Safety information _05
- There is a risk of electric
shock or fire.
•Do not use a cord that
shows cracks or abrasion
damage along its length or at
either end.
•Do not bend the power cord
excessively or place heavy
articles on it.
•Do not use aerosols near the
refrigerator.
- Aerosols used near the
refrigerator may cause an
explosion or fire.
•Do not install this appliance
in a location where gas may
leak.
- This may result in an electric
shock or fire.
•The installation or any
service of this appliance
is recommended by a
qualified technician or
service company.
- Failing to do so may result
in an electric shock, fire,
explosion, problems with the
product, or injury.
•This refrigerator must be
properly installed and located
in accordance with the
manual before it is used.
•Do not install the refrigerator
in a damp place or place
where it may come in
contact with water.
- Deteriorated insulation of
electrical parts may cause an
electric shock or fire.
•Connect the power plug in
proper position with the cord
hanging down.
- If you connect the power
plug upside down, wire can
get cut off and a cause fire or
an electric shock.
•Do not use a cord that
shows cracks or abrasion
damage along its length or at
either end.
•Make sure that the power
plug is not squashed or
damaged by the back of the
refrigerator.
•When moving the refrigerator,
be careful not to roll over or
damage the power cord.
- This constitutes a fire hazard.
•The appliance must be
positioned so that the plug is
accessible after installation.
•Keep the packing materials
out of reach of children.
- There is a risk of death from
suffocation if children put
them on their head.
DA68-02916A (EN)-04.indd 5 13. 7. 24. �� 4:59