Samsung QB43R User manual

BN68-09661D-00
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Quick Setup Guide
QB43R QB49R QB55R QB65R QB75R
*Recommended hours of use per day of this product is under 16 hours. If the product is
used for longer than 16 hours a day, the warranty may be void.
*The colour and the appearance may differ depending on the product, and the content in
the manual is subject to change without prior notice to improve the performance.
*Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
Contact the vendor where you purchased the product if any
components are missing.
The appearance of the components may differ from the images shown.
Quick Setup Guide
Warranty card
(Not available in
some locations)
Power cord
Batteries (AAA x 2)
(Not available in
some locations)
Remote Control RS232C(IN) adapter
HOLDER-CABLE
(Supported models:
QB65R, QB75R)
Holder-Ring x 4
Checking the Components Parts
1 Remote sensor
Press a button on the remote control pointing at the sensor on
the front of the product to perform the corresponding function.
*Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
2 Power indicator
3 Power button
Turns the product on or off.
32
1
Speaker
Ports
2
3
4
5
1
7 8
09
6
1 Connect to a USB memory device.
*The USB ports on the product accept a maximum constant
current of 1.0A.
If the maximum value is exceeded, USB ports may not work.
2 Connects to MDC using a LAN cable. (10/100 Mbps)
3 Connects to MDC using an RS232C adapter.
4 DVI IN: Connects to a source device using a DVI cable or HDMI-
DVI cable.
MAGICINFO IN: Connects to a network box using DP-DVI cable to
use Magicinfo.
5 Connects to a source device using a HDMI cable or HDMI-DVI
cable.
6 Connect to a USB memory device.
*The USB ports on the product accept a maximum constant
current of 0.5A.
If the maximum value is exceeded, USB ports may not work.
7 Receives sound from a source device via an audio cable.
8 Outputs sound to an audio device via an audio cable.
9 Connects to an external IR cable that receives signals from the
remote control.
0 Connects to MDC using an RS232C adapter.
Troubleshooting Guide
Issues Solutions
The screen keeps
switching on and off.
Check that the cable between the product
and the PC is connected correctly.
No Signal is
displayed on the
screen.
Check that the product is connected
correctly with a cable.
Check that the source device connected to
the product is powered on.
Depending on the type of external device,
the screen may not display properly. In this
case, connect it with the HDMI Hot Plug
function turned On.
Not Optimum Mode
is displayed.
This message is displayed when a
signal from the graphics card exceeds
the product’s maximum resolution and
frequency.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
Issues Solutions
There is no image
on the screen and
the power indicator
blinks every 0.5 to 1
second.
The display is turned off to save energy.
Press any key on the keyboard or move the
mouse to return to the previous screen.
The remote control
does not work.
Make sure that the batteries are correctly in
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is
connected.
Check for any special lighting or neon signs
switched on in the vicinity.
BN68-09661D-00_QSG_QBR_INDIA_ENG.indd 1 2019-06-17 오후 5:53:11

Model Name QB43R QB49R QB55R
Panel
Size 107.9 cm 123.2 cm 138.7 cm
Display area 941.184 mm (H) x 529.416 mm (V) 1073.78 mm (H) x 604.0 mm (V) 1209.6 mm (H) x 680.4 mm (V)
Model Name QB65R QB75R
Panel
Size 163.9 cm 189.3 cm
Display area 1428.48 mm (H) x 803.52 mm (V) 1650.24 mm (H) x 928.26 mm (V)
Power Supply AC100-240V~ 50/60Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental
considerations
Operating Temperature: 0 °C – 40 °C (32 °F – 104 °F)
Humidity: 10% – 80%, non-condensing
Storage Temperature: -20 °C – 45 °C (-4 °F – 113 °F)
Humidity: 5% – 95%, non-condensing
*This device is a Class B digital apparatus.
*For detailed device specifications, visit the Samsung Electronics website.
*The PVC Free (except for accessory cables) logo is the self-declared trademark of Samsung.
- Accessory cables: signal cables and power cords
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Tel. 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free)
www.samsung.com/in/support
Warning! Important Safety Instructions
Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
This product is RoHS compliant.
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information on safe disposal and recycling visit ourwebsite www.samsung.com/in or contact our Helpline numbers
- 1800 40 SAMSUNG(1800 40 7267864) (Toll-Free)
» If your equipment uses an AC adapter:
- Only use the AC adapterwith your product by
Samsung.
- Do not use the power cord with other products.
» Do not install this equipment in a confined space such as a case
or similar.
» The slots and openings in the cabinet and in the back or bottom
are provided for necessary ventilation. The slots and openings
must never be blocked or covered.
» The product should be located away from heat sources such as
radiators, heat registers, or other products that produce heat.
» Do not place a vessel containing water (vases etc.) on this
apparatus, as this can result in a risk of fire or electric shock.
(Apparatus shall not be exposed to dripping or splashing)
» The apparatus must be connected to an earthed MAINS socket-
outlet (Class l Equipment only). Or Use only a properly grounded
plug and receptacle (Class l Equipment only).
» To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug shall
be readily operable.
» As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by POWER.
Specifications
Connecting the LAN Cable
Connecting and Using a Source Device
Connecting to a PC
DP IN
DVI/MAGICINFO IN
DVI/HDMI AUDIO IN
HDMI IN 1 (ARC), HDMI IN 2
DVI/HDMI AUDIO IN
DVI/PC/MAGICINFO IN
DVI/PC/HDMI/AUDIO IN
HDMI IN 1 (ARC), HDMI IN 2
RGB IN
AUDIO IN
DP IN
DVI/MAGICINFO IN
DVI/HDMI AUDIO IN
HDMI IN 1 (ARC), HDMI IN 2
DVI/HDMI AUDIO IN
DVI/PC/MAGICINFO IN
DVI/PC/HDMI/AUDIO IN
HDMI IN 1 (ARC), HDMI IN 2
RGB IN
AUDIO IN
DP IN
DVI/MAGICINFO IN
DVI/HDMI AUDIO IN
HDMI IN 1 (ARC), HDMI IN 2
DVI/HDMI AUDIO IN
DVI/PC/MAGICINFO IN
DVI/PC/HDMI/AUDIO IN
HDMI IN 1 (ARC), HDMI IN 2
RGB IN
AUDIO IN
Connecting to a Video Device
HDMI IN 1 (ARC), HDMI IN 2
DVI/HDMI AUDIO IN
AUDIO OUT
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
DP IN
DVI/MAGICINFO IN
DVI/HDMI AUDIO IN
HDMI IN 1 (ARC), HDMI IN 2
DVI/HDMI AUDIO IN
DVI/PC/MAGICINFO IN
DVI/PC/HDMI/AUDIO IN
HDMI IN 1 (ARC), HDMI IN 2
RGB IN
AUDIO IN
Connecting to an Audio System
HDMI IN 1 (ARC), HDMI IN 2
DVI/HDMI AUDIO IN
AUDIO OUT
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
HDMI IN 1, HDMI IN 2
AUDIO IN
AUDIO OUT
DCJ: AV/COMPONENT IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: DVI/HDMI/AUDIO IN
DCJ: AV/COMPONENT IN
RJ45
Use Cat7(*STP Type) cable for the connection. (10/100 Mbps)
*Shielded Twist Pair
RS232C IN
RS232C IN
RJ45
HUB
RS232C OUT
RJ45
RS232C OUT
RS232C IN
RS232C IN
RJ45
HUB
RS232C OUT
RJ45
RS232C OUT
RS232C IN
RS232C IN
RJ45
HUB
RS232C OUT
RJ45
RS232C OUT
For details on how to use the MDC programme, refer to Help after
installing the programme.
The MDC programme is available on the website.
http://www.samsung.com/displaysolutions
Connecting to MDC
BN68-09661D-00_QSG_QBR_INDIA_ENG.indd 2 2019-06-17 오후 5:53:14