... 56
INTERNET@TV
Getting Started with Internet@TV.................................................... 57
Setting up Internet@TV ................................................................... 57
Using the Internet@TV service........................................................ 58
Troubleshooting for internet@TV..................................................... 59
Help Website ................................................................................... 59
HOME NETWORK CENTRE
Home Network Centre ..................................................................... 60
Setting Up the Home Network Centre ............................................. 61
Using the Message Function ........................................................... 62
Using the Media Function................................................................ 63
RECOMMENDATIONS
Teletext Feature............................................................................... 64
Installing the Stand .......................................................................... 65
Disconnecting the Stand.................................................................. 66
Installing the Wall Mount Kit ............................................................ 66
Assembling the Cables.................................................................... 67
Anti-Theft Kensington Lock ............................................................. 68
Preparing before installing Wall-Mount............................................ 68
Securing the TV to the Wall ............................................................. 69
Troubleshooting: Before Contacting Service Personnel .................. 70
Specications .................................................................................. 71
GNU GENERAL PUBLIC LICENSE
END OF TERMS AND CONDITIONS
GNU Lesser General Public License (LGPL)
END OF TERMS AND CONDITIONS
LICENSE ISSUES
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
CONTENTS
[7000]BN68-02077A-00Eng.indb 1 2009-03-11 �� 2:55:56

English - 2
SETTING UP YOUR TV
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
Viewing the Control Panel
The product colour and shape may vary depending on the model.
The front panel buttons can be activated by touching them with your finger.
1 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.
2 P (POWER):Press to turn the TV on and off.
3 z :Press to change channels. In the on-screen menu, use the z buttons as you would use the ▼ and ▲
buttons on the remote control.
4 y : Press to increase or decrease the volume.
In the on-screen menu, use the y buttons as you would use the ◄ and ► buttons on the remote control.
5 MENU: Press to see an on-screen menu of your TV’s features.
6 SOURCE E : Toggles between all the available input sources. In the on-screen menu, use this button as you would use the
ENTER E button on the remote control.
7 SPEAKERS
N
¦
N
N
7
6 5 4 3
1 2
7
[7000]BN68-02077A-00Eng.indb 2 2009-03-11 �� 2:55:57

English - 3
Accessories
Remote Control & Batteries (AAA x 2) Cover-Bottom Programme CD
Cleaning Cloth Holder-Wire Cable
(Depending on the model) Mini Remote Control & Batteries (3V)
Stand Screw (M4 X L10)
(Depending on the model) Holder-Ring (4ea) Holder-Wire Stand Holder-Wire (3ea)
Owner’s Instructions ● Warranty card ● Safety Guide ● Registration Cards ●
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The items colour and shape may vary depending on the model.
¦
N
N
N
[7000]BN68-02077A-00Eng.indb 3 2009-03-11 �� 2:55:58

English - 4
Viewing the Connection Panel
The product colour and shape may vary depending on the model.
1 KENSINGTON LOCK (depending on the model)
The Kensington Lock (optional) is a device used to physically x the system when used in a public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
The location of the Kensington Lock may be different depending on its model.
2 LAN
Connect a LAN cable to this port to connect to the Network.
3 ANT IN
Connects to an antenna or cable TV system.
4 COMPONENT IN
Connects Component video / audio.
When connecting, use the appropriate connector.
AV IN [VIDEO] / [R-AUDIO-L]
Video and audio inputs for external devices, such as a camcorder or VCR.
When connecting, use the appropriate connector.
¦
N
–
N
–
–
–
N
–
N
2
1
3 4
6
7
8
7
9
5
[TV Rear Panel]
Power Input
[7000]BN68-02077A-00Eng.indb 4 2009-03-11 �� 2:55:59

English - 5
5 PC IN / PC/DVI AUDIO IN
Connect to the video and audio output jack on your PC.
If your PC supports an HDMI connection, you can connect this to the HDMI IN 1 (DVI), 2, 3 or 4terminal.
If your PC supports a DVI connection, you can connect this to the HDMI IN 1 (DVI) / PC/DVI AUDIO IN terminal.
6 HDMI IN 1 (DVI), 2, 3, 4
Connects to the HDMI jack of a device with an HDMI output.
No additional Audio connection is needed for an HDMI to HDMI connection.
Use an HDMI cable which is smaller than 14mm.
What is HDMI?
HDMI(High-Denition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature installed.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable
Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable
and there is no sound, connect the HDMI cable to the HDMI IN 1(DVI) jack and the audio cables to the PC/DVI AUDIO
IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) to conrm the HDMI version, then request an upgrade.
Use the HDMI IN 1(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
(DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable
connection, you must use the HDMI IN 1(DVI) jack.
HDMI cables that are not 1.3 may cause annoying icker or no screen display.
7 USB1(HDD) / USB2
Connector for software upgrades and Media Play, etc.
You can connect to Samsung’s network wirelessly using the ‘Samsung Wireless LAN Adapter’ (Sold separately).
For USB HDD, use the USB1(HDD) port.
8 AUDIO OUT
Connect RCA audio cables to AUDIO OUT on the rear of your set and the other ends to corresponding audio in
connectors on the Amplier or DVD Home Theatre.
9 SERVICE
Connector for service only.
–
N
N
–
N
N
N
●
●
N
N
N
–
–
N
–
–
[7000]BN68-02077A-00Eng.indb 5 2009-03-11 �� 2:55:59

English - 6
Viewing the Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product colour and shape may vary depending on the model.
1 POWER : Turns the TV on and
off.
2 TV : Selects the TV mode
directly.
3 NUMERIC BUTTONS : Press to
change the channel.
4 E : Performs the same function
as the ENTER E button of
the directional buttons. When
switching channels with the
numeric buttons, and you press
the channel number and then the
ENTER E button, the channel is
immediately switched.
5 CH LIST : Displays the Channel
List on screen.
6 TOOLS : Use to quickly select
frequently used functions.
7 INTERNET@ : Press to use
various internet services to
view useful information and
entertaining content.
8 COLOUR BUTTONS : Use these
buttons in the Channel list,
Internet@TV, Media Play menu,
etc.
9 Y : Press to increase or
decrease the volume.
0 MUTE M : Press to temporarily
cut off the sound.
@ INFO : Press to display
information on the TV screen.
# Use these buttons in the DMA,
Media Play and Anynet+modes.
( ∏ : This remote can be used
to control recording on Samsung
recorders with the Anynet+
feature)
$ ON/OFF @ : Pressing the
ON/OFF @ light button toggles
between on and off. When the
remote control is on, and a button
is pressed on the remote control,
the remote control buttons will
be lit for a moment. (Using the
remote control with the ON/OFF
@ light button set to On will
reduce the battery usage time.)
% PRE-CH : Enables you to return
to the previous channel you were
watching.
^ MENU : Displays the main on-
screen menu.
& FAV.CH : Used to display
Favourites Channel Lists on the
screen.
* RETURN : Returns to the
previous menu
(  UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER E : Use to
select on-screen menu items and
change menu values.
) EXIT : Press to exit the menu.
a SOURCE : Press to display
and select the available video
sources.
b > P < : Press to change
channels.
c CONTENT : This function
enables you to view the Content
Library.
d MEDIA.P : Allows you to play
music files, pictures and movies.
e DUAL : Sound effect selection
f P.SIZE : Picture size selection
Teletext Functions
2 : : Exit from the Teletext
display
5 8 : Teletext store
6 4 : Teletext size selection
8 Fastext topic selection
! / : Alternately select
Teletext, Double, or Mix.
@ 5 : Teletext reveal
% 1 : Teletext sub page
^ 6 : Teletext index
* 9 : Teletext hold
) 7 : Teletext cancel
a 0 : Teletext mode selection
(LIST / FLOF)
b 2 : Teletext next page
3 : Teletext previous page
¦
N
N
N
2
1
3
4
5
0
6
7
8
9
!
@
#
$
%
^
&
*
)
b
c
d
e
f
a
(
[7000]BN68-02077A-00Eng.indb 6 2009-03-11 �� 2:55:59

English - 7
Mini Remote Control
The Mini Remote Control is a simplified remote control that consists of the
power, channel and volume buttons only.
1Television Standby button
This button only works when you press it for longer than 1.5 seconds.
2 < : Next channel / > : Previous channel
3+ : Volume up / –: Volume down
4IrDA transmitter
Use the Mini Remote Control so that this part faces the TV.
Installing Batteries in the Remote Control
Normal Remote Control
1. Lift the cover at the back of the remote control upward as shown in the
figure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the
diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t
be using the remote control for a long time. (Assuming typical TV
usage, the batteries should last for about one year.)
Mini Remote Control
1. Turn the battery cover counterclockwise to unlock it and then separate the
battery cover.
2. Insert the corresponding 3V Lithium battery.
3. Place the battery cover into the remote control aligning it with the grooves
and then turn the battery cover clockwise to lock the cover.
If the remote control doesn’t work, check the following:
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?
¦
N
N
¦
N
N
N





OPEN
CLOSE
OPEN
CLOSE
1
4
2
3
2
3
[7000]BN68-02077A-00Eng.indb 7 2009-03-11 �� 2:56:00

English - 8
OPERATION
Viewing the menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
Operation the OSD (On Screen Display)
The access step may differ depending on the selected menu.
1. Press the MENU button.
2. The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,
Channel, Setup, Input, Application, Support.
3. Press the ▲ or ▼ button to select one of the icons.
4. Then press the ENTER
E button to access the icon’s sub-menu.
5. Press the ▲ or ▼ button to select the icon’s submenu.
6. Press the ◄ or ► button to decrease or increase the value of a particular item. The
adjustment OSD may differ depending on the selected menu.
7. Press the ENTER
E button to complete the configuration. Press the EXIT button to exit.
¦
❑
MENU Button
Display the main on-screen menu.
ENTER E / DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN Button
Return to the previous menu.
EXIT
Exit the on-screen menu.
Mode :Standard ▶
Backlight :7
Contrast :95
Brightness :45
Sharpness :50
Colour :50
Tint(G/R) :G50/R50
AdvancedSettings
Picture
Mode :Standard
Backlight :7 ▶
Contrast :95
Brightness :45
Sharpness :50
Colour :50
Tint(G/R) :G50/R50
AdvancedSettings
PictureOptions
Picture
7
U Move L Adjust E Enter R Return
▲
Backlight
▼
Help icon
[7000]BN68-02077A-00Eng.indb 8 2009-03-11 �� 2:56:00

English - 9
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
P button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER
P button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER
P button on the remote control.
You can also use the POWER P button on the TV.
The message Select the OSD Language. is displayed.
2. Press the ENTER
E button. Press the ▲ or ▼ button to select the language, then press
the ENTER E button. The message Select ‘Home Use’ when installing this TV in your
home. is displayed.
3. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E button.
We recommend setting the TV to Home Use mode for the best picture in your home
environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4. Press the ENTER
E button. Select the appropriate area by pressing the ▲ or ▼ button. Press the ENTER E button to
confirm your choice.
5. The channel search will start and end automatically.
Press the ENTER E button at any time to interrupt the memorization process.
After all the available channels are stored, the message Set current date and time is displayed.
6. Press the ENTER
E button.
Select the Day, Month, Year, Hour, or Minute by pressing the ◄ or ► button.
Set the Day, Month, Year, Hour, or Minute by pressing the ▲ or ▼ button.
You can also set the Day, Month, Year, Hour and Minute by pressing the number buttons on the remote control.
7. The connection method to provide the best quality HD is offered. After confirming the method, press the ENTER
E button.
8. Press the ◄ or ► button to select See Product Guide or Watch TV, then the ENTER
E button.
See Product Guide: You are moved to the Product Guide where you can view the introduction to the main functions of
your new HDTV.
Watch TV: You can watch the memorized channels.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTER E button.
2. Press the ENTER
E button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN number, use the Change PIN function. (refer to page 20)
The Plug & Play feature is only available in the TV mode.
¦
N
N
¦
N
N
N
N
N
N
N
N
•
•
N
N
Plug&Play  ▶
Language :English
Time
GameMode :Off
BDWise :Off
NetworkType :Cable
NetworkSetup
ChildLock :On
Setup
SelecttheOSDLanguage.
MenuLanguage :English 
Plug&Play
E Enter
[7000]BN68-02077A-00Eng.indb 9 2009-03-11 �� 2:56:01

English - 10
CHANNEL
Channel Menu
Area
You can change the area for channels.
Auto Store
You can scan for the frequency ranges available to you (and availability depends on your
area). Automatically allocated programme numbers may not correspond to actual or desired
programme numbers.
If a channel is locked using the Child Lock function, the PIN input window appears.
Scans for all channels with active broadcast stations and stores them in the TV’s memory.
If you want to stop Auto Store, press the ENTER E button.
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTER E button.
Manual Store
Scans for a channel manually and stores it in the TV’s memory.
If a channel is locked using the Child Lock function, the PIN input window appears.
Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
ColourSystem→Auto/PAL/SECAM/NTSC4.43/NTSC3.58: Sets the colour system value using the ▲ or ▼ button.
SoundSystem→BG/DK/I/M: Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C(Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard required.
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the first channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER E button.
Channel mode
P(Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C(Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
S(Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Channel List
For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions. (refer to pages 11~12)
You can select these options by simply pressing the CH LIST button on the remote control.
Channel Mode
When press the P > / < button, Channels will be switched within the selected channel list.
Added Ch.
Channels will be switched within the memorized channel list.
Favourite Ch.
Channels will be switched within the favourite channel list.
Fine Tune
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in the
channel banner.
To reset the fine-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER E button.
Only TV channels can be fine tuned.
¦
❑
❑
N
N
N
❑
N
N
●
●
●
●
N
N
●
●
N



❑
O
❑
■
■
❑
N
N
N
Area :Asia/Europe ▶
AutoStore
ManualStore
ChannelList
ChannelMode :AddedCh.
FineTune
Channel
[7000]BN68-02077A-00Eng.indb 10 2009-03-11 �� 2:56:01

English - 11
Managing Channels
Using this menu, you can add / delete or set favourites channels.
All Channels
Shows all currently available channels.
Added Channels
Shows all added channels.
Favourites
Shows all favourite channels.
To select the favourites channels you have set up, press the FAV.CH button on the remote control.
Programmed
Shows all current reserved programmes.
Select a channel in the All Channels, Added Channels or Favourites screen by pressing the ▲ / ▼ buttons, and pressing
the ENTER E button. Then you can watch the selected channel.
Using the Colour buttons with the Channel List
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists.
You can perform the add/delete or add to favourites/delete from favourites function for multiple channels at the same
time.
Select the required channels and press the Yellow button to set all the selected channels at the same time.
The c mark appears to the left of the selected channels.
TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from Favourite), Lock (or Unlock), Timer
Viewing, Edit Channel Name, Sort, Select All (or Deselect All), Auto Store menu. (The Options menus may differ
depending on the situation.)
Channel Status Display Icons
c
A channel selected by pressing the yellow button.
*
A channel set as a Favourite.
(
A programme currently being broadcast.
\
A locked channel.
)
A reserved programme
Channel List Option Menu (in All Channels / Added Channels / Favourites)
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels you want.
All deleted channels will be shown on All Channels menu.
A gray-coloured channel indicates the channel has been deleted.
The Add menu only appears for deleted channels.
You can also delete a channel to the Added Channels or Favourites menu in the same
manner.
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
Press the TOOLS button to display the Tools menu. You can also set the add to (or delete from) Favourite by selecting Tools
→AddtoFavourite (or Delete from Favourite).
The * symbol will be displayed and the channel will be set as a favourite.
All favourite channels will be shown on Favourites menu.
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed.
This function is available only when the Child Lock is set to On. (see page 20)
The PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN, by selecting Change PIN from the menu.
The \ symbol will be displayed and the channel will be locked.
¦
■
■
■
O
■
N
N


N
N
N

N
N
N
■
N
N
N
N
■
T
N
N
■
N
N
N
N
AddedChannels
1 C--
2 C--
3C--
4 C--
5
*  C--
6 C--
7 C--
8 C--
9 C--
10 C--
 Zoom Select T Tools
AllChannels
1 C--
2 C--
3C--
4 C--
5
*  C--
6 C--
7 C--
8 C--
9 C--
10 C--
 Zoom Select T Tools
Delete
AddtoFavourite
Lock
TimerViewing
EditChannelName
Sort

[7000]BN68-02077A-00Eng.indb 11 2009-03-11 �� 2:56:01

English - 12
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a programme, set the current time first. (see page 21)
Only memorized channels can be reserved.
You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control.
Reserving a programme will be shown in the Programmed menu.
Edit Channel Name
Channels can be labelled so that their call letters appear whenever the channel is selected.
Sort
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using
the auto store.
Select All / Deselect All
Select All: You can select all the channels in the channel list.
Deselect All: You can deselect all the selected channels.
You can only select Deselect All when there is a selected channel.
Auto Store
For detailed procedures on setting up options, refer to page 10.
If a channel is locked using the Child Lock function, the PIN input window appears.
Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.
Change Info
Select to change a viewing reservation.
Cancel Schedules
Select to cancel a viewing reservation.
Information
Select to view a viewing reservation.
(You can also change the reservation information.)
Select All
Select all reserved programmes.
■
N
N
N
■
■
■
●
●
N
■
N
N
N
■
■
■
■
Programmed
1/1/2009
01:595 ) 
2/1/2009
06:592
) TheEqualizer
08:592 ) McMillan&Wife
07:592 ) M.Spillane’smike
 ' Zoom ' Select T Tools E Information
ChangeInfo
CancelSchedules
Information
SelectAll

[7000]BN68-02077A-00Eng.indb 12 2009-03-11 �� 2:56:01

English - 13
PICTURE
Configuring the Picture Menu
Mode
You can select the type of picture which best corresponds to your viewing requirements.
Press the TOOLS button to display the Tools menu. You can also set the picture mode by
selecting Tools→PictureMode.
Dynamic
Selects the picture for increased definition in a bright room.
Standard
Selects the picture for the optimum display in a normal environment.
Natural
Selects the picture for an optimum and eye-comfortable display.
Movie
Selects the picture for viewing movies in a dark room.
Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
Backlight
Adjusts the brightness of LED back light.
Contrast
Adjusts the contrast level of the picture.
Brightness
Adjusts the brightness level of the picture
Sharpness
Adjusts the edge definition of the picture.
Colour
Adjusts colour saturation of the picture.
Tint (G/R)
Adjusts the colour tint of the picture.
In TV, AV modes of the PAL system, you cannot use the Tint (G/R) Function.
When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
In PC mode, you can only make changes to Backlight, Contrast and Brightness.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be signicantly reduced if the brightness level of the picture is lowered, which will
reduce the overall running cost.
¦
❑
T
■
■
■
■
❑
■
■
■
■
■
■
N
N
N
N
N
7
U Move L Adjust E Enter R Return
▲
Backlight
▼
Mode :Standard ▶
Backlight :7
Contrast :95
Brightness :45
Sharpness :50
Colour :50
Tint(G/R) :G50/R50
AdvancedSettings
Picture
[7000]BN68-02077A-00Eng.indb 13 2009-03-11 �� 2:56:01

English - 14
Advanced Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous
models.
Advanced Settings is available in Standard or Movie mode.
In PC mode, you can only make changes to Dynamic Contrast, Gamma and White
Balance from among the Advanced Settings items.
BlackTone→Off/Dark/Darker/Darkest
You can select the black level on the screen to adjust the screen depth.
DynamicContrast→Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary colour (red, green, blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite colour space to experience the
most natural colour.
Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
Native: Native Colour Space offers deep and rich colour tone.
Custom: Adjusts the colour range to suit your preference.
Changing the adjustment value will refresh the adjusted screen.
Settings can be adjusted and stored for each external device you have connected to an input of the TV. For example, if
you have a DVD player connected to HDMI 1 and it is currently selected, settings and adjustments will be saved for the
DVD player.
Colour: Red, Green, Blue, Yellow, Cyan or Magenta
Colour is available when Colour Space is set to Custom.
In Colour, you can adjust the RGB values for the selected colour.
To reset the adjusted RGB value, select Reset.
Red: Adjusts the red saturation level of the selected colour.
Green: Adjusts the green saturation level of the selected colour.
Blue: Adjusts the blue saturation level of the selected colour.
Reset: Resets the colour space to the default values.
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset: Adjusts the red colour darkness.
G-Offset: Adjusts the green colour darkness.
B-Offset: Adjusts the blue colour darkness.
R-Gain: Adjusts the red colour brightness.
G-Gain: Adjusts the green colour brightness.
B-Gain: Adjusts the blue colour brightness.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone
You can emphasize the pink ‘flesh tone’ in the picture.
Changing the adjustment value will refresh the adjusted screen.
EdgeEnhancement→Off/On
You can emphasize object boundaries in the picture.
xvYCC→Off/On
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (ie. DVD player)
connected to the HDMI or Component IN jacks.
xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.
This function may not be supported depending on your external device.
❑
N
N
■
■
■
■
●
●
●
N
N

N
N
N




■
●
●
●
●
●
●
●
■
N
■
■
N
N
BlackTone :Off  ▶
DynamicContrast :Medium
Gamma :0
ColourSpace :Native
WhiteBalance
FleshTone :0
EdgeEnhancement :On
U Move E Enter R Return
AdvancedSettings
[7000]BN68-02077A-00Eng.indb 14 2009-03-11 �� 2:56:01

English - 15
Picture Options
In PC mode, you can only make changes to the Colour Tone and Size from among the
items in Picture Options.
ColourTone→Cool/Normal/Warm1/Warm2/Warm3
Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie.
Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes
with several screen size options, each designed to work best with specific types of video input. Your cable box/satellite receiver
may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.
Press the TOOLS button to display the Tools menu. You can also set the size by selecting Tools→PictureSize.
Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Screen Fit: Use the function to see the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i
/ 1080p) signals are input.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
In PC Mode, only 16:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
Wide Zoom: Press the ► button to Select Position, then press the ENTER E button. Press the ▲ or ▼ button to move
the picture up / down. Then press the ENTER E button.
Zoom: Press the ► button to Select Position, then press the ENTER E button. Press the ▲ or ▼ button to move the
picture up and down. Then press the ENTER E button. Press the ► button to Select Size, then press the ENTER E
button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTER E
button.
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing the
◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER E button. You can initialize the setting.
If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
When Double ( À , Œ ) mode has been set in PIP, the Picture Size cannot be set.
DigitalNR→Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
HDMIBlackLevel→Normal/Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
FilmMode→Off/Auto1/Auto2
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
Off: Turn the Film Mode function off.
Auto1: Automatically adjusts the picture for the best quality when watching a film.
Auto2: Automatically optimizes the video text on the screen (not including closed captions) when watching a film.
❑
N
■
N
N
■
T
O
●
●
●
●
●
N
N
N
N
N
N
N
N

N
N
■
N
■
N
■
N
●
●
●
ColourTone :Normal  ▶
Size :16:9
DigitalNR :Auto
HDMIBlackLevel :Normal
FilmMode :Off
100HzMotionPlus :Standard
BlueOnlyMode :Off
U Move E Enter R Return
PictureOptions
[7000]BN68-02077A-00Eng.indb 15 2009-03-11 �� 2:56:02

English - 16
100HzMotionPlus→Off/Clear/Standard/Smooth/Custom/Demo
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
If you enable 100 Hz Motion Plus, noise may appear on the screen. If this occurs, set 100Hz Motion Plus to Off.
Off: Switches 100Hz Motion Plus off.
Clear: Sets 100Hz Motion Plus to minimum.
Standard: Sets 100Hz Motion Plus to medium.
Smooth: Sets 100Hz Motion Plus to maximum.
Custom: Adjusts the blur and judder reduction level to suit your preference.
Blur Reduction: Adjusts the blur reduction level from video sources.
Judder Reduction: Adjusts the judder reduction level from video sources when playing films.
Reset: Reset the custom settings.
Demo: Displays the difference between 100Hz Motion Plus on and off modes.
BlueOnlyMode→Off/On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such
as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to
the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an
additional Blue Filter.
Blue Only Mode is available when the picture mode is set to Movie or Standard.
PictureReset→ResetPictureMode/Cancel
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to default settings.
Viewing Picture-in-Picture
You can use the PIP feature to simultaneously watch the TV tuner and one external video
source. This product has one built-in tuner, which does not allow PIP to function in the same
mode. Please see ‘PIP Settings’ below for details.
Press the TOOLS button to display the Tools menu. You can also configure PIP related
settings by selecting Tools→PIP.
If you select the PIP picture sound, refer to the ‘Configuring the Sound Menu’ instructions.
(refer to pages 18~19)
PIP Settings
Main picture Sub picture
Component
HDMI1(DVI), HDMI2, HDMI3, HDMI4
PC
TV, AV
If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.
You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game
or karaoke.
While Internet@TV is in operation, the PIP function cannot be used.
PIP→Off/On
You can activate or deactivate the PIP function.
Size→ Õ / à / À / Œ
You can select a size of the sub-picture.
Source
You can select a source of the sub-picture.
Position→ à / – / — / œ
You can select a position of the sub-picture.
In Double ( Œ , À ) mode, Position cannot be selected.
Channel
You can select the channel for the sub-screen.
Channel is available when the Source is set to TV.
■
N
●
●
●
●
●



●
■
N
❑
N
¦
T
N
N
N
N
N
❑
❑
❑
❑
N
❑
N
Melody :Medium
EnergySaving :Off
PIP  ▶
Setup
PIP :On  ▶
Size :
Õ
Source :TV
Position :
Ã
Channel :ATV4
U Move E Enter R Return
PIP
[7000]BN68-02077A-00Eng.indb 16 2009-03-11 �� 2:56:02

English - 17
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on
your PC will probably be different, depending upon your particular version of Windows and
your particular video card. However, even if your actual screens look different, the same basic
set-up information will apply in almost all cases. (If not, contact your computer manufacturer or
Samsung Dealer.)
1. First, click on ‘Control Panel’ on the Windows start menu.
2. When the control panel window appears, click on ‘Appearance and Themes’ and a display
dialog-box will appear.
3. When the control panel window appears, click on ‘Display’ and a display dialogbox will
appear.
4. Navigate to the ‘Settings’ tab on the display dialog-box.
The correct size setting (resolution) - Optimum: 1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box, the correct
value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed on the next page, the screen image has been optimized during manufacturing.
D-Sub and HDMI/DVI Input
Mode Resolution Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM 640 x 350 31.469 70.086 25.175 +/-
720 x 400 31.469 70.087 28.322 -/+
MAC 640 x 480 35.000 66.667 30.240 -/-
832 x 624 49.726 74.551 57.284 -/-
1152 x 870 68.681 75.062 100.000 -/-
VESA CVT
720 x 576 35.910 59.950 32.750 -/+
1152 x 864 53.783 59.959 81.750 -/+
1280 x 720 44.772 59.855 74.500 -/+
1280 x 720 56.456 74.777 95.750 -/+
1280 x 960 75.231 74.857 130.000 -/+
VESA DMT
640 x 480 31.469 59.940 25.175 -/-
640 x 480 37.861 72.809 31.500 -/-
640 x 480 37.500 75.000 31.500 -/-
800 x 600 37.879 60.317 40.000 +/+
800 x 600 48.077 72.188 50.000 +/+
800 x 600 46.875 75.000 49.500 +/+
1024 x 768 48.363 60.004 65.000 -/-
1024 x 768 56.476 70.069 75.000 -/-
1024 x 768 60.023 75.029 78.750 +/+
1152 x 864 67.500 75.000 108.000 +/+
1280 x 1024 63.981 60.020 108.000 +/+
1280 x 1024 79.976 75.025 135.000 +/+
1280 x 800 49.702 59.810 83.500 -/+
1280 x 800 62.795 74.934 106.500 -/+
1280 x 960 60.000 60.000 108.000 +/+
1360 x 768 47.712 60.015 85.500 +/+
1440 x 900 55.935 59.887 106.500 -/+
1440 x 900 70.635 74.984 136.750 -/+
1680 x 1050 65.290 59.954 146.250 -/+
VESA GTF 1280 x 720 52.500 70.000 89.040 -/+
1280 x 1024 74.620 70.000 128.943 -/-
VESA DMT /
DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+
When using an HDMI / DVI cable connection, you must use the HDMI IN 1(DVI) jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080).
¦
•
•
■
N
N
N
N
N
[7000]BN68-02077A-00Eng.indb 17 2009-03-11 �� 2:56:02

English - 18
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
Auto Adjustment
Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and
positions.
Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
by selecting Tools→AutoAdjustment.
This function does not work in DVI-HDMI mode.
Screen
Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and
Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on
the centre of screen.
PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust
the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
¦
N
❑
T
N
❑
■
■
■
SOUND
Configuring the Sound Menu
Mode→Standard/Music/Movie/ClearVoice/Custom
Press the TOOLS button to display the Tools menu. You can also set the sound mode by
selecting Tools → Sound Mode.
Standard: Selects the normal sound mode.
Music: Emphasizes music over voices.
Movie: Provides the best sound for movies.
Clear Voice: Emphasizes voice over other sounds.
Custom: Recalls your customized sound settings.
Equalizer
The sound settings can be adjusted to suit your personal preferences.
Mode: Selects the sound mode among the predefined settings.
Balance L/R: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment): To adjust the level of different bandwidth frequencies.
Reset: Resets the equalizer settings to the default values.
SRSTruSurroundHD→Off/On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
Press the TOOLS button to display the Tools menu. You can also set the SRS TruSurround HD by selecting Tools→SRSTS
HD.
¦
❑
T
●
●
●
●
●
❑
●
●
●
●
❑
T
Brightness :45
Sharpness :75
AutoAdjustment  ▶
Screen
AdvancedSettings
PictureOptions
PictureReset
Picture
Coarse   50
Fine   0
PCPosition
ImageReset
U Move E Enter R Return
Screen
Mode :Custom ▶
Equalizer
SRSTruSurroundHD :Off
AutoVolume :Off
SpeakerSelect :TVSpeaker
SoundSelect :Main
SoundReset
Sound
[7000]BN68-02077A-00Eng.indb 18 2009-03-11 �� 2:56:02