Samsung UA55F9000AR User manual

LED TV
SERVICEManual
LED TV Contents
1. Precautions
2. Product specications
3. Disassembly and Reassembly
4. Troubleshooting
5. Wiring Diagram
UA**F9000AR
Chassis : U91A
Model : UA55F9000AR
UA65F9000AR

Contents
1. Precautions...................................................................................................................1-1
1-1. Safety Precautions ..............................................................................................................1-1
1-1-1. Warnings...................................................................................................................1-1
1-1-2. Servicing the LED TV ...............................................................................................1-1
1-1-3. Fire and Shock Hazard.............................................................................................1-1
1-1-4. Product Safety Notices .............................................................................................1-2
1-2. Servicing Precautions..........................................................................................................1-3
1-2-1. General Servicing Precautions .................................................................................1-3
1-3. Static Electricity Precautions ...............................................................................................1-4
1-4. Installation Precautions .......................................................................................................1-5
2. Product Specications.................................................................................................2-1
2-1. Product information .............................................................................................................2-1
2-2. Product specication ...........................................................................................................2-2
2-2-1. Detailed Specications .............................................................................................2-2
2-2-2. Feature & Specications...........................................................................................2-6
2-3. Accessories ........................................................................................................................2-9
2-4. Viewing the Functions ......................................................................................................2-10
2-4-1. SMART Interaction .................................................................................................2-10
2-4-2. Smart Touch Control ...............................................................................................2-12
2-4-3. SMART HUB...........................................................................................................2-15
2-4-4. Supported Formats.................................................................................................2-17
2-4-5. 3D Active Glasses ..................................................................................................2-20
3. Disassembly and Reassembly ....................................................................................3-1
3-1. Disassembly and Reassembly ............................................................................................3-1
3-1-1. TV .............................................................................................................................3-1
4. Troubleshooting ...........................................................................................................4-1
4-1. Troubleshooting...................................................................................................................4-1
4-1-1. Previous Check ........................................................................................................4-1
4-1-2. Simple ow chart of malfunction...............................................................................4-3
4-2. How to Check Fault Symptom.............................................................................................4-4
4-2-1. NO Power and No Video ..........................................................................................4-4
4-2-3. Video trouble shooting..............................................................................................4-6
4-2-4. Problems and Solutions............................................................................................4-7
4-3. Factory Mode Adjustments..................................................................................................4-9
4-3-1. Detail Factory Option................................................................................................4-9
4-3-2. Entering Factory Mode ...........................................................................................4-10
4-3-3. Factory Data ........................................................................................................... 4-11
4-4. White Balance ...................................................................................................................4-24
4-4-1. Calibration ..............................................................................................................4-24
4-4-2. Service Adjustment.................................................................................................4-24
4-4-3. Adjustment..............................................................................................................4-26

4-5. RS-232C............................................................................................................................4-27
4-6. AV Control Tabe.................................................................................................................4-28
4-7. Software Upgrade..............................................................................................................4-34
4-7-1. How to Check the Software Version .......................................................................4-34
4-7-2. How to Upgade Software........................................................................................4-35
5. Wiring Diagram.............................................................................................................5-1
5-1. Wiring Diagram....................................................................................................................5-1
5-2. Connector............................................................................................................................5-2
5-2-1. Main Board ...............................................................................................................5-2
5-2-2. Jack Pin Board .........................................................................................................5-5
5-3. Connector Functions ...........................................................................................................5-7

This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law.
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved.
Printed in Korea

Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as
electrical shock.
1-1-1. Warnings
WARNING
For continued safety, do not attempt to modify the circuit board.
Disconnect the AC power and DC power jack before servicing.
1-1-2. Servicing the LED TV
When servicing the LED TV, Disconnect the AC line cord from the AC outlet.1.
It is essential that service technicians have an accurate voltage meter available at all times. Check the calibration of this2.
meter periodically.
1-1-3. Fire and Shock Hazard
Before returning the monitor to the user, perform the following safety checks:
Inspect each lead dress to make certain that the leads are not pinched or that hardware is not lodged between the1.
chassis and other metal parts in the monitor.
Inspect all protective devices such as nonmetallic control knobs, insulating materials, cabinet backs, adjustment and2.
compartment covers or shields, isolation resistorcapacitor networks, mechanical insulators, etc.
Leakage Current Hot Check:3.
DEVICE
UNDER
TEST
(READING SHOULD)
NOT BE ABOVE 0.5mA LEAKAGE
CURRENT
TESTER
TEST ALL
EXPOSED METAL
SURFACES
2-WIRE CORD
ALSO TEST WITH
PLUG REVERSED
(USING AC ADAPTER
PLUG AS REQUIRED)
EARTH
GROUND
WARNING
Do not use an isolation transformer during this test.
Use a leakage current tester or a metering system that complies with American National Standards
Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL
Publication UL1410, 59.7).
With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch rst 4.
in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, conduit, etc.)
and all exposed metal parts, including: metal cabinets, screwheads and control shafts.
The current measured should not exceed 0.5 milliamp.
Reverse the power-plug prongs in the AC outlet and repeat the test.
1-1
1. Precautions
1. Precautions
1-1. Safety Precautions

1-2
1. Precautions
1-1-4. Product Safety Notices
Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual
inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage,
wattage, etc. Parts that have special safety characteristics are identied by on schematics and parts lists. A substitute
replacement that does not have the same safety characteristics as the recommended replacement part might create
shock, re and/or other hazards. Product safety is under review continuously and new instructions are issued whenever
appropriate.

WARNING
An electrolytic capacitor installed with the wrong polarity might explode.
CAUTION
Before servicing units covered by this service manual, read and follow the Safety Precautions section of
this manual.
NOTE
If unforeseen circumstances create conict between the following servicing precautions and any of the
safety precautions, always follow the safety precautions.
1-2-1. General Servicing Precautions
Always unplug the unit’s AC power cord from the AC power source and disconnect the DC Power Jack before1.
attempting to: (a) remove or reinstall any component or assembly, (b) disconnect PCB plugs or connectors, (c) connect
a test component in parallel with an electrolytic capacitor.
Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes used.2.
The internal wiring is sometimes clamped to prevent contact with thermally hot components. Reinstall all such elements
to their original position.
After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that3.
the area around the serviced part has not been damaged.
Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input4.
terminals and earphone jacks).
Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. Connect5.
an insulation resistance meter (500 V) to theblades of the AC plug. The insulation resistance between each blade of the
AC plug and accessible conductive parts (see above) should be greater than 1 megohm.
Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead;6.
always remove the instrument’s ground lead last.
1-3
1. Precautions
1-2. Servicing Precautions

Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly
called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some eld-effect
transistors. The following techniques will reduce the incidence of component damage caused by static electricity.
Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your1.
body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. To avoid a shock hazard,
be sure to remove the wrist strap before applying power to the monitor.
After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent2.
accumulation of an electrostatic charge.
Do not use freon-propelled chemicals. These can generate electrical charges sufcient to damage ESDs.3.
Use only a grounded-tip soldering iron to solder or desolder ESDs.4.
Use only an anti-static solder removal device. Some solder removal devices not classied as “anti-static” can generate 5.
electrical charges sufcient to damage ESDs.
Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs6.
are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive
materials.
Immediately before removing the protective material from the leads of a replacement ESD, touch the protective material7.
to the chassis or circuit assembly into which the device will be installed.
CAUTION
Be sure no power is applied to the chassis or circuit and observe all other safety precautions.
Minimize body motions when handling unpackaged replacement ESDs. Motions such as brushing clothes together, or8.
lifting your foot from a carpeted oor can generate enough static electricity to damage an ESD.
1-4
1. Precautions
1-3. Static Electricity Precautions

For safety reasons, more than a people are required for carrying the product.1.
Keep the power cord away from any heat emitting devices, as a melted covering may cause re or electric shock.2.
Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature3.
may cause re.
Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed4.
to moisture. Otherwise, it may cause a re or electric shock.
Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check5.
the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause re or electric
shock.
Keep the antenna far away from any high-voltage cables and install it rmly. Contact with the highvoltage cable or the 6.
antenna falling over may cause re or electric shock.
When installing the product, leave enough space (0.4m) between the product and the wall for ventilation purposes.7.
A rise in temperature within the product may cause re.
1-5
1. Precautions
1-4. Installation Precautions

2-1
2. Product specications
2. Product Specications
2-1. Product information
Model UA**F9000AR
Front View
W
D
* W : Width H : High D : Depth
H
Detail View
Front Color Front Color : Black / Stand Color : Chrome Silver
Dimensions
(W x H x D)
55" Set with Stand 124.5 x 75.6 x 31 cm
Set without Stand 124.5 x 71.7 x 3.8 cm
65" Set with Stand 146.2 x 87.4 x 33 cm
Set without Stand 146.2 x 83.7 x 4 cm
Weight
55" Set with Stand 23.6 kg
Set without Stand 22.2 kg
65" Set with Stand 34.2 kg
Set without Stand 32.1 kg
Panel Type SVA (Super Vertical Align)
Internal Memory Flash 4G
DDR 2048Mbyte
Feature 3D, MoIP, Media Bridge, Allshare, Internet TV, Built-in WiFi, Full Browser, Bluetooth

2-2
2. Product specications
2-2. Product specication
2-2-1. Detailed Specications
NOTE
Design and specications are subject to change without prior notice.
Item UA**F9000ARMXL
General Information Product LED
Series 6
Country INDIA
Display Inch 55" / 65"
Resolution 3,840 x 2,160
Ultra Clear Panel Yes
Video Clear Motion Rate TBD
Micro Dimming Micro Dimming Ultimate
Precision Black (Local Dimming) TBD
Picture Engine 3D HyperReal Engine
Dynamic Contrast Ratio Mega Contrast
Motion Judder Canceller N/A
Wide Color Enhancer (Plus) Yes
Auto Motion Plus 120/240Hz N/A
Film Mode Yes
Natural Mode Support Yes
Audio 3D Sound Yes
Sound Output (RMS) 70W(15Wx2+20Wx2)
Dolby Dolby Digital Plus / Dolby Pulse
SRS / DNSe+ DNSe+
dts 2.0 + Digital Out / DTS Premium Audio DTS Premium Audio 5.1
Speaker Type Down Firing + Full Range
Sound Customizer Yes
Woofer Yes
Smart TV 2.0 Smart Hub Yes
On TV N/A
Movies & TV Shows N/A
Apps Yes
Social Yes
Photos, Videos & Music N/A
Family Story No
Fitness Yes

2-3
2. Product specications
Item UA**F9000ARMXL
Smart TV 2.0 Kids Yes
ACR (Advertisement) N/A
Samsung Sports Experience (SSE) N/A
Samsung SMART View Yes
Intelligent Viewing N/A
Smart Appliance N/A
S Recommendation N/A
Prism Screen N/A
Web Browser Yes
Smart Interaction 2.0 Camera Built-in Yes
Face recognition Yes
Motion control N/A
Voice Control (Embedded) N/A
Voice Control (Server) N/A
Voice Interaction N/A
Camera App Yes
Samsung TV Apps supported Yes
System DTV Tuner READY
Analog Tuner Yes
MHP / MHEG (version)/ ACAP / GINGA N/A
Input & Output Audio Out (Mini Jack) 1
Component In (Y/Pb/Pr) 1
Composite In (AV) N/A
Digital Audio Out (Optical) 1
DVI Audio In (Mini Jack) No
Ethernet (LAN) 1
HDMI 4
PC Audio In (Mini Jack) No
PC In (D-sub) No
RF In (Terrestrial/Cable Input) 1
RF In (Satellite Input) No
RS-232C (AV CONTROL) N/A
USB 3
Headphone No
IR Out Yes
Design Design Metal
Slim Type -
Bezel Type Ultra Slim (0.5" thin)

2-4
2. Product specications
Item UA**F9000ARMXL
Design Front Color BLACK
Light Effect (Deco) Yes
Swivel (Left/Right) No
Stand Type ARCH
Push & Pull Camera Yes
Feature 3D Converter Yes
ConnectShare™ (USB 2.0) N/A
Samsung 3D Yes
History Yes
MultiTasking Yes
Smart Evolution Support Yes
Wireless LAN Built-in Yes
Wireless LAN Adapter Support No
OSD Language Local Languages
EPG Yes
HDMI 1.4 3D Auto Setting Yes
HDMI 1.4 A/Return Ch. Support N/A
Time Shift Yes
AllShare (Content Sharing, Screen
Mirroring) N/A
Teletext (TTXT) N/A
User Interface Golden bridge
InstaPort S (HDMI quick switch) Yes
Anynet+ (HDMI-CEC) Yes
Auto Channel Search Yes
Auto Power Off Yes
Auto Volume Leveler Yes
Caption (Subtitle) Yes
Clock&On/Off Timer N/A
Game Mode Yes
Sports Mode Yes
Kids Lock N/A
Picture-In-Picture N/A
Sleep Timer Yes
Extended PVR Yes
Smart Phone Remote support Yes
WiFi Direct Yes
ISP Bound Service N/A
BT HID Built-in Yes

2-5
2. Product specications
Item UA**F9000ARMXL
Feature USB HID Support Yes
Network Speaker Support No
Sound Share Yes
Regional EQ N/A
Digital Clean View N/A
Analog Clean View N/A
MHL Yes
Miracast No
Twin Tuner N/A
BD Wise Plus Yes
USB Copy N/A
ACS N/A
IP Video Closed Caption N/A
Embeded POP No
Accessory 3D Active Glasses (Included) 4 (SSG-5100GB)
IR Extender Cable (Included) N/A
Wireless LAN Adaptor (Included) N/A
Network Speaker (Included) No
MoIP Camera N/A
Wireless Keyboard N/A
Remote Controller Model TM1390A
Batteries (for Remote Control) N/A
Ultra Slim Wall Mount Supported N/A
Mini Wall Mount Supported N/A
Vesa Wall Mount Supported N/A
Slim Gender Cable 1AV, 1 Component(AV share), 1L/R
Power Cable Yes
ANT-Cable N/A
User Manual Yes
E-Manual Yes

2-6
2. Product specications
2-2-2. Feature & Specications
3D:• This new feature enables you to view 3D content.
SMART HUB:• This TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you
can surf the web, download applications, and stay in touch with family and friends through social networking services.
In addition, you can view or play photo, video, and music les stored on external storage devices.
Press the button to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.
Smart Hub services and functionality include:
Social-: Watch the latest YouTube videos and your and your friends' video posts on Facebook and Twitter. You can
also make video calls to friends by the TV camera.
Apps:- Samsung Apps offers an extensive collection of free and paid news, sports, weather, and gaming content
you can directly download to and enjoy on your TV.
On TV:- Check a listing of programs that are currently airing or are scheduled to air.
Movies & TV Shows:- Purchase and watch movies and series without a separate external device.
Photos, Videos & Music:- Play back photo, video, and music les from an external storage device.
Anynet+ (HDMI-CEC):• This allows you to control all connected Samsung devices that support Anynet+ with your
Samsung TV’s remote.
e-Manual:• Provides a detailed, on-screen user's manual built into your TV.
SMART Interaction:• Using this function, you can access and control menu options and functions using motions.
Device Manager:• Use the TV features with a USB or Bluetooth keyboard and mouse.
MHL & Screen Mirroring:• Displays mobile device screens on your TV using a wired or wireless connection.

2-7
2. Product specications
Model UA55F9000AR
Item Description
LCD Panel 55 inch UHD 120Hz
Scanning Frequency Horizontal : 270KHz (TYP)
Vertical : 120Hz (TYP)
Display Colors 16.7M (True Display)
1.07B (Dithered 10bit)
Maximum Resolution Horizontal : 3,840 Pixels
Vertical : 2,160 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 76.5MHz x 4 (Typ 74.25MHz x 4)
Active Display (H x V)*
* Horizontal x Vertical
47.7 (H) x 26.8 (V) inches / 1211.6 (H) x 682.4 (V) mm
AC Power Voltage & Frequency AC100-240V 50/60Hz
Power Consumption 255W (Under 0.1 W, Stand by)
Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing
Storage Temperature : -4˚F ~ 113˚F (-20˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing
Audio Specications MAX Internal Audio Output Power : 70W•
Woofer : 20W x 2-
Tweeter : 15W x 2-
Equalizer : 5 Brand•
RF : 20Hz ~ 15.4kHz•
AV/Component/HDMI : 20Hz ~ 20kHz•
Note : 3D, MoIP, Media Bridge, Allshare, Internet TV, Built-in Wi-Fi, Full Browser, Bluetooth

2-8
2. Product specications
Model UA65F9000AR
Item Description
LCD Panel 65 inch UHD 120Hz
Scanning Frequency Horizontal : 270KHz (TYP)
Vertical : 120Hz (TYP)
Display Colors 16.7M (True Display)
1.07B (Dithered 10bit)
Maximum Resolution Horizontal : 3,840 Pixels
Vertical : 2,160 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 76.5MHz x 4 (Typ 74.25MHz x 4)
Active Display (H x V)*
* Horizontal x Vertical
56.3 (H) x 31.7 (V) inches / 1430.4 (H) x 805.4 (V) mm
AC Power Voltage & Frequency AC100-240V 50/60Hz
Power Consumption 283W (Under 0.1 W, Stand by)
Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing
Storage Temperature : -4˚F ~ 113˚F (-20˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing
Audio Specications MAX Internal Audio Output Power : 70W•
Woofer : 20W x 2-
Tweeter : 15W x 2-
Equalizer : 5 Brand•
RF : 20Hz ~ 15.4kHz•
AV/Component/HDMI : 20Hz ~ 20kHz•
Note : 3D, MoIP, Media Bridge, Allshare, Internet TV, Built-in Wi-Fi, Full Browser, Bluetooth

2-9
2. Product specications
2-3. Accessories
NOTE
The items’ colors and shapes may vary depending on the model.•
Check that there is no accessory hidden behind packing materials when you open the box.•
The part code for some accessories may differ depending on your region.•
Product Code. No Product Code. No
Smart Touch Control• AA59-00762A Regulatory Guide• BN68-04972C
Batteries (AAA x 2)• 4301-000103 User Manual• BN68-05459A
Power Cord• 3903-000541 Warranty Card• -
Samsung 3D Active Glasses• BN96-27418A
Image Product Code. No
AV Adapter• BN39-01154H
Component adapter• BN39-01154C
IR Extender Cable• BN96-26652A
Cable manager• BN61-08951A
One Connect• BN94-06653C
One Connect Cable• BN39-01815B

2-10
2. Product specications
2-4. Viewing the Functions
2-4-1. SMART Interaction
Voice Recognition
Conversation with TV by Human Talks.-
TV answer or execute about User’s Talks.-
Start to use Voice Recognition
Voice Recognition Voice Recognition On Voice Recognition Tutorial
Example of Broadcasting & Contents
Search Program title (on air)• "What’s the title?"
Recommend/Search Program (Channel)• "Something interesting program?"
Search the specic Genre of contents• "Which channel is on NEWS?"
Search the specic Program title• "Find "American Idols"
Search the program by performer• "Find channel which Oprah Winfrey appear"
Change Channel by calling the channel• "FOX, USA Network, CWTY, NBC, …"
NOTE
Support Genre•
DRAMA MOVIE CARTOON ENTERTAINMENT
SPORTS HOBBY MUSIC EDUCATION
SHOPPING NEWS CURRENT EVENTS CULTURE

2-11
2. Product specications
Motion Recognition
One-Hand Motion Control•
Slightly shake the hand forward to TV
Degree : front/left/right 45 degree
Two-Hand Motion Control•
[Case 1] Recognize one hand [Case 2] Recognize two hands
Slightly shake the hand forward to TV Slightly shake two hands forward to TV
Motion Recognition
Pointing Mode Command Set•
Special Command Set ('13 New Functions)•
Slap : Move SMART HUB Window, Photo Two-Handed : Zoom In/Out
Slap : Move SMART HUB Window, Photo
Rotation : Rotating Photo
Same as “Return” key on remote.
Slap : Free Pointing Grab : Execute
Grab & Move : Panning CCW Rotation : Back