Samsung SCB-2020 User manual

Compact High Resolution
ATM Camera
User Manual SCB-3020
SCB-2020

Compact High Resolution ATM Camera
User Manual
Copyright
©2010 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be
reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal
guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own respon-
sibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the
problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
If the system behaves abnormally because you run a program irrelevant to the system operation.
Deteriorated performance or natural worn-out in process of time
•
•
C
W
A
T
O
M
T
O
A
C
IF
W
A
B
U
I
N
E
•
•
•
1.
2.

3
Safety information
CAUTION
RISK OF ELECTRIC SHOCK.DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING A RISK OF
ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY ATTACHED TO THE FLOOR/WALL IN
ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.
IF THIS POWER SUPPLY IS USED AT 240V AC, A SUITABLE PLUG ADAPTER SHOULD BE USED.
WARNING
BE SURE TO USE ONLY THE STANDARD ADAPTER THAT IS SPECIFIED IN THE SPECIFICATIO N SHEET.
USING ANY OTHER ADAPTER COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE TO THE PRODUCT.
INCORRECTLY CONNECTING THE POWER SUPPLY OR REPLACING BATTERY MAY CAUSE EXPLOSION, FIRE,
ELECTRIC SHOCK, OR DAMAGE TO THE PRODUCT.
•
•
•
1.
2.

4– High Resolution Compact ATM Camera
Safety information
DO NOT CONNECT MULTIPLE CAMERAS TO A SINGLE ADAPTER. EXCEEDING THE CAPACITY MAY CAUSE
ABNORMAL HEAT GENERATION OR FIRE.
SECURELY PLUG THE POWER CORD INTO THE POWER RECEPTACLE. INSECURE CONNECTION MAY CAUSE FIRE.
WHEN INSTALLING THE CAMERA, FASTEN IT SECURELY AND FIRMLY. THE FALL OF CAMERA MAY CAUSE
PERSONAL INJURY.
DO NOT PLACE CONDUCTIVE OBJECTS (E.G. SCREWDRIVERS, COINS, METAL PARTS, ETC.) OR CONTAINERS FILLED
WITH WATER ON TOP OF THE CAMERA. DOING SO MAY CAUSE PERSONAL INJURY DUE TO FIRE, ELECTRIC SHOCK,
OR FALLING OBJECTS.
DO NOT INSTA
LL THE UNIT IN HUMID, DUSTY, OR SOOTY LOCATIONS. DOING SO MAY CAUSE FIRE OR
ELECTRIC SHOCK.
IF ANY UNUSUAL SMELLS OR SMOKE COME FROM THE UNIT, STOP USING THE PRODUCT. IN SUCH CASE,
IMMEDIATELY DISCONNECT THE POWER SOURCE AND CONTACT THE SERVICE CENTER. CONTINUED USE
IN SUCH A CONDITION MAY CAUSE FIRE OR ELECTRIC SHOCK.
IF THIS PRODUCT FAILS TO OPERATE NORMALLY, CONTACT THE NEAREST SERVICE CENTER.
NEVER DISASSEMBLE OR MODIFY THIS PRODUCT IN ANY WAY. (SAMSUNG IS NOT LIABLE
FOR PROBLEMS CAUSED BY UNAUTHORIZED MODIFICATIONS OR ATTEMPTED REPAIR.)
WHEN CLEANING, DO NOT SPRAY WATER DIRECTLY ONTO PARTS OF THE PRODUCT. DOING SO
MAY CAUSE FIRE OR ELECTRIC SHOCK.
3.
4.
5.
6.
7.
8.
9.
10.
CA
D
F
D
T
S
I
P
R
N
K
I
A
S
A
W
T
FC
C
THI
S
FO
L
1)
T
1.
2.
3.
4.
5.
6.
7.
8.
9.

5
E
.
L
LED
O
CK,
R
A
SE,
U
SE
T
ER.
O
CAUTION
DO NOT DROP OBJECTS ON THE PRODUCT OR APPLY STRONG BLOWS TO IT. KEEP AWAY
FROM A LOCATION SUBJECT TO EXCESSIVE VIBRATION OR MAGNETIC INTERFERENCE.
DO NOT INSTALL IN A LOCATION SUBJECT TO HIGH TEMPERATURE (OVER 50°), LOW
TEMPERATURE (BELOW -10°), OR HIGH HUMIDITY. DOING SO MAY CAUSE FIRE OR ELECTRIC
SHOCK.
IF YOU WANT TO RELOCATE THE ALREADY INSTALLED PRODUCT, BE SURE TO TURN OFF THE
POWER AND THEN MOVE OR REINSTALL IT.
REMOVE THE POWER PLUG FROM THE OUTLET WHEN THERE IS A LIGHTING STORM.
NEGLECTING TO DO SO MAY CAUSE FIRE OR DAMAGE TO THE PRODUCT.
KEEP OUT OF DIRECT SUNLIGHT AND HEAT RADIATION SOURCES. IT MAY CAUSE FIRE.
INSTALL IT IN A PLACE WITH GOOD VENTILATION.
AVOID AIMING THE CAMERA DIRECTLY TOWARDS EXTREMELY BRIGHT OBJECTS SUCH AS
SUN, AS THIS MAY DAMAGE THE CCD IMAGE SENSOR.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED
WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
THE MAINS PLUG IS USED AS A DISCONNECT DEVICE AND SHALL STAY READILY OPERABLE AT ANY TIME.
FCC STATEMENT
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS :
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
1.
2.
3.
4.
5.
6.
7.
8.
9.
Safety information

6– High Resolution Compact ATM Camera
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Caution
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL
DEVICE, PURSUANT TO PART 15 OF FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE
PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL
ENVIRONMENT.
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED
AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO
RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE
AT HIS OWN EXPENSE.
IC COMPLIANCE NOTICE
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE.-CAUSING EQUIPMENT REGULATIONS OF ICES-003.
Safety information

7
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return
systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product
should not be disposed of with other household waste at the end of their working life. Where
marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not
properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
E
E
D
Safety information

8– High Resolution Compact ATM Camera
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus.
Unplug this apparatus when a card is used. Use caution when moving the cart/ apparatus combination
to avoid injury from tip-over.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the apparatus
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.

9
Contents
Introduction
Features .................................................. 10
PRODUCT & ACCESSORIES .................................................. 11
Part Names and Functions .................................................. 12
Installation
Connecting the Remote Controller .................................................. 15
Connecting to Monitor .................................................. 16
Connecting to Power .................................................. 16
How to use OSD Menu
Using Icons in the Menu .................................................. 17
Main Menu .................................................. 17
PROFILE .................................................. 18
Camera Setup .................................................. 22
INTELLIGENCE .................................................. 30
PRIVACY ZONE SETUP .................................................. 33
OTHER SET .................................................. 35
SYSTEM INFORMATION .................................................. 36
Specifications
Specifications .................................................. 37
Dimensions .................................................. 40
der
e
n
t
the

10 – High Resolution Compact ATM Camera
Introduction
Features
High Resolution
High Resolution This camera has realized high resolution of 600 lines using the top-of the range full digital
image processing and special algorithm technologies.
VPS(Virtual Progressive Scan)
This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality
recording and file transfer via the Internet. (For SCB-2020, the VPS option is not available.)
Intelligent Motion Detection & Tracking
This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it
sounds an alert if an object passes / enters /exits the virtual fence or virtual area.
WDR
WDR extends the contrast range as it takes a picture of each of dark and bright areas before compositing the
two, which is useful if you take a picture of windows inside a building. Namely, it improves the picture quality
of the outdoor scenery as well as indoor. (For SCB-2020, the WDR mode is not available.)
XDR (eXtended Dynamic Range)
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain
pixel unit to determine the optimal visibility.
High Sensitivity
Adopted SONY Super-HAD PS CCD (SCB-3020)/Super-HAD IT CCD (SCB-2020) which enables super sensitive video
acquisition.
Low Illumination
Low illumination feature enabled by the digital signal processing technology that allows recording in a lowest illumination where
nearly no light is received.
Superior Backlight Adjustment
When an object has a bright illumination or sunlight behind it, this camera automatically improves the shaded
object picture quality.
❖
•
❖
•
❖
•
❖
•
❖
•
❖
•
❖
•
❖
•
D
R
O
C
❖
•
❖
•
❖
•
❖
•
•
P
R
P
❖
•

11
Introduction
ality
the
l
ity
t
ain
e
o
e
re
d
ed
Digital Power Synchronization
The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the
operationability and reliability of this camera.
Random Trigger Function
Recording video while synchronized to a random trigger signal is available. (This feature is not supported by
SCB-2020.)
Output Signal Setting
You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy,
Horizontal/Vertical profiling, and digital zooming.
Coaxial Cable Communication
This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the control
signal. In installation or repair, this helps you control the communication controller (optional) without additional cabling.
❖
•
❖
•
❖
•
❖
•
Main Product •
PRODUCT & ACCESSORIES
Product & Accessories❖
Accessories •High Resolution Compact
ATM Camera
User Manual SCB-3020
SCB-2020
User Manual
Screw (2EA)8PIN Connector Cable Tie (1EA)

12 – High Resolution Compact ATM Camera
Introduction
PART NAMES AND FUNCTIONS
Front❖
Lens 3.7mm (F2.0)
Bracket Used to fix the product on a wall or ceiling.
Video Out Outputs camera’s video signal, which is to be connected to a monitor’s Video In. The port can be
used for menu control if connected with a controller.
Power In Power cable is connected to this terminal.
L/L PULSE Clock port for LINE-LOCK control.
GND Grounding port.
ALM.OUT Alarm out port for camera’s alarm signal output.
n
o
p
q
r
s
t
ALM.OUR
L-PULSE
GND
o
n
p
q
r
s
t
P
o

n
R
❖

13
Introduction
b
e
Port for camera’s firmware update. For further details, refer to the below table:
NO Port Name Description
1 EXT-IN Input port for random trigger.
2 KEY-E Input port for multiplexed analog voltage key.
3 GND Grounding port for the board.
4 DSPSTB Selection port for JTAG upgrade chip.
5 DSPSDI Input port for JTAG upgrade data.
6 DSPSDO Output port for JTAG upgrade data.
7 DSPSCK Clock port for JTAG upgrade clock.
8 FSPE Selection port for JTAG upgrade mode.

Sample KET-E port’s external connection is
shown in the right.
n
Rear❖
1. EXT-IN
2. KEY_E
3. GND
4. DSPSTB
5. DSPSDI
6. DSPSDO
7. DSPSCK
8. FSPE
1. L/L PULSE
2. Alarm_out
3. GND
4. Video out
5. GND
6. V+12V
1.
EXT
-
IN
2
.
KEY
_
E
3
.
G
ND
4. DSPST
B
5. DSPSDI
6. D
S
P
S
D
O
7. D
S
P
SC
K
8. FSPE
1. EXT-IN
2. KEY_E
3. GND
4. DSPSTB
5. DSPSDI
6. DSPSDO
7. DSPSCK
8. FSPE

14 – High Resolution Compact ATM Camera
Introduction
Port for camera’s firmware update. For further details, refer to the below table:
NO Port Name Description
1 L/L PULSE Clock port for LINE-LOCK control.
2 Alarm_out Alarm out port for motion detection.
3 GND Grounding Port.
4 Video out
This is connected to the Video Input Port of the monitor and it outputs
the Video signals.
5 GND Grounding Port.
6 V+12V Input port for DC 12 V power.
o
C
O
To
c
C
C
1.
2.
❖
1. EXT-IN
2. KEY_E
3. GND
4. DSPSTB
5. DSPSDI
6. DSPSDO
7. DSPSCK
8. FSPE
1. L/L PULSE
2. Alarm_out
3. GND
4. Video out
5. GND
6. V+12V
1
. L/L Pulse
2
.
Ala
rm
ou
t
3
.
G
N
D
4. Video out ou
5
. GN
D
6
.
V
+1
2V
1. L/L PULSE
2. Alarm_out
3. GND
4. Video out
5. GND
6. V+12V
Rear❖

15
Installation
CONNECTING THE REMOTE CONTROLLER
To control the camera, a remote controller should be connected to.
POWER
POWER
ADDRESS
(X)100 (X)10
TERMINATION PROTOCOL
1
ON
2345678
(X)1
OFF ON
STATUS
CABLE
COMPENSATION
SL
5
0
4
9
3
8
2
7
1
6
5
0
4
9
3
8
2
7
1
6
5
0
4
9
3
8
2
7
1
6
1
ON
2
REMOTE CONTROLLER SPC-300
Connect the camera’s video out port to the CONTROLLER’s VIDEO IN.
Connect the CONTROLLER’s VIDEO OUT port to a monitor’s video in.
You can use the menu as following :
- Press and hold [ENTER]: Moves to the main menu screen.
- Press [ENTER] briefly: Used to confirm the current settings.
-
Four Direction Keys: Used to move the cursor up/down or left/right.
1.
2.
❖
<CONTROLLER>

16 – High Resolution Compact ATM Camera
Installation
CONNECTING TO MONITOR
Connect the Video Output jack to the VIDEO-IN jack of monitor.
CCTV Camera Monitor
VIDEO
POWER
CONNECTING TO POWER
Connect the adaptor to the power input terminal as shown in the figure below.
The recommended adaptor specification for SCB-3020/SCB-2020 is DC 12V / 500mA.
VIDEO
POWER
U
S

E
B
s

R

U
P
O
i
f

U
P
O
r
•
•
•
•

17
USING ICONS IN THE MENU
(EXIT)
Exits the menu setting.
Before you exits the menu setting, select SAVE to
save your settings, or select QUIT to cancel.
(RET)
Returns to the previous menu.
(SAVE)
Used to save your settings of MASK AREA,
PRIVACY ZONE and more.
Once you save your settings, they will remain even
if you select QUIT in the menu.
(DEL)
Used to deletes your settings of MASK AREA,
PRIVACY ZONE and more.
Once you delete your settings, they will not be
restored even if you select QUIT in the menu.
•
•
•
•
MAIN MENU
MAIN MENU
PROFILE 
CAMERA SET
INTELLIGENCE
PRIVACY ZONE
OTHER SET
SYSTEM INFO

PROFILE
You can set a mode according to the camera
installation conditions.
CAMERA SET
Configure Camera related functions and data.
INTELLIGENCE
You can configure the settings of motion detection,
tracking and more.
PRIVACY ZONE
You can configure the privacy related settings.
OTHER SET
You can configure for Factory Defaults, and more.
SYSTEM INFO.
Shows the Camera Version and System Information.
•
•
•
•
•
•
How to use OSD Menu

18 – High Resolution Compact ATM Camera
How to use OSD Menu
PROFILE
e PROFILE f
STANDARD
ITS
BACKLIGHT
DAY/NIGHT
GAMING
CUSTOM

In the PROFILE menu, you can configure the following camera settings at once.
<SCB-3020>
CAMERA SET Menu
STANDARD ITS BACKLIGHT DAY/NIGHT GAMING
Previous Menu Sub-menus
VPS OFF ON OFF OFF OFF
IRIS
ELC ELC ELC ELC ELC
ELC - - - - -
LEVEL 0 0 0 0 0
BACKLIGHT OFF OFF WDR OFF OFF
WDR - - - - -
WEIGHT User setting
allowed
User setting
allowed MID User setting allowed
User setting
allowed
WHITE BAL User setting
allowed
User setting
allowed INDOOR User setting allowed
User setting
allowed
MOTION (F.FAST)--- (F.FAST)--- F.FAST (F.FAST)--- SLOW
Pre
v
DN
R
SH
U
SE
N
XD
R
DA
Y
W
H
DE
T

19
How to use OSD Menu
CAMERA SET Menu
STANDARD ITS BACKLIGHT DAY/NIGHT GAMING
Previous Menu Sub-menus
DNR MID MID MID MID MID
SHUTTER (OFF)--- (OFF)--- (OFF)--- (OFF)--- (OFF)---
SENS-UP AUTOx2 AUTOx2 AUTOx2 AUTOx4 AUTOx4
XDR MID MID MID MID MID
DAY/NIGHT
AUTO AUTO DAY AUTO DAY
NIGHT - - - - -
BURST OFF ON OFF OFF OFF
WHITE BAL
DAY DAY/NIGHT DAY DAY/NIGHT DAY
DAY - - - - -
MODE ATW2 ATW1 ATW2 ATW1 ATW1
RED 0 0 0 0 0
BLUE 0 0 0 0 0
NIGHT - - - - -
BRIGHTNESS User setting
allowed MID User setting allowed MID User setting allowed
MODE OFF ATW2 OFF ATW2 OFF
RED User setting
allowed 0User setting allowed 0User setting allowed
BLUE User setting
allowed 0User setting allowed 0User setting allowed
DETAIL 2 2 2 2 2

20 – High Resolution Compact ATM Camera
How to use OSD Menu
<SCB-2020>
CAMERA SET Menu STANDARD ITS BACKLIGHT DAY/NIGHT GAMING
Previous Menu Sub-menus
IRIS
ELC ELC ELC ELC ELC
ELC - - - - -
LEVEL 0 0 0 0 0
BACKLIGHT OFF OFF BLC OFF OFF
MOTION (F.FAST)--- (F.FAST)--- F.FAST (F.FAST)--- SLOW
DNR MID MID MID MID MID
SHUTTER (OFF)--- (OFF)--- (OFF)--- (OFF)--- (OFF)---
SENS-UP AUTOx2 AUTOx2 AUTOx2 AUTOx4 AUTOx4
XDR MID MID MID MID MID
DAY/NIGHT AUTO AUTO DAY AUTO DAY
NIGHT - - - - -
BURST OFF ON OFF OFF OFF
WHITE BAL
DAY DAY/NIGHT DAY DAY/NIGHT DAY
DAY - - - - -
MODE ATW2 ATW1 ATW2 ATW1 ATW1
RED 0 0 0 0 0
BLUE 0 0 0 0 0
Pre
v
W
H
DE
T
I
T
It
B
It
D
It
G
It
❖
❖
❖
❖