Samsung UN40EH6000 User manual

Figures and illustrations in this User Manual are provided for reference Transportation to and from the Service Center is the responsibility of
only and may differ from actual product appearance. Product design and the purchaser. Conditions covered are limited only to manufacturing
specifications may be changed withoat notice, defects in material or workmanship, and only those encountered
Important Warranty Information Regarding
Television Format Viewing
=_ See the warranty card for more informationon warranty
terms.
Wide screen format LED Displays (16:9, the aspect ratio of the
screen width to height) are primarily designed to vies!wide screen
format full-motion video. The images displayed on them should
primarily be in the wide screen 16:9 ratio format, or expanded to
fill the screen if your model offers this feature and the images are
constantly moving. Displaying stationary graphics and images on
screen, such as the dark sidebars on non- expanded standard
format television video and programming, should be limited to no
more than 5% of the total television viewing per week. Additionally,
viewing other stationary images and text such as stock market
reports, video game displays, station Iogos, web sites or computer
graphics and patterns, should be limited as described above for
all televisions. Displaying stationary images that exceed the above
guidelines can cause uneven aging of LED Displays that leave
subtle, but permanent burnedqn ghost images in the LED picture.
To avoid this, vary the programming and images, and primarily
display full screen moving images, not stationary patterns or dark
bars. On LED models that offer picture sizing features, use these
controls to vies! different formats as a full screen picture. Be careful
in the selection and duration of television formats you use for
viewing. Uneven LED aging as a result of format selection and use,
as well as burnedqn images, are not covered by your Samsung
limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED
WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations
of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions
and limitations contained herein, SAMSUNG will additionally
provide Warranty Repair Service in the United States on SAMSUNG
products purchased in Canada, and in Canada on SAMSUNG
products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a
SAMSUNG Authorized Service (}enter. Along with this Statement,
the Original Limited Warranty Statement and a dated Bill of Sale
as Proof of Purchase must be presented to the Service (}enter.
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
BN68 04214B 01
in normal use of the product. Excluded, but not limited to, are
any originally specified provisions for, in-home or on-site services,
minimum or maximum repair times, exchanges or replacements,
accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please
call toll-free:
-- In the United States : 1-800-SAMSUNG (1-800-726-7864)
-- In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (suchas jpeg picture files) or still
image elements (such as TV channel Iogos, TV shows or movies
in panorama or 4:3 format, stock or news scroll bars, etc.) on the
screen. The constant display of still pictures can cause ghosting or
image burnqn (image retention) on the LED screen, which will affect
image quality. To reduce the risk of this effect, please follow the
recommendations below:
- Avoid displaying the same TV channel for long periods.
- Always try to display any image in full screen mode. Use the TV's
Picture Options menu to select the optimal screen size.
- Reduce brightness and contrast values to the minimum required
to achieve the desired picture quality. Values that exceed the
minimum may speed up the burnqn process.
- Frequently use all TV features designed to reduce image retention
and screen burnqn. Refer to proper user manual section for
details.
Contact SAMSUNG WORLDWIDE u
If yo_ have any questions or comments re!ating to Samsung products, n
please Pontact the SAMSUNG oustomer care center,
Samsung Electronics
Canada hc, Customer
Service 55 Standish Court
Mississauga, Ontario LSR
4B2 Canada
Samsung Electlonics
America, Dc.
85 Chalbnger Road
Ridgefield Park, NJ
07660 2112
1 800 SAMSUNG(726 7864)
www samsung corn
= ............................................ =
@2012 Samsung Ebctronics Co., Ltd. All rights reserved.
To add channels to the Added Channels list, follow these steps:
1. Select one or more channels in the All Channels list using the
A/V buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add in the Tools menu, and then press the ENTER_
button.
_' All deleted channels will be shown on the All Channels list.
You add channels back to the Added Channels list on the
All Channels list.
'_' A gray-colored channel indicates the channel has been
deleted from the Added Channels list.
'_ The Add menu option only appears for deleted channels.
m Add to Favorite/Delete from Favorite: Lets you add channels
to and delete channels from your Favorites list.
To add channels to the Favorites list, follow these steps:
1. Select one or more channels in the All Channels list using the
A/V buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add to Favorite in the Tools menu, and then press the
ENTER _ button.
To delete channels from the Favorites list, follow these steps:
1. Select one or more channels in the Favorite Channels list
using the A/T buttons and the Yellow Select button on your
remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete from Favorite in theTools menu, and then
press the ENTER _ button.
m Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you are watching another
channel. You must set the current time first inthe Time > Clock
function to use Time Viewing.
To schedule a channel, follow these steps:
1. Select a channel inthe Added Channels list using the A/_'
buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Time Viewing inthe Tools menu, and then press the
ENTER _ button. The Time Viewing screen appears.
4. Use the _/1_ buttons to move from entry field to entry field
and the A/T buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
'_' If you select Everyday or Every Week, the date you
select in the Date field becomes the start date for your
scheduled viewing. For Everyday, the TV will turn on
every day, at the time you selected, starting from that
date. For Everyweek, the TV will turn on every week,
on the same day of the week as the start date you
selected, at the time you selected, from that day on. If
you select Once, the TV will turn on once, on the date
and time you selected.
5. Press the ENTER _ button on your remote when done.
_' Only Added Channels can be scheduled.
_' Scheduled programs and channels are displayed in the
Programmed List.
'_' When you select a digital channel, press the !_ button to
view the digital program list. Ifyou highlight a program in
the list, and then press the ENTERS(Schedule) button,
you set Timer Viewing for that program directly.
m Select All: Select all the channels in the displayed channel list.
m Deselect All: Deselect all the selected displayed channels.
'_' You can only select Deselect All when one or more
channels are selected.
m Channel Name Edit: Analog channels only. Lets you assign a
name of up to five characters to an analog channel. For example,
Hist, Food, Golf, etc. This makes it easier to find and select a
channel.
m Auto Program: See Auto Program under Memorizing Channels.
(_ Programmed List (on the Channel List Screen)
The Programmed list displays the channels and programs you
have scheduled for viewing using the Time Viewing function. You
can vies!, modify, or delete ashow you have scheduled using the
functions on the Programmed List screen Tools menu.
Programmed List Screen Tools Menu
m Change Info: Change the sctqeduling informationfor a show or
ctqannel you have sctqeduled.
To ctqange ttqe information,follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel
entry you want to change, and then press the TOOLS button.
The Tools Menu appears.
3. Select Change Info, and then press ttqe ENTER _ button.
The Time Viewing screen appears.
4. Use ttqe _1/!_ buttons to move from entry field to entryfield
and the A/_' buttons to change the entries. Wtqerenumbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
5. Press the ENTER _ button wtqen done.
m Cancel Schedules: Cancel a show or ctqannel you have
scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER_ button.
2. On the Programmed List screen, select the show or channel
entry you want to cancel, and ttqen press ttqeTOOLS button.
The Tools Menu appears.
3. Select Cancel Schedules, and ttqenpress ttqe ENTER
button. The Cancel Schedule screen appears.
4. Select OK, and then press the ENTER _ button.
-5-
' Advanced Settings
_ Available in Standard and Movie mode only.
Your TV has two kinds of menus, the Main menu and the various Compared to previous models, new Samsung TVs offer a more
Tools menus. The Main menu gives you access to most or all of precise picture with more precise controls.
the menu options available on your TV. The Tools menus display
a selected number of frequently used menu options that change =z When your TV is connected to a PC, you can only make
depending on the screen you are viewing. A Tools menu symbol changes to Gamma and White Balance.
(_'3) in the lower right side of the screen indicates that a Tools menu m Color Space (Auto /Native): Auto automatically matches the
is available, range of colors available to create pictures to the color range of
The Main menu has seven primary categories:
"Picture o Input
"Sound o Application
"Channel o Support
-Setup
Toview the Main menu, press the MENU button on your remote. To
vies! a Tools menu, press the TOOLS button on your remote.
'_' The menu options that appear in the Main menu depend
on the Source you have selected. For example, if you have
selected the HDMI source, the Channel category will not
appear. To see the Channel category, you must first select TV
in the Source List.
The Menu options are presented below, arranged by Main menu
categories. A Tools button symbol (J_l_l) next to an option
name indicates the option is also available in one of the Tools
menus.
Mode
Select your preferred picture mode.
'_' When your TV is connected to a PC, you can only select
Entertain and Standard.
m Dynamic: Brightens the screen. Suitable for a bright room.
m Standard: Suitable for a normal normal.
m Movie: Darkens the screen, making it less glary. Suitable for
watching movbs in a darkened room.
m Entertain: Sharpens the picture. Suitable for games.
_ Only available when the TV is connected to a PC.
Backlight /Contrast /Brightness /Sharpness /
Color /Tint
Backlight: Adjusts the brightness of the screen by adjusting the
brightness of the individual pixeIs.
Contrast: Increases or decreases the contrast between dark and
light areas of the picture.
Brightness: Adjusts the brightness of the screen. Not as
effective as Backlight.
Sharpness: Sharpens or dulls the edges of objects.
Color: Adjusts the color saturation. The higher the Color setting,
the more intense the color. Los! settings remove color and the
picture becomes black, white and gray.
Tint: Adjusts the amount of green and red in the picture. As you
increase the amount of green, the amount of red decreases and
vice versa.
'_' When the TV isconnected to a PC, you can only make
changes to ight, Contrast, Brightness, and Sharpness.
the video source. Native provides a color range wider than the
color range of the video source.
[] White Balance: Adjusts the color temperature of the picture so
that white objects look white (instead of, for example, slightly
pink or slightly yellow) and the overall color of the picture looks
natural.
R-Offset /G-Offset /B-Offset: Adjusts each color's (red,
green, blue) darkness.
R-Gain /G-Gain /B-Gain: Adjusts each color's (red, green,
blue) brightness.
Reset: Resets the White Balance to it's default settings.
[] Gamma: Adjusts the primary color intensity.
[] Dynamic Contrast (Off /Low /Medium /High): Adjusts the
screen contrast.
[] Black Tone (Off/Dark/Darker/Darkest): Selects the black
level to adjust the screen depth. Darker settings make blacks
look darker.
[] Flesh Tone: Adjusts the amount of red in skin tones.
[] Motion Lighting (Off /On): When on, the TVautomatically
adjusts the brightness of the screen in response to the
brightness of the room. In bright light, the screen brightens. In
dim light, the screen dims.
'_' Available in Standard mode only.
Picture Options
'_' When the TV is connected to a PC, you can only make
changes to the Color Tone, Size and HDMI Black Level.
[] Color Tone (Cool /Standard /Warm1 /Warm2): Cool makes
the picture bluer (cooler). Warm 1 and Warm 2 make the picture
redder (warmer).
'_' Warmt and Warm2 are deactivated when the picture
mode is set to Dynamic.
[] Size: Set the size and aspect ratio of the picture on the screen.
Your cable box or satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use
the TVs 16:9 mode most of the time.
16:9: Sets the picture to the 16:9 wide screen format.
Zoomt : Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.
Zoom2: Provides larger magnification of the picture. Sides, top,
and bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture
fits the entire screen.
4:8: Sets the picture to the old, 4:3 format and puts black or gray
borders on the right and left of the picture.
'_' Do not watch your TV in the 4:3 format for a long time.
Traces of borders displayed on the left, right and center of
the screen may cause image retention (screen burn) which
is not covered by the warranty.
Screen Fit: Displays thefull image without any cut-off when
your TV is inputting HDMI (720p /1080i /1080p) or Component
(1080i/1080p) HD signals.
_' HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
(1920x1080) or 720p (1280x720) resolution.
_' You can adjust and store settings for each external device you
have connected to an input on the TV. Picture Sizes available
by Input Source are listed below:
-2-
[] Information: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1. Select the Programmed List icon on the left side of the
Channel List screen, and then press the ENTER _ button.
2. On the Programmed List screen, select the show or channel
entry you want information for, and then press the TOOLS
button. The Tools Menu appears.
3. Select Information, and then press the ENTER_ button.
The Time Viewing Information screen appears.
4. Select Change Info and press the ENTER _ button
to change information, or select Close and press the
ENTER _ button to close the information screen.
[] Select All /Deselect All: You can select or deselect all
channels in the channel list.
_3 Other Channel Menu Functions
Channel Mode (Added Channels/Favorite
Channels)
Lets you select the channel list displayed when you press the
ACHV (Channel) button on your remote. For example, ifyou
select Favorite Channels, you will only see Favorite channels when
you press the ACHV button.
Fine Tune
Analog channels only.
If the reception is clear,you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel
manually.
'_' Select the channel, and then select Fine Tune.
'_' Fine tuned channels that have been saved are marked with
an asterisk "*" on the right-hand side of the channel number
in the channel banner.
'_' To reset fine-tuning, select the channel, select Fine Tune, and
then select Reset on the Fine Tune screen.
Plug & Play
Lets you re-run the Plug & Play initial setup procedure. For
instructions, see your Quick Start Guide.
Language
Set the menu language.
_' Choose between English, Espa_ol, and Francais.
_3Setting the Time
Time
'_' The time you set will appear when you press the INFO
button.
[] Clock: Set the clock so you can use the various timer features
of the TV.
'_' Ifyou disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps:
1. Select Setup >Time > Clock.
2. Press ENTER _ and select Auto or Manual, and then press
ENTER _ again.
If you selected Auto:
The TV will automatically download the correct time from a
digital channel.
- Select Time Zone, and then press the ENTER_ button.
Use the_,/_!' buttons to select your Time Zone, and then
press ENTER _.
- Select DST (Daylight Savings Time), and then press
ENTER _. Select On if you want to turn the DST
adjustment on and off manually. Select Off to turn off the
DST adjustment. Select Auto if you want the TV to adjust
to DST automatically. Press ENTER_ when done.
'_' DST and Time Zone function are only available when
the Clock Mode is set to Auto.
If you selected Manual:
The Clock Set screen appears. Use the _/_ buttons to
change the values in each field or use the number buttons to
enter the values directly. Use the _1/1_ buttons to move from
field to field. When done with all the fields, press ENTER _.
'_ Available only when Clock Mode is set to Manual.
[] Sleep Timer
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
'_' To cancel the Sleep Timer, select Off.
Timer 1/Timer 2/Timer 3
Turns the TV on and off automatically at times and days you
select. You can set three different on/off timer settings.
'_' You must set the clock first.
[] On Time /Off Time: Set the hour, minute, am/pm, and
Activate/Inactivate fields for the On Time and Off Time. Use the
_1i/1_buttons to move from field to field. Use the A/_ buttons
to change the values in each field. To activate the timer with
the setting you have chosen, set the Activate/Inactivate field to
Activate.
[] Volume: Set the desired loudness.
[] Contents: To select what will be turned on when the timer
setting is activated. You can set the TV to turn on a specific
channel or play back contents such as photo or audio files.
Use the _1/_ buttons to move to move to the Contents field,
and then press the ENTER _ button. The Contents screen
appears. Use the _1/1_ buttons to move from field to field. Use
the &/_' buttons to change the values in each field.
- TV/USB: Select TV or USB. The USB device must be
connected to your TV before you can select USB.
- Antenna: Displays the current antenna source, Air or Cable.
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on
the USB device:
'_' The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
'_' The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the _1/_ buttons to move to the field under Music
or the field under Photo, and then press the ENTER
button. The TVdisplays a single folder (the Root folder)
and the type or name of the device.
-6-
16:9, Zoom1, Zoom2,
ATV,AV,Component (480i,480p) 4:3
DTV(1080i, 1080p),Component (1080i, 16:9, Wide Fit, 4:3,
1080p), HDMI(720p, 1080i, 1080p) Screen Fit
[] Digital Noise Filter (Off /Low /Medium /High /Auto) : If the
broadcast signal received by your TV isweak, you can activate
the Digital Noise Filter feature to reduce any static and ghosting
that may appear on ttqe screen.
'z Wtqen the signal isweak, try all the Digital Noise Filter
options until the TV displays the best picture.
[] HDMI Black Level (Normal /Low) : For HDMI signals, select
the black level to adjust the screen depth. Low make blacks look
darker.
'_ Available only in HDMI mode (RGB signals).
[] Film Mode (Off /Auto) : Sets the TV to automatically sense and
process film signals from allsources and adjusts the picture for
optimum quality.
'z Available in ATV, DTV (interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i/1080i).
[] Auto Motion Plus (Off /Clear /Standard /Smooth /Custom /
Demo): Enhances motion in fast moving scenes.
'z The info screen on your TV displays ttqe resolution and
frequency of the incoming video signal (60Hz). This
displayed frequency is not what the TV is displaying by
using the Auto Motion Plus function.
[] LED Motion Plus (Off /On): Removes drag from fast scenes
wittq a lot of movement to provide a clear picture.
Picture Reset
[] Picture Reset (Reset Picture Mode/Cancel): Resets the
picture settings to ttqeirfactory defaults.
Mode
[] Standard: Selects the normal sound mode.
[] Music: Emphasizes music over voices.
[] Movie: Provides the best sound for movies.
[] Clear Voice: Emphasizes voices over other sounds.
[] Amplify: increase the intensity of high-frequency sounds to allow
a better listening experience for the hearing impaired.
Equalizer
Available in Standard sound mode only.
[] Balance L/R: Adjusts the balance bets!een the right and left
speaker.
[] 100Hz /300Hz /1KHz /3KHz /10KHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
[] Reset: Resets the equalizer to its default settings.
SRS TruSurround HD (On/Off)
Available in Standard sound mode only.
SRS TruSurround HD is a patented SRS technology that solves
the problem of playing 5.1 multichannel content through two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all
multichannel formats.
2. Press the ENTER _ button. A list of folders on the device
appears.
'_' If there are no folders on your device, press the
Yellow select button to select the Root folder, and
then press the RETURN button. The Timer screen
re-appears.
3. Use the A/_' buttons to highlight a bider that contains
music or photos, and then press the Yellow select button
to select the folder.
4. Press the RETURN button. The Timer screen re-appears.
[] Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun
or Manual. If you select Manual, you can select the days you
want to activate the timer by using the _1/i_ buttons to highlight
the day, and then pressing the ENTER _ button. To unsebct a
day, highlight it, and then press the ENTER_ button.
When you finished making all your selections on the Timer screen,
press either the ENTER _ or RETURN button.
_3 Other Features
Program Rating Lock
The Program Rating Lock feature letsyou block programs
you've determined are inappropriate for your children based on
the program's ratings. To access the Program Rating Lock
feature and make any changes, you must enter a PIN (personal
identification number). Towatch a blocked program, you must also
enter the same PIN.
'_' Program Rating Lock is not available in HDMI or
Component mode.
'_' The default PIN number of a new TV set is "0-0-0-0". You can
set your own PIN using the Change PIN function.
How It Works
When you access the Program Rating Lock Menu functions for
the first time, the PiN input screen appears. Enter 0-0-0-0. The PiN
screen closes and the Program Rating Lock Menu appears. Every
time you access the Program Rating Lock functions, the PIN
screen will appear and you must enter a PiN.
When the Rating Lock screen appears, select Program Rating
Lock, and then press ENTER _. Select On, and then press the
ENTER _ key again. Depending on what type of programs or
movies you want to block, select one of the options on the screen,
and then press the ENTER _ button. The options are listed below:
[] TV Parental Guidelines: You can block TV programs based
on their ratings. This function allows you to control what your
children are watching.
[] MPAA Rating: You can block movbs based on their MPAA
ratings. The Motion Picture Association of America (MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children.
[] Canadian English: You can block TV programs based on their
Anglophone Canadian ratings.
[] Canadian French: You can block TV programs based on their
French Canadian ratings.
[] Downloadable U.S. Rating: Parental restriction information can
be used while watching DW channels.
Preferred Language
Digital channels only.
DigitaI-TV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program
intoforeign languages).
'_' You can only select a language from among the ones being
broadcast.
Multi=Track Sound (MTS)
Analog channels only.
[] Mono: Select for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
[] Stereo: Select for channels that are broadcasting in stereo.
[] SAP: Select to listen to the Separate Audio Program, which is
usually a foreignqanguage translation.
'_' Depending on the program being broadcast, you can listen to
Mono, Stereo or SAR
Auto Volume
Because each station has its own broadcasting conditions, the
volume may fluctuate each time you change the channel. This
feature automatically adjusts the volume of a channel by lowering
the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is los!.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an
uncompressed digital audio signal when you connect the digital
audio jack on the back of the TV to a digital audio in jack on a
receiver or home theater.
[] Audio Format (POM/Dolby Digital): You can select the Digital
Audio output (SPDIF)format. The available Digital Audio output
format may differ depending on the input source.
'_' By connecting the TV to a receiver or home theater with
Dolby Digital and 5.1ch speakers and selecting Dolby
Digital, you can maximize your interactive 3D sound
experience.
[] Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the
slider. Press ENTER_ when done (0ms _ 250ms).
Speaker Settings
[] Speaker Select (External Speaker /TV Speaker)
Ifyou are listening to the sound track of a broadcast or movb
through an external receiver, you may hear a sound echo caused
by the difference in decoding speed between the TV's speakers
and the speakers attached to your audio receiver. Ifthis occurs,
set the TV to External Speaker.
'_' When you set Speaker Select to External Speaker, the
TV's speakers are turned off. You will hear sound through
the external speakers only. When you set Speaker Select
to TV Speaker both the TV's speakers and the external
speakers are on. You will hear sound through both.
'_' When Speaker Select is set to External Speaker, the
VOLUME and MUTE buttons will not operate and the
sound settings will be limited.
'_' If there is no video signal, both the TV's speakers and the
external speakers will be mute.
Sound Reset
[] Reset All: Resets all sound settings to the factory defaults.
-3-
Locking/Blocking Programs or Movies
You lock or block programs and/or movies in essentially the same
way for each option. Each option displays a grid or table. All the
tables have ratings listed on the left. The TV Parental Guidelines
option also has kinds of content listed across the top: ALL: Lock all
TV ratings. /FV: Fantasy violence /V: Violence /S: Sexual situation
/L: Adult Language /D: Sexually Suggestive Dialog.
To lock/block movies or shows with certain ratings and/or kinds of
content, click the square next to the rating and/or under the kind of
content. A lock appears. To unlock/unblock, click the square again.
When you click a low rating, all the ratings above it will also display
locks. You can also Allow All or Lock All. When done, press the
RETURN button on your remote.
[] Change PIN: The Change PIN screen will appear. Choose any
4 digits for your PIN and enter them in Enter New PiN fields.
Re-enter the same 4 digits in Confirm New PIN fields. When the
Change PIN screen disappears, press the OK button. The TV
has memorized your new PIN.
'_' If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to "0-0-0-0" :
POWER (off) _ MUTE _ 8 _ 2 _ 4 _ POWER (on)
Game Mode (On/Off)
When you connect a game console such as a PlayStation TM
or Xbox TM to your TV, you can enjoy a more realistic gaming
experience by turning on the Game Mode function.
'_' Precautions and limitations for game mode:
* Before you disconnect the game console and connect another
external device, set Game Mode to Off in the setup menu.
* If you display the TV menu in Game Mode, the screen shakes
slightly.
'_' Game Mode is not available when the input source is set to
TV.
'_' After connecting the game console, set Game Mode to On.
You may notice slightly reduced picture quality.
(On-Screen Text Dialogue)
[] Caption: You can switctq the caption function on or off. If
captions are not available, they will not be displayed on the
screen.
'_' The Caption feature does not work in Component or
HDMI mode.
[] Caption Mode: You can select the desired caption mode.
Default /OO1 ~O04 /Text1 ~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel
mode orwhen a signal is supplied from an external device to the
TV. (Depending on the broadcasting signal, the Analog Caption
function may or may not work with digital channels.)
Default /Service1 ~Service6 /OO1~004 /Text1 ~Text4:
(Digital channels only) The Digital Captions function works with
digital channels.
'_' Service1~6 may not be available in digital caption mode
depending on the broadcast.
[] Digital Caption Options: (Digital channels only)
Size: Options include Default, Small, Standard and Large. The
default is Standard.
Font Style: Options include Default and Styles 0 to 7. The
default is Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
color of the letters. The default is White.
-7-
_3 Memorizing Channels
When you first set up your TV using Plug & Play, the TV memorized
the channels that were available over the air or through your cable
system and added them to the Channel List. The Antenna and
Auto program functions described below let you re-run the channel
memorization function without having to re-run the Plug & Play
procedure.
_3 Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from the Added Channels list, schedule channels
or programs for viewing. Watch a channel by selecting the channel
in the All Channels, Added Channels, or Favorite screen, pressing
the A /_ buttons, and then pressing the ENTER _ button.
Antenna (Air /Cable)
Before your televbion can memorize ttqeavailable channeB, you
must select your TV's signal source, Air (using an antenna) or Cable.
Select Menu >Channel > Antenna > Air or Cable. After you have
selected ttqesignal source, go on to the Auto Program function.
Selecting the signal source using the Antenna function also
determines ttqe signal source the TV is tuned to. For example,
ifyou receive your TV signal over the air, and you select Cable,
you will see only snow. You must select Air to see a picture.
The Auto Program function memorizes all channeb that are
available over the air or througtq your cable system and adds them to
the Channel List.
To start Auto Program, follow these steps:
1. Pustq MENU ITR_ Channel _ ENTER _ on your remote. The
Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV
signal.
Air
Ifyour TV is connected to an antenna choose Air, and ttqenpress
ENTER _. The TV will automatically start memorizing channeb.
Cable
Ifyour TV is connected to a cable outlet, choose Cable, and then
press ENTER _. Go to Step 3.
Auto
If you choose Auto, and then press ENTERS, the TV will
automatically select the correct Antenna source. Go to
Step 3.
3. On the (}able Type screen, use the _1/!_/_/_' buttons to select
the type of digital and analog cable systems you have: STD, HRC,
or IRC. Most systems are STD (Standard). When done, select
Start, and then press ENTER _. The TV will start memorizing
channeb.
Channel List Screens icons are listed on the left side. Select an
icon using the _/_' buttons to view each list.
[] _ All Channels: Shows all currently available channels includng
those you deleted from the Added Channels
list.
[] _ Added Channels: Shows all Added channels. These are the
channels that appear when you press the CH button.
[] _ Favorite: Shows all favorite channels.
[] (_ Programmed: Shows all channels and programs currently
scheduled using Timer Viewing.
Remote control buttons active on the Channel List screen.
° Green (Zoom): Enlarges or shrinks a channel number.
° Yellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A ,7 mark appears. Repeat to select
additional channels. Then, openthe Toolsmenu and apply a
function to the channels you selected.
o r_ (Tools): Displays the Channel List Tools menu. (TheTools
menus may differ depending on the situation.)
Display icons Used in the Channel List Screens
!_
-7 A selected ctqannel.
A Favorite ct_annel.
(_) A reserved program.
I_ A program currently being broadcast.
Channel memorization can take up to 45 minutes, depending _ The Channel List Tools Menu
on your cable system.
'_' Memorized channels are added to the Added Channels
list. These are the channels you will see when you use the
Channel buttons on your remote.
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20_30 minutes.
'_' Press the ENTER_ button to stop the Clear Scrambled
Channel.
_' This function is only available in Cable mode.
The Channel List '[bob menu contains most of the functions you
can use on the All Channel, Added Channels, and Favorite List
screens. To view, select a list screen, select a channel, and then
press the TOOLS button,
[] Add /Delete: Delete a channel from or add a channel to the
Added Channels list.
To delete channels from the Added Channels list, follow these steps:
1. Select one or more channels in the Added Channels list using
the _/_' buttons and the Yellow Select button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Delete in the Tools menu, and then press the ENTER
button.
-4-
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the captions. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options
include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent,
Solid and Flashing.
Return to Default: This option sets each Size, Font Style,
Foreground Color, Background Color, Foreground Opacity and
Background Opacity to its default.
'_' Digital Caption Options are available only when you can
select Default and Service1 ~ Service6 in Caption Mode.
'_' The Foreground and Background cannot be set to the
same color.
Melody
Lets you control whether a melody plays when the TV is turned on
or off.
_' The Melody does not play:
° When no sound is output from the TV because the MUTE
button has been pressed.
° When no sound is output from the TV because the volume
has been reduced to minimum with the VOL -button.
° When the TV is turned off by the Sleep Timer function.
[] Reset: Reset all settings to the factory defaults.
'_ The PIN input screen appears before the setup screen.
'_' Enter your 4-digit PIN. Change the PIN using the Change
PiN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the
TV.
Contact Samsung
Vies! this information when your TV does not work properly or
when you want to upgrade the softs!are. You can find information
regarding our call centers and how to download products and
software.
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
Auto Protection Time _3 Connecting a USB Device
[] Auto Protection Time (Off /10 rain /20 min /40 rain /1hour):
Ifthe screen remains idle with a still imagefor a certain period 1. Turn on your TV.
of time you define, the screen saver is activated to prevent the
formation of ghost images on ttqescreen.
Eco Solution
[] Energy Saving (Off /Low /Medium /High /Picture Off) :
This adjust the brightness of the TV in order to reduce power
consumption. Ifyou select Picture Off, the screen is turned
off, but the sound remains on. Press any button except volume
button to turn on the screen.
[] Eco Sensor (Off /On): To enhance your power savings; the
picture settings will automatically adapt to the light in the room.
'_' Ifyou adjust the Backlight, the Eco Sensor will be set to
Off.
Min. Backlight: When Eco Sensor is On, the minimum screen
brightness can be adjusted manually.
'_' If Eco Sensor is On, the display brightness may change
(become slightly darker in most cases) depending on the
surrounding light intensity.
[] No Signal Power Off (Off /15 rain. /30 rain. /60 rain.): Sets
how quickly the TV switches to standby mode, if no picture is
being received.
'_ Disabled when the PC is in power saving mode.
[] Auto Power Off (Off /On): The TV will be automatically turned
off when no user operation is received for 4 hours.
_nosis
[] Picture Test: Use to ctqeckfor picture problems. If the problem
appears in the test picture, select Yes and follow the directions
on the screen.
[] Sound Test: Use the builtqn melody sound to check for sound
problems. Ifttqe problem occurs during the test, select Yes and
follow the directions on the screen.
[] Signal Strength: (Digital channels only) An HD channel's
reception quality is either perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
-8-
2. Connect a USB device containing photo, music, and/or movie
files to tt_e USB jack on the back of the TV. A pop up window
appears.
3. Press the MED_A,P button on your remote. The Media Play
menu appears.
_3 Using the Media Play Menu
To open Media Play in the Menu, follow these steps:
1. Press the MENU button. Then, press ttqe A or • button to
select Application on the left, and then press ttqe ENTER
button.
2. Press the • or _' button to select Media Play (USB), and then
press the ENTER _ button.
3. Press the _1 or !_ button to select an icon (Videos, Music,
Photos, Settings), and then press the ENTER _ button.
_' Media Play might not work properly with unlicensed
multimedia files.
_' Need-to-Know List before using Media Play (USB)
° The file system supports FAT16, FAT32 and NTFS.
° Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
° Media Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV's USB
port. USB HDD is not supported.

°BeforeconnectingyourdevicetotheTV,pleasebackupyour
filestopreventthemfromdamageorlossofdata.SAMSUNGis
notresponsibleforanydatafiledamageordataloss.
°AUSBdevicethatrequireshighpower(morethan0.5A)maynot
besupported.
°DonotdisconnecttheUSBdevicewhileitisloading.
°Thehighertheresolutionoftheimage,thelongerittakesto
displayonthescreen.
°ThemaximumsupportedJPEGresolutionis15360x8640pixels.
°IfafileiscorruptedortheTVdoesnotsupportthefiletype,the
"NotSupportedFileFormat"messageappears.
°TheTVcannotplayMP3fileswithDRMthathavebeen
downloadedfromafor-paysite.DigitalRightsManagement
(DRM)isatechnologythatsupportsthecreation,distribution,
andmanagementofdigitalcontentinanintegratedand
comprehensiveway,includingprotectingtherightsandinterests
ofcontentproviders,preventingillegalcopyingofcontents,and
managingbillingandsettlements.
°PTPdevicesarenotsupported.
°Ifanover-powerwarningmessageisdisplayedwhileyouare
connectingorusingaUSBdevice,thedevicemaynotbe
recognizedormaymalfunction.
°IftheTVhasnoinputduringthetimeperiodsetinAuto
ProtectionTime,theScreensaverwillrun.
°Thepower-savingmodeofsomeexternalharddiskdrivesmay
bereleasedautomaticallywhenyourconnectthemtotheTV.
°IfyouuseaUSBextensioncable,theTVmaynotrecognizethe
USBdeviceormaynotbeabletoreadthefilesonthedevice.
°IfaUSBdeviceconnectedtotheTVisnotrecognized,thelistof
filesonthedeviceiscorrupted,orafileinthelistisnotplayed,
connecttheUSBdevicetoaPC,formatthedevice,andcheck
theconnection.
°IfafileyoudeletedfromthePCisstillfoundwhenyourunMedia
Play,usethe"EmptytheRecycleBin"functiononthePCto
permanentlydeletethefile.
°Photosonlysupportsthesequentialjpegformat.
°TheVideosoptiondoesnotsupportthescenesearchand
thumbnailfunctions.
°IfthenumberoffilesandfolderssavedonaUSBstoragedeviceis
overapproximately4000,thefilesandfoldersmaynotappearand
somefoldersmaynotopen.
°Themaximumdisplayednumberoffiles,includingsubfolders,in
onefolderofUSBstoragedeviceis2000.
°Themediamaynotbeplayingsmoothlywhenusingthedevice
lowerthanUSB2.0.
Videos
1. In the Media Play menu, press the _ or !_ button to select
Videos, and then press the ENTER_ button.
2. Press the _/I_/A/T buttons to select a video kl the file list.
3. Press the ENTER _ button or [_ (Play) button.
The fib name is displayed on the top of the screen with the
playing time.
If video time information is unknown, playing time and the
progress bar are not displayed.
During video playback, you can search using the -qland
_. buttons.
'_' In this mode, you can play movie clips contained in a game,
but you cannot play the game itself.
-9-
'_ Supported Subtitle Formats
External
MPEG4 timed text
SAMI
SubRip
SubViewer
MicroDVD
SubStationAlpha
AdvancedSubStationAlpha
Internal
Xsub
SubStationAlpha
AdvancedSubStationAlpha
SubRip
MPEG4 Timedtext
'_ Supported Video Formats
ttxt
sml
srt
sub
.subor txt
ssa
ass
i!iiiiiiiiiiiiiiiii!_!_ii_i!!i!!i!!i!!i!!i!!iii!ii!ii!!il
AVI
MKV
MKV
MKV
MP4
PictureFormat
TextFormat
TextFormat
TextFormat
TextFormat
DivX
3 11/4x/5 1 1920x1080 6-30 30Mbps
/60
*rap4 MP4 H264 1920x1080 6-_30 30Mbps
AVC 1920x1080 6-_30 30Mbps
MJPEG 640x480 6-_30 10Mbps
DivX
3 11/4x/5 1 1920x1080 6-30 30Mbps
/60
*avi AVl, MPEG4 SP 1920x1080 6-_30 30Mbps
*mkv MKV /ASP
H264 1920x1080 6-_30 30Mbps
MJPEG 640x480 6-_30 10Mbps
DivX 3 11
/4x/5.1 1920x1080 6-_30 30Mbps
/60
ASF MPEG4 SP 1920x1080 6-_30 30Mbps
/ASP
H.264 1920x1080 6-_30 30Mbps
*ts MPEG2 1920x1080 6-_30 30Mbps
TS H 264 BP 1920x1080 6-_30 30Mbps
*m2ts /MP /HP
MPEG1 1920x1080 24/25/30 30Mbps
*dat MPEG2 1920x1080 24/25/30 30Mbps
PS H 264 BP
*rob /MP /HP 1920x1080 6-_30 30Mbps
MPEG4 SP 1920x1080 6-_30 30Mbps
*3gp 3GPP /ASP
H.264 1920x1080 6-_30 30Mbps
H.264 1920x1080 6-_30 30Mbps
*fly flash
*swf formats Sorenson 1920x1080 6-_30 30Mbps
H.263
MP3 /
ADPCM /
AAC
MP3 /
AC3 /
LPCM /
ADPCM
/DTS
Core
MP3 /
AC3 /
LPCM /
ADPCM
/WMA
/WMA
Pro
AC3 /
AAC /
MP3 /
DD+ /
HE AAC
AC3 /
MPEG /
LPCM /
AAC
MP3
MP3
Trouble Powering On Before you turn the TV on, find the red light on the right or left bottom of your TV. Press the power on button
on the TVor remote and the light should blink about 5 times before the TV turns on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check it
before making a call to the service department.
,, If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you
press the power button, your PC isinsleep mode. To take your PC out of sleep mode, press a key on your
keyboard or move the mouse. Then try turning your TV on.
If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a
signal. To test the signal output ofyour cable or satellite box, press the guide or info button on the cable or satellite
box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Stand Assembly • If you have any trouble assembling the stand, refer to "Install the Stand" in the Start Up or Stand Intallation Guide.
Cannot find a channel • Re-run Plug & Play or run Auto Program. (go to MENU - Channel - Auto Program)
Poor Picture First, perform the Picture Test and tQsee if your TV is disp!aying the test image prqperly.
Go to MENU :Suppert ; Self Diagnosis = Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
it did in the store, deliver HD (high definition) picture quality.
Cable/Satellite subscribers: Try HD channels from the channel line up.
Air/Cable Antenna connection: Try HD channels after running Auto Program.
=& Many HD channels broadcast up scaled SD (Standard Definition) content. The picture quality of up
scaled SD content is low.
Adjust the Cable/Set top box video output resolution to 1080i or720p.
The picture is distorted: macroblock • Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
error, small block, dots, pixelization, sports and action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Color is wrong or missing. • If you're using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or ablank screen.
There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode /Color /Brightness /Sharpness)
• Adjust the Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to the default picture settings. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of • If the picture size is set to Screen Fit, change it to 16:9.
the screen. • Change the cable/satellite box resolution.
The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of Component Input 1
on the TV.
When changing channels, the picture • If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It
freezes or is distorted or delayed, may take up to 20 minutes)
Set the output resolution of the cable box to 1080i or 720p.
Sound Problems Peflorm the Sound Test to Confirm that your R/audio isproperly operating.
(go to MENU :Supp0rt :Self Diagngsis _ Sound Test)
If the audio is OK, the sound problem may be caused by the source or signal.
There is no sound or the sound is too • Check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
low at maximum volume.
The picture is good, but there is no • If you are using an external device, check the device's audio output option Ex. you may need to change your
sound, cable box's audio option to HDMI if the box is connected to your TV using an HDMI cable.
• Reboot the connected device by reconnecting the device's power cable.
The speakers are making an • Check the cable connections. Make sure a video cable is not connected to an audio input.
inappropriate noise. • For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
No Picture, No Video
The TVwill not turn on. • Make sure the AC power cord issecurely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to 'Remote control does not work' below.
The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged securely into the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
ifthere is no signal.
Other Restrictions Photos
,* Video content will not play, or not play correctly, if ttqere is an error
in the content or the container.
,* Sound or video may not work if the contents have a standard
bit rate,/frame rate above the compatible Frame/sec listed in the
Supported Video Formats table.
,_If the Index Table erroneous, the Seek (Jump) function is not
supported.
,* The menu may take longer to appear if the video's bit rate
exceeds 10Mbps.
,*Video content can not be played ifthere are many contents in 1. In the Media Play menu, press the _lior _. button to select
one file. Photos, then press the ENTER _ button.
2. Press the _i/_/_,/_ buttons to select a photo in the file list.
Supports up to H.264, Level 4.1
H.264 FMO /ASO /RS, VC1 SP /MP /AP L4 and AVCHD are
not supported.
MPEG4 SP, ASP :
- Below 1280 x 720:60 frame max
- Above 1280 x 720:30 frame max
H.263 is not supported.
GMC is not support.
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR
mode of WMA Pro is not supported)
WMA Lossless is not supported.
Music
1. In the Media Play menu, press the _ or !_ button to select
Music, and then press the ENTER_ button.
2. Press the _li/l_/A/_' buttons to select the desired Music in the
file list.
3. Press the ENTER _ button or _ (Play) button.
'_' During music playback, you can search using the _ and
button.
'_' [_ (REW) and [_ (FF) buttons do not function during
play.
'_' Media Play only displays flies with MP3 and PCM file
extension. Other file extensions are not displayed, even if they
are saved on the same USB device.
'_' If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An ovePmodulated MP3 file
may cause a sound problem.)
3. Press the ENTER _ button or [_ (Play) button.
'_' NOTE
* While a photo list is displayed, press the _ (Play) /ENTERS4 _
button on the remote control to start a slide show.
* All files in the file list section will be displayed in the slide show.
* During the slide show, files are displayed in order.
* During the slide show, you can adjust the slide show speed
using (_) (REW) or ([_) (FF) button.
* You can move to other files using *_ or _ button.
_' Media Play can play Music files automatically during a Slide
Show if Background Music is set to On.
'_, You cannot change the Mode in Background Music until the
Background Music file has finished loading.
Supported Photo Formats
JPEG Base-line 15360 x 8704
' I Progressive I 1024 x 768
Other Restrictions
"CMYK, YCCK Color space JPEG are not supported.
Playing Multiple Files
[] Playing selected video/music/photo files
1. On the File List screen, highlight a file, and then press the Yellow
button on your remote.
2. Repeat Step 1 to select multiple files.
_' NOTE
* A _ mark appears to the left of the selected files.
* To cancel a selection, press the Yellow button again.
* To deselect all selected files, press the TOOLS button, select
Deselect All, and then the ENTER _4_ button.
3. Press the TOOLS button, select Play Selected Contents, and
then press the ENTER _ button.
[] Playing a video/music/photo folder
1. With the folders on your USB device displayed, use the
_i/_-/A/_' buttons to highlight a folder.
2. Press the TOOLS button, select Play Folder, and then press the
ENTER _ button.
-10-
There is no picture/video. Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
Set your external device's (Cable/Sat Box, DVD, BIu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.
Make sure your connected devices are powered on.
Be sure to select the correct input source by pressing the SOURCE button on the remote control.
Reboot the connected device by reconnecting the device's power cable.
RF (Cable/Antenna) Connection
The TV is not receMng all channels. Make sure the coaxial cable is connected securely.
Run Auto Program to add available channels to the channel list.
go to _,4ENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set
in the menu. There are 3 options. (STD, HRC and IRC)
Verify the antenna is positioned correctly.
No Caption on digital channels. Check the Caption Setup menu. Try changing Caption Mode Service f to CCf.
Some channels may not have caption data.
The picture is distorted: macroblock, Compression of video contents may cause picture distortion, especially on fast moving pictures such as those in
error, small block, dots, pixelization, sports and action movies.
A weak signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal bars and Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-
buzzing noise from the TV speakers with top-box has a grounding issue. Replace the Component video cables with an HDMI connection.
Component cable connection.
The picture will not display in fullscreen. HD channels will have black bars on eitherside of the screen when displaying up scaled SD (4:3) contents.
Black bars on the top and bottom appear when movies that have aspect ratios different from your TV play on the
TV.
Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work. Replace the remote control's batteries. Make sure you insert them with the polarity (+/-) correct.
Clean the transmission window located on the top of the remote control.
Try pointing the remote directly at the TV from 5.-6 feet away.
The cable/set top box remote control Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
does not turn the TV on or off, or adjust the SAMSUNG TV code.
the volume.
A "Mode Not Supported" message Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to
appears, resolution settings in this manual.
Caption on the TV menu is greyed out. You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
Caption must be activated on the external device.
There isa plastic smell from the TV. This smell is normal and will dissipate in afew days.
TV Signal Strength is unavailable inthe This function is only available for digital channels received through an Antenna /RF/Coax connection.
Self Diagnosis Test menu.
TV istilted to the right or left side. Remove the stand base from the TV and reassemble it.
The Channel menu is grey out The Channel menu is only available when you select the TV source.
(unavailable).
Your settings are lost after 30 minutes or IfTV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
every time the TV is turned off. Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select
TV mode, go to MENU _ Setup _ Plug & Play _ ENTER C_.
You have intermittent loss of audio or Check the cable connections and reconnect them.
video. Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible
enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
You see small particles when you look This is part of the product's design and is not a defect.
closely at the edge of the frame of
the TV.
POP (TV's internal banner ad) appears Select Home Uee under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).
on the screen.
'_' This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may
be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
'_' Watch these troubleshooting on video at www.samsung.com/spsn.
'_' Some functions and pictures shown in this manual are available on specific models only.
'_' Typical power consumption is measured according to Energy Star Program requirements for Televisions.
'_' You can keep your TV in optimum condition by upgrading it with the latest firmware from the Samsung web site (samsung.com
Support _ Downloads). To upgrade, download the firmware to your computer, copy the firmware file to a USB memory stick,
insert the USB memory stick into the TV's USB slot, and then select Support > Software Upgrade in the TV's menu.
-14-
Media Play - Additional Functions
[] Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
Title
Repeat Mode
Picture Size
Picture Mode
Auto Motion
Plus
Sound Mode
Subtitle
Setting
Audio Format
Audio
Language
Stop Slide
Show /
Start Slide
Show
Slide Show
Speed
Background
Music
Zoom
Rotate
_nformation
You can select another video file
to play directly. ,7
You can play movie and music
files repeatedly. ,7 ,7
You can adjust the picture size to
your preference. ,7
You can adjust the picture setting. ,7
You can enhance motion in fast
moving scenes. ,7
You can adjust the sound setting. ,7 ,7
You can play the video with
Subtitles. This function only works
if the subtitles have the same file ,7
name as the video.
You can select the digital audio
output format. ,7
You can change the audio
language if the video has more ,7
than one language.
You can start or stop a Slide
Show.
You can select the slide show
speed during the slide show.
You can set and select
background music when
watching a Slide Show.
You can zoom into images in full
screen mode.
You can rotate images in full
screen mode.
You can see detailed information
about the played file. ,7 ,7
,7
,7
,7
,7
,7
,7
,7
,7
Using the Setup Menu
[] DivX@ Video On Demand : Shows the registration code
authorized for the TV. If you connect to the DNX web site and
register with the lO-digit registration code, you can download
the VOD activation file. Once you play it using Media Play, the
registration is completed.
'_' For more information on DivX@ VOD, visit "http://vod.divx.
corn".
[] Information: Select to vies! information about the connected
USB device.
'_' NOTE
" Standard dimensions for wall mount kits are shown in the table
below.
* When purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
* Do not use screws that do not comply with the VESA standard
screw specifications.
* Do not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
* For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
* Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
* Samsung is not liable for product damage or personal injury
when a nomVESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
* Do not mount the TV at more than a 15degree tilt.
* Always have two people mount the TV on a wall.
LED-TV
19_22
26
32._40
46_ 60 l 75 X 75 M4
100 X 100
200 X 200 M6
400 X 400 M8
Do not install your Wall Mount Kit while
//_ TV is turned It result in
your on, may
personal injury due to electric shock.
Securing the "IV to the Wall
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added ,stability, instal!
the anti-fall device for safety purposes, as follows.
To prevent the IV from falling
=_ Since ttqenecessary brackets, screws, and string or cable are
not supplied, please purchase these separately.
1. Insert the screws intothe wall brackets and firmly fasten them to
ttqewall. Make sure the screws are firmly fixed to ttqewall.
We strongly recommend you drive ttqe screws into a stud.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
For detailed information about installing the wall mount, see
the instructions provided with the wall mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the wall
mount on your own.
Wail Mount Kit Specifications (VESA)
'_' The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
2. Using screws, insert the screws through the TV brackets, and
then fasten the screws to the top VESA screw holes on the back
of the TV.
3. Connect the brackets on the TV and the brackets on the wall
with a strong string or cable, and then tie the string or cable
tightly to the brackets.
_' Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a
professional installer.
'_ Install the TV close to the wall so that it does not fall.
'_' Connect the string or cable so that the brackets on the wall
are at the same height or lower than the brackets on the TV.
Untie the string or cable before moving the TV.
'_' To purcase a TV Holder kit, contact Samsung customer care.
nearest dealer. If you install the TV on a ceiling or slanted wall, it - 11-
may fall and result in severe personal injury.
Storage and Maintenance
'_' Ifa sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean it before watching
the TV.
'_' The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using
a soft cloth to prevent scratches.
Do not spray water directly onto the
product. Any liquid tha t goes into th e
produc t may cause a failure, fire, or
electric shock.
Clean the product with a soft cloth
dampened with in a small amount of
water. Do not use a flammable liquid
(e.g. benzene, thinners)or a cleaning
agent.
License
rM
TheaterSound, SRS and the _ symbol are i SRS TbeaterSound provides the most immersive
SrS_ trademarks of SRS Labs, h_c. i surround sound experience from the l_/'s built-in
TheaterSo_nd TheaterSound technology is incorporated under i speakers, while maintaining steady volume and delivering
licence from SRS Labs, hqc. i rich bass and clear dialog.
_| _- DNX Certified@ to play DNX@ video up to HD 1080p, including premium content.
HD
ABOUT DIVX VIDEO: DNX@ isa digital video format created by DNX, LLC, a subsidiary of Rovi Corporation. This is an official DNX
Certified@ device that plays DNX video. Visit dNx. corn for more information and software tools to convert your files into DNX videos.
ABOUT DIVX VIDEO_ON_DEMAND: This DNX Certified@ device must be registered in order to play purchased DNXVideo_om
Demand (VOD) movies. To obtain your registration code, locate the DNXVOD section inyour device setup menu. Go to vod. dNx.
corn for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274 DivX@,DNXCertified@ and associated Iogos are trademarks of Rovi Corporation or its subsidiaries
and are used under license.
[_ DOLB¥
DIGITAL PLUS I
PULSE I
Manufactured under license from Dolby Laboratories. Dolby and ttqedouble_D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS, ttqe Symbol, & DTS and the Symbol together are registered trademarks
2.0+Diaital Out & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. @ DTS, Inc. All Rights Reserved.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensoume.samsung.com) Open Source License
Notice is written only English.
To send inquiries and requests for questions regarding open sources, contact Samsung via Email ([email protected]).
I_ This product uses some eoftware programs which are distributed under the Independent JPEG Group.
ICU License -ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1995-2008 International Business Machines eorperation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this sofb_vareand associated documentation files (the "Software"), to dealin the Software
without restriction, including witheut limitation the rights to use, copy, modify, merge, publish, distribute, and/or sellcopies of the Seftware, and to permit persons to
whom the Software isfurnished to do se, provided that the above copyright netice(s)and this permissien notice appear in allcopies of the Software and that both the
above cepyright notice(s) and this permission netice appear in supperting documentation.
THE SOFTWAREIS PROVIDED "AS IS",WITHOUT WARRANTY OFANY KIND, EXPRESSOR IMPLIED, INCLUDING BUT NOT LIMITEDTOTHE WARRANTIES
OF MERCHANTABUT_, FITNESSFOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR HOLDERS INCLUDED INTHIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATAOR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
ACTION, ARISING OUT OFOR IN CONNECTIONWITH THE USE OR PERFORMANCE OFTHISSOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization ef the cepyright holder.
All trademarks and registered trademarks mentioned herein are the property of their respective owners.
Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for additional
information on proper use. IBM
_' Please find a "i_" icon on the rear of the TV. The Kensington
slot is beside the "i_" icon. MAC
The position and color may differ depending on ttqe model.
Assembling the Wire Holder stand
VESA DMT
Display Modes (HDMI/DVl Input)
Optimal resolution is 1920 x 1080@60Hz.
640 x 350 31 469 70086 25175
720 x 400 31 469 70087 28322
640 x 480 35000 66667 30240 /
832 x 624 49726 74551 57284
1152 x 870 68681 75062 100000
640 x 480 31 469 59940 25175 /
640 x 480 37861 72809 81500 /
640 x 480 37500 75000 31500 /
800 x 600 37879 60317 40000 +/+
800 x 600 48 077 72 188 50000
800 x 600 46875 75000 49500
1024 x 768 48363 60004 65000 /
1024 x 768 56476 70069 75000
1024 x 768 60023 75029 78750
1152 x 864 67500 75000 108000 +/+
1280 x 720 45000 60000 74250 +/+
1280 x 800 49702 59810 83500 /+
1280 x 1024 63 981 60020 108000
1280 x 1024 79 976 75025 135000
1366 x 768 47712 59790 85500 +/+
1440 x 900 55935 59887 106500 /+
1600x 900RB 60000 60000 108000 +/+
1680 x 1050 65 290 59954 146250
1920 x 1080 67 500 60000 148500
Troubleshooting
If the TV seems to have a problem, first review this list of possible )roblems and solution. If none of these troubleshooting tips apply, visit
samsung.com, ttqen click on Support, or call Samsung customer service at 1_800_SAMSUNG.
Flickering and Dimming Ifyour Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient
features like the Eco Sensor or the Energy Saving feature. Follow the steps below with your remote to turn these
features off or on.
_, Energy saving :Menu _ Setup _ Eco Solution _ Energy Saving _Select Settings
_, Eco Sensor : Menu _ Setup _ Eco Solution _ Eco Sensor _Select Settings
Component Connections /If you find that the color on your Samsung television's screen is not correct or black and white, first run a Self
Screen Color Diagnosis Test on the TV to make sure there are no device issues.
_,Self Diagnosis : User Menu _ Support _ Self Diagnosis _ Picture Test
_, Ifthe test is ok, try making sure ;
_, Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
_,Try making sure you have connected to the correct jacks. For example, ifyou use the Component jacks, labeled
Pb, Pr,and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the
video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
/ou should check before calling for a repair.
_, Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go to "Picture" in the Menu, and then try
adjusting these options.
Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure the Sleep Timer is not accidentally set. The Sleep Timer lets you fall asleep with the TV still on
knowing that it will turn off after a certain period of time and not waste energy.
_,Sleep Timer :User Menu _ Setup _ Time _ Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Offfeature.
_, No Signal Power Off : User Menu _ Setup _ Eco Solution _ No Signal Power
_,Auto Power Off : User Menu _ Setup _ Eco Solution _ Auto Power Off
-12-
Environmental I
Considerations I
Operating Temperature
Operating Humidity I
Storage Temperature
Storage Humidity
50°F to 104°F (t 0°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
Display Resolution 1920x 1080
46" Class 55" Class
_5.9" measured diagonally) (54.6" measured diagonally)
40" Class 60" Class
(Diagonal) (40.0" measured diagonally) (60.0" measured diagonally)
Sound
Output 10W x 2
Dimensions (W X D x H) 38.2 X 3.6 X 21.8 inches 41.7 X 3.7 X 24.7 inches 49.2 X 3.7 X 28.9 inches 54.0 X 3.7 X 31.7 inches
(927.6 X 93.3 X 555.5 (ram)) (1059.8 X 94.3 X 629.4 (ram)) (1250.6 X 94.3 X 735.7 (ram)) (1374.1 X 94.3 X 807.0 (mm))
With stand 38.2 X 8.9 X 23.8 inches 41.7 X 8.9 X 26.7 inches 49.2 X 8.9 X 31.0 inches 54.0 X 12.9 X 33.8 inches
(927.6X227.6X606.5(mm)) (1059.8X227.6X680.3(mm)) (1250.6X227.6X789.2(mm)) (1374.1X329.8X859.0(mm))
Without Stand 20.2 Ibs (9.2 kg) 26.4 Ibs (12.0 kg) 45.6 Ibs (20.7 kg) 54.6 Ibs (24.8 kg)
With Stand 24.6 Ibs (11.2 kg) 30.8 Ibs (14.0 kg) 51.3 Ibs (23.3 kg) 60.4 Ibs (27.4 kg)
,L, Design and specifications are subject to change without prior notice.
,L, This device is a Class B digital apparatus.
,L, For information about power supply, and more about power consumption, refer to the label attached to the
product.
,L, Typical power consumption is measured according to Energy Star Program requirements for Televisions.
,L, Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our
website: www.samsung.com/recyclingdirect or call, [phone].
[] JACK PANEL DETAIL /REAR VIEW
(Unit: inches)
UN40EH6000 /UN40EH6050 9.6 5.8 5.8 24.1 7.8 7.8
UN46EH6000 /UN46EH6050 11.6 5.2 7.3 29.8 15.7 15.7
UN55EH6000 /UN55EH6050 15.5 6.1 7.6 36.4 15.7 15.7
UN60EH6000 /UN60EH6050 16.7 8.6 8.8 38.5 15.7 15.7
NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions
prior to performing installation of your TV. Not responsible for typographical or printed errors.
@ 2012 Samsung Electronics America, Inc
-13- -15- -16-