Samsung PN50C550 User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Comment contacter Samsung darts le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs
Samsung.
Comuniquese con SAMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relaci6n con los productos de Samsung, comuniquese con el centre de
atencion al cliente de SAMSUNG.
CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Canada
MEXICO 01-800-SAMSUNG (726-7864) www.samsung.com C.P 11570 AV. Presidente Masaryk No.111, Int. 701
Col. Chapultepec Morales, Delegacion Miguel Hidalgo
Mexico D.F
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 105 Challenger
Road Ridgefield Park, NJ 07660-0511
©2010 Samsung Electronics Co., Ltd. All rights reserved, BN68-02580A-01
imagine the possibilities
ThanK you for purchasing this Samsung product.
To receive more comDlete service, please register
your product at
www.samsu ng.com/register
Mode _Serial No.
0 BN68 02580A Eng Cover.indd 1 2010 02 12 £# 4:41:10

Figures and illustrations inthis User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
'_bs See the warranty card for more information on warrantyterms.
Wide screen format PDP Displays (16:9, the aspect ratio of the screenwidth to height) areprimarily designed to viewwide screenformat full-motion video.
The imagesdisplayed on them should primarilybe in the wide screen 16:9 ratio format, or expanded tofill the screenifyour model offers this feature and
the images are constantly moving. Displaying stationary graphics and images on screen, such asthe dark side-bars on no expanded standard format
televisionvideo and programming, should be limited to no more than 5% ofthe total televisionviewing per week.
Additionally,viewing other stationaryimages and text such as stock market reports, video game displays,station Iogos, web sites or computer graphics
and patterns, should be limitedas described above for all televisions. Displayingstationaryimages that exceed the above guidelinescan cause uneven
aging of PDP Displays that leavesubtle, but permanent burned-in ghost images in the PDP picture.Toavoid this, vary the programming and images,and
primarily displayfull screen moving images, not stationary patternsor dark bars.
On PDP models that offerpicture sizing features, use thesecontrols to view different formats as a full screen picture.
Be careful in the selection and duration of televisionformats usedfor viewing. Uneven PDPaging as a result offormat selection and use, aswell as burned
in images, are not covered by your Samsung limited warranty.
• SAMSUNG ELECTRONICS NORTHAMERICAN LIMITEDWARRANTY STATEMENT
Subject to the requirements,conditions, exclusions and limitations of the original Limited Warrantysupplied with Samsung Electronics (SAMSUNG)
products, and the requirements, conditions, exclusions and limitations contained herein,SAMSUNG will additionally provide Warranty Repair Service
in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the
warranty period originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized ServiceCenter. Along withthis Statement, the Original Limited
Warranty Statement and a dated Billof Saleas Proofof Purchase must be presented to the Service Center.Transportation to andfrom the Service
Center isthe responsibility ofthe purchaser.Conditions covered are limited only to manufacturing defects in material or workmanship, and onlythose
encountered in normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or
replacements, accessories, options, upgrades, or consumables.
Forthe location of a SAMSUNG Authorized ServiceCenter, please calltoll-free:
- Inthe UnitedStates: 1-800-SAMSUNG (1-800-726-7864)
- InCanada: 1-800-SAMSUNG
• Screen image retention
Do not display a still image (such as on avideo game)on the plasma display panel for more than several minutes as it can causescreen image
retention.This image retentionis also known as "screenburn". Toavoid such image retention, referto page 14of this manual to reduce the degree of
brightness and contrast of the screenwhen displaying a still image.
• Heat on the top of the Plasma'lV
Thetop side of the product may be hot after long periods of use as heatdissipates from the panel through the vent hole in the upper part ofthe
product.
This is normal anddoes not indicate anydefect or operation failureof the product.
However, chikJrenshould be prevented from touching the upper part of the product,
• The product is making a"cracking" noise.
A "cracking" noise may occur when the product contracts or expands due to a change in the surrounding environmentsuch as temperature or
humidity. This is normaland not a defect of the unit.
• Cell Defects
The PDP uses a panelconsisting of 2,360,000(HDqevel) to 6,221,000(FHD-level)pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixelson the screen.These pixeIswill have no impact on the performance ofthe product.
• Avoid operating the TV at temperatures below 41°F (5°0)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TVin 4:3 format for a long period of time may leavetraces of borders displayed on the left, rightand center of
the screencaused by the differenceof light emission on the screen.Playing a DVDor a game console may cause similareffects to
the screen.
Damages caused by the above effect arenot covered by the Warranty.
• After-imageson the Screen.
Displaying still images from Video games and PCfor longer than a certain period of time may produce partialafter-images.
Topreventthis effect, reduce the "brightness" and "contrast" when displaying stillimages for a long time.
• Warranty
Warranty does not cover any damagecaused by image retention.
Burn-in isnot covered by the warranty.
English
[PC550]BN68 02580A Eng.indb 2 2010 02 10 25 4:50:43

Contents
• List of Features ......................................................... 4
• Accessories .............................................................. 4
• Install the Stand ........................................................ 5
• Viewing the Control Panel ......................................... 6
• Viewing the Remote Control ...................................... 7
• Connecting to anAntenna ........................................ 9
• Plug & Play (InitialSetup)........................................... 9
• Connecting to anAV Device .................................... 10
• Connecting to anAudio Device ............................... 11
• Connecting to a PC ................................................ 12
• Changing the Input Source ..................................... 14
• How to Navigate Menus .......................................... 14
• Channel Menu ........................................................ 15
SeeingChannels 15
UsingFavorite Channels 15
Memorizingchannels 15
Editing Channels 16
Other Features 16
• Picture Menu .......................................................... 17
Changingthe Preset PictureMode 17
Adjusting PictureSettings 17
EconomicalSolutions 17
Changingthe Picture Options 18
Settingup the TVwith YourPC 20
• Sound Menu ........................................................... 21
Changingthe Preset Sound Mode 21
Adjusting Sound Settings 21
Sound Settings 21
• Setup Menu ............................................................ 22
Settingthe Time 22
Usingthe SleepTimer 22
Settingthe On /OffTimer 22
Locking Programs 23
Other Features 24
Picturein Picture(PIP) 26
Support Menu ......................................................... 26
• Network Connection ............................................... 28
Connecting to a Wired Network 28
Connecting to a Wireless Network 30
• Media Play.............................................................. 34
Connecting a USB Device 34
Connecting to your PC through a network 34
Screen Display 36
PlayingMultiple Files 39
Media Play - Additional Functions 39
Anynet+ .................................................................. 41
SettingUp Anynet+ 42
Switching between Anynet+ Devices 43
Recording 43
Listeningthrough a Receiver 43
Troubbshooting for Anynet+ 44
AIIShare .................................................................. 45
About AlIShare 45
SettingUp AlIShare 45
• Installing theWall Mount ......................................... 47
• Assembling the Cables ........................................... 48
• Securing the Installation Space ............................... 48
• Securing the TV to the Wall..................................... 49
• Troubleshooting ...................................................... 50
• Specifications ......................................................... 53
License 53
• Dimensions ............................................................. 54
• Index ...................................................................... 55
Thisfunctioncanbeusedby pressingthe
TOOLSbuttonontheremotecontrol.
Check the Symbol!
Note
Indbatesadditionalinformation.
®
Step by Step Guide
Checkhereforinstructionsonhowto open
therebvantsubmenuwithintheOSD(on
screendisplay).
English 3
[PC550]BN68 02580A Eng.indb :3 2010 02 10 25 4:50:44

Getting Started
• Excellent Digital Interface & Networking never put a space before punctuation: With a built-in HD digital tuner,
nonsubscription HD broadcasts can be viewed without a cable box /STB (Set-Top-Box) satellite receiver.
• Media Play: Allows you to play music files, pictures, and movies saved on a USB device (p. 84).
• AliShare: AIIShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 45).
• Self Diagnosis: You can check to make sure picture and sound operate normally (p. 26),
Please make sure the following items are included with your PDP TV. if any items are missing, contact your dealer.
The items' colors and shapes may vary depending on the models.
M4 XL16
Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from interference,
When connecting a cable, open the ferrite core and clip it around the cable near the plug as
shown in the figure,
* A (Distance between the ferrite core and one end of the cord put into the TV set): below
50ram
* B (Distance between the ferrite core and the other end of the cord put into the outlet): below
20mm
English
[PC550]BN68 02580A Eng.indb 4 2010 02 10 25 4:50:45

See separate guide for installing the stand.
or (M4 X L12)
Follow the steps below to connect the TV to the stand.
Screws(M4XL12)...._;lp :: Topvbw ::
+i++`++°<-+::::I_ i
GuideStand-- ,_+
Stand-. Front
,S " "
Screws(M4XL12)-- ....
Rea_ .....@+........
1. Connect the Guide Stand to the Stand using five screws (M4 X L12) as shown.
. "_. _ --.. +
..............++->--,+,.,° ......
2. With your TV upright, connect the TV to the Stand as
shown. 3. Fasten two screws (M4 X L12) at position O, and then
fasten two screws (M4 X L12) at position O+
NOTE
"Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them+
" Make sure that at least two persons lift and move the PDP TV.
" Stand the product up and fasten the screws. Ifyou fasten the screws with the PDP TV placed down, it may lean to
one side+
English 5
[PC550]BN68 02580A Eng.indb 5 2010 02 10 2_ 4:50:47

Getting Started
The product color and shape may vary depending on the model,
Speakers
so$co
CH
v
•-- Power Indicator
-- Remotecontrol sensor
_eURCE_
Power Indicator
d) (Power)
Remote control sensor
Toggles between allthe available input sources. Inthe on-screen menu, use this
button as you would use the ENTERIZ_ button on the remote control,
Displays an on-screen menu, the OSD (on screen display) of your TV'sfeatures.
Adjusts the volume. Inthe OSD, use the --VOL÷ buttons as you would use the
and !_ buttons on the remote control.
Changes the channels. Inthe OSD, use the V CH A buttons as you would use the
Ir and A buttons on the remote control,
Blinks and turns off when the power is on and lights up in standby mode.
Turns the TV on or off.
Aim the remote control towards this spot on the TV.
Standby mode
Do not leaveyour TV in standby mode for long periods of time (when you are away on a holiday, for example), A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
[PC550]BN68 02580A Eng.indb 6 2010 02 10 2_ 4:50:47

This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume
buttons.
PN500550 /PN500590 /PN580550 /PN580590
Turns the TV on and off.
Displays and selects tile availablevideo
sources (p. 14).
Pressto directly access channels.
Pressto select additional channels
(digital)being broadcasted by the
same station. For example, to select
channel "54-3", press "54", then press
"-" and "3".
Adjusts the volume.
Bringsup the OSD.
Disphys Media Play (USB) (p.34).
QuicHy select frequently used functions.
Returnsto the previous menu.
Buttons used in tlqeChannel list, Media
Play (USB) menu, etc.
Use these buttons in Media Play
(USB)and Anynet+ (HDMI-CEC) modes
(p.34, 41). (_: Controls recording
for Samsung recorders that havethe
Anynet+ feature)
Turnsthe remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Usingthe remote control with this button
set to off will reduce the battery usage
time.)
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays the channel list on the screen
(p. 15).
Displays Favorite Channel Lists on the
screen (p. 15).
Displays information on the TV screen.
Selects the omscreen menu items and
changes the valuesseen on tile menu.
Exitsthe menu.
S,MODE: Press to select the sound
mode (p.21).
SLEEP: Automatically shuts off the TV
at a preset time. (p. 22).
MTS: Press to choose stereo, mono
or SeparateAudio Program (SAP
broadcast) (p.21).
RMODE: Pressto select the picture
mode (p. 17).
RSlZE: Selects the picture size(p. 19).
CC: Controls the caption decoder (p.
24).
English 7
[PC550]BN68 02580A Eng.indb 7 2010 02 10 25 4:50:48

Getting Started
PN500540 /PN580540
Turnsthe TV on and off. Displays and sebcts the available video
sources (p. 14).
Selects the HDMI mode directly.
Pressto directly access channels. 1
Press to select additional channeb
(digital)being broadcasted bythe same
station. Forexample, to select channel
"54-3", press "54", then press "-" and
"3".
Adjusts the volume.
Bringsup tile OSD.
Displays Media Play (USB) (p.34).
Quickly select frequently used functions.
Returns to tile previous menu,
Buttons used in the Channel list, Media
Play (USB) menu, etc.
Use these buttons in Media Play
(USB)and Anynet+ (HDMI-CEC) modes
(p. 34, 41). ([_3: Controb recording
on Samsung recorders that havethe
Anynet+ feature)
Returnsto the previous channek
11
Cuts off tile sound temporarily.
Changes channels.
Displays the channel liston the screen
(p. 15).
Displays Favorite Channel Lists on the
screen (p.15).
Displays information on the TV screen.
Selects tile on-screen menu items and
changes the values seerson the menu.
Exitsthe menu.
S.MODE: Press to select the sound
mode (p. 21).
SLEEP: Automatically shuts off the TV at
a preset time. (p. 22).
MTS: Pressto choose stereo, mono
or Separate Audio Program(SAP
broadcast) (p. 21).
RMODE: Press to select the picture
mode (p. 17).
RSlZE: Selects the picture size (p. 19).
CC: Controls the caption decoder (p.24).
Installing batteries (Battery size: AAA)
NOTE
*Use the remote control within 23 feet from the TV.
*Bright light may affect the performance of the remote
control. Avoid use when nearby fluorescent lights or neon
signs.
*The color and shape may vary depending on the model.
English
[PC550]BN68 02580A Eng.indb 8 2010 02 10 25 4:50:48

When the TV is initiallypowered on, basic settings proceed automatically.
Connecting the power cord and antenna.
VHF/UHFAntenna
Antenna CaNe
(Not Supplied) "_1
Or
When the TV is initiallypowered on, a sequence of on-screen prompts will assist in configuring basic settings. Pressthe
POWER (b button. Plug & Play is available only when the Input source is set to T_.
To return to the previous step, press the Red button.
Selecting a language
Selecting Store Demo
or Home Use
Selecting an antenna
Press the A or _' button, then press the ENTERE__ button. POWER
Select the desired OSD (On Screen Display) language.
Press the ,_ or !_ button, then press the ENTERE_ button.
• Select the Home Use mode. Store Demo Mode is for retail
environments.
,_ To return the unit's settings from Store Demo to Home Use
(standard): Pressthe volume button on the TV.When you
see the volume OSD, press and hold MENU for 5 sec.
Press the A or • button, then press the ENTERI_%_button. Select Air, Cable or Auto.
Selecting acr anne
Setting the Clock
Mode
vtewlng the HD
Connection Guide.
Press the A or T button, then press the ENTERIZ_ button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel --_ Auto Program (p. 15).
Press the ENTERE*3J button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
• Auto: Allows you to select DST (Daylight Saving Time) mode and time zone
• Manual: Allows you to manually set the current date and time (p. 22).
The connection method for the best HD screen quality is displayed.
Press the ENTERI_%_button.
If You Want to Reset This Feature...
MENU iTrl--_ Setup _ Plug & Play _ ENTERI__
English 9
[PC550]BN68 02580A Eng.indb 9 2010 02 10 2_ 4:50:49

Connections
Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver.
PN500540 /PN580540
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
PN500550 /PN500590 /PN580550 /PN580590
HDMI to D\/i Cable (Not Supplied)
Audio Cable (Not Supplied)
HDM_ _NI(DV_), 2, 3, 4, PC/DVI AUDIO _N
* When using an HDMI/DVI cable connection, you must use the HDM_ IN I(DV_)jack for video. A DVD, Blu-ray
player, HD cable box, HD STB satellite receiver may require a DVI-HDMI (DVIto HDMI) cable or DVI-HDMI (DVI
to HDMI) adapter, The PC/DW AUDIO _Njack is required for audio.
* If an external device such as a DVD/Blu-ray player /cable box /STB satellite receiver supporting HDMI
versions older than 1.3 is connected, the TV may operate abnormally (e.g, no screen display /no sound /
annoying flicker/abnormal color).
* Ifthere is no sound after connecting an HDMI cable, check the HDMI version of the external device. Ifyou
suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and
request an upgrade.
* It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a
connection error may occur.
lg English
[PC550]BN68 02580A Eng.indb 10 2010 02 10 £_ 4:50:50

Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver,VCR
(Not Supplied)
(Not SuppJied)
Video Cable
(Not Supplied)
COMPONENT _N1, 2 /AV _N1: When connecting to AV _N1,the color of the AV _N1 [Y/WDEO] jack (green)
will not match the video cable (yellow).
For better picture quality, the Component connection is recomended over the A/V connection.
%,.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Using an Optical Cable (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, DVD home theater
.... !i
Optical Cable (Not Supplied)
m ::i
Audio Cable (Not Supplied)
DIGITAL AUDIO OUT (OPTICAL)
"When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume
of both the TV and the system.
"5.1 OH (channel) audio is available when the TV is connected to an external device supporting 5.1 OH.
"When the receiver (home theater) is set to on, you can hear sound output from the TV's optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 OH sound to the home theater receiver. When the source is
a digital component such as a DVD/Blu-ray player /cable box /STB (Set-Top-Box) satellite receiver and is
connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver, Ifyou want to
hear 5,1 OH audio, connect the digital audio out jack from your DVD/Blu-ray player /cable box /STB satellite
receiver directly to an amplifier or home theater.
AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.
"When connecting, use the appropriate connector.
"When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the
volume level with the amplifier's volume control,
[PC550]BN68 02580A Eng.indb 11 2010 02 10 2_ 4:50:51

Connections
Using an EX-Link Cable Connection
Available Devices: External devices that support EX-Link
EX UNK: Connector for service only,
Audio Cable (N_
HDM] to DVI Cable (Not Supplied)
D-Sub Cable (Not Supplied)
Audio Cable (N_ .....
.......,J'
PN500550 /PN500590 /PN580550 /PN580590
HDM] to DVI Cable (Not Supplied)
D-Sub Cable (Not Supplied)
2 English
[PC550]BN68 02580A Eng.indb 12 2010 02 10 2# 4:50:53

Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution is 1920 X 1080 @60 Hz.
IBM
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT /DTVCEA
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 960
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
1920 x 1080p
31.469
31.469
35.000
49.726
68.681
35.910
53.783
56.456
75.231
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
45.000
49.702
62.795
60.000
47.712
55.935
70.635
65.290
52.500
74.620
67.500
70.086
70.087
66.667
74.551
75.062
59.950
59.959
74.777
74.857
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
60.000
59.810
74.934
60.000
60.015
59.887
74.984
59.954
70.000
70.000
60.000
25.175
28.322
30.240
57.284
100.000
32.750
81.750
95.750
130.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
74.250
83.500
106.500
108.000
85.500
106.500
136.750
146.250
89.040
128.943
148.500
NOTE
* For HDMI/DVI cable connection, you must use the HDM_ _NI(DV_)jack.
* The interlace mode is not supported.
* The set may operate abnormally if a non-standard video format is selected.
* Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
+/-
-/+
_/+
_/+
_/+
_/+
+/+
+/+
+/+
+/+
+/+
+/+
+/+
+/+
-/+
_/+
+/+
+/+
_/+
_/+
_/+
-/+
+/+
n ,,sh13
[PC550]BN68 02580A Eng.indb 13 2010 02 10 25 4:50:55

Connections
Source List
Use to select TV or an external input sources
such as a DVD/Blu-ray player /cable box /
STB satellite receiver.
[_ MENU rlTI_, input _, Source List
ENTERI_
m
m
SOURCE
TV /PC /AV1 /AV2 /Component1 /
Component2 /HDMI1/DVI /HDMI2 /HDMI3 /USB
(PN500540 /PN580540)
TV /PC /AV1 /AV2 /Component1 /Component2
/HDMI1/DVl /HDMI2 /HDMI3 /HDMI4 /USB
(PN500550 /PN500590 /PN580550 /PN580590)
You can only choose external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted.
In the Source List, PC is always activated.
Edit Name
{_ MENUiTrl _ input _ Edit Name _ ENTERI_
VCR /DVD /Cable STB /Satellite STB /PVR STB /
AV Receiver /Game /Camcorder /PC /DVI PC /DVI
Devices /TV /IPrv /Blu-ray /HD DVD /DMA: Name
the device connected to the input jacks to make your
input source selection easier.
When a PC with a resolution of 1920 x 1080 @60Hz is
connected to the NDM_ _NI(DVm)port, you should set
to DVl PC mode under Edit Name.
When connecting an HDMI/DVI cable to the HDM_ IN
I(DVl I port, you should set to DVl PC or DVI Devices
mode under Edit Name.
Basic Features
Before using the T_, follow the steps below to learn how to
navigate the menu and select and adjust different functions.
.........................MENU
O MENU button: Displays the main on-screen menu.
ENTERIZ_ /Direction button: Move the cursor and
select an item. Confirm the setting.
RETURN button: Returns to the previous menu.
EXIT button: Exits the on-screen menu.
How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.
MENU ITrl The main menu options appear on
Picture,thescreemsound,C,annei,Setup,
input, Application, Support.
T Select an icon with the A or T
button.
ENTER E_ Press ENTERI_ to access the
isub-menu.
A1T Select the desired submenu with
the A, or T button.
</!1_ Adjust the value of an item with the
thetheorse,ectedOSD" button,maYmenu,d,fferThedepend,ngadjustmenton,n
ENTER _ Press ENTERI_ to confirm the
selection.
EXIT -4j Press EXIT.
4 English
[PC550]BN68 02580A Eng.indb 14 2010 02 10 2_ 4:50:55

Seeing Channels
Channel List
Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
(_ MENU rm -_ Channel _ Channel List
--_ENTERL%_
Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen
by pressing the A /T and ENTERE__
buttons. Then you can watch the selected channel.
Channel Status Display Icons
_/ A channel selected.
V A channel set as a Favorite.
(_) A reserved Program.
Using Favorite Channels
(_ MENU ITTI_ Channel --_Channel List --_ ENTERI_%_
Add to Favorite /Delete from Favorite
Set channels you watch frequently as Favorites,
1. Select a channel and press the TOOLS button,
2. Add or delete a channel using the Add to Favorite or
Delete from Favorite menu respectively.
Ill (_ All Channels: Shows allcurrently available
channels.
Ill _ Added Channels: Shows all added channels.
Ill _ Favorite: Shows all favorite channels.
Ill ('_ Programmed: Shows all currently reserved
programs.
Using the color buttons with the Channel List
" Q Red (Antenna): Switches to Air or Cable.
. [_ Green (Zoom): Enlarges or shrinks a channel
number.
" ;_ Yellow (Select): Selects multiple channel lists.
Select desired channels and press the Yellow button
to set all the selected channels at the same time. The
_/mark appears to the left of the selected channels.
" v_(Page): Move to next or previous page.
" _-_ (Tools): Displays the Channel List option menu.
(The options menus may differ depending on the
situation.)
Toshow all Favorite channels, click on the
button shown on the rignt.
Memorizing channels
(_ MENUITTI _ Channel --_ ENTERE__}_
Antenna (Air /Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i,e.an Air or a Cable system).
Auto Program
m Air: Air antenna signal.
m Cable: Cable antenna signal.
m Auto: Air and Cable antenna.
English 15
[PC550]BN68 02580A Eng.indb 15 2010 02 10 2_ 4:50:57

Basic Features
m NOTE
* When selecting the Cable TV system: STD, HRC
and IRC identify various types of cable TV systems.
Contact your local cable company to identify the
type of cable system that exists in your particular
area. At this point, the signal source has been
selected.
* After allthe available channels are stored, it starts
to remove scrambled channels. The Auto program
menu then reappears.
Editing Channels
{_ MENU iTrl_ Channel _ Channel List _ ENTERI_
Channel Name Edit
1. Select a channel and press the TOOLS button.
2. Edit the channel name using the Channel Name Edit
menu.
Ill Channel Name Edit (analog channels only): Assign your
own channel name.
Other Features
{_ MENU iTrl_ Channel _ ENTERI_
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20-30 minutes.
How to Stop Searching Scrambled Channels
1. Press the ENTERIZ_ button to select Stop.
2. Press the _ button to select Yes.
3. Press the ENTERI_ button.
This function is only available in Cable mode.
Channel List
Channel List Option Menu
(inChannel List)
Set each channel using the Channel List menu options (Add
/Delete, Timer Viewing, Select All /Deselect All), Option
menu items may differ depending on the channel status.
1. Select a channel and press the TOOLS button.
2. Select a function and change its settings.
Ill Add /Delete: Delete or add a channel to display the
channels you want.
NOTE
* All deleted channels will be shown on the All
Channels menu.
* A gray-colored channel indicates the channel
has been deleted.
* The Add menu only appears for deleted
channels.
* Delete a channel from the Added Channels or
Favorite menu in the same manner.
Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the _ /!_ /A/_' buttons to select the
desired channel in Channel List.
2. Press the TOOLS button, then select Timer
Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote for
entering the date and time.
Ifyou selected Once, Every Week, or Every
Day in Repeat, you can enter the date you
want.
4. Select OK, then press the ENTERI_ button when
done.
6 English
[PC550]BN68 02580A Eng.indb 16 2010 02 10 2_ 4:50:58

m
m
NOTE
* Only memorized channels can be reserved.
* Reserved programs will be displayed in the
Programmed menu.
* When a digital channel is selected, press the !_
button to view the digital program.
Select All: Select all the channels in the channel list.
Deselect All: Deselect all the selected channels.
You can only select Deselect All when one or
more channels are selected.
Programmed
(inChannel List)
You can view, modify or delete a show you have reserved
to watch, Programmed timer viewing is displayed here,
Highlight a program and press the TOOLS button to display
Options.
[] Change Info: Change a show you have reserved to
watch. Begin with step 3 of "Timer Viewing," above.
[] Cancel Schedules: Cancel a show you have reserved
to watch.
This deletes the highlighted or selected
program(s).
[] information: Display a show you have reserved
to watch. (Youcan also change the reservation
Information.)
Alternatively, you can view Information by
highlighting a program and pressing the
ENTER_ button.
m Select All /Deselect All: Select or deselect all reserved
programs.
Fine Tune
(analog channels only)
Ifthe reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. Ifthe signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
is clear.
Settings are applied to the channel your currently
watching.
Fine tuned channels that have been saved are marked
with an asterisk .....on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset.
Changing the Preset Picture Mode
{_ MENU rlTI-_ Picture -_ Mode -_ ENTERE_
Mode
Select your preferred picture type.
[] Dynamic: Suitable for a bright room.
[] Standard: Suitable for a normal
environment.
[] Movie: Suitable for watching movies in a
dark room.
Adjusting Picture Settings
{_ MENUITTI _ Picture --_ ENTERI_
Cell Light /Contrast /Brightness /
Sharpness /Color /Tint (G/R)
Yourtelevision has several setting options for picture quality
control.
NOTE
* When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
* In PC mode, you can only make changes to
Cell Light, Contrast and Brightness.
* Settings can be adjusted and stored for each
external device connected to the TV.
* Lowering picture brightness reduces power
consumption.
Economical Solutions
{_ MENUITTI _ Picture -_ Eco Solution -_ ENTERE_
Eco Solution
[] Energy Saving (Off /Low /Medium /High /Picture
Off): This adjusts the brightness of the TV in order to
reduce power consumption. Ifyou select Picture Off,
the screen is turned off, but the sound remains on. Press
any button to turn on the screen again. Untilthe screen
turns on again, a distorted picture will be displayed for
about 4 seconds.
English 17
[PC550]BN68 02580A Eng.indb 17 2010 02 10 25 4:50:59

Basic Features
Ill Eco Sensor (Off /On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
Ifyou adjust the Cell Light, the Eco Sensor will
be set to Off.
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
Ill No Signal Power Off (Off /15 min. /30 min. /60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
Disabled when the PC is in power saving mode.
Changing the Picture Options
Advanced Sett!ngs .....................................................................................................
(_ MENU rlTI_ Picture _ Advanced Settings
ENTERI_
(Advanced Settings are available in Standard /Movie mode)
Compared to previous models, new Samsung TVs have a
more precise picture.
In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.
Ill Color Space (Auto /Native): Adjust the range of colors
available to create the image.
Ill White Balance: Adjust the color temperature for a more
natural picture.
R-Offset /G-Offset /B-Offset: Adjust each color's (red,
green, blue) darkness.
R-Gain /G-Gain /B-Gain: Adjust each color's (red,
green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
Ill Flesh Tone: Emphasize pink "Flesh Tone."
Ill Edge Enhancement (Off /On): Emphasize object
boundaries.
P!cture OPt! ons ...............................................................................................................................................................................
(_ MENU rlTI_ Picture _ Picture Options
ENTER I_
In PC mode, you can only make changes to the Color
Tone, Size and Screen Burn Protection.
Ill Color Tone (Cool /Normal /Warm1 /Warm2)
Warm1 or Warm2 will be deactivated when the picture
mode is Dynamic.
Settings can be adjusted and stored for each external
device connected to an input on the TV.
m
m
m
m
Black Tone (Off /Dark /Darker /Darkest): Select the
black level to adjust the screen depth.
Dynamic Contrast (Off /Low /Medium /High): Adjust
the screen contrast.
Gamma: Adjust the primary color intensity.
RGB Only Mode (Off/Red /Green /Blue): Displays
the Red, Green and Blue color for making fine
adjustments to the hue and saturation.
8 English
[PC550]BN68 02580A Eng.indb 18 2010 02 10 £_ 4:50:59

mSize: Your cable box/satellite receiver may
have its own set of screen sizes as well.
However, we highly recommend you use
16:9 mode most ofthe time.
16:9: Sets the picture to 16:9 wide mode.
Zoom1 : Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
Available for HD 1080i /720p signal in 16:9 mode.
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p /1080i /1080p) or Component
(1080i /1080p) signals are inputted.
NOTE
* After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the I_ button to select Position.
2. Press the ENTERC_ button.
3. Press the A or • button to move the picture up
or down.
4. Press the ENTERE_ button.
5. Press the I_ button to select Reset,
6. Press the ENTERI_ button to reset the picture
to its default position.
* After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you made need to
center the picture:
1. Press the _ or !_ button to select Position.
2. Press the ENTERI_ button.
3. Press the A, _', _ or !_ button to move the
picture.
4. Press the ENTERC_ button.
5. Press the _ or _ button to select Reset.
6. Press the ENTERI_ button.
* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
* Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
ATV,AV, 16:9, Zoom1,
Component (480i, 480p) Zoom2, 4:3
DTV(1080i), 16:9, 4:3, Wide Fit,
Component (1080i, 1080p), Screen Fit
HDMI (720p, 1080i, 1080p)
PC 16:9, 4:3
ml Digital Noise Filter (Off /Low /Medium /High /Auto
/Auto Visualization): Ifthe broadcast signal received
by your TV is weak, you can activate the Digital Noise
Filter feature to reduce any static and ghosting that may
appear on the screen.
When the signal isweak, try other options until the
best picture is displayed.
Auto Visualization: When changing analog channels,
displays the intensity of the current signal and defines
the screen noise filter.
Only available for analog channels.
When bar is green, is that the best possible signal.
ml MPEG Noise Filter (Off /Low /Medium /High /
Auto): Reduces MPEG noiseto provide improved
picture quality.
ml HDMI Black Level (Normal /Low): Selects the black
level on the screen to adjust the screen depth.
Available only in HDMI mode.
ml Film Mode (Off /Auto1 /Auto2 /Cinema Smooth):
Sets the TV to automatically sense and process film
signals from allsources and adjusts the picture for
optimum quality.
Available in TV, AV, COMPONENT (480i/1080i)
and HDMI (480i/1080i).
Cinema Smooth mode is available in PN500590/
PN580590 model only.
ml Screen Burn Protection: To reduce the possibility of
screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to
program the time between movement of the picture in
minutes.
English 19
[PC550]BN68 02580A Eng.indb 19 2010 02 10 2_ 4:51:00

Basic Features
Pixel Shift (Off /On): Using this function, you can
minutely move pixels on the PDP in horizontal or vertical
direction to minimize after images on the screen.
Optimum condition for pixel shift
Setting up the TV with Your PC
Set the input source to PC.
(_ MENUiTrl _ Picture --_ ENTERE_
Horizontal 0~4 4
Vertical 0~4 4
Time(minute) 1~4rain. 4rain.
The Pixel Shift value may differ depending on the
TV size (inches) and mode.
This function is not available in the Screen Fit
mode.
Auto Protection Time (10 min. /20 min. /40 min. /1
hour/Off): Set the time the screen remains idle with a
still image until the screen saver is activated. The Screen
Saver prevents the formation of ghost images on the
screen.
Scrolling: This function removes after-images on the
screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after-images or symbols on the screen, especially when
you displayed a still image on the screen for a long time.
The after-image removal function has to be
executed for a long time (approximately 1 hour)
to effectively remove after-images on the screen.
If the after-image is not removed after performing
the function, repeat the function again.
Press any key on the remote control to cancel this
feature.
Side Gray (Light /Dark): When you watch TV with the
screen ratio set to 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme
left and right sides.
Picture Reset (OK!Cance0 ..............................................................................................
Resets your current picture mode to its default settings.
Auto Adjustment ..........................................................................................................................
Adjust frequency values/positions and fine tune the settings
automatically.
Not available when connecting with an HDMI/DVI cable.
Screen
Ill Coarse /Fine: Removes or reduces picture noise. Ifthe
noise is not removed by Fine-tuning alone, then adjust
the frequency asbest as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust
the picture so that it is aligned to the center of screen.
Ill Position: Adjust the PC's screen positioning if it does
not fit the TV screen. Press the A or T button to adjust
the Vertical-Position. Press the _ or !_ button to adjust
the Horizontal-Position.
Ill Image Reset: Resets the image to default settings.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card,
the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung
Dealer.)
1. Click on "Control Panel" on the Windows start menu.
2. Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.
3. Click on "Display" and a display dialog box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
• The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]
• If a vertical-frequency option exists on your display
settings dialog box, the correct value is "60" or "60 Hz".
Otherwise, just click "OK" and exit the dialog box.
0English
[PC550]BN68 02580A Eng.indb 20 2010 02 10 £_ 4:51:00