Samsung 305T - SyncMaster - 30" LCD Monitor User manual

ii
LCD MONITOR
quick start guide
305TPLUS

Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local deale
r
to bu
y
o
p
tional items.
Unpacking
Manual
Quick Setup Guide
Warranty Card
(Not available in all
locations)
User's Guide
Cable

DVI-D
(
Dual link
)
Cable Power Cord
Sold se
p
aratel
y
USB Cable
(
A-B T
yp
e cable
)
Front
1. Brightness button []
Push the button to adjust brightness.
▼: The screen is getting dark.
▲: The screen is getting bright.
2. Power button []
/ Power indicator
Turns the monitor on/off.
/ The blue light is on in its normal working condition and blinks
when setting the adjustments of the monitor.
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor off when it is not needed, or when
leaving it unattended for long periods.
Rear

(The configuration at the back of the monitor may vary from product to product.)
1. DOWN :
Connect the DOWN port of the USB monitor and a USB
device with the USB cable.
2. UP :
Connect the UP port of the monitor and the USB port of the
computer with the USB cable.
zTo use DOWN, you have to connect the
UP to the PC.
zMake sure to use the USB cable supplied with
this monitor to connect the monitor's UP port
and
y
our com
p
uter's USB
p
ort.
DVI IN
Connect the DVI-D (Dual link) Cable to the DVI IN port on the
back of your monitor.
zBy using DVI-D (Dual link), you can expect
twice faster speed and improved signal
quality than those of DVI-D (single link).
zIt is strongly recommended using DVI-D (Dual
link) Cable for the best quality and speed.
1. ON [ | ] / OFF [O]
Switch the monitor on and off.
2. POWER
Connect the power cord for your monitor to the POWER port
on the back of the monitor.
Kensington Lock
The Kensington lock is a device used to physically fix the
system when using it in a public place.
(The locking device has to be purchased separately.)
For using a locking device, contact where you
purchase it.

Stand Stopper
Remove the fixing pin on the stand to lift the monitor up and
down.
See Connecting the Monitor for further information regarding cable connections.

Connectin
g
the Monitor
1. Connect the power cord for your monitor to the POWER port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Using the DVI (Digital) connector on the video card.
Connect the DVI-D (Dual link) Cable to the DVI IN Port on the back of your Monitor.
[ DVI IN]
Turn on your computer and monitor. If your monitor displays an image, installation is
completed.
Connectin
g
USB
You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard
disk drive by connecting them to the DOWN port of the monitor without connecting
them to the PC.
The USB port of the monitor supports High-Speed Certified USB 2.0.
High speed Full speed Low speed

Data Rate 480 Mbps 12 Mbps 1.5 Mbps
Power Consumption 2.5W
(Max., each port)
2.5W
(Max., each port)
2.5W
(Max., each port)
Connect the UP port of the monitor and the USB port of the computer with the USB cable.
Connect the DOWN port of the USB monitor and a USB device with the USB cable.
The use procedures are as the same as those for using an external device connecting to the
PC.
zYou can connect and use a keyboard and mouse.
zYou can play a file from a media device.
(Examples of media devices: MP3, digital camera, etc.)
zYou can run, move, copy or delete the files on the storage device.
(Examples of storage devices: external memory, memory card, memory reader, HDD-type
MP3 player, etc.)
zYou can use other USB devices that can be connected to a computer.
To use DOWN port, you have to connect the UP (Upstream Cable) to the PC.
Make sure to use the USB cable supplied with this monitor to connect the
monitor's UP port and your computer's USB port.

zWhen connecting a device to the DOWN port of the monitor, connect the
device using a cable appropriate to the device.
(For the purchase of the cable and external devices, ask the service center of
the corresponding product.)
zThe company is not liable for problems or damages to an external device
caused by using an unauthorized cable for the connection.
zSome products do not follow the USB standard, and it may cause a
malfunction of the device.
zIf the device malfunctions even if it is connected to the computer, contact the
service center of the device/computer.
Usin
g
the Stand
Slidin
g
stand
A
.Stand Stoppe
r
Swivel stand
Using ( ),You can swivel the monitor left and right at an angle of 90° to set the monitor
lengthwise. The rubber under the stand is to avoid the monitor slide.
Tilt an
g
le

Using ( ), You can adjust the tilt anlgle within a range of 3° forward to 25° backward for the
most comfortable viewing angle.
Attaching a Base
This monitor accepts a 200 mm x 100 mm / 100 mm x 100 mm VESA-compliant Mounting
interface pad.
A. Monitor
B. Mounting interface pad (Sold separately)
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the
screen.
3. Remove four screws and then remove the stand from the LCD monitor.
4. Align the Mounting interface pad with the holes in the rear cover mounting pad and secure it
with four screws that came with the arm-type base, wall mount hanger or other base.
zDo not use screws longer than the standard dimension, as they may damage the inside
of the Monitor.
zFor wall mounts that do not comply with VESA standard screw specifications, the length
of the screws may differ depending on their specifications.
zDo not use screws that do not comply with the VESA standard screw specifications.
Do not fasten the screws too tightly, as this may damage the product or cause the
product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
zSamsung is not liable for product damage or personal injury when a non-VESA or non-
specified wall mount is used or the consumer fails to follow the product installation
instructions.
zTo mount the monitor on a wall, you should purchase the wall mounting kit that allows

you to mount the monitor at least 10 cm away from the wall surface.
zContact the nearest Samsung Service Center for more information. Samsung
Electronics will not be responsible for damages caused by using a base other than
those specified.
zPlease use Wall Mount according to the International standards.