Samsung 460DX - SyncMaster - 46" LCD Flat Panel... Installation guide

SyncM aster 460DX (LH46BPP)
SyncM aster 520DX (LH52BPP)
Training M anual
Training M anual
SAMSUNG ELECTRONICS CO.,LTD
Visual Display Division
LCD Monitor Group

Index
Index
Overview
Introduction
Block Di gr m
M in Bo rd P rt
Service Mode P rt
Troubleshooting
DDC Entry
Wh t To Do fter Bo rd Repl cement

Overview
Overview
1. Background of Development
▶To expand the large LCD product market (Public facilities like Airport, Theater, etc.)
▶ To enhance image uality, and additional functions
comparing with the existing model
▶ To provide more convenience for user
▶ To achieve competitive power by improving optional network function

Overview
Overview
2. Product Features
▶VMB (Vertical Marketing Business) Model
▶MFM (Multi Function Monitor) :
Receives diverse support other than PC (DVI, HDMI, AV, S-video, Component)
▶Response Time 8ms SPVA adopted
▶Sound function reinforced by adopting SRS Trusurround
▶ RS232 Remote Control (MDC software provided)
▶Video input: PC(D_SUB,DVI), BNC, DVI, HDMI, Component, AV, S-Video
▶Audio input: PC(D_SUB,DVI) Stereo, Video(AV, S-Video), Component, BNC, HDMI
▶Image & sound output: PC, BNC, AV, S-Video, Component out, speaker out
▶10W x 2 speaker
▶PIP automatic switch timer function: PIP automatically pops-up when setting time
▶PIP, OSD menu transparency control
▶Sleep timer (automatic switch-off) function
▶Wall & Ceiling Mounting (Optional VESA Wall Mount Kit)

Overview
Overview
3. Specifications
LH40MST / LH46MST
Model Name SyncMaster 400UXn / 460UXn
Panel AMLCD 46” ( LTI460AA01-V01 )
AMLCD 52” ( LTI520AA01-V01 )
Optimum Resolution 1366 x 768 (WXGA) 60Hz
Display Size 46” / 52” (16:9)
Bri htness 700cd/m2
Contrast Ratio 1200:1
Response Time 8 ms
Viewin An le Left/Right/Up/Down : 89/89/89/89
PC Input D-SUB, DVI
Video System AV, S-Video, Component
Supported Resolution
(Component) 1080I(50/60), 480I, 480P, 576I, 576P, 720P(50/60)
Power Consumption Less than 240 W(40”), 340 W(46”)
DPMS 1 W
Sound Output Max. 10W x 2

Introduction (Front)
Introduction (Front)
MENU :
Use this button to open the on-screen menu and exit from the menu screen or
close screen adjustment menu.
Up/Down button :
Moves from one menu item to another vertically or adjusts selected menu values.
Adjust / Volume button :
Moves from one menu item to another horizontally or adjusts selected menu values.
Also adjusts the audio volume.
ENTER : Activates a highlighted menu item.
SOURCE :
Changing the source is allowed only in external devices that are connected to the
monitor at the time. To switch Screen modes:
[PC] -> [BNC] -> [DVI] -> [AV] -> [S-Video] -> [Component] -> [HDMI] -> [MagicNet]
PIP :
Push the PIP button to turn PIP screen On/Off.
More than one PIP couldn't be overlapped on screen as BNC and the component use
the same terminal.
• PC / DVI : AV / S-Video / Component Mode
• BNC: AV / S-Video Mode
• AV / S-Video : PC / BNC / DVI Mode
• Component: PC / DVI Mode
POWER : Use this button to turn the monitor on and off.
LED : Power Indicator shows Power Saving mode by green blinking.
Remote Control Sensor : Aim the remote control towards this spot on the
Monitor.
Viewin the Control Panel
1. MENU 5. SOURCE
2. Navi ate button (Up-Down button) 6. PIP
3. Adjust button (Left-Ri ht button) 7. Power button
Volume button 8. Power indicator
4. ENTER 9. Remote Control Sensor

Introduction (Rear)
Introduction (Rear)
Rear
1. POWER S/W
2. POWER IN
Connection Terminal
ON
OFF

Introduction (Rear)
Introduction (Rear)
Connection Terminal
Rear
3. REMOTE OUT/IN (Remote Control Port)
4. RS232C OUT/IN (RS232C Serial Port)
: MDC(Multiple Device Control) Program Port
5. PC/DVI/BNC AUDIO IN
(PC/DVI/BNC Audio Connection Terminal(Input))
6. HDMI IN(HDCP)
7. PC IN(RGB) (PC Video Connection Terminal)
: Using D-Sub (15 Pin) Cable - PC Mode (Analog PC)
8. DVI IN (PC Video Connection Terminal)
: Using DVI Cable (DVI-D to DVI-D) - DVI Mode (Digital PC)

Introduction (Rear)
Introduction (Rear)
Rear
9. COMPONENT AUDIO IN [L-AUDIO-R]
(Component Audio Connection Terminal (Input))
10. BNC/COMPONENT OUT
(BNC/Component Connection Terminal (Output))
- BNC (Analo PC) Connection :
connecting R, G, B, H, V port
- Component Connection :
connecting Pr, Y, Pb port
11. BNC/COMPONENT IN
(BNC/Component Connection Terminal (Input))
BNC COMPONENT
Connection Terminal

12. AV AUDIO IN [L-AUDIO-R]
(Monitor Audio Connection Terminal (Input))
13. AV OUT [VIDEO] (Video Connection Terminal)
: AV mode (Output)
14. AV IN [VIDEO] (Video Connection Terminal)
: AV mode (Input)
15. AV OUT [S-Video] (S-Video Connection Terminal)
: S-Video mode (Output)
16. AV IN [S-Video] (S-Video Connection Terminal)
: S-Video mode (Input)
17. EXT SPEAKER(8 Ω) (EXT Speaker Connection Terminal)
18. AUDIO OUT [L-AUDIO-R]
(Monitor Audio Connection Terminal (Output))
: MONITOR OUT is the terminal for sound output of PC, DVI or BNC
Introduction (Rear)
Introduction (Rear)
Rear
Connection Terminal

Introduction (Rear)
Introduction (Rear)
Rear
19. LAN(LAN Connection Terminal)
MS Internet Explorer
20. USB (USB Connection Terminal)
Keyboard, Mouse, Mass Storage Device Compatible
Connection Terminal

Introduction (Rear)
Introduction (Rear)
Rear
21. Kensin ton Lock
The Kensington lock is a device used to physically
fix the system when using it in a public place.
Connection Terminal

Introduction (Remote Controller)
Introduction (Remote Controller)
ON/OFF Turns the LCD display On/Off.
Ma icNet MagicNet Quick Launch Button.
MDC MDC Quick Launch Button.
LOCK Activates or deactivates all function keys on both remote control and the LCD
except for the Power and LOCK buttons.
Ma icNet buttons Used for MagicNet.
-. Alphanumeric : Used to enter the Internet address.
-. DEL : Function as the backspace.
-. SYMBOL : Used to enter the symbols. (., O. _, -, :, /)
-. ENTER : Used to enter values.
VOL Adjusts the audio volume.
MUTE Pauses (mutes) the audio output temporarily.
MENU Opens the OSD menu and exits from menu or closes the screen adjustment
menu.
ENTER Activates a highlighted menu item.
P. MODE Changes the available preconfigured picture mode.
AUTO Adjusts the screen display automatically in PC mode.
SOURCE Changes the video source.
INFO The current picture information is displayed in the top left corner of the screen.
EXIT Exits from the menu screen.
Up-Down Left-Ri ht buttons Moves from one menu item to another horizontally,
vertically or adjusts selected menu values.
S.MODE Changes the available preconfigured sound mode.
STILL Press the button once to freeze the screen. Press it again to unfreeze.
P.SIZE Press to change the screen size.
SRS SRS Trusurround XT

Unpacking
Unpacking
15pin D-sub cable BN39-00244B
Adaptor Connector 3705-001504
Accessories
BNC t RCA
Adapt er
Jack
15pin D-sub cable BN39-00244B
Adaptor Connector 3705-001504
BNC t RCA
Adapt er
Jack

Accessories(Sold Separately)
Unpacking
Unpacking
Spe ker wire

Protection of Image Retention
Protection of Image Retention
+ + + + + + + + +
- - - - - - - - -
-
--
+
++
+
+
-
-
---
+
++
Ima e retention may not occur when a
LCD panel is operated under normal
conditions.
Normal conditions are defined as
continuously chan in video patterns.
When the LCD panel is operated for a
lon time with a fixed pattern (over 12
hours), there may be sli ht difference in
volta e between electrodes that work the
liquid crystal (LC) in a pixel. The volta e
difference between electrodes increases
with time, forcin the liquid crystal to
lean. When this occurs,
the previous ima e may be seen when the
pattern is chan ed. To prevent this, the
accumulated volta e difference must be
decreased.

Safet Screen
Safet Screen
- Type 1. Screen Scroll : Screen is automatically scrolled
TIME
20:30
FLIGHT
OZ348
UA102 21:10


TIME
20:30
FLIGHT
OZ348
TIME
20:30
FLIGHT
OZ348
UA102 21:10
Interval : 1 ~ 10 hour (Recommend : 1)
Second : 1 ~ 5 second (Recommend : 5)
- Type 2. Pixel : One dot on/off and move
Interval : 1 ~ 10 hour (Recommend : 1)
Second : 10 ~ 50 second (Recommend : 50)
TIME
20:30
FLIGHT
OZ348
UA102 21:10
TIME
20:30
FLIGHT
OZ348
UA102 21:10

Safet Screen
Safet Screen
- Type 3. Bar : 2 bars move with crossin each other
Interval : 1 ~ 10 hour (Recommend : 1)
Second : 10 ~ 50 second (Recommend : 50)
TIME
20:30
FLIGHT
OZ348
UA102 21:10

TIME
20:30
FLIGHT
OZ348
UA102 21:10
TIME
20:30
FLIGHT
OZ348
UA102 21:10
Screen Protection
Screen Protection
- Type 4. Eraser : 2 blocks move with erasin the display
Interval : 1 ~ 10 hour (Recommend : 1)
Second : 10 ~ 50 second (Recommend : 50)
TIME
20:30
FLIGHT
OZ348
UA102 21:10
TIME
20:30
FLIGHT
OZ348
UA102 21:10
TIME
20:30
FLIGHT
OZ348
UA102 21:10

Connecting the Monitor
Connecting the Monitor
1. Connect the power cord for your monitor to the power port on the
back of the monitor. Turn on power switch.
2. There are 3 ways to connect the signal cable to your monitor.
Choose one of the followings :
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15 pin D-sub Port on the back of
your monitor.
2-2. Using the DVI (Digital) connector on the video card.
Connect the DVI Cable(DVI-D + DVI-D) to the DVI Port on the
back of your Monitor.
Connectin to a Computer
2-3. Using the BNC (Analog) connector on the video card.
Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B,
H, V port on the back of your Monitor and the 15 pin D-sub Port
on the computer.
3. Connect the audio cable for your monitor to the audio port on the
back of your computer.
4. Turn on both your computer and the monitor.

1. AV input devices like VCRs or Camcorders are connected to the AV IN
[VIDEO] or AV IN [S-VIDEO] of the monitor using the S-VHS or BNC cable.
2. Connect the Audio (L) and Audio (R) terminals of a VCR or Camcorders to
the monitor's AV IN [L-AUDIO-R] using audio cables.
3. Select AV or S-Video that is connected to a VCR or Camcorders using the
Source button on the monitor's front or remote control.
4. Then, start the VCR or Camcorders with a tape inserted.
Connectin to a VCR
Connecting the Monitor
Connecting the Monitor