Samsung SyncMaster U70 User manual

SyncMaster U70
LCD Monitor
User Manual

Safety Instructions
Notational
Note
These safety instructions must be followed to ensure your safety and prevent property dam-
age.
Make sure to read the instructions carefully and use the product in the correct manner.
Warning / Caution
Otherwise, it may result in death or personal injury.
Otherwise, it may result in personal injury or property damage.
Installation
Be sure to contact an authorized Service Center when installing your
monitor in a location with heavy dust, high or low temperatures, high hu-
midity, and exposed to chemical substances and where it operates for 24
hours such as at airports, train stations etc.
Failure to do so may cause serious damage to your monitor.
When installing the product in a cabinet or rack, make sure that
the front end of the bottom of the product does not project out.
• Otherwise, it may fall or cause personal injury.
• Use a cabinet or rack of a size appropriate to the product.
Do not use a humidifier or kitchen table near the product.
• Otherwise, this may result in electric shock or fire.
Put down the monitor carefully.
• Failing to do so may damage the monitor.
Do not drop the monitor when moving it.
• This may cause damage to the product or the person carrying
it.
Do not install the product in a location low enough for children
to reach.
• Otherwise, it may fall and result in personal injury.
Others
Do not insert any metal, such as chopsticks, coins, pins and
steel, or flammable objects, such as matches or paper, inside the
product (input and output terminals, etc).
• Otherwise, this may result in electric shock or fire.

The product is a high voltage product. Ensure that users do not
disassemble, repair or modify the product themselves.
• Otherwise, this may result in electric shock or fire. If the product
needs to be repaired, contact a Service Center.
Safety Instructions

Introduction
Package Contents
Note
Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.
Unpacking
USB Monitor
Manuals
Quick Setup Guide Warranty Card
(Not available in all loca-
tions)
User's Guide
Cables
USB Cable
Others
Cleaning Cloth
Note
Cleaning Cloth is only provided for highly polished black products as a product feature.

Your Monitor
Front
Use this button to decrease the screen brightness for the 7" USB monitor.
The LED blinks when the screen brightness is decreased to the minimum
or when a screen brightness adjustment is completed.
Use this button to increase the screen brightness for the 7" USB monitor.
The LED blinks when the screen brightness is increased to the maximum
or when a screen brightness adjustment is completed.
Power button [ ] / Power indicator
Press the Power button to turn the 7" USB monitor on or off. The Power
indicator is displayed in blue when operating normally.
• Please activate the afterimage prevention function before using the 7"
USB auxiliary monitor.
• Activating the function
Turn off the USB monitor and hold down the Power button for five (5)
seconds. The monitor is turned on again and the afterimage prevention
program is activated while the LED blinks twice.
• Deactivating the function
Turn off the USB monitor and hold down the Power button for five (5)
seconds. The monitor is turned on again and the afterimage prevention
program is deactivated while the LED blinks once.
• What is the afterimage prevention function?
If you use the USB auxiliary monitor with the same image remaining on
the screen for a long period of time, an afterimage may develop on the
panel. The afterimage prevention function reduces afterimages on the
panel by turning the USB auxiliary monitor on and off automatically for
a short time (about 0.1 seconds) every thirty (30) minutes.
Introduction

Rear
Note
The configuration at the back of the product may vary from product to product.
Connect the terminal of the USB monitor
to the USB terminal of the PC using a USB
cable.
Kensington Lock
The Kensington Lock is a device used to
physically fix the system when using it in a
public place. The locking device has to be
purchased separately. The appearance and
locking method may differ from the illustra-
tion depending on the manufacturer. Refer to
the manual provided with the Kensington
Lock for proper use. The locking device has
to be purchased separately.
Note
The location of the Kensington Lock may be
different depending on its model.
Using the Anti-Theft Kensington Lock
1. Insert the locking device into the Ken-
sington slot on the Monitor ( ) and turn
it in the locking direction ( ).
2. Connect the Kensington Lock cable.
Introduction

3. Fix the Kensington Lock to a desk or a
heavy stationary object.
Introduction

Connections
Connecting the USB Monitor
• System Requirements
CPU : 1.73GHz or Later
OS : Windows XP Service Pack2 or later.
RAM : 512 MB RAM or more
USB : 1.1 or higher (USB 2.0 recommended)
1. Connect the terminal of the USB monitor to the USB terminal of the PC using a USB
cable.
Note
As power is supplied through a USB port, two (2) USB ports are used.
For more information on the driver installation and usage of the USB monitor, refer to Installing
the 7” USB Monitor Driver.

1. When adjusting the angle of the USB auxiliary monitor stand, do not use too much force.
This may cause the stand to break.
2. Make sure to use the 7” USB monitor after properly adjusting the angle of its stand.
This may cause the center of gravity of the product to change, leading causing the prod-
uct to fall resulting in damage or a malfunction.
Connections

Using the Software
Installing the 7” USB Monitor Driver
• System Requirements
CPU : 1.73GHz or Later
OS : Windows XP Service Pack2 or later.
RAM : 512 MB RAM or more
USB : 1.1 or higher (USB 2.0 recommended)
Installing Your USB Monitor
•Make sure to connect the USB cable and begin the installation after your
PC has booted.
• The Setup program requires about one minute for the installation. If you
turn the power off or remove the USB cable while the Setup program is
running, it may cause an error with the PC or the Windows operating sys-
tem.
• The optimal resolution for this USB monitor is 800x480.
1. Insert CD into the CD-ROM drive. Click "USB Monitor Driver"
2. Click "I Accept".
3. The progress window appears, as shown in the figure below.
4. If you connect your USB monitor to your PC, it recognizes the monitor and the "Found
New Hardware" wizard is displayed, as shown in the figure below.