5
1. PRECAUTIONS(SAFETY WARNINGS)
ƽUpon electronic Control system repair/change, make sure the set unplugged.
Be ware of electric shock.
ƽUse rated electronic Control equipment.
Make sure to check out ModeL name, Rated voltage, Rated current, Operation Temp, etc.
ƽUpon repair, make sure that harnesses are not to be water-penetrated and are bundled tight.
Should not be detached by a certain amount of external force.
ƽUpon repair, completely remove dust or other foreign substances from housing, harness,
connector, etc.
To prevent fire by tracking, short, etc.
ƽCheck out whether water has penetrated into the electronic Control system.
If there is any kind of trace, take necessary measures such as related component change,
insulation tapping, etc.
ƽAfter repair, check out the assembled state of parts.
It should be the same as the previous state.
ƽCheck out the surrounding conditions.
Change the location, if the fridge is located at humid, wet places or the installed state is
unstable.
ƽIf needed, ground the fridge.
Especially, if there is a possibility of electric leakage, ground is indispensable.
ƽDo not allow consumers to overload a certain outlet.
ƽCheck out whether the power cord or the outlet is broken, squeezed, chopped off or heat-
deformed.
Repair or replace the defective power cord/outlet immediately.
Make sure the power cord is not punctuated or stomped down.
ƽDo not allow consumers to keep food unstable or place bottles in the Freezer Room.
ƽDo not allow consumers to repair the fridge for themselves.
ƽDo not allow consumers to keep things except for food.
Pharmaceutical, Chemical substances : These are not possible to be fine-Controlled with a
consumer fridge.
Flammable material (alcohol, benzene, ether, LPG, etc) : possibility of explosion.
