Samsung DBJ User manual

User Manual

to change without prior notice to improve the performance.
Recommended hours of use per day for the DBJ, QBH, QHH models is less than 16 hours.

DBJ (DB43J DB49J)
QBH (QB65H QB75H)
QHH (QH55H QH65H)
QMH (QM49H QM55H QM65H)

Table of contents
Before Using the Product
Copyright 6
Safety Precautions 7
Cleaning 7
Storage 8
Electricity and Safety 8
Installation 9
Operation 11
Preparations
Checking the Components 14
Components 14
Parts 15
Control Panel 15
Reverse Side 19
Anti-theft Lock 22
Remote Control 23
Before Installing the Product (Installation
Guide) 25
Tilting Angle and Rotation 25
Ventilation 25
Installing the Wall Mount 27
 
 
 
Remote Control (RS232C) 30
 
Connection 33
Control Codes 34
Connecting and Using
a Source Device
Before Connecting 42
Pre-connection Checkpoints 42
Connecting to a PC 42
 
 
 
 
Connecting an External Monitor 45
Connecting to a Video Device 46
 
 
Connecting to an Audio System 47
Power cord connection guide 48
Attaching the Network box (Sold separately) 49
Connecting the Network box (Sold
separately) 50
 
Changing the Input source 52
Source 52
 Browser 53
Remote orkspace 54
Using MDC
MDC Programme Installation/Uninstallation 55
Installation 55
Uninstallation 55
Connecting to MDC 56
Using MDC via RS-232C (serial data
communications standards) 56
Using MDC via Ethernet 57
Player feature
Player 59
Viewing content 59
 
 
Player 61
Schedule 66
Clone Product 67
ID Settings 68
Device ID 68
Device ID Auto Set 68
PC Connection C 68
Video Wall 69
Video all 69
2

Table of contents
Horizontal x Vertical 69
Screen Position 
Format 
Network Status 71
Picture Mode 72
On/Off Timer 73
On Timer 73
Off Timer 74
Holiday Management 74
Ticker 75
URL Launcher 76
URL Launcher Settings 77
Approving a connected device from the server 78
Setting the current time 79

Picture Mode 80
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R) 81
Colour Temperature 82
White Balance 83
2 Point 83
 Point Settings 83
Gamma 84
HLG / ST. / BT.1886 84
Calibrated value 84
Advanced Settings 85
Contrast Enhancer 85
Black Tone 85
Flesh Tone 85
RGB Only Mode 85
Colour Space Settings 86
HDMI UHD Color 86
Motion Lighting 86
HDR+ Mode 86
Picture Options 87
Colour Tone 87
Digital Clean View 87
HDMI Black Level 88
Film Mode 88
Auto Motion Plus Settings 89
Local Dimming 89
Dynamic Backlight 
Picture Size Settings 91
Picture Size 91
Fit to screen 91
Zoom and Position 91
Reset Picture 92
OnScreen Display
Display Orientation 93
Onscreen Menu Orientation 93
Source Content Orientation 93
Aspect Ratio 93
Screen Protection 94
Auto Protection Time 94
Screen Burn Protection 94
Message Display 97
Source Info 97
No Signal Message 97
MDC Message 97
Download Status Message 97
Language 98
Reset OnScreen Display 98

Sound Mode 99
Balance 100
Equaliser 100
HDMI Sound 100
Sound on Video Call 100
Sound Output 101
Auto Volume 101
3

Table of contents
Reset Sound 101
Network
Network Status 102
Open Network Settings 102
Network Type 
 
 
Use  
Server Network Settings 108
Connect to server 
MagicInfo Mode 
Server Access 
FTP Mode 
Proxy server 
Device Name 108
System
Accessibility 109
High Contrast 
Enlarge 
Start Setup 110
Touch Control 110
Touch Control 
Admin Menu Lock 
Time 111
Clock Set 111
DST 111
Power On Delay 111
Auto Source Switching 112
Auto Source Switching 112
Primary Source Recovery 112
Primary Source 112
Secondary Source 112
Power Control 113
Auto Power On 113
PC module power 113
Max. Power Saving 113
S Control 114
Network S 114
Power Button 114
Eco Solution 115
Energy Saving Mode 115
Eco Sensor 115
Screen Lamp Schedule 116
No Signal Power Off 116
Auto Power Off 116
Temperature Control 117
External Device Manager 118
 Manager 118
Device Connection Manager 118
Play via 119
Change PIN 119
Security 120
Safety Lock On 
Button Lock 
USB Auto Play Lock 
M Connection Lock 121
Remote Management 121
Network Port 121
USB Port 121
General 122
Smart Security 122
Anynet+ (HDMI-CEC)122
HDMI Hot Plug 124
Custom Logo 124
Game Mode 125
Empty Storage 125
Irregular Video all 125
Reset System 126
Support
Software Update 127
Update Now 127
Auto update 127
Contact Samsung 127
Reset All 127
4

Table of contents

Requirements Before Contacting Samsung
Customer Service Centre 128
Testing the Product 128
Checking the Resolution and Frequency 128
Check the followings. 129
Q & A 135
Specifications
General 136
Preset Timing Modes 138
Appendix
Responsibility for the Pay Service (Cost to
Customers) 143
Not a product defect 143

fault 143
Others 143
Prevention of Afterimage Burn-in 144
 
Recommended prevention practices 144
Licence 145
Terminology 146
5

6
Before Using the Product
Copyright


Samsung Electronics owns the copyright for this manual.


VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

 
– (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
– 
(i.e. where you have failed to read this user manual).
 
out.
Chapter 01

7
Safety Precautions
Warning

Caution



Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
1
Power off the product and computer.
2
Disconnect the power cord from the product.

wet hands. Otherwise, an electric shock may result.
!
3

Do not use detergents that contain alcohol, solvent
or surface-active agents.
Do not spray water or detergent directly on the
product.
4

the exterior of the product.
5
Connect the power cord to the product when cleaning is
finished.
6
Power on the product and computer.

8
Storage

white-coloured stains on the product.
Contact Customer Service Centre if the inside of the product needs cleaning (service fee will

Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not use multiple products with a single power socket.
Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric
shock may result.
!
Insert the power plug all the way in so it is not loose.
An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
 


Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
A fire or electric shock may result.
!
Clean any dust around the pins of the power plug or the power socket
with a dry cloth.
A fire may result.

9
Caution

 
!

not use the power cord with other products.
A fire or electric shock may result.
!


 
product when an issue occurs.
 

!
Hold the plug when disconnecting the power cord from the power
socket.
An electric shock or fire may result.
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON
TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT
SOURCES.
A fire may result.
!
Have a technician install the wall-mount hanger.
 
 
Do not install the product in poorly ventilated spaces such as a

An increased internal temperature may cause a fire.
!

ventilation.
An increased internal temperature may cause a fire.
!

Children may suffocate.



(insecure shelf, sloped surface, etc.)
 

 
the product or cause a fire.
!
Do not install the product in a vehicle or a place exposed to dust,
moisture (water drips, etc.), oil, or smoke.
A fire or electric shock may result.

such as a stove.
 
Do not install the product within the reach of young children.
 
 
surface.

not install the product in a kitchen or near a kitchen counter.
Caution
!
Do not drop the product while moving.
 
Do not set down the product on its front.
 


 

 
!
Set down the product gently.
 
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of

presence of moisture, or a place where the product will operate
continuously for an extended period of time) may seriously affect its
performance.
Be sure to consult Samsung Customer Service Centre if you want
to install the product at such a place.

11
Operation
Warning

or modify the product yourself.
A fire or electric shock may result.
Contact Samsung Customer Service Centre for repairs.
!
Before moving the product, turn off the power switch and disconnect

Damage to the cord may result in a fire or electric shock.
!

disconnect the power cord immediately and contact Samsung
Customer Service Centre.
An electric shock or fire may result.

 
If the product is dropped or the outer case is damaged, turn off the
power switch and disconnect the power cord. Then contact Samsung
Customer Service Centre.
Continued use can result in a fire or electric shock.

etc.) on top of the product.
 

!
During a lightning or thunderstorm, power off the product and

A fire or electric shock may result.
!

A fire or electric shock may result.

Product failure, an electric shock or fire may result from a

!GAS
If a gas leakage is found, do not touch the product or power plug.
Also, ventilate the area immediately.
Sparks can cause an explosion or fire.


Product failure, an electric shock or fire may result from a


12
!

near the product.
An explosion or fire may result.

An increased internal temperature may cause a fire.
100


vent or input/output ports, etc).
Be sure to power off the product and disconnect the power

product. Then contact Samsung Customer Service Centre.
Product failure, an electric shock or fire may result.


Be sure to power off the product and disconnect the power

product. Then contact Samsung Customer Service Centre.
Product failure, an electric shock or fire may result.
Caution
!
Leaving the screen fixed on a stationary image for an extended period

Activate power-saving mode or a moving-picture screen saver if

-_-
!
Disconnect the power cord from the power socket if you do not plan
on using the product for an extended period of time (vacation, etc).
 
shock or electric leakage.
!
Use the product at the recommended resolution and frequency.
Your eyesight may deteriorate.

 
!
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
A fire or electric shock may result.

13
!
Rest your eyes for more than 5 minutes for every1 hour of product
use.
 


!
Store small accessories out of the reach of children.
!

 
Tilting the product at an excessive angle may cause the product


 

high.
Having the sound too loud may damage your hearing.


location that children or infants cannot reach.
 
doctor immediately.
!

 

liquid.




!



recycling.
 



14
– Contact the vendor where you
purchased the product if any
components are missing.
– The appearance of the components
may differ from the images shown.
– A stand is not provided with the
product. To install a stand, you can
purchase one separately.
– 
connect to another monitor using the

Checking the Components
Components
Quick Setup Guide 
 Regulatory guide Power cord
Batteries
 Remote Control RS232C(IN) adapter Cover Terminal (Supported models: QHH)

(Supported models: QHH)
HOLDER-CABLE (3 EA)
(Supported models: QBH, QH65H)
Preparations
Chapter 02

15
Parts
Control Panel
DBJ QHH
QB65H / QMH
Speaker Speaker
Speaker
Remote sensor &

Spacer logo
Remote sensor &

QB65H / QHH / QMH

to improve quality.
Parts Description
Spacer logo

Supported models: QB65H, QMH
Remote sensor


product.
Using other display devices in the same space as the remote control of this product

To use remote/eco sensor, make sure the sliding panel key

Supported models: QB65H, QHH, QMH
Panel Key
To use the panel key, make sure the sliding panel key is not

Supported models: QB65H, QHH, QMH





16

If you press the P

Control menu
Power off Source
Press: Move Press & Hold: Select
Buttons Description
Power off
Power off the product.

the cursor to Power off , and then press and hold the panel key to turn off
the product.
Source
Select the connected input source.

the cursor to Source , and then press and hold the panel key to display the
input source screen.

switch to the desired input source.
Power off and Source.
To exit from the control menu screen, wait for 3 seconds or more without pressing the panel key.

17
Control Panel
Speaker

QB75H
Spacer logo
Remote sensor

to improve quality.
Parts Description
Power on the product.
If you press the 
displayed.
To exit the OSD menu, press and hold the panel key for at least one second.

Move to the left or right menu.

menu is not displayed.
Spacer logo 
Remote sensor


product.
Using other display devices in the same space as the remote control of this product






18
If you press the 

Control menu
Home
Return
Power off
Settings Source
Buttons Description
Home Display the Player menu.
Move the panel key up to select Home in the control menu.
Settings
Display the OSD menu.
Move the panel key left to select Settings in the control menu. The OSD
control screen will appear. Move the panel key right to select the desired menu.

To change settings, select the desired menu and press the panel key.
Power off
Power off the product.
Move the panel key down to select Power off in the control menu. Next,
press the panel key.
Source
Select the connected input source.
Move the panel key right to select Source 
list of input sources is displayed, move the panel key left or right to select the
desired input source. Next, press the panel key.
Return Exit the control menu.

19
Reverse Side
The colour and shape of parts may differ from what is shown.

QHH
Port Description
RS232C OUT
Connects to MDC using an RS232C adapter.
RS232C IN
RJ45


*Shielded Twist Pair.
DP IN

HDMI 1 (ARC)

HDMI 2
USB ¨(5V 0.5A)
Connect to a USB memory device.
The USB ports on the product accept a maximum constant current of

USB ¨(5V1A)
Connect to a USB memory device.
The USB ports on the product accept a maximum constant current of



Reverse Side
The colour and shape of parts may differ from what is shown.

QMHQBH
Port Description
USB 1 ¨(1.0A)
Connect to a USB memory device.
The USB ports on the product accept a maximum constant current of

RJ45


*Shielded Twist Pair.
RS232C IN
Connects to MDC using an RS232C adapter.
DVI/MAGICINFO IN


HDMI IN 1 (ARC)

HDMI IN 2
HDMI IN 2 (DAISY CHAIN IN)
DP IN

DP IN (DAISY CHAIN IN)
HDMI OUT (DAISY CHAIN OUT)

USB 2(0.5A)
Connect to a USB memory device.
The USB ports on the product accept a maximum constant current of

DVI/HDMI/AUDIO IN

AUDIO OUT

IR IN

RS232C OUT
Connects to MDC using an RS232C adapter.