Samsung SDZ-330 User manual

SDZ-330
High Sensitivity, Day & Night
30X Zoom Color Camera
INSTRUCTION MANUAL
About this manual
Please read this manual carefully before installing and using the camera. Be sure to keep the manual handy for later
reference.

This installation should be made by a qualified service person and
should conform to all local codes.
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
◆Do NOT use power sources other than that specified.
◆Do NOT expose this appliance to rain or moisture.

COLOR CCD CAMERA User’s Manual
4
COLOR CCD CAMERA User’s Manual
5
Contents
• Features ………………………………………………………………………… 5
• Warning ………………………………………………………………………… 6
• Precautions …………………………………………………………………… 7
• Components and Accessories …………………………………………… 8
• Overview ……………………………………………………………………… 9
■ Top  
 ■Bottom  
 ■Back  
• Connection ……………………………………………………………………… 12
■Connecting To Monitor   
 ■Connecting To Power  
 ■Connecting To Connection   

•External Control Connector
  

•Communication Control Connector
 
• Operating Your Camera …………………………………………………… 16
■Menu Configuration  
 ■Menu Setup   

•CAM TITLE
  

•WHITE BALANCE
  

•BACKLIGHT
 

•MOTION DETECTION
 

•FOCUS
  

•EXPOSURE
  

•SPECIAL
  

•RESET
  

•EXIT
  
• Troubleshooting ……………………………………………………………… 42
• Specification ……………………………………………………………………… 44
• Protocol Command Descripition ……………………………………………… 46
• MEMO……………………………………………………………………………… 52
Fine Picture Quality under Ultra Low
Lighting
SV-III DSP Chip
SDZ-330 features a powerful DSP that can
efficiently remove image noise, producing
crisp and clear images even under low
lighting conditions.
The integrated SV-III DSP Chip and 1/4" high
density CCD allows the user to capture bright,
high-quality images under ultra low lighting
conditions.
- 0.4 Lux in normal color mode.
Motion Detection
Once motion is detected, the camera sends an
alert signal to the processing unit, which, if
used in conjunction with an optional alarm,
can provide effective surveillance of your
property.
30x Optical Zoom
The built-in SDZ-330 optical zoom lens is a
highly durable component. It features auto
focus, auto iris, and zoom functions.
Miscellaneous Functions
Other miscellaneous functions of the camera
include privacy zone masking, digital zoom,
line lock synchronization (INT/LL), freeze,
horizontal inversion, and user-configured
presets.
Control via OSD Menu and
RS-485
The OSD menu and RS-485 pins allow for
remote control of the camera.
The user can also directly control the lens
using external control connection.
High Resolution
Featuring 520TV line horizontal resolution in
color mode and 570TV line horizontal
resolution in BW mode, the camera features
Sony's Double Speed 410,000 pixel CCD and
captures clean, noiseless, high-quality
images.
Day & Night
The camera automatically determines
whether it is night time or day time, selecting
operating mode automatically. The camera
operates in color mode during day light
conditions and BW mode in night conditions
for clearer identification.
Wide Dynamic Range (WDR)
The WDR feature offers powerful
compensation performance and thus allows
for crisp, clear, and perfect light contract
under any environment.
Features

COLOR CCD CAMERA User’s Manual
6
COLOR CCD CAMERA User’s Manual
7
The camera requires regular maintenance.
Do not continue to use if malfunctioning.
Do not Install the camera on a surface that can not support it.
Do not handle the power cable with wet hands.
Do not disassemble the camera.
Do not place the camera in the vicinity of inflammables.
Contact an authorized technician for maintenance and/or servicing.
Prolonged use of the camera in abnormal operating conditions (produces
smoke, overheats, etc.) may result in a fire.
Installation on an unsuitable surface may cause the camera to fall and/or
other hazards.
May result in an electric shock.
May result in a fire, electric shock, and/or other hazards.
May result in a fire and/or other hazards.
Warning Precautions
Do not install under extreme
temperature conditions.
Do not install in high humidity
environment.
Do not install under unstable
lighting conditions.
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
Severe lighting changes or flickering may
hinder normal camera operation.
May lower image quality.Use only under temperature conditions
between -10ºC and +50ºC. Provide good
ventilation when using in high temperature
conditions.
Avoid touching the camera lens.
Do not drop the camera or subject
it to physical shock.
May damage the CCD.May cause a product malfunction.
Never keep the camera face to
strong light directly.

COLOR CCD CAMERA User’s Manual
8
COLOR CCD CAMERA User’s Manual
9
•Exposuretoaspotlightor anobjectemittingstronglightmaycause smearor
blooming.
•Ensurethatthepowersourcecomplieswithnormalspecificationsbeforesupplying
ittothecamera.
Notes
Do not expose the camera to rain
or other types of liquids.
Radioactivity exposure may damage the
CCD.
Wipe dry any liquids. Liquids may contain
minerals that are corrosive to electronic
components.
Do not expose the camera to
radioactivity.
Precautions
Components and Accessories
1 30x Zoom Color Camera SDZ-330
2 InstructionManual
3 6-PinConnectionCable
4 Front Cover Ring
5 Remote Controller (Optional)
12 3 4 5
Overview
1Tripod Mounting Bracket Screw Hole :
Please cover the CCD SENSOR when not using it.
2Front Cover Ring : Removable for replacement with a filter.
Close
Open
Top
1
2
Bottom
3Tripod Mounting Hole
Used to install the camera on an optional tripod.The tripod must be
equipped with screws with specifications shown on the right.
3

COLOR CCD CAMERA User’s Manual
10
COLOR CCD CAMERA User’s Manual
11
Back
4
5
7
8
6
9
❿
4Key Buttons
∙
 Following buttons control zoom, focus, and auto focus functions.
WIDE button : To widen the view. (ZOOM OUT)
TELE button :To close in on a far object. (ZOOM IN)
F-NEAR button :To see a near object clearly.
F-FAR button :To see a far object clearly.
AF button :To activate auto focus just once.
Pressing the 'SET' button locks the zoom control function of these buttons
and prompts the main setup menu.
•Thezoompostionissavedafter5secondswhenyousetzoomfunction.
Notes
OverviewOverview
5External Control Connector :
Relates to the motion detection output signal.
Zoom and focus functions can be controlled using external siganals.
6Power LED : Illuminates when power is supplied.
7Video Output Jack : Used to connect an external video monitor in jack.
8Communication Control Connector :
Used to connect the Remote Controller (Optional). Includes external
'SYNC' signal input pin, which is used for the line lock function.
Includes the RS-485 communication pin.
9Power Input Terminal : Power supply terminal (DC12V±10%).
❿Frame Ground Terminal :
It is the GND terminal of the motion detection signal.
Attach the bracket to the top of the camera. Use screws included
in the package or their equivalent (less than 6mm). Otherwise, the
bracket may not assemble to the camera properly.
∙
 Main setup menu can be navigated using these buttons.
SET :To access the main setup menu.
UP (WIDE button) :To move the arrow indicator to up.
DOWN (TELE button) :To move the arrow indicator to down.
LEFT (F-NEAR button) :To move the arrow indicator to left.
RIGHT (F-FAR button) :To move the arrow indicator to right.
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm(ISOstandard),
or0.197"(ASAstandard)

COLOR CCD CAMERA User’s Manual
12
COLOR CCD CAMERA User’s Manual
13
CCD Camera
Intermediate End monitor
Connect the power cable to the camera's Power In as shown in the figure
below.
Power Input Terminal
Frame Ground
•Connectthepoweroncetheinstallationiscomplete.
•Thewireispolarized.Match'+'and'-'terminalsproperly.
•UseaDC12V/500mApowersourceforSDZ-330.
Notes
Connection
Connect Video Out Jack to the monitor's Video In jack as shown below.
CCD Camera Monitor
• Connection methods may vary depending on the video equipment. Please
refer to the model specific instruction manual.
• Connect cables with the unit powered down.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an
intermediate device.
Connection
FOCUS (Input)
ZOOM (Input)
COM
MD (output)
External Control Connector
Connecting to Monitor Connecting to Power
Connecting to connection

COLOR CCD CAMERA User’s Manual
14
COLOR CCD CAMERA User’s Manual
15
* Communication Control Connector Pin Description .
* EXT. SYNC 3V or 5V
0V
SCC-3000 Remote Controller
SCC-100, SDZ-160CO
6-Pin Connection
Cable
* Communication Setting can set the communication setting as shown in the table below.
When you use to connect SCC-100 or SCC-3000, the default sets for SCC-100.
Min: 500ns
60Hz ± 0.1Hz(NTSC), 50Hz ± 0.1Hz(PAL)
Connection Connection
Connector Function Signal Level I/O
ZOOM
Tele
I
Wide
FOCUS
Far
I
Near
COM -
MD 0
* MD (Motion Detection) Output Signal Level (less than 10mA)
* When using the MD function, the 'GND' should be connected to the frame ground.
The camera can be controlled by using external controllers like a Remote
controller. (RS485 Communication)
There is motion
+4.0V~+5.0V
There is no motion
0V 5±0.5sec
↔
COM
-6V~-12V
COM
+6V~+12V
COM
-6V~-12V
COM
+6V~+12V
COM
Communication Control Connector
•Contactanauthorizedtechnicianforinspection.
Notes
Number Name Description Number Name Description
1GND - 4 TRX + RS-485 Communication
2EXT.SYNC External ‘SYNC’ Signal 5TRX - RS-485 Communication
3GND - 6 Output Power Remote Controller only
ITEM SCC-100 SCC-3000
MODE Serial Serial
Data Bit 8 bit 8 bit
Bit/Sec 9600bps 9600bps
Parity EVEN NON
CAM ID NO. 01~255
RETURN PACKET ENABLE See the SCC-3000 settigs

COLOR CCD CAMERA User’s Manual
16
COLOR CCD CAMERA User’s Manual
17
Menu Configuration
MAIN SETUP
MENU
CAM TITLE
• OFF • ON
WHITE BAL.
• ATW • AWC • MANUAL
BACKLIGHT
• OFF • WDR
MOTION DET.
• OFF • ON
FOCUS
• MODE • ZOOM TRK MODE
• ZOOM TRK SPD • D-ZOOM • DISP ZOOM MAG
• ZOOM INIT POS • LENS INIT • END
EXPOSURE
• BRIGHTENESS • IRIS • SHUTTER
• AGC • SSNR • SENS-UP
• END
SPECIAL
• USER PRESET • PRIVACY • DAY/NIGHT
• SYNC • FREEZE • H-REV
• V-REV • IMAGE ADJ • COMMUNICATION
• END
RESET
EXIT
Menu Setup
Use the six buttons on back of the camera.
UP button
SET button
LEFT button
AF button
DOWN button
RIGHT button
1. Press the SET button to access the main setup mode.
• Main setup menu is displayed on the monitor screen.
2. Select the desired feature using the UP or DOWN button.
• Each pressing of the UP or DOWN button moves the indicator to the next
or previous feature.
• Move the arrow indicator to the desired feature item.
Operating Your Camera

COLOR CCD CAMERA User’s Manual
18
COLOR CCD CAMERA User’s Manual
19
3. Press SET button.
4.You can enter up to 20 characters.
 Move the cursor to the character entry field using the LEFT or RIGHT
button.
 Use UP, DOWN, LEFT, and RIGHT buttons to select a desired character.
 Press the SET button to confirm selection of the blinking character. The
character is then saved, and the cursor in the entry field moves to the
next position.
 Repeat steps  through  until the desired name has been entered.
3. Change the status of the selected feature using the LEFT or RIGHT button.
4. When completed, move the arrow indicator to 'EXIT' and press the SET button.
Use this feature to designate a name for the camera, which will display on the
monitor screen.
1. Press the SET button to display the main setup menu and move the arrow
indicator to 'CAM TITLE' using the UP or DOWN button.
2. Set 'CAM TITLE' to 'ON' using the LEFT or RIGHT button.
•IftheCAMTITLEfeatureis setto'OFF',the
namewillnotdisplayedinthemonitor.
Notes
Change the status using the
LEFT or RIGHT button.
Select feature using the UP or
DOWN button.
Operating Your Camera
•Featuresmarkedwithahaveanaccessiblesubmenu.
•AccessthesubmenubypressingtheSETbutton.
Notes
CAM TITLE
•Correcting Mistakes
Movethecursorto'CLR'andpresstheSETbuttontocleartheentireentry.
Tomodifyonecharacter,use←or →topositionthecursorabovethecharacterto
bemodifiedandclicktheSETbuttonafterselectingthecharactertoenter.
Notes

COLOR CCD CAMERA User’s Manual
20
COLOR CCD CAMERA User’s Manual
21
5. Select on screen position of the CAM TITLE.
 Move the cursor to 'POS' and press SET button.
 The CAM TITLE is displayed on the top-left of the monitor screen.
(Default position)
 Select the position by using the 4-directional buttons, then press the SET
button to confirm the position.
6. When completed, move the cursor to 'END' and press SET button.
FRONT DOOR
FRONT DOOR
Your camera provides three 'WHITE BAL' control modes for your choosing in
adjusting the white balance.
1. Press the SET button to access the main setup menu and move the
indicator to 'WHITE BAL' using the UP or DOWN button.
2. Set 'WHITE BAL' using the LEFT or RIGHT button.
The three white balance control modes are as follows :
ATW(Auto Tracking White Balance) : When color temperature is 1800 ~
10500ºK, select this mode.
AWC (Auto White balance Control) : The white balance is automatically
adjusted in a specific environment. In order to obtain the best result, press the
SET button while the camera focuses on white paper. If the environment
including the light source is changed, you have to adjust the white balance
again.
 Manual : To fine adjust, select the Manual mode. You can increase or decrease
the red or blue factor while monitoring the difference on the screen. Set to
'MANUAL' mode and press the SET button. Increase or decrease the value for
red(R-Gain) and blue(B-Gain), watching the color of the picture, and press the
SET button when you obtain the best color.
Operating Your Camera
WHITE BALANCE

COLOR CCD CAMERA User’s Manual
22
COLOR CCD CAMERA User’s Manual
23
The built-in SVIII DSP chip provides intelligent light level control to overcome the
severe 'BACKLIGHT' conditions.
1. Press the SET button to display the main setup menu and move the arrow
indicator to 'BACKLIGHT' using the UP or DOWN button.
2. SET 'BACKLIGHT' to the desired mode using the LEFT or RIGHT button.
 WDR : Compensates for scenes simultaneously containing bright and dark
elements.
 OFF : Deactivation
WDR OFF
3. Select the ' WDR' mode and Press the SET button
• You can adjust the LIMIT for WDR
4.When completed, press the SET button.
You can select the level(LOW,MIDDLE,HIGH). WDR sensitivity is increased or decreased.
•TheWDRmodecannotbeusedif'ShutterofExposureMenu'issetto'MANUAL'.
•ThefollowingphenomenonmayoccurwhenoperatingundertheWDRmode.In
suchevent,donotcontinueuseundertheWDRmode.

Unnatural color change or screen phenomenon.

Screen noise on bright elements.
•WDR performance vary onbrightonscreenelements.Adjust the cameraangle
accordinglywheninstallingthecameratocompensate.
•MakingchangestotheWDRLIMITmayresultinunnaturalscreenphenomenon.
Notes
alert signal upon detecting motion. When used in conjunction with an external
alarm, the user can receive MD alerts. This feature is useful when monitoring
several screens simultaneously.
1. Press the SET button to access the main setup menu and move the indicator
to 'MOTION DET' using the UP or DOWN button.
2. Set 'MOTION DET' to ON using the LEFT or RIGHT button.
Operating Your Camera
•ProperWhiteBalancemaynotbeobtainedunderthefollowingconditions.

When the scene contains mostly high color temperature object, such as a blue sky
or sunset.

When the scene is dim.

If your camera directly faces a fluorescent lamp or is used in an environment of
varying lighting conditions.
Notes
BACKLIGHT
MOTION DETECTION

COLOR CCD CAMERA User’s Manual
24
COLOR CCD CAMERA User’s Manual
25

Increase or decrease detection sensitivity by setting the 'SENSITIVITY'
value.
·When completed, press SET button.
 Press the SET button.
Notes
1. Press the SET button to access the main setup manu and then position the
indicator over FOCUS using the UP or DOWN button.
2. Press the SET button.
 MODE : You can select the most suitable zoom mode. Move the arrow
indicator to 'MODE' using UP or DOWN button.
 •  AUTO : Select AUTO and press the SET button to confirm. Increase or decrease
optical zoom (ZOOM) or digital zoom (D-ZOOM)
positions using the UP or DOWN button while
verifying the changes on screen. Enabling D-ZOOM
(ON) means that digital zoom will activate once
optical zoom ends. Focus is automatically adjusted
with moving zoom.
Operating Your Camera
FOCUS
Tips on Using the Motion Detection Feature
• Once the sensitivity level has been set, perform a test to verify proper operation of
the feature.
• The feature may not function properly under flickering light conditions.
• The camera interprets sudden changes in lighting and subsequent change in
brightness of an object as motion.
• With the feature enabled, other algorithms may require additional time to operate
than usual.
• This system does not guarantee prevention of fire or theft.
The manufacturer shall not be held responsible for any
accident or damage incurred.
• Connect an external alarm device to MD Out on back of
the camera.

COLOR CCD CAMERA User’s Manual
26
COLOR CCD CAMERA User’s Manual
27
 ZOOM TRK SPD : Configure zoom tracing speed using this feature. Position
the indicator over 'ZOOM TRK SPEED' using the UP or
DOWN button and then set to desired mode using the LEFT
or RIGHT button.
 ZOOM TRK MODE : You can select to use ‘ZOOM TRK MODE’. Move the
arrow indicator to ‘ZOOM TRK MODE’ using UP or
DOWN button. Set ‘ZOOM TRK MODE’ to on using LEFT
or RIGHT button.
•  MANUAL : Select 'MANUAL' and press the SET
button to confirm. Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM) positions using
the directional buttons while verifying the changes
on screen. Press the SET button once desired image
quality is obtained. Focus can be manually adjusted,
independent of moving zoom.
•ONE PUSH : Focus is automatically adjusted just
once, after zoom position is changed. Select ' ONE
PUSH' and press the SET button to confirm. Increase
or decrease optical zoom (ZOOM) or digital zoom
(D-ZOOM) positions using the directional buttons
while verifying the changes on screen. Press the SET
button once desired image quality is obtained.
•  FAST : Tomovezoomfast. •SLOW : To move zoom slowly.
 D-ZOOM : Configure magnification limit from x1, x2, x4, or x8 using this feature.
Position the indicator over 'D-ZOOM' using the UP or DOWN button. Set
'D-ZOOM' to 'ON' and press the SET button to confirm.
 DISP ZOOM MAG : Use this feature to display the current zoom magnification
level on screen. Position the indicator over 'DISP ZOOM
MAG' using the UP or DOWN button. Then set to ON using
the LEFT or RIGHT button.
∙ Set 'ZOOM LIMIT' to the desired level using the LEFT or
RIGHT button.
• The 'ZOOM TRK SPEED' mode cannot be used if 'MODE' is set to 'AUTO' and 'ZOOM
TRK MODE' is 'ON'.
Notes
Operating Your Camera

COLOR CCD CAMERA User’s Manual
28
COLOR CCD CAMERA User’s Manual
29
 LENS INIT : Use this feature to initialize the lens. Position the indicator over LENS
INIT. using the UP or DOWN button. Press the SET button to confirm.
 ZOOM INIT POS : Moves to the controlled ZOOM position when the power truned
on and is a function of the initial ZOOM position control.
 END : To revert to the main setup menu.
1. Press the SET button to access the main setup menu and then position the
indicator over 'EXPOSURE' using the UP or DOWN button.
2. Press the SET button to confirm.
 BRIGHTNESS : Use this feature to adjust image brightness. Position the
indicator over 'BRIGHTNESS' using the UP or DOWN button. Then increase or
decrease brightness level using the LEFT or RIGHT button while verifying the
changes on screen. Set END once desired level is obtained.
Operating Your Camera
EXPOSURE

COLOR CCD CAMERA User’s Manual
30
COLOR CCD CAMERA User’s Manual
31
COLOR CCD CAMERA Userﾕs Manual
30
 IRIS : Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' using the UP
or DOWN button and then select the desired iris mode using the LEFT or RIGHT
button.
•AUTO : The iris is automatically activated upon illumination.
•MANUAL : Manual iris configuration. Set 'IRIS' to 'MANUAL' using the LEFT or
RIGHT button and then press the SET button. Increase or decrease iris
level using the LEFT or RIGHT button while verifying the changes on
screen.
 SHUTTER : Control image brightness by adjusting shutter speed.
1. Position the indicator over 'SHUTTER' using the UP or DOWN button. Then select
the desired shutter mode (A.FLK, ESC, MANUAL) using the LEFT or RIGHT button.
COLOR CCD CAMERA Userﾕs Manual
31
2. If you choose 'MANUAL', select the optimal shutter speed.
∙ In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60
to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL).
* 'Sens-Up' mode can be configured manually (2x to 128x).
∙ Verify changes made to the shutter speed by referencing to changes in on screen
brightness.
• Set the 'WDR' mode under the Backlight menu to OFF for maximum A.FLK
performance. 'A.FLK' will not function properly otherwise.
• Image may become unstable if the camera is set to 'ESC' mode and faces a strong
fluorescent light.
• Under 'ESC' mode, the brightness can be adjusted using the LEFT or RIGHT button.
• The WDR feature is not available under MANUAL mode.
• Sens-up is disabled under 'MANUAL' or 'A.FLK' mode.
Notes
3. Press the SET button to complete.
•A.FLK (NTSC: 1/100, PAL: 1/120) : Flicker-free mode
•ESC : Automatic shutter speed setting (optimal) Manual shutter speed setting
•MANUAL : Manual shutter speed settingsetting
Operating Your Camera

COLOR CCD CAMERA User’s Manual
32
COLOR CCD CAMERA User’s Manual
33
1. Position the indicator over 'AGC' using the UP or DOWN button.
2. Set 'AGC' to the desired mode using the LEFT or RIGHT button.
•HIGH : Wide range gain value adjustment
•MIDDLE : Middle range gain value adjustment
•LOW : Narrow range gain value adjustment
•OFF : Disabled
 AGC (Auto Gain Control) : For brighter images.
 SSNR(Samsung Super Noise Reduction) : On screen noise reduction.
1. Position the indicator over 'SSNR' using the UP or DOWN button.
2. Set 'SSNR' to the desired mode using the LEFT or RIGHT button.
 •LOW : Low noise reduction
 •MIDDLE : Medium noise reduction
 •HIGH : High noise reduction
 •OFF : Disabled
• Changing 'AGC' setting from LOW to HIGH results in greater sensitivity, as well as on
screen noise.
• Setting 'AGC' to OFF locks 'SSNR' configuration.
Notes
 SENS-UP : This feature ensures clear images at night or under low lighting
conditions.
1. Position the indicator over 'SENS-UP' using the UP or DOWN button.
2. Set 'SENS-UP' to the desired mode using the LEFT or RIGHT button.
•AUTO : Select this mode for use in night time or under low lighting conditions.
•OFF : Disabled
• Once 'AUTO' mode is set, the user can configure Sens-Up limit by increasing /
decreasing the shutter speed (e.g.: x2,...,x32, x64,..., x128).
• Enabling Sens-Up increases camera sensitivity and may result in additional noise
and/or other phenomenons. This is normal.
Notes
Operating Your Camera

COLOR CCD CAMERA User’s Manual
34
COLOR CCD CAMERA User’s Manual
35
1. Press the SET button to access the main setup menu and then position the
indicator over 'SPECIAL' using the UP or DOWN button.
2. Press the SET button to confirm.
 USER PRESET : Preset user-designated configurations using this feature. Position
the indicator over 'USER PRESET' using the UP or DOWN button
and then set to 'ON' using the LEFT or RIGHT button. Press the SET
button to confirm.
•PRESET NO : Up to eight different preset configurations are supported.
•PRESET MODE : Configure initial settings under FOCUS, EXPOSURE, etc.
Operating Your Camera
SPECIAL

COLOR CCD CAMERA User’s Manual
36
COLOR CCD CAMERA User’s Manual
37
•PRESET SAVE : Save configured preset.
•PRESET CLEAR : Clear configured preset.
•END : Revert to the SPECIAL SETUP menu.
•GROUP SEL : Choose up to four groups. Each group can consist of eight mask
areas.
•MASK COLOR : Select desired mask color(BLACK, BLUE, GREEN,WHITE).
•AREA SEL : Configure eight mask areas.
•AREA MODE : Mask area display.
•TOP : To move the mask area up.
•BOTTOM : To move the mask area down.
•LEFT : To move the mask area left.
•RIGHT : To move the mask area right.
 PRIVACY : Mask privacy area using this feature. The mask area expand/contract
upon the zoom position.
Operating Your Camera

COLOR CCD CAMERA User’s Manual
38
COLOR CCD CAMERA User’s Manual
39
 DAY/NIGHT : Select from COLOR, BW or AUTO modes.
•COLOR : Color mode.
•B/W : BW mode.
•AUTO : The camera automatically detects lighting conditions and selects the mode
accordingly.
 SYNC : Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK.
In LINE-LOCK mode, it synchronizes the camera's video out signal to the external
SYNC signal.
•INT : Internal synchronization
•LL : External line-lock synchronization
· If you choose 'LL', you can adjust the desired phase.
Press the SET button.
· You can adjust the desired phase from 0 to 359.
• For NTSC models, the line-lock mode can be used if the external SYNC signal
frequency is at 60Hz.
• For PAL models, the line-lock mode can be used if the external SYNC signal
frequency is at 50Hz.
Notes
 FREEZE : Use this feature to freeze capture an image. Position the indicator over
'FREEZE' using the UP or DOWN button and then set to 'ON' using the LEFT
or RIGHT button. Press the SET button to confirm.
 H-REV : Use this feature to horizontally inverse the screen. Position the indicator
over 'H-REV' using the UP or DOWN button and then set to ON using the
LEFT or RIGHT button. Press the SET button to confirm.
Operating Your Camera