Samsung EO-SB330 User manual

2013/10 Rev.1.0

Bluetooth speaker
User manual
www.samsung.com

2
Copyright
Copyright © 2013 Samsung Electronics
This guide is protected under
international copyright laws.
No part of this guide may be
reproduced, distributed, translated,
or transmitted in any form or by any
means, electronic or mechanical,
including photocopying, recording,
or storing in any information storage
and retrieval system, without the
prior written permission of Samsung
Electronics.
• Please read this manual before
using the device to ensure safe and
proper use.
• The illustrations in this user manual
may differ from the actual device.
Device specifications are subject to
change without prior notice and
this document may not have been
updated to reflect these changes.
• Bluetooth
®
is a registered trademark
of Bluetooth SIG, Inc. worldwide.

3
Device layout
Front
Status indicator
[Play/Stop] button
[Volume (-)] button
[Volume (+)] button
[Talk] button
NFC antenna

4
Back
[Pairing ( )] button
[Power] switch
Audio input jack
Power connection
jack
• Check the product box for the wireless speaker, charger (USB power
adapter, USB cable), 3.5 mm audio cable, and user manual. The
items supplied with the device and available accessories may vary
by region.
• The status indicator is visible only when it is turned on.

5
Use only the battery charger
supplied with the product.
Using unapproved chargers
may slow down the
charging process or cause
damage to the product.
Charging the device
This device has a built-in battery.
Charge the battery completely
before using the device for the first
time or after it has not been used for
an extended period.
Connect the charger to the
Bluetooth speaker and plug the
power cord into the power outlet.

6
• To save energy, unplug
the charger when not
in use. The charger does
not have a power switch,
so you must unplug the
charger from the electric
socket when not in use
to avoid wasting power.
The device should remain
close to the electric socket
while charging.
• The socket-outlet shall
be installed near the
equipment and shall be
easily accessible.
• The status indicator turns red
while the device is being charged.
The status indicator turns blue
when charging is complete.

7
• Battery run time is
based on results of tests
performed with factory
default settings.
• The battery charging time
and run times may vary,
depending on the usage
environment.
Charging time and
standard run times
(3,600 mAh)
Charging
time Approx. 2 hrs
Standard
run times
Call time Approx.
15 hrs
Play time Approx.
15 hrs
Standby
time
Approx.
1,800 hrs

8
Charge level Indicator
colour
More than
80 % Blue
30–80 % Purple
Less than 30 % Red
Measuring the battery
charge
Press and hold the [Talk] and
[Volume (-)] buttons simultaneously.
The status indicator flashes 5 times
in different colours, according the
charge left in the battery.

9
• When the device is turned on,
the status indicator flashes blue
4 times.
• When the device is turned off,
the status indicator turns blue
and then flashes red before
turning off.
Turning the device on
or off
Slide the [Power] switch to turn the
device on or off. When you turn on
the device for the first time, it enters
the Bluetooth pairing mode.